Red Hat / Fedora :: 12 External Hard Drive - Install Video Card Drivers Get Black Screen
Sep 17, 2010
i installed Fedora 12 on an external hard drive. Everything went fine with the installation and it was working perfectly until i tried to install my video card drivers. I have done this many times before and it has worked. I have an ATI card. Anyway after installing the driver i rebooted and now when it starts it show the loading bar on the bottom but then nothing happens its just a black screen!. The worst part is that when i go into windows and my external is plugged in windows wont read it and i have very valuable data on it. I go into disk management and it shows up but windows says that its empty. which is obviously not true because Fedora starts to boot. I really just want Fedora off my external and for windows to read my external with all the files still on it. Is there a way to get by that blank screen?
View 2 Replies
ADVERTISEMENT
Mar 25, 2010
After having a lot of trouble with vista and no chance of getting Windows 7 anytime soon, I decided to get Ubuntu and use dual booting with vista. I had recently installed it about two days ago and for the most part it worked pretty well. That is until I installed the driver for my video card, an ATI Radeon HD2600 pro, then things went down hill for me. Every time I try and boot Ubuntu it now goes to a black screen after the logo comes up and i am unable to do anything. I have tried to look up some solutions, but I am still relatively new to programing and some of this stuff seems a bit complicated for me. Is there a simple solution to this that does not require a reinstall?
View 9 Replies
View Related
Jul 28, 2010
I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
View 9 Replies
View Related
Jan 11, 2011
this is my first time doing a custom partition, I tried to do it with only the assistance of reading as I go, but I don't believe I found enough information last night. What I am trying to do, is put openSUSE on 200gb out of 500gb space on my external hard drive, as well as on 50gb space out of 110gb on my internal hard drive. The remaining 60gb space on my internal drive is going to be for microsoft windows. The remaining 300gb space on my external drive will be storage space. It seems like what I want to do is achievable
What I want is to have my main openSUSE on the external drive (primary partition I think?), with the GRUB loader so that when the external drive is not plugged in, my little brother can use windows on my internal hard drive. I tried this last night, and when installation had finished, I rebooted my computer and the screen was just blank black with the flashing white line as if waiting for me to type, although it would not allow me to type when I tried. It would be great if someone could tell me the order in which to partition, including the terms primary partition, extended partition, and logical partition, as needed.. I don't want to permanently muck up this machine.
View 7 Replies
View Related
Jan 8, 2010
When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).
View 3 Replies
View Related
Apr 11, 2010
I'm a little new to ubuntu. I installed a video driver and after restarting I got as far as the login screen where I saw that the driver did not work: screen is mostly black with random bars of color. I was only able to restart in recovery mode mode. I tried the fix graphics option, which did not work and also some commands that I've seen posted in other threads. So far, still cannot delete the problematic driver or boot up normally successfully.
View 1 Replies
View Related
Nov 16, 2009
I'm install CentoS 5.3 but I've not a GUI... when I swith , screen is black... maybe problem in Video Card... I'm download this driver, but I don't know how to install ... Driver is NVIDIA-Linux-x86-190.42-pkg1.run - how CentoS 5.3 work in 256 mb card...
View 1 Replies
View Related
Jan 29, 2011
I am making a switch over to Ubuntu from windows on one of my kids machines.It has a Nvidia video card, a g-force fx 440 i believe, or something like that.Anyway I just loaded up Ubuntu 10.10 and and it seems it does not recognize my video card. If i go tosystem>administration>Additional drivers, the dialog comes back with "No proprietary drivers are used on this system. Ok so now I go to Ubuntu Software center and search nvidia..... I get the option to installl Nvidia binary x.org driver (version 185), I do so
Now in the Additional drivers dialogue it tells me "this driver is active and currently in use". Awsome, Now when I click on Nvidia X Server settings under system>Administration I get the following dialogue."You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."If i do what that last message said, run sudo nvidia-xconfig in the terminal, It gives an error saying the xconfig file is not there, and it will create one. The next time I reboot Ubunut just shows a black dos like screen asking for username and password. If i put it in, it does nothing, I end up having to re-install ubuntu.
