General :: Ubuntu 10.04 Upgrade - Restart Step Black Screen
Jul 25, 2010
so I have Ubuntu 9.10 on my Dell inspiron 1150 and I wanted to upgrade to 10.04. I do the upgrade with the update manager and it dose all the installing. It restarts and goes to the purple screen with the white and red dots for about a minute, then it goes to a blank screen and sits there. i let it sit over night and it still didn't do anything! I've tried booting from CD and it dose the same thing! its bugging the heck out of me!
View 1 Replies
ADVERTISEMENT
Jul 20, 2010
I have a problem after "Loading Linux Kernel - 100%".It mean when I chose "Installation" or "Check installation media" after boot screen, I see "Loading Linux Kernel" from 0% to 99% and after that I see only Black screen for long time. Even NUM LOCK key or Ctrl+alt+del has no resultThere is no a problem with 11.2 and 11.1(current OS).Machine: HP xw8400, 2 CPU XEON 3.0Ghz, 4GB RAM, 2x250GB HDD SATA, NVIDIA Quattro FX 1500 256MB.The same problem with VirtualBox (on the same PC).
Last line in "text mode Installation" is :
...
[ 0.040974] Checking 'hit' instruction... OK.
[code]....
View 9 Replies
View Related
Apr 3, 2011
I think many are having this problem...9.10 works on the PC , but NOT 10.4 LTS or 10.10 ...all I get a black screen on boot up, although it "sounds" like its working in the tower..,,, QUESTION!!...is there a simple download ANYWHERE that will fix this as I am only a newbie Linux end user with average PC skills.....also ...Will there continue to be security updates for (9.10) after this April 2011, or must I find a way to upgrade in order to have a secure Distribution ..I have a Compaq Presario SR1901WM with HDA Nvivia.
View 3 Replies
View Related
May 23, 2010
10.04 runs perfectly most of the time, then every once-in-awhile it crashes. The screen goes black and I have to restart. I had a similar problem with 9.10, so I reverted back to 8.04 which never crashed. I did a fresh install of 10.04.
View 9 Replies
View Related
Jun 25, 2010
Have tried to install 10.04 from a cd sent to me by ubuntu. lts on an x-windows medion pc mt7 (med mt 345). Previously comp. was running windows xp pro. After pressing restart at end of install process I get nothing! Black screen, no mouse control , no keyboard control, nothing at all.
Have tried putting cd in again but get nothing, on pressing restart the cd was politely ejected. Have tried rebooting a few times but get no response. Everything is switched on. So now I cannot even get a terminal up, the only thing I am fairly certain about is that the computer is sending a signal to the screen as there is Not a "no signal" message.
View 4 Replies
View Related
Jul 23, 2010
[code]...
this is my AGP card. My problem is while using ubuntu.. i experience sudden black screen and when the black screen appears it appears for forever until i restart the my computer, it happens suddenly and many times and im having this problem in ubuntu only never experienced in windows.. as i kicked of windows and using ubuntu so i am having this problem regularly. I am using Ubuntu 10.04 Lucid. Ram 512. And i am 10 days Old in ubuntu
View 2 Replies
View Related
Jun 23, 2010
Was running Server 8.04 with graphical desktop - no problems. Wanted to upgrade to 10.04, so ran sudo do-release-upgrade --proposed
Upgrade was successful (although so much stuff scrolled by, it's hard to tell if something errored along the way).
Server rebooted and a dark maroon screen said 10.4 is booting, ntp service started etc. and a scrolling series of dots.
Then got a sky blue patterned login screen, so I logged in. Screen then went black, with a movable mouse pointer.
If I do Alt-Tab a panel pops up saying ** NO WINDOWS **
Using Ctrl-Alt-F1 (iirc) got me a command prompt, so I logged in there and ran: startx
This gives me the message:
Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again
So checked runlevel (who -r) and that was set to 2. Changed /etc/init/rc-sysinit.conf so RUNLEVEL=5
Rebooted, logged in again, still got black screen + mouse, and **NO WINDOWS**. Logged into terminal and runlevel=5.
