Hardware :: Drivers For Old NVidia TNT2 Video Card
Dec 21, 2010
I just installed a nvidia TNT2 m64 video card on my AMD 2500+ Ubuntu Linux 10.04 on Gnome 2.30.2. (yeah, it's old). I'm trying to install the proper driver, but system>admin>Hardware drivers says there are no proprietary drivers enabled. nVidia synaptic packages installed (settings; common; modaliases 96, 173, current; xorg video). I used to have the same, or nearly the same card working great before some a**hole stole it. How to configure?
View 1 Replies
ADVERTISEMENT
Nov 30, 2010
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
View 3 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Jan 5, 2009
Quote:
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
View 3 Replies
View Related
Nov 6, 2010
How is OpenGL support (specifically OpenGL 3.x) in the different video card drivers available for Linux?Assuming that the hardware supported it well, would the drivers be an issue?
View 1 Replies
View Related
May 17, 2010
I've tried to enable the drivers for a Nvidia 8400GS video card on Ubuntu 10.04. I've tried change desktop background > visual effects. It tells me Desktop effects can't be enabled. Sudo jockey-gtk looks and tells me no proprietary drivers are in use by my system. I've tried installing from Nvidia's site and that seems to go okay but doesn't seem to work. I have an internal video card that can't be turned off in BIOS )either ON or AUTO) that might be causing me problems.Lspci:Quote:
ron@desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
[code]....
View 1 Replies
View Related
Apr 11, 2011
I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.
View 9 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Nov 18, 2009
After a fresh install of F12 on pc with Riva TNT2 Model 64 graphics card, Login hangs once booted.
Worked fine on f11.
View 13 Replies
View Related
May 1, 2011
I just installed 11.04 and I knew I would have to install the NVidia video drivers. So it was no surprise when it popped up a warning and dropped me into Gnome Classic view. So I turned on the NVidia drivers and rebooted. In my desktop selection menu on the login screen I have "Ubuntu" and "Ubuntu Classic".
Unfortunately they look exactly alike, with the Gnome panel along the top, and the panel with the taskbar, desktops and recylce bin on the bottom. I've gone back-and-forth a few times and nothing has changed. Some changes in one environment is not set in the other, like they really are 2 different environments.
According to the Software Center, Unity (not Unity 2D) *is* installed.So how can I boot into the Unity desktop?
View 9 Replies
View Related
Nov 22, 2010
Got a Gforce4 Ti 4400 graphics card. After installing 10.10 everything works but not optimal:
I cannot choose any visual effects under appearances. I don't have a NVIDIA menu. Can't use any of the features. When looking in the 'additional drivers' section, nothing shows up. Looking at some threads, I tried what is described in: p {margin-bottom: 0.08in;} [URL]
However, the result is crap. As described further down that thread, my screen goes to crap. So, re-installed everything again and I am now wondering if I should just give up. Not my nature though so here is my question:
My card is supported with the Legacy NVIDIA driver: 96.43.xx driver
Latest version on their website:
Version: 96.43.19 Certified
Release Date: 2010.11.16
Operating System: Linux
Language: English (U.S.)
File Size: 15.7 MB
This file is a .bin file. So what should I do. I read something like if you don't use something from the repository you have to re-install it every time Ubuntu's kernel is updated. However, does the driver in the repository support my legacy card. Is it wise to install the certified driver and how do I do that?
View 6 Replies
View Related
Jun 8, 2011
I'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code:
Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux
Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions.
Code:
kernel-headers-2.6.18-238.12.1.el5.i386
kernel-devel-2.6.18-238.12.1.el5.i686
Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
View 3 Replies
View Related
Nov 3, 2010
I have background in ArchLinux though, and have successfully installed, configured and used it on one workstation and two laptops. owever, i just got a new PC and spent several days trying to get Arch to run on it. Finally, i decided that i don't want to spend my time on this anymore and thought that maybe it's a sign i should try other distros (even though theoretically Linux is Linux is Linux), and Debian has always been appealing to me.