View 6 Replies
View Related
Aug 20, 2011
My EVGA 7600GT video card suddenly died. A friend gave me an EVGA GeForce 8400GS to replace. I'm running a homemade AMD Athlon 64 3700 box with 2 GB memory and 2- 250 GB WD hard drives. First drive has Win XP OS and second drive runs Ubuntu 10.04. I was using Ubuntu about 99% of the time before the video failed. After installing new vid card, I deleted old driver in Win and installed new driver off the CD that came with the card. Windows system was then 100% back to normal.
My grub booter is set up to default boot to Ubuntu with Windows the last choice which can be done manually. After installing new Win video driver and confirming it worked, I re-booted the computer and let it go to Ubuntu. The results was the usually flashing cursor for about 10 seconds, but instead of the Ubuntu splash screen popping up, the monitor went black for about a minute and then shut off the same as if I had shut down the computer.
That was over a week ago, Since then I have tried everything I can think of but nothing changes. I have read and tried numerous ideas from other posts on these forums (such as hitting ctrl, alt, +/- to change screen resolution) but I still have a black screen.
I tried booting up from my original install CD which is ver 9.10, not 10.04 (I upgraded to 10.04 by directly downloading online and never made a 10.04 CD). I can get into an Ubuntu desktop with that old CD and I checked to see that it showed the highest resolution for my monitor (a 22" wide flatscreen whose native resolution is high-1920x1280?? don't exactly remember at the moment). I also tried loading the generic Nvidia 185 driver but it didn't seem to take. I downloaded the latest Nvidia driver for Linux onto a thumb drive and tried to install it here, but was refused because the message said it had to go into "root" and I didn't have permission. I don't know how to establish permission when booting from an old install CD. I'm sure I have administration rights under my regular 10.04 installation but can't see it due to the blank screen.
I've tried at boot to go to the recovery mode listed right below the default Ubuntu boot option, but when I do, a whole series of text flashes on the screen and rolls down to the word "done" with a flashing cursor at the very end, The cursor flashes for about 5 seconds and then the screen goes black. I've tried to enter some quick text at the cursor to keep it from going black, but it doesn't stop it. It wants to go black and it does so.
View 9 Replies
View Related
Jan 4, 2011
I recently swapped a hard drive from another computer I was using.The previous computer had nVidia video card (i think it was 9500? something like that), and the new computer has an ATI Radeon 4200 HD video card. Now, when I boot it up on my new comp using the same hard drive, I get a black screen and my monitor just switches from digital, analog, hdmi. I'm guessing that the video card drivers are still installed, but I cannot switch back the hard drive since my other comp is far away from where I live. If I boot up with ubuntu CD however, it loads fine.
I have many important files on the previous install though, and I'm not sure how to get to it. I wouldnt mind reinstalling ubuntu as long as I can get those files back.
View 7 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Aug 1, 2011
My desktop pc was messing up bad and i had too take out the hard drive and put it in my other desktop it works great but theres one thing it dont see my video card how can i get it too look for it? it was a nVidia and now Video adapter Intel Graphics Media Accelerator 950.
View 8 Replies
View Related
Apr 13, 2011
The installer has left me with 1,024 by 768 pixels and a driver that will not reach anything like the res my card and monitor will cope with. The display is currently blanking every 30secs or so for a very brief interval as well.
I may have missed something on the install but there didn't seem to be any opertunity to choose either a driver or monitor type. I was eating my dinner through most of it.
I had a brief flirtation with Mandriva and know that linux should be able to nearly fully support my monitor which is 1680x1050 by Belinea. Earlier open suse install gave the option of seting this sort of thing up and listed all of Berlinea's monitors as well.
