Fedora Installation :: F15 Upgrade Black Screen

Jun 25, 2011

I upgraded my machine to F15. I was asked to reboot. From that point on, the system will not boot. I get to the blue screen with the 'egg', about 1/3 of the 'egg' turns white, then the screen goes black. No cursor, nothing.

I hit shift to get the Grub menu, tried booting my old kernel. Same result.

I tried burning a F15 live cd and booting that, but I get a desktop background with no mouse, no docks. It doesn't seem to respond to anything I do. I can boot it in the "basic graphics" mode, or whatever you call it, but I would rather not overwrite my entire hard drive with a fresh install.

I have seen references to some kind of recovery mode provided on the live cd that might repair my install without wiping my data, but I can't find it anywhere.

My hardware:
Dual core Atom D525
Intel NM10 chipset

View 1 Replies


ADVERTISEMENT

Ubuntu Installation :: Black Screen After Upgrade To 10.04?

May 7, 2010

I just upgraded to 10.04 on my laptop and after install, clean-up and reboot the screen goes absolutely black. The initial bios stuff is still there and the GRUB loader text. Then darkness without There is one way to start up and getting screen (which I'm using now). If hitting ESC in grub loader, selecting recovery-mode, selecting re-configure monitor, selecting start up in graphics-safe mode (this session only) it'll work. Other combinations, such as re-configuration and normal reboot or just graphics safe-mode does not work.The only real error message I have obtained is the following:(EE) intel(0): ch701x not detected, got 29, from DVOI2C_E Slave 234Given as pop-up dialogue when going into recovery-mode.My laptop is a Compaq Pressaro M2000. I can provide more details on graphics, but I'm not so fluent in linux, so I don't know what terminal commands to enter to get the right debugging information

View 6 Replies View Related

Ubuntu Installation :: Black Screen After 11.04 Upgrade?

May 5, 2011

after 11.04 upgrade my system starts and i hear the gnome start sound but the screen keeps black. I only see the mouse. I tried setpci -s 00:02.0 F4.B=30 - without success.

here my
Xorg.0.log

View 5 Replies View Related

Ubuntu Installation :: Getting A Black Screen On The Latest Kernel Upgrade 2.6.31-20?

Feb 10, 2010

I am getting a black screen on the latest kernel upgrade 2.6.31-20. My computer completely boots up, but goes black after a minute or two. For now, I am booting up with the previous kernel.

View 3 Replies View Related

Ubuntu Installation :: Black Screen After Kernel Upgrade In Hardy?

Mar 3, 2010

Yesterday I upgraded the kernel from 2.6.24-26-generic to 2.6.24-27-generic (I'm still using Hardy Heron). After upgrade I uninstalled the previous Nvidia driver installation:

Code:
sh NVIDIA-Linux-x86-96.43.13-pkg1.run --uninstall
and did a install with

[code]....

View 4 Replies View Related

Ubuntu Installation :: Stuck With Black Screen On Booting After 10.04 Upgrade / Fix It?

Apr 30, 2010

Yesterday I upgraded from 9.10 to 10.04 via Update Manager. But when the upgrade procedure was finished and I made a reboot, I only come to the Ubuntu logo appears for a second, then the screen turns completely black and nothing happens. I then have to reboot via the power button.

But I can get it working with so far no problem, by booting to the third option in the boot options list. In the list there are several options, something like this code...

Now the question is; what does this mean when there are several alternatives with the same name? What is the difference between alternative 1 and 3, other than 3 is working and 1 is not? Is there any problem running alternative 3 instead of 1, and if so how do I get it to boot from alternative 3 as standard?

If this is not the right way to do it, how can I figure out what the error is on alternative 1?

View 9 Replies View Related

Ubuntu Installation :: Upgrade 10.04 To 10.10: Screen Goes Black With Newest Kernel

Dec 3, 2010

Recovery mode doesn't work, same problem. Taking the older kernel gives no problem. I have no 3rd party graphics driver installed. 10.04 was a fresh install on this machine. I cannot get a commandline, the screen just shuts down because of a lack of input.

View 5 Replies View Related

Ubuntu Installation :: After Upgrade System Boots Into A Black Screen

Apr 29, 2011

I upgraded from 10.10 to 11.04 and after the upgrade

- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!

I saw, at the end of the installation process, that the driver for the nVidia video card was removed.

View 9 Replies View Related

Ubuntu Installation :: Black Screen After Upgrade 10.10 To 11.04 Acer EMachines?