So my question is, has anybody had any experience (or issues) running Debian on the hardware mentioned above? I'm actually contemplating Ubuntu already, because there's a chance it will spare me some time and configure everything by itself, but the pride of a person who used to configure Linux from scratch doesn't let me switch to Ubuntu yet
View 4 Replies
View Related
Jul 8, 2010
A few years back I gave linux a try. It was fun but eventually I dropped it because simple tasks like installing software were always a practice in goose hunting and copy/paste command marathons. I am trying again to get fedora up and going. Thinking many of the old methods would be cleaned up by now. I was trying to install nvidia drivers for my 8800 card.
I download the *.run file and it tells me I need to disable "X...etc" so I init 3 to the command prompt and run the *.run file there. Then the installer says.... "hey buddy.. you need gcc to make this work". ok.. I type init 5 to get back to the internet browser. So I search about google for a few moments and then find the yum command for getting gcc installed. Run the gcc and again... init 3 to get back to the command prompt and run the *.rn file for the nvidia drivers. This time the installer says... "hey man... you need the kernel source tree".
[Code]...
View 13 Replies
View Related
Jun 19, 2011
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies
View Related
Mar 5, 2010
I have bought asus notebook with nvidia geforce GT 320m, and installed ubuntu 9.10 notebook remix, and i can't found any drivers for video card, iam new in linux.
View 9 Replies
View Related
Dec 26, 2010
I updated my video card drivers, but when I boot back up, I have no GUI and am given a terminal because it does not recognize the drivers. I have already changed "quiet splash" to "nomodeset" .
Specs:ATI Mobility Radeon 5650
500GB (7200RPM) Hard Drive (SATA)
Intel Core i5-450M processor 2.40GHz with Turbo Boost Technology up to 2.66 GHz
4gb of ram
Ubuntu 10.10
View 9 Replies
View Related
Apr 8, 2009
Which of these cards is better for linux nvida gforce 2 ultra bladerunner or ati rage128 pro 32mb
View 7 Replies
View Related
Apr 6, 2010
I recently installed ubuntu 9.10 dual boot. All went well until I upgraded the video drivers for the nvidia chipset on my motherboard. If I leave Gnome to start with the single user i created i get a black screen and 'mode not supported ' message on the monitor. BUT if i drop to root and 'startx' all is well and i can adjust the various screen resolutions and they all work well.
At this point i created another user name to check, and that works fine also, but if i drop back to the original user i get no screen unless i select 800x600, although all the other resolutions work fine with root and the other user name. Im stumped as I presume there's only one xorg.conf file for all users.
View 1 Replies
View Related
Jun 8, 2011
First off, I'll come clean and admit that I am still relatively green to Linux, but I'm not afraid to tackle the complex. I have a few stroke-inducing issues that I haven't been able to resolve as a usually do by eye-grepping Google and the various forums. Of course, I'm running Ubuntu 11.04 with Unity - which is fairly new and undiscovered country.
I've got this no-name brand, sample laptop from a manufacturing partner of ours out of Shenzhen China. It's rocking a Core i3 M350 with an nVidia GT 330M (discreet-ish?)& apparently some flavor of Intel integrated graphics.
Now, there are so many variables at play, I'm not quite sure where to begin - so please bear with this post a bit longer as I unravel the details. Loading the nVidia drivers (both proprietary and the experimental open varieties) results in Unity no longer working and dumping me back to the classic Ubuntu desktop. I believe it has something to do with the fact that I have no ability to disable the integrated graphics through the BIOS and Ubuntu has set its hopes and dreams upon using Intel graphics for the rest of all time.
That said, running without the nVidia graphics drivers, I am able to use Unity and it runs pretty well.The only caveat being that on occasion (read: intermittently), when the laptop wakes up from suspend/hibernate mode, playing Flash video in full screen gets choppy (stutters). Restarting Ubuntu resolves the issue. I suppose I should verify that I am using Firefox 4.
In addition, there are times that the WiFi adapter will not wake, and using the keyboard function key to power cycle it ceases to function. A complete shutdown is required to address this one. i.e. Restarting and warm-booting does not fix it.