The card is an nvidia 210 by Asus. Reported as a 200. I do not want to try installing an nvidia driver yet as I understand that there will be problems. Also I have a YAST ipv6 dns problem = no updates.
View 9 Replies
View Related
Feb 21, 2010
I have been trying to install Ubuntu on my main computer for some time. I think I have two problems: my hard drive and video card. I started with Ubuntu 9.04 but got nowhere. I am now trying Ubuntu 9.10 32 bit. I can at least use the live cd if I put the video on safe mode. Just in case you are wondering, I have tried other distros: Fedora, OpenSUSE, Slitaz, Wolvix, etc. Only Slitaz and Ubuntu 9.10 works on a live cd.
Information on my computer:
OS: Trying to install Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia) Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM Ram: 4 GB (I think, its been awhile since I built this thing) DVD Burner: LG I think I have two problems: the Sata Hard Drive and the Video Card. When I go to install it, I can get to the install menu but from there all I get is a blank screen. I have tried to put the video in safe mode then install it but I get the same result: a blank screen.
How do I know if Ubuntu recognize the Hard Drive and Video Card? I tried the mount command to see what it sees but I didn't notice any Sata Drives. I was told that I may have to do something with the kernel so it will recognize my Hard Drive. How would I do that?
I have been working on this for awhile now. On a side note, does it matter which Sata Plug the hard drive is on? Right now I have it on the 1st one but I would like to move it to the second one because I want a dual boot system. And yes I know I can use the same hard drive but I would like to keep them separated and use a switch to pick which OS system to use.
While running on the Live Cd, Ubuntu seems to know about my video card and ask to install some drivers but then it asked to be rebooted and it came back up not recognizing anything; video card and hard drive that is. On the live cd I ran the following commands: lswh, lspci, mount, and df. I am not too sure if they will show if the hard drive and the video card are working since I did them on the Live CD. Also on the lspci command, I did this after Ubuntu loaded the driver for the card.
[Code]...
View 9 Replies
View Related
Dec 10, 2010
I have installed ati drivers looking at this HOWTO ATI Installer HOWTO for openSUSE users
But after reboot i see only black screen....
My vga is ati hd4770. Looking for a full tutorial how install drivers (maybe with screens). Please help me.
With ubuntu/linux mint everything was working perfectly.
View 9 Replies
View Related
May 30, 2011
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Oct 15, 2010
I just installed a minimal version of Ubuntu 10.10 (with Openbox) over 10.04. Mainly everything's ok, but I have three problems:
1. When shutting down or rebooting, my speakers make a loud pop. Upon googling around, I found this topic on the Arch forums. Running
Code:
Before rebooting/shutting down works. I, however, would like to have this permanently fixed so I don't have to run these commands every time before rebooting/shutting down.
2. I can't install the ATi video card drivers. I downloaded the correct driver (10.9) from the ATi website and made sure I had the packages found here installed. I also made it executable by running
Code:
When I run the installer, using
Code:
I get this output:
Code:
3. When booting, I get a message saying something like "intel_ips can't find i915 symbols, so graphics turbo is disabled". When googling for this, I see this is a kernel related issue. Since I don't have any understandings of kernels, I thought this is a little too high up for me. What does it mean and how can I fix it, as it slows my boot down quite a bit?
View 5 Replies
View Related
Jan 3, 2011
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
View 4 Replies
View Related
Jul 15, 2010
Here goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
View 8 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Feb 3, 2010
I have ubuntu 9.10 I have the ATI Technologies Inc Mobility Radeon HD 3600 Series [1002:9598]video card. I dont know what it is but i want to enable extra visual effects. unfortunally a message stating "searching for drivers" appears, eventuall folowed by " Visual Effects can not be enabled" i think this is due to the drivers obviosly.
what are the drivers I need for linux (if any) for my specific video card? what do I need to do? also which video card are best fit for ubuntu/ linux? note: I dont know what it is, but originally when I first installed ubuntu I did something and the visual effects had worked had worked and up until recently i may or may not have of messed with any thing could i have of touched something
View 1 Replies
View Related
Jul 20, 2009
I am trying to install the reiserfs drivers to read/write to my external drive. But keep getting command not found. Although the system can get man pages for modprobe.
modprobe reiserfs
bash: modprobe: command not found
I also need to know how to add myself to the sudoers file. I have already tried visudo but this has not worked.
