I'm under Kubuntu 10.04 and I upgraded kde from 4.4 to 4.5. via apt-get. After KDM login, I got a black screen with the mouse cursor visible and active.
I tried this :
Code:
sudo apt-get install -f
sudo dpkg --configure -a
sudo reboot
with no effect.
KRunner (ALT+F2) doesn't open.
I just upgraded to 10.04 on my laptop and after install, clean-up and reboot the screen goes absolutely black. The initial bios stuff is still there and the GRUB loader text. Then darkness without There is one way to start up and getting screen (which I'm using now). If hitting ESC in grub loader, selecting recovery-mode, selecting re-configure monitor, selecting start up in graphics-safe mode (this session only) it'll work. Other combinations, such as re-configuration and normal reboot or just graphics safe-mode does not work.The only real error message I have obtained is the following:(EE) intel(0): ch701x not detected, got 29, from DVOI2C_E Slave 234Given as pop-up dialogue when going into recovery-mode.My laptop is a Compaq Pressaro M2000. I can provide more details on graphics, but I'm not so fluent in linux, so I don't know what terminal commands to enter to get the right debugging information
View 6 Replies View Relatedafter 11.04 upgrade my system starts and i hear the gnome start sound but the screen keeps black. I only see the mouse. I tried setpci -s 00:02.0 F4.B=30 - without success.
here my
Xorg.0.log
Yesterday I attempt to use update-manager to do a distribution update. all was going good. i went to the kitchen to get a coffee and returned to a black screen with no cursor. the install couldnot have finished as it was still downloading updates i believe.
on reboot gnome did not respond so my last resort was to use kde for the time being. by running update-manager through kde I successfully updated to ubuntu 10.10. After completion of the update i restarted and gnome still had a non respinsive black screen on login.
Kde is still working fine.
Or at least how can I completely reinstall gnome.
I think many are having this problem...9.10 works on the PC , but NOT 10.4 LTS or 10.10 ...all I get a black screen on boot up, although it "sounds" like its working in the tower..,,, QUESTION!!...is there a simple download ANYWHERE that will fix this as I am only a newbie Linux end user with average PC skills.....also ...Will there continue to be security updates for (9.10) after this April 2011, or must I find a way to upgrade in order to have a secure Distribution ..I have a Compaq Presario SR1901WM with HDA Nvivia.
View 3 Replies View RelatedI upgraded my machine to F15. I was asked to reboot. From that point on, the system will not boot. I get to the blue screen with the 'egg', about 1/3 of the 'egg' turns white, then the screen goes black. No cursor, nothing.
I hit shift to get the Grub menu, tried booting my old kernel. Same result.
I tried burning a F15 live cd and booting that, but I get a desktop background with no mouse, no docks. It doesn't seem to respond to anything I do. I can boot it in the "basic graphics" mode, or whatever you call it, but I would rather not overwrite my entire hard drive with a fresh install.
I have seen references to some kind of recovery mode provided on the live cd that might repair my install without wiping my data, but I can't find it anywhere.
My hardware:
Dual core Atom D525
Intel NM10 chipset
I am getting a black screen on the latest kernel upgrade 2.6.31-20. My computer completely boots up, but goes black after a minute or two. For now, I am booting up with the previous kernel.
View 3 Replies View RelatedYesterday I upgraded the kernel from 2.6.24-26-generic to 2.6.24-27-generic (I'm still using Hardy Heron). After upgrade I uninstalled the previous Nvidia driver installation:
Code:
sh NVIDIA-Linux-x86-96.43.13-pkg1.run --uninstall
and did a install with
[code]....
Yesterday I upgraded from 9.10 to 10.04 via Update Manager. But when the upgrade procedure was finished and I made a reboot, I only come to the Ubuntu logo appears for a second, then the screen turns completely black and nothing happens. I then have to reboot via the power button.
But I can get it working with so far no problem, by booting to the third option in the boot options list. In the list there are several options, something like this code...
