Ubuntu Installation :: Black Screen After Upgrade 10.10 To 11.04 Acer EMachines?
Apr 30, 2011
Got a black screen after upgrade from 10.10 to 11.04. My Computer is an Acer eMachines E527 [URL]
I) Just started Computer normally, using new Kernel and 11.04 then the screen became black as before. Waited until Harddisk (Light) wouldn't work too much and boot seemed to be over.
II) IN BLIND FLIGHT (without seeing anything, since screen is black):
1) opened the Terminal using Ctrl+Alt+F2
2) typed my "Username" (enter)
3) typed my "Password" (enter)
4) typed "sudo setpci -s 00:02.0 F4.B=30" (enter)
5) typed my "Password" (enter)
III) Now it is not really satisfactory to do this over and over again each time restarting my computer. Is there any way to use a batch or use the grub to setpci ? I'd like to install 11.04 with an USB Stick on a similar computer - how do I setpci there?
Is there a problem with Intel video cards and 11.04? I have tried upgrading and using a live CD and live USB with the same results on this notebook. After upgrading or booting off live CD/USB, I see a black screen, not lit. I can here the login prompt and when I press [Enter] and type my password I hear the Ubuntu theme which means everything is up, but still have a black screen. If I try to go to a console, I am still working with a black screen. Yikes ... I know my Live CD is ok, because it boots fine on my Lenovo S10-3 netbook.
Upgraded from Ubuntu 10.10 32 bit, live CD is 11.04 32 bit. Hardware: Acer Aspire 5732Z with Intel Mobile 4 series chipset integrated graphics controller (rev 09) and 3Gb ram.
Just installed 9.10 on a R3600. It booted fine, did apt-get upgrade, rebooted, still fine, activated nvidia drivers rebooted and now I just get a black screen.
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
This fixed a black screen issue and a brightness adjustment issue after installation of ubuntu. Also on 11.04 I couldn't get Unity to work until I edited grub I didn't come up with the fix but it took me forever to find a solution so I figured I would post it. If I have did something wrong just get a mod to delete or move this. I don't use forums often.
Code: sudo gedit /etc/default/grub Edit two lines to read as follows:
I am running the 64 bit ubuntu 9.10 and cannot connect to the Internet. Everything appears to be working (and recognized) yet no connection. My Atheros eth0 (wired) works all the time but my eth2 (wireless Broadcom wireless does not under Ubuntu Linux) everything works well under Windows 7 (dual boot). Using WEP security. Shouldn't eth1 be the next scheme after eth0? Would eth1 be controlled by my wireless switch whereas eth2 not?
Do a 64 bits version will work better if the cpu is 64 bits capable ? Can I remove all added stuffs on Archbang or CTKArchLive to return to plain Archlinux with openbox that I can configure myself easily, so I can install Archlinux faster ?
I tried and installed Arch properly but I need to install the broadcom bcm 4727 driver (b43,wl,sta,open source), which driver do I need and how can I install it by my usb on Archlinux CLI made with base, sudo and wireless_tools only ?
I just upgraded to 10.04 on my laptop and after install, clean-up and reboot the screen goes absolutely black. The initial bios stuff is still there and the GRUB loader text. Then darkness without There is one way to start up and getting screen (which I'm using now). If hitting ESC in grub loader, selecting recovery-mode, selecting re-configure monitor, selecting start up in graphics-safe mode (this session only) it'll work. Other combinations, such as re-configuration and normal reboot or just graphics safe-mode does not work.The only real error message I have obtained is the following:(EE) intel(0): ch701x not detected, got 29, from DVOI2C_E Slave 234Given as pop-up dialogue when going into recovery-mode.My laptop is a Compaq Pressaro M2000. I can provide more details on graphics, but I'm not so fluent in linux, so I don't know what terminal commands to enter to get the right debugging information
after 11.04 upgrade my system starts and i hear the gnome start sound but the screen keeps black. I only see the mouse. I tried setpci -s 00:02.0 F4.B=30 - without success.
I'm having problems with the screen going black on startup in 10.10. It appears to go completely off (no backlight or anything). If I press ctri+alt+f1 I get a terminal, then I can ctrl+alt+f7 and the desktop appears. I have tried setting the mode to the correct resolution in xorg.conf and I tried using the vesa driver, but it still doesn't work. My graphics card shows as sis 661/741/760
I upgraded my machine to F15. I was asked to reboot. From that point on, the system will not boot. I get to the blue screen with the 'egg', about 1/3 of the 'egg' turns white, then the screen goes black. No cursor, nothing.
I hit shift to get the Grub menu, tried booting my old kernel. Same result.
I tried burning a F15 live cd and booting that, but I get a desktop background with no mouse, no docks. It doesn't seem to respond to anything I do. I can boot it in the "basic graphics" mode, or whatever you call it, but I would rather not overwrite my entire hard drive with a fresh install.
I have seen references to some kind of recovery mode provided on the live cd that might repair my install without wiping my data, but I can't find it anywhere.
My hardware: Dual core Atom D525 Intel NM10 chipset
I am getting a black screen on the latest kernel upgrade 2.6.31-20. My computer completely boots up, but goes black after a minute or two. For now, I am booting up with the previous kernel.