View 1 Replies
View Related
Oct 21, 2010
I recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
View 3 Replies
View Related
Jun 12, 2011
What I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
View 9 Replies
View Related
Apr 8, 2010
is there a way to install Ubuntu -from- an external hard drive. For example, let's say, you have a complete Ubuntu system with everything (no need to download additional packages/softwrae/etc anymore) , but you can't use remastersys to create an ISO with it because it is way over 10GB in size. Much larger than any DVD you could burn that newly created ISO to.. (besides remastersys is limited to the size of a DVD-r anyways)
Maybe someone has tried this before? Someone has created a dedicated large hard drive that is essentially the same thing as a ubuntu installation usb flash drive, to boot from an then install Ubuntu onto another "new" hard drive? I think it would be nice to have a hard drive (external usb or even better, an internal hdd drive i could hot swap to each new computer I have that I wish to install it onto.. ) And I think it would be so much faster to install from a Sata internal HDD drive than a USB pendrive or a cd/dvd rom, right?
View 2 Replies
View Related
Feb 14, 2011
I have downloaded UBUNTU 10.04 and saved to external hard drive since I have no CD drive in my note book. I want to install it from external hard drive what is the command and how can I install it.
View 1 Replies
View Related
Oct 28, 2010
I have a 40 gig external drive that I want to use for Linux. I want the complete install of Ubuntu 10.10 on it so that I can boot straight from there. I tried for hours to accomplish this. The instructions I saw for the issue were for an older version of Ubuntu, and the menus have changed since then. The furthest I got with the project is creating a bootable disk on my drive; it will boot from the drive, but not the full installation. It brings up the menu just like it was a live CD and gives you the options to either "Try Ubuntu" or "Install Ubuntu." I have installed it straight to the drive, but it will not boot from it. My computer does give me the bios option to select boot priority with USB external drives.
View 9 Replies
View Related
May 5, 2010
I installed Lubuntu 10.04 yesterday (yay, my first serious installation!), and I was trying to install the drivers for my video card (GeForce 6200), when it told me that it couldn't use ld. After oing some research I found out that it was in binutils. So I went over and got it and tried to ./configure it when it told me that there weren't any C compilers in $PATH, so I went over to the gcc homepage with a fine-toothed comb and found gcc 4.5.0. When I tried to./configure it, it also told me that there aren't any C compilers in $PATH.
View 4 Replies
View Related
Apr 4, 2010
I have an old machine running Ubuntu 9.10 and XP.t is a P4 and Nvidia FX5200 card.Yesterday all of a sudden the screen started flashing black, the same type as when you install new graphics drivers and the resolution is changing. Only here it keeps happening over and over, the mouse isn't usable fully, the icons and menus are distorted, and I basically can't do anything.
I ended up reinstalling 9.10 and everything was working fine until I installed EnvyNG to get my nVidia drivers. It required a restart, and once I logged in the same thing started happening. So I said screw this, and installed 8.04. Yet even in 8.04, once I used EnvyNG to install the drivers, the same thing happened.A few other detailsP works fine, although one time a similar thing happened on XP (not as bad), and was fixed with a reboot.- This PC runs through a KVM switch, but I connected it directly and the same thing happens.I've found no help via Google. Sounds like a possible hardware problem, but it seems to work fine in XP and only acts up in Ubuntu once I install drivers.
View 7 Replies
View Related