Also tried running dpkg-reconfigure xserver-xorg but that returns immediately without anything apparently happening(?).
how I can get my KDE graphical environment back up ?
View 5 Replies
View Related
Aug 7, 2011
i cant install my graphics drivers. Everytime i do, i get a black screen of nothing on restart. I'm running ubuntu 10.10. here are my graphics cards.
[Code]...
View 1 Replies
View Related
Jan 28, 2010
I upgraded all xserver-xorg packages in my notebook. After restart system Xorg (GDM) don't run. My screen is black. If I will go to console CTRL+ALT+FX, screen is black too. I will go to console only in single-mode and I tried run dpkg-reconfigure xserver-xorg, but without results. I haven't got /etc/X11/xorg.conf in my system. I have got integrated Intel graphics card.
View 4 Replies
View Related
Nov 11, 2010
A few glitches aside, 11.2 has been very good. Today I installed realcrypt. While in yast, I noticed some other items were set to install. I accepted them along with realcrypt. After the install, clicking the -more applications- button (gnome) did not display the menu, just the mouse wait indicator. After a few tries, I decided to restart. Clicking shutdown did not present the normal menu, but instead instantly shutdown. On restart, I noticed 3-ish orphaned inode(?) messages. After boot completes I'm left with a black screen.I'm running 11.2 Gnome raid-1. The raid array appears to be fine. It emails status on boot, and I received those emails (via google) on the my laptop. I can boot to runlevel 1, so the question is, once there where do I look for cause / fix.
View 5 Replies
View Related
Aug 22, 2010
having trouble during the openSUSE 11.3 installation on my new computer. Basically after it is done copying files and once it restarts for the first time during the installation to do the automatic configuration no video appears and the screen is black.The laptop hardware is:
intel QM57 chipset
i7 extreme 920xm
quadro fx 1800m
am tired of windows 7 and it's deficiencies and would like to continue using this great operating system on my new computer.
View 2 Replies
View Related
May 21, 2011
i installed rtorrent using the script in the rtorrent forum it installed webmin and vsftpd.vsftpd shows connection refused tried everything open port 990 in iptable disable selinux but not working someone tell me step by step to reinstall vsftpd on ubuntu 10.0.4 (32bit)
View 1 Replies
View Related
Jun 6, 2011
i would want someone who would like to assist me as i start to use linux because i am naive to this platform. Also want a step to step approach to this platform called linux i mean a self explanatory article or tutorial
View 8 Replies
View Related
Jan 22, 2011
I had a working ubuntu 8.04.x system. I ran the update manager to upgrade to 10.04.1 LTS. Everything seemed to run fine up to the point where it needed a restart. Upon restart, it spews out a stream of log messages, changes the font of the log messages already displayed, and then the screen goes blank and the system does not respond to keyboard or mouse. It appears as if the system is trying to set up the monitor and messes up.
If I ESC into grub after BIOS boot, I have the option of booting two different kernels: 2.6.32-27-generic and 2.6.24-28-generic. The original ubuntu 8.04 kernel was 2.6.24-24-generic(though I did do some updates might that be the 24-28 kernel?).
Booting the 32-27 kernel results in the behavior described above.
Booting the 24-28 kernel produces a stream of log messages that scroll past to fast to read and drops into ash. One of the last messages is: !ALERT /dev/disk/by-uuid/ xxxxxx does not exist -which is true because there is very little in the /dev directory.
View 4 Replies
View Related
Dec 4, 2010
First time trying this. After trying to upgrade Mozilla, I received a warning that my GTK+ library needed to be upgraded from 2.8 to 2.10 or newer.
In trying to upgrade my GTK+ library following these instructions, I got to the ./configure step but then received the warning bash: ./configure: No such file or directory.