Yesterday I upgraded the kernel from 2.6.24-26-generic to 2.6.24-27-generic (I'm still using Hardy Heron). After upgrade I uninstalled the previous Nvidia driver installation:
Code: sh NVIDIA-Linux-x86-96.43.13-pkg1.run --uninstall and did a install with
Yesterday I upgraded from 9.10 to 10.04 via Update Manager. But when the upgrade procedure was finished and I made a reboot, I only come to the Ubuntu logo appears for a second, then the screen turns completely black and nothing happens. I then have to reboot via the power button.
But I can get it working with so far no problem, by booting to the third option in the boot options list. In the list there are several options, something like this code...
Now the question is; what does this mean when there are several alternatives with the same name? What is the difference between alternative 1 and 3, other than 3 is working and 1 is not? Is there any problem running alternative 3 instead of 1, and if so how do I get it to boot from alternative 3 as standard?
If this is not the right way to do it, how can I figure out what the error is on alternative 1?
Recovery mode doesn't work, same problem. Taking the older kernel gives no problem. I have no 3rd party graphics driver installed. 10.04 was a fresh install on this machine. I cannot get a commandline, the screen just shuts down because of a lack of input.
i recently installed 10.04 after hearing from a colleague that it was highly recommended, however after install, all i get is a black screen with various colors pixels at the tope of the screen. I've been trying to find a resolution, but have nevertheless come up empty, i really need to info that is/was on my desktop (passwords & such).
I just upgraded to Lucid Lynx, and like most people, I'm getting the black screen during boot. So, I went into the grub edit screen, and I tried every variation of the nomodeset fix I could find. So far, nothing has worked. I don't know what graphics card I have, but it's always given me problems.
My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
I'm a linux newbie so go easy on me with technical terms.I've got a Acer Aspire One ZG5. Everything was working fine until one day when I went to switch it on and it shows up everything its suppose to, the blue logo etc but then it loads upto a black screen with the mouse poitner. I can move the mouse pointer around and such and the lights flash but stop suddenly.I can't use the bios recovery disk as I haven't got a USB big enough.
I'm under Kubuntu 10.04 and I upgraded kde from 4.4 to 4.5. via apt-get. After KDM login, I got a black screen with the mouse cursor visible and active.
I tried this :
Code: sudo apt-get install -f sudo dpkg --configure -a sudo reboot with no effect.
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
Yesterday I attempt to use update-manager to do a distribution update. all was going good. i went to the kitchen to get a coffee and returned to a black screen with no cursor. the install couldnot have finished as it was still downloading updates i believe.
on reboot gnome did not respond so my last resort was to use kde for the time being. by running update-manager through kde I successfully updated to ubuntu 10.10. After completion of the update i restarted and gnome still had a non respinsive black screen on login.
I think many are having this problem...9.10 works on the PC , but NOT 10.4 LTS or 10.10 ...all I get a black screen on boot up, although it "sounds" like its working in the tower..,,, QUESTION!!...is there a simple download ANYWHERE that will fix this as I am only a newbie Linux end user with average PC skills.....also ...Will there continue to be security updates for (9.10) after this April 2011, or must I find a way to upgrade in order to have a secure Distribution ..I have a Compaq Presario SR1901WM with HDA Nvivia.
so I have Ubuntu 9.10 on my Dell inspiron 1150 and I wanted to upgrade to 10.04. I do the upgrade with the update manager and it dose all the installing. It restarts and goes to the purple screen with the white and red dots for about a minute, then it goes to a blank screen and sits there. i let it sit over night and it still didn't do anything! I've tried booting from CD and it dose the same thing! its bugging the heck out of me!
I have just finished updating my older box from 8.10 to 9.04 and installing a bunch of programs. I had shut it down several times between sessions but when I unplugged it and moved it, it fails. It goes fine through the BIOS and GRUB (I think) but then when there is a screen of text it flashes to black several times and then displays a screen that looks like static with "Ubuntu" barely visible in several places.
After doing a dist-upgrade today, my one year old install of squeeze will no longer boot. It stops with a black screen and has to be hard reset. Cant even get to tty1. The last line in dmesg is: cfg80211: Calling CRDA to update world regulatory domain
mike@vaio ~ $ lspci | grep Network 06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100.Just wondered if anyone has any ideas before I restore from a backup?
i have an installation of wheezy 7.8 i think. i was facing difficulties in read of matroska video. therefore have decided to installer gstreamer1.0 wich should be resolve my problem. i have added the backports repository in apt sources list. after an apt-get update i launch apt-get install gstreamer1.0 . i have noticed it have starting downloading more file than it needs i concluded that it was a upgrade or something like because the kernel was also updated. after the the packet downloading it has started the installation with some errors related to LOCALE LCC. it has stopped and restarted some services wich is normal. i have closed all others apps and restarted. Here start the hell. after the restart i have passed the kde login screen and after BLACK SCREEN with mouse working.
Alt+F2 don't open the krunner
What i have tried? i have rename the /home/jefcolbi/.cache and back it again, rename /home/jefcolbi/.kde and back it again. next i have tried to check the Xorg config file. i created a new one with X -configure, modified it to feet my system configuration this does not resolve the problem but add another the keyboard is not working in graphical mode.
My system configuration:
Toshiba laptop Satellite Pro L300 Dual core 3gb Ram graphic card:Mobile Intel(R) GMA 4500MHD sound card: Intel HD Audio debian whezzy 7.8 with KDE
Note: everything was working fine before trying to install gstreamer1.O from backports repository
i did the upgrade thru the update manager but when i rebooted my comp, my computer didnt go pass the black screen with the bar blinking. what black screen im talking about