Did I mention Skype is a terd? I don't actually expect a fix for this pile of hot mess - just thought it might make someone laugh. If there is anyone here that could lend me a hand with any or all of these issues, not only will you have the satisfaction of knowing that you are one bad Mambajamba (TM), but I'll buy you a drink or something via Dwolla or bitcoin.
View 2 Replies
View Related
Nov 3, 2009
I have just installed Kubuntu 9.10 in my laptop and it did not ditected my Nvidia 8400 M GS graphics Card I downloaded a driver file
NVIDIA-Linux.x86-19042-pkg1.run to install drivers but when i run it it shows the error error:you appear to be running X server, please exit X before installing.
View 5 Replies
View Related
Jun 24, 2010
I was messing around with Ubuntu trying to make somethings work. Then i rebooted ,and I wasn't able to turn on Visual Effects. So I'm guessing that I must have replaced my video card driver with a non-compatible one or just removed it without knowing. So I was wondering "How Can I Switch Back To The Video Card Driver Ubuntu Came With?" Without reinstalling Ubuntu? Since I was able to at least switch on Visual Effects with it.
And could you also take a look at: [URL]...
View 8 Replies
View Related
Feb 8, 2011
i noticed my desktop has the option in its bios to use this since i mainly use it as a server i wanted to be able to power it on remoly once i found out it was possible
lets say for sake of example the mac address on it is 00:11:22:33:44:55 on the dekstop
also wondering if it is possible to power down the nvidia video card i would like to have it complexly ignore the card's existent and cut power to the slot i would like to basically pick server/desktop mode from grub 2 default being server
View 6 Replies
View Related
Jan 5, 2010
I'm trying to install Ubuntu (or Xubuntu) on a PC that has integrated on board video. After that I want to disable the onboard video and use an NVIDIA GeForce 8400GS video card.
I tried it before, and got a lot of resolution problems.
This is what I did:
- First, I put the card in the PCI slot and modified the bios to use it as the default video, and booted from the ubuntu CD. The installation did not go through as I got no screen output (I guess ubuntu did not recognize my video card).
- Second, I restarted and modified the BIOS so that the onboard video was the default. This worked when I booted from the CD and installed, I got screen output and all. I completed the installation and turned off the computer.
- Third, I installed the card on the PCI slot but did not change the BIOS, booted and used the onboard video, downloaded the NVIDIA driver (190.53) from the NVIDIA website, installed it, and turned off the PC.
- Fourth, I modified the BIOS so that the NVIDIA video was the default, plugged the monitor to the NVIDIA VGA output, restarted, and got ubuntu working at a very low resolution of 640*320.
This is where I am stuck. I can't change the resolution to 1024*768 or 1366*768. I only get 640*320.
Is there any way to avoid all this and do a fresh installation of ubuntu 9.10 with the NVIDIA card already in and as default on the BIOS?
I am thinking the resolution problems started because I got video drivers mixed up with intel onboard during installation, then NVIDIA. I guess I should have removed the intel drivers first before installing NVIDIA drivers. If anyone agrees, how do I uninstall Intel video drivers?
If that is not the case, how do I configure the NVIDIA drivers to work properly?
My PC is an older IBM 8303 KKU at 2.26GHz, with 2GB RAM, 40GB HDD, and a 512MB NVIDIA GeForce 8400 GS
View 7 Replies
View Related
Jul 23, 2010
I have a Lenovo W700 laptop, and have had SuSE 11.1 on it for over a year. Recently, I tried updating to 11.2 and then 11.3. Ever since I tried that, my laptop started shutting down because the graphics card (nVidia Quadro FX 2700m) overheats - when the temperature reaches over 120 degrees centigrade, the system auto-shuts down.
I tried doing a clean re-install of SuSE 11.1 but that didn't help.
I thought it might be a hardware problem, but I can boot the laptop in Windows and it runs fine there. The part of the laptop where the GPU is feels warm, but not burning hot, when running in Windows.
I tried installing nvclock to force the fan to stay on (some of the things I've read seem to indicate a problem with the fan control) but that says it doesn't recognize my card, and when I run it with "-f" it says the card doesn't have fan control.
At this point, I can either run Windows Vista on the laptop, or run Linux in text-mode only; I wasn't able to install a graphical system because it would overheat halfway through the installation.
View 10 Replies
View Related
Oct 14, 2010
After seven months of digging I've come to the conclusion that the problem is somewhere between kernel and X server. I've tried contacting several firends with guru-like experience, I tried looking for answers on FedoraForum, I asked a question there, and I even started a bug report where the blame keeps being passed around different components.
I thought the problem might be isolated to my system, as I wasn't able to find any concrete info on this. About a week ago, I finished a new build for a friend. The PC has an NVIDIA card (GTX460). I tried Fedora 13 on that computer and I noticed the problem there as well. Actually, it was more pronounced than on my system. You couldn't use the system (friend's build) for more than two hours.
I'd like to get a little feedback on just how spread this problem is. I'm trying to see if it's a problem with NVIDIA cards in general, with Fedora in particular, if it's confined to 64-bit systems, etc.
Whether or not you have this issue, please post about it. Please also post to indicate that you have no problem if that is the case. I'll start the first "report". Please state all the items in your report.
Video Card: Dual GeForce9800GT
Driver: nvidia (latest akmod-nvidia from rpmfusion) but problem also present with nouveau
Kernel: Noticed problem from 2.6.32 (earliest tested) to 2.6.34 (latest tested). I did not test with earlier kernels
Problem: System randomly freezes. In most cases, keyboard and mouse stop responding (CapsLock does not toggle the light on the keyboard). system stops responding to ssh and ping. A hard reboot is required On rare occasions, the ssh login is possible and restarting the X server usually revives the system.
View 13 Replies
View Related
Mar 22, 2015
Where should I get the drivers for the video card R7 260X to run on Debian Wheezy? Because it cant be from amd site, considering that I installed from their site, but when running apt-get check is said to me that there was the missing dependence fglrx-core..I also couldn't remove it, because it had other unmet dependencies... After long time attempting to solve on my own I just got enough pissed that I formatted the machine.Now I am asking here to find out what is the best practices when installing those drivers, because clearly I wasn't doing it right...
View 5 Replies
View Related
Feb 11, 2010
So after I installed the ATI Radeon 3400 series video card in my machine, the Xserver cant start! after it loads, it takes me to the init 3. When I tried startx, the screens either go blank or doesnt let me.
I tried to install everything following this website: [url]
I wanted dual monitors but now I cant even get one. The xwindows doesnt appear.
Things I tried:
1. Deleted the xorg.conf and reconfigured (didnt work).
2. sax2 -r -m 0=versa (didnt work)
3. reconfigured the ATI radeon driver from init 3 (didnt work)
4. copy and paste the oold version of xorg.conf (didnt work)
5. tried to run set apt or dpkg-reconfigure command (commands not found)
6. tried xconfig and prompt the best I coudl (didnt work).
7. aticonfig commands (As shown in website) (also didnt work)
I have the live CD to run it from there but I dont know what to do once I get to the terminal.
Is there any way I can revert to previous configuration since the ATI driver gives me some problems? Like a restore function in windows?
How or what files I should change for the X-server to run properly (is there any other file than xorg.conf?....)
The monitors I have:
2009W Dell Monitor
1398 Dell Monitor (I wan to get the dual exntended monitor but it seems to gave me only the mirror image, thats why I tried to reconfigure the video card)
VideoCard:
ATI HD Radeon Mobile 3400 Series
Computer:
Dell Optiplex 680 (i believe) with SUSE 11.26 and x86_64 bit
Or if you can send me the xorg.conf file ...
View 3 Replies
View Related
Oct 8, 2010
I wanted to try 3d desktop so i installed 3d support for nvidia graphics using the instructions on this webpage [url]
I Dont have nvidia i have ati so needless to say i have to gui when i boot up
It shows the fedora loading bubble then a blinking cursor.
I can get to a virtual terminal.
So how do i undo what i did I just want to get it back to normal i dont need 3d support.
View 3 Replies
View Related
Jan 1, 2010
I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
View 8 Replies
View Related