I've got an EEE PC, running Linux (i686, I believe). I'm not sure what additional information to provide.
View 5 Replies
View Related
Feb 7, 2010
i am using rhel5. can anybody tell how to configure an apache server step by step
View 1 Replies
View Related
Dec 11, 2010
I'm under Kubuntu 10.04 and I upgraded kde from 4.4 to 4.5. via apt-get. After KDM login, I got a black screen with the mouse cursor visible and active.
I tried this :
Code:
sudo apt-get install -f
sudo dpkg --configure -a
sudo reboot
with no effect.
KRunner (ALT+F2) doesn't open.
View 1 Replies
View Related
May 7, 2010
I just upgraded to 10.04 on my laptop and after install, clean-up and reboot the screen goes absolutely black. The initial bios stuff is still there and the GRUB loader text. Then darkness without There is one way to start up and getting screen (which I'm using now). If hitting ESC in grub loader, selecting recovery-mode, selecting re-configure monitor, selecting start up in graphics-safe mode (this session only) it'll work. Other combinations, such as re-configuration and normal reboot or just graphics safe-mode does not work.The only real error message I have obtained is the following:(EE) intel(0): ch701x not detected, got 29, from DVOI2C_E Slave 234Given as pop-up dialogue when going into recovery-mode.My laptop is a Compaq Pressaro M2000. I can provide more details on graphics, but I'm not so fluent in linux, so I don't know what terminal commands to enter to get the right debugging information
View 6 Replies
View Related
May 5, 2011
after 11.04 upgrade my system starts and i hear the gnome start sound but the screen keeps black. I only see the mouse. I tried setpci -s 00:02.0 F4.B=30 - without success.
here my
Xorg.0.log
View 5 Replies
View Related
Mar 23, 2011
Now I am using fedora14 for a long time. I want to know how to make a Linux desktop. I just want to download a linux kernel source, then compile it, then add softwares step by step, Last I want to get a desktop linux with X11.
View 5 Replies
View Related
Jul 13, 2010
i had problem on installing my nvidia gforce 8600m gt driver on fc12,now i have installed fc13,could any one show me a step by step way to install the driver?i don't want to confront with that black screen one more time,as i understand if we download the driver from the nvidia website there would be a relationship between the kernel version and the driver,if so what is it?how should we understand which driver is for which kernel?my kernel is,2.6.33.3-85.fc13.i686.PAE[with 2 gb ram]which way is better?to get driver via repos and yum or the nvidia website?
View 6 Replies
View Related
Nov 2, 2010
Yesterday I attempt to use update-manager to do a distribution update. all was going good. i went to the kitchen to get a coffee and returned to a black screen with no cursor. the install couldnot have finished as it was still downloading updates i believe.
on reboot gnome did not respond so my last resort was to use kde for the time being. by running update-manager through kde I successfully updated to ubuntu 10.10. After completion of the update i restarted and gnome still had a non respinsive black screen on login.
Kde is still working fine.
Or at least how can I completely reinstall gnome.
View 1 Replies
View Related
Apr 29, 2011
I'm having lots of trouble with 11.04. Note: everything used to work beautifully on 10.10 for me. I first upgraded and ran into all the problem below, then reinstalled clean and still have the same issues.
1. Terminal screen is unreadable after grub menu. The screen is all white and text is garbage looking. My graphics card is an nvidia fx5200.If I edit the boot option for linux and remove the line 'set gfxpayload = $linux_gfx_mode', the terminal looks normal again.
2. Unity or Compiz or both are broken for me.
Regardless of whether I fix the issue in 1 or leave it there, after booting into X11 my desktop looks like it is blinking. I think my unity keeps restarting. If I disable compiz and use meta city the screen is stable but I have no menus making it useless.
NOTE: I didn't explicitly install any nvidia drivers, not sure if it did it install it automatically as part of the isntallation.