Now the question is; what does this mean when there are several alternatives with the same name? What is the difference between alternative 1 and 3, other than 3 is working and 1 is not? Is there any problem running alternative 3 instead of 1, and if so how do I get it to boot from alternative 3 as standard?
If this is not the right way to do it, how can I figure out what the error is on alternative 1?
Recovery mode doesn't work, same problem. Taking the older kernel gives no problem. I have no 3rd party graphics driver installed. 10.04 was a fresh install on this machine. I cannot get a commandline, the screen just shuts down because of a lack of input.
View 5 Replies View RelatedI upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
Got a black screen after upgrade from 10.10 to 11.04. My Computer is an Acer eMachines E527 [URL]
I) Just started Computer normally, using new Kernel and 11.04 then the screen became black as before. Waited until Harddisk (Light) wouldn't work too much and boot seemed to be over.
II) IN BLIND FLIGHT (without seeing anything, since screen is black):
1) opened the Terminal using Ctrl+Alt+F2
2) typed my "Username" (enter)
3) typed my "Password" (enter)
4) typed "sudo setpci -s 00:02.0 F4.B=30" (enter)
5) typed my "Password" (enter)
III) Now it is not really satisfactory to do this over and over again each time restarting my computer. Is there any way to use a batch or use the grub to setpci ? I'd like to install 11.04 with an USB Stick on a similar computer - how do I setpci there?
so I have Ubuntu 9.10 on my Dell inspiron 1150 and I wanted to upgrade to 10.04. I do the upgrade with the update manager and it dose all the installing. It restarts and goes to the purple screen with the white and red dots for about a minute, then it goes to a blank screen and sits there. i let it sit over night and it still didn't do anything! I've tried booting from CD and it dose the same thing! its bugging the heck out of me!
View 1 Replies View RelatedI have just finished updating my older box from 8.10 to 9.04 and installing a bunch of programs. I had shut it down several times between sessions but when I unplugged it and moved it, it fails. It goes fine through the BIOS and GRUB (I think) but then when there is a screen of text it flashes to black several times and then displays a screen that looks like static with "Ubuntu" barely visible in several places.
View 8 Replies View RelatedAfter doing a dist-upgrade today, my one year old install of squeeze will no longer boot. It stops with a black screen and has to be hard reset. Cant even get to tty1. The last line in dmesg is: cfg80211: Calling CRDA to update world regulatory domain
mike@vaio ~ $ lspci | grep Network 06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100.Just wondered if anyone has any ideas before I restore from a backup?
i have an installation of wheezy 7.8 i think. i was facing difficulties in read of matroska video. therefore have decided to installer gstreamer1.0 wich should be resolve my problem. i have added the backports repository in apt sources list. after an apt-get update i launch apt-get install gstreamer1.0 . i have noticed it have starting downloading more file than it needs i concluded that it was a upgrade or something like because the kernel was also updated. after the the packet downloading it has started the installation with some errors related to LOCALE LCC. it has stopped and restarted some services wich is normal. i have closed all others apps and restarted. Here start the hell. after the restart i have passed the kde login screen and after BLACK SCREEN with mouse working.
Alt+F2 don't open the krunner
What i have tried? i have rename the /home/jefcolbi/.cache and back it again, rename /home/jefcolbi/.kde and back it again. next i have tried to check the Xorg config file. i created a new one with X -configure, modified it to feet my system configuration this does not resolve the problem but add another the keyboard is not working in graphical mode.
My system configuration:
Toshiba laptop Satellite Pro L300
Dual core
3gb Ram
graphic card:Mobile Intel(R) GMA 4500MHD
sound card: Intel HD Audio
debian whezzy 7.8 with KDE
Note: everything was working fine before trying to install gstreamer1.O from backports repository
Was running Server 8.04 with graphical desktop - no problems. Wanted to upgrade to 10.04, so ran sudo do-release-upgrade --proposed
Upgrade was successful (although so much stuff scrolled by, it's hard to tell if something errored along the way).
Server rebooted and a dark maroon screen said 10.4 is booting, ntp service started etc. and a scrolling series of dots.