Apr 30, 2011

Got a black screen after upgrade from 10.10 to 11.04. My Computer is an Acer eMachines E527 [URL]

I) Just started Computer normally, using new Kernel and 11.04 then the screen became black as before. Waited until Harddisk (Light) wouldn't work too much and boot seemed to be over.

II) IN BLIND FLIGHT (without seeing anything, since screen is black):

1) opened the Terminal using Ctrl+Alt+F2
2) typed my "Username" (enter)
3) typed my "Password" (enter)
4) typed "sudo setpci -s 00:02.0 F4.B=30" (enter)
5) typed my "Password" (enter)

III) Now it is not really satisfactory to do this over and over again each time restarting my computer. Is there any way to use a batch or use the grub to setpci ? I'd like to install 11.04 with an USB Stick on a similar computer - how do I setpci there?

View 7 Replies View Related

Ubuntu Installation :: 10.04 Upgrade - Black Screen With Multi Colored Pixels?

May 24, 2010

i recently installed 10.04 after hearing from a colleague that it was highly recommended, however after install, all i get is a black screen with various colors pixels at the tope of the screen. I've been trying to find a resolution, but have nevertheless come up empty, i really need to info that is/was on my desktop (passwords & such).

View 9 Replies View Related

Ubuntu Installation :: Upgrade To Lucid, Black Screen, Nomodeset Not Working?

Jul 27, 2010

I just upgraded to Lucid Lynx, and like most people, I'm getting the black screen during boot. So, I went into the grub edit screen, and I tried every variation of the nomodeset fix I could find. So far, nothing has worked. I don't know what graphics card I have, but it's always given me problems.

View 4 Replies View Related

Ubuntu Installation :: Upgrade From A Live Disk - After Grub The Screen Is All Black

Oct 21, 2010

My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?

View 3 Replies View Related

Fedora :: F11 After Upgrade Black Screen / Gnome Doesn't Starts

Jun 10, 2009

I upgraded Fedora 10 to Fedora 11 via preupgrade. And now system succesfully boot, but Gnome doesn't starts (i think). There is only black screen and I can only write there.

View 14 Replies View Related

Fedora Hardware :: Black Screen \ Can Force A Shutdown, Login And Get The Same Black Screen?

Mar 6, 2010

I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.

View 14 Replies View Related

Fedora Installation :: Black Screen After New 12 Comes Up?

Sep 15, 2010

After I upgraded F11 to F12 on an x86_64, the new system boots and the daemons come up, then the screen goes black and the computer restarts. But then it won't boot at all. It just keeps restarting.It could be a monitor driver problem. The one time I managed to press "I" fast enough to bring GRUB up, I tried adding "nomodeset". Nothing changed. The monitor is an HP 2009m, so it should not need "nomodeset" anyway. Xfree86.cf has not changed from F11 to F12.

I have a full DVD, so I can bring up Rescue Mode. I had hoped to find clues in (/mnt/sysimage)/var/log/messages, but nothing is being written to it. Once after I rebooted off the hard disk from Rescue Mode, I witnessed a long SElinux conversion. That disquiets me. But disabling SElinux does not solve the problem either.Can anyone suggest some kernel options that might overcome this problem? I shrink from reinstalling F11 from scratch and having to restore all my files from my backup system!P.S. I just found in my personal X11 log a message to the effect that /usr/lib64/dvi/nouveau_dri.so is missing. So it is; the directory has 12 drivers and not this one. If I remember right, "nouveau" often figures in trouble reports.P.P.S. As myself in Rescue Mode I can use xinit to bring X up! But it has only a vanilla text window and no mouse cursor, so I cannot use it or get out of it.

View 8 Replies View Related

Fedora Installation :: Black Screen On EeeBox?

Apr 29, 2009

I am trying to install Fedora10 on a eeeBox, where I understand the graphic card is highly irregular. After the initial loading (the white/blue ASCII-art bar in the bottom) I get a black screen and that's all.If I Ctrl-Alt-F2 to a text screen and, as advised, do "init 3" and then "Xorg -configure" and restart the server with the new config - the same happens. Just a blank screen..

View 1 Replies View Related

Fedora Installation :: X86 64 Black Screen At Install?

Jul 19, 2009

why do i get the black screen at install just after when it loads

View 3 Replies View Related

Fedora Installation :: 12 Boot - Getting Black Screen

Jan 19, 2010

I cant boot fedora, i have installed windows XP and Fedora 12, i can boot XP, but when i try to boot Fedora, it show me boot screen to choose Fedora and Other, when i click enter on Fedora, nothing happens, just black screen :S I tried with "acpi=off", and it doesn't work :/

View 2 Replies View Related

Fedora Installation :: Getting The Black Screen After Update?