I don't care for Unity (even though it looks kinda nice). I just want my X11 working again with HW acceleration. I am happy to go back to a working gnome except I don't know how. After the upgrade, I was able to switch my driver from nvidia to vesa in xorg.conf and get something usable (but horribly slow), I think it was classic and not unity. However a fresh isntall has a stub for xorg.conf with nothing much in it. If all else fails, I will reinstall 10.10 and wait for a more stable 11 release.
Update: I used to tick automatic login which took it straight to unity which meant I ran into 2. and made this version unusable.If I untick this option on installation I can at least switch to classic and use my desktop.
View 9 Replies
View Related
Jun 25, 2011
I upgraded my machine to F15. I was asked to reboot. From that point on, the system will not boot. I get to the blue screen with the 'egg', about 1/3 of the 'egg' turns white, then the screen goes black. No cursor, nothing.
I hit shift to get the Grub menu, tried booting my old kernel. Same result.
I tried burning a F15 live cd and booting that, but I get a desktop background with no mouse, no docks. It doesn't seem to respond to anything I do. I can boot it in the "basic graphics" mode, or whatever you call it, but I would rather not overwrite my entire hard drive with a fresh install.
I have seen references to some kind of recovery mode provided on the live cd that might repair my install without wiping my data, but I can't find it anywhere.
My hardware:
Dual core Atom D525
Intel NM10 chipset
View 1 Replies
View Related
Feb 10, 2010
I am getting a black screen on the latest kernel upgrade 2.6.31-20. My computer completely boots up, but goes black after a minute or two. For now, I am booting up with the previous kernel.
View 3 Replies
View Related
Mar 3, 2010
Yesterday I upgraded the kernel from 2.6.24-26-generic to 2.6.24-27-generic (I'm still using Hardy Heron). After upgrade I uninstalled the previous Nvidia driver installation:
Code:
sh NVIDIA-Linux-x86-96.43.13-pkg1.run --uninstall
and did a install with
[code]....
View 4 Replies
View Related
Apr 30, 2010
Yesterday I upgraded from 9.10 to 10.04 via Update Manager. But when the upgrade procedure was finished and I made a reboot, I only come to the Ubuntu logo appears for a second, then the screen turns completely black and nothing happens. I then have to reboot via the power button.
But I can get it working with so far no problem, by booting to the third option in the boot options list. In the list there are several options, something like this code...
Now the question is; what does this mean when there are several alternatives with the same name? What is the difference between alternative 1 and 3, other than 3 is working and 1 is not? Is there any problem running alternative 3 instead of 1, and if so how do I get it to boot from alternative 3 as standard?
If this is not the right way to do it, how can I figure out what the error is on alternative 1?
View 9 Replies
View Related
Dec 3, 2010
Recovery mode doesn't work, same problem. Taking the older kernel gives no problem. I have no 3rd party graphics driver installed. 10.04 was a fresh install on this machine. I cannot get a commandline, the screen just shuts down because of a lack of input.
View 5 Replies
View Related
Apr 29, 2011
I upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
View 9 Replies
View Related
Apr 30, 2011
Got a black screen after upgrade from 10.10 to 11.04. My Computer is an Acer eMachines E527 [URL]
I) Just started Computer normally, using new Kernel and 11.04 then the screen became black as before. Waited until Harddisk (Light) wouldn't work too much and boot seemed to be over.
II) IN BLIND FLIGHT (without seeing anything, since screen is black):
1) opened the Terminal using Ctrl+Alt+F2
2) typed my "Username" (enter)
3) typed my "Password" (enter)
4) typed "sudo setpci -s 00:02.0 F4.B=30" (enter)
5) typed my "Password" (enter)
III) Now it is not really satisfactory to do this over and over again each time restarting my computer. Is there any way to use a batch or use the grub to setpci ? I'd like to install 11.04 with an USB Stick on a similar computer - how do I setpci there?
View 7 Replies
View Related