Then got a sky blue patterned login screen, so I logged in. Screen then went black, with a movable mouse pointer.
If I do Alt-Tab a panel pops up saying ** NO WINDOWS **
Using Ctrl-Alt-F1 (iirc) got me a command prompt, so I logged in there and ran: startx
This gives me the message:
Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again
So checked runlevel (who -r) and that was set to 2. Changed /etc/init/rc-sysinit.conf so RUNLEVEL=5
Rebooted, logged in again, still got black screen + mouse, and **NO WINDOWS**. Logged into terminal and runlevel=5.
Also tried running dpkg-reconfigure xserver-xorg but that returns immediately without anything apparently happening(?).
how I can get my KDE graphical environment back up ?
i recently installed 10.04 after hearing from a colleague that it was highly recommended, however after install, all i get is a black screen with various colors pixels at the tope of the screen. I've been trying to find a resolution, but have nevertheless come up empty, i really need to info that is/was on my desktop (passwords & such).
View 9 Replies View RelatedI just upgraded to Lucid Lynx, and like most people, I'm getting the black screen during boot. So, I went into the grub edit screen, and I tried every variation of the nomodeset fix I could find. So far, nothing has worked. I don't know what graphics card I have, but it's always given me problems.
View 4 Replies View Relatedi did the upgrade thru the update manager but when i rebooted my comp, my computer didnt go pass the black screen with the bar blinking. what black screen im talking about
View 6 Replies View RelatedMy ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
View 3 Replies View RelatedYesterday I done an upgrade with apt and since that time whenever I boot up I am presented with only a blank screen and an unresponsive cursor. I cannot switch console using Ctl+Alt+F*. The only thing I can do is Alt+SysRq+(R,E,I,S) which kills gdm3 and gets me back to the console.
* I can get into Xorg fine via the startx command
* As a temporary fix, if I enable automatic login (via /etc/gdm3/daemon.conf) then gdm3 works.
But I can't get the normal authenticated login screen to work.
Output of journalctl for a failed attempt at running gdm3 with verbose debugging enabled:
Code: Select allOct 25 01:24:43 [hostname-removed] systemd[1]: Starting GNOME Display Manager...
Oct 25 01:24:43 [hostname-removed] systemd[1]: Started GNOME Display Manager.
Oct 25 01:24:43 [hostname-removed] gdm3[15863]: Enabling debugging
Oct 25 01:24:43 [hostname-removed] gdm3[15863]: Changing user:group to Debian-gdm:Debian-gdm
Oct 25 01:24:43 [hostname-removed] gdm3[15863]: Successfully connected to D-Bus
[Code] ....
One other thing worth noting, before upgrading yesterday, I changed mirrors and accidentally pasted in "stable" into /etc/apt/sources.list. So basically I did an initial upgrade, realised my mistake, switched back to testing (which I was on before) and done another upgrade, which is when I noticed this problem.
I upgraded Fedora 10 to Fedora 11 via preupgrade. And now system succesfully boot, but Gnome doesn't starts (i think). There is only black screen and I can only write there.
View 14 Replies View RelatedDuring the upgrade process, all the files appeared to install correctly and the computer rebooted as expected. It then showed the openSUSE splash screen but eventually that went dark and there was no display. Rebooting again did not help. Hitting Ctrl+Alt+F1 results in a corrupted display. I'm guessing this is an issue with the video driver? Not sure how to troubleshoot when I can't even get a terminal window open!
HP Pavilion dv6500 laptop with an nVidia GeForce 8400M GS.
I could upgrade openSUSE 11.4 on my desktop but when trying to do the same procedure on my girlfriend's laptop, after the zypper update part (and the reboot asked), now we can get it to boot.
After selecting suse from GRUB it shows some code (too fast to be read) then black screen forever. I erased the VGA option before booting and now it gets stuck in
Code:
[0.490266][<c02037a6>] kernel_thread_helper+0x6/0x10
We don't have any idea of what to do ;__;
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedAlright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies View RelatedI have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
View 4 Replies View Related