Sep 1, 2010

yesterday I updated the system, and that involved kernel 2.6.34.6-47.fc13.x86_64. After rebooting, the progress bar goes fine, but when finished the screen flickers a little and goes black. I can't switch to other terminals via Ctrl + Alt + Fx, so I'm using remote access via ssh. I thought it could be nvidia issue, so I updated kmod modules with rpmfusion-nonfree-updates-testing, and when booting nothing complains, but I'm still getting black screen. Xorg log doesn't seems to complain (no errors (EE)).

View 14 Replies View Related

Fedora Installation :: Black Screen While Booting?

May 27, 2011

downloaded Fedora 15 Live CD and made a booting live CD with it , everything went Okbut after the first screen " automaticlly boot after 10 s " everything just went creepy and the contrast of my screen has become very very low , I was able to see that unity booted but I barely could see the icons without being able to see anything esle , just dark*darkthe same happened with the usb live version .Im having a " Mageia RC " installed in dual-boot with windows 7 and I have the same problem with it . which means, the distro is there but cannot be used cuz the contrast is very very low

View 1 Replies View Related

Fedora Installation :: Black Screen Without Nomodet?

Aug 13, 2011

I found a bug, it's due to light the screen, if I start not choose nomodet the screen is very dark, I use the setpci -s 00:02.0 F4.B=00 the screen back to normal, but when I restarted, which continued to setpci. How to fix this,

My laptop infomation:

Acer 4937
CPU: Intel Core 2 Duo T6600
RAM: 2GB
Graphic: Mobile Intel 4 Seri 796MB

I have installed Fedora 15 from USB. If i start without nomodeset then screen startup is black!

View 4 Replies View Related

Fedora Installation :: Black Screen On Boot After Fresh Installation Of F12

Nov 24, 2009

I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.

View 9 Replies View Related

Fedora Installation :: Black Screen After Automatic Update?

Jun 25, 2009

I should have know, it's named after a windows "feature".On my laptop (Acer Aspire 5310) Fedora 10 offered me an automatic update to Fedora 11. Because I trust any automatic update Fedora brings to me (it's tested right) I automatically pressed yes. It started some downloads and everything seems to run pretty smooth. Then I had to reboot the computer, press that button as well.... and it reboots into Fedora 10 (untill the end of the bar). After that I have no clue what happens, because before X is started I get a black screen with nothing on it, even ESC doesn't do anything :O I don't even get the "_" to indicate the laptop is doing anything.

View 3 Replies View Related

Fedora Installation :: Black Screen After Fresh Install?

Dec 8, 2009

Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _

View 11 Replies View Related

Fedora Installation :: Black Screen After Count Down When Booting From CD

Mar 11, 2010

I am not sure what is wrong I am dual booting with windows 7 I have partitioned correctly when I boot from the CD The first screen comes up where it says automatically boots in 10 seconds. when it finishes counting down it pauses and then goes straight to a black screen I also tried to load Ubuntu and the same thing happened. Not sure what to do?

View 3 Replies View Related

Fedora Installation :: F13 Black Screen During Install From Any Source?

Jun 26, 2010

trying to install F13 onto an older HP a1610n, which uses an nvidia 6150LE chipset. While booting from the install media, the screen goes completely black. The machine isn't hung, as from the DVD activity LED, it's still dutifully doing its thing, just not letting me see any of it. I'm thinking/hoping some kernel parameters might help, but I can't seem to find out what they would be.

View 1 Replies View Related

Fedora :: Black Screen Of Words Instead Of Fedora Live Boot During Installation

Jun 1, 2010

When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..

View 2 Replies View Related

Ubuntu :: Black Screen After KDE 4.5 Upgrade?

Dec 11, 2010

I'm under Kubuntu 10.04 and I upgraded kde from 4.4 to 4.5. via apt-get. After KDM login, I got a black screen with the mouse cursor visible and active.

I tried this :

Code:
sudo apt-get install -f
sudo dpkg --configure -a
sudo reboot
with no effect.

KRunner (ALT+F2) doesn't open.

View 1 Replies View Related

Ubuntu Installation :: Can't Boot 10.04 Disc - Boots To A Purple Screen Then It Goes To A Black Screen With A Load Of Writing Nothing Else Happens After Screen

May 12, 2010

I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?

View 1 Replies View Related

Fedora Installation :: Boot Freezes At Black Screen After Update

Mar 12, 2009

Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.

I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved