Ubuntu :: Belkin Wireless G Router Not Transmitting / Connecting?
Oct 5, 2010
Ubuntu 9.04.
Belkin Wireless G router.
Has been working fine. Today it is not. I have done nothing to it. It just keeps saying "Looking up *********" and "Cannot connect to server".
I hard wired the pc to the modem and it works fine. Hard wired the pc to the router it works fine. Running wireless, both of my computers are not connecting.
If I remember, one of the lights on the router should be lit solid, just as it is on the modem. However, all lights are blinking. The only solid light is "power".
View 2 Replies
ADVERTISEMENT
May 10, 2011
You'll need to reply like I'm an absolute idiot. I cannot get the stupid thing to work. WINE won't install, and I'm really confused on how to make it work. If anyone could please give me a step-by-step, that would be great.
View 1 Replies
View Related
May 13, 2010
Does anyone have an opinion on the BELKIN F5Z0142uk Enhanced Wireless ADSL Router Network Kit, I want to setup a small home LAN and this kit caught my eye, it includes a usb Wi-Fi dongle for connectivity to a desktop computer, one of my pc's doesnt have a network card so this sounds like a good idea. Whats the build quality like and is it reliable. The link: [URL]
View 2 Replies
View Related
Dec 28, 2010
I recently purchased a TPlink 5 port switch, which for some reason didnt work with windows, only my ubuntu computer, I found a cheap wireless belkin router which also has 4 wired ports. It now works well except that it is slow searching for new servers eg, going to facebook creates a long wait and can even time out but once on the website everything works fast, The connection is 2.89 Mbps which is good for this area and ping is 45ms. What could I do to fix this problem. This affect my ubuntu computer and the windows xp pc as well
View 2 Replies
View Related
Apr 1, 2010
My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 Replies
View Related
Apr 13, 2010
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies
View Related
Jun 21, 2010
I have a computer running Ubuntu, and a MacBook Pro. I need to buy a decently cheap wireless router that I can hook up to my Ubuntu so that it will send wifi signals and I can use the wifi to go online with my MacBook Pro. I was about to get one today, but remembered how Ubuntu is picky about working with things like that. I'm only going to be using it to get signals around the house which isn't that big at all.
So what would be the cheapest and decently efficient wireless routers that I can use which Ubuntu will cooperate with?
View 2 Replies
View Related
Feb 4, 2010
I am using fedora 12, for about 2 months and now I am facing for the first time a problem with the wireless router. After a router restart my computer cannot connect with the router even if it is listed along with other access points on the list. I am sure the password is right because I am currently online with my windows partition using the same router.
Output of iwconfig when not trying to connect
Code:
Output of iwconfig when trying to connect
Code:
Output of ifconfig when not trying to connect
Code:
The wireless used to be working fine until the router restart (switch on/off the hardware) has happened
View 2 Replies
View Related
Feb 15, 2010
I made some tests with a router without security and my internet connexion worked without any problem. But if I activated the wep security (or wpa it is the same behaviour) suse 11.1 won't connect in any way.
I used knetwork manager and traditional ifup method, both failed to connect.
I saw, using iwconfig that in both cases (wpa or wep) I was associated with the AP but dhclient won't work in any way, I was always in the APIPA...
I checked if there weren't any access control (mac address filtering, ...) and all the settings in the router were off to give me full access. Including the firewall set to off. The DHCP feature was on in both cases.
I noticed that the firewall must be on in suse 11.1 otherwise I couldn't have any connections even if I disabled wep or wpa...
View 2 Replies
View Related
Oct 30, 2010
Ubuntu 10.10 connects to a DSL modem without any problems - I mean I just plugged it in and it worked - GREAT I bought a wireless router so I could connect my netbook and now my Ubuntu machine which is simply using a cable from the wireless router now DOES NOT connect. I tried a windows machine on the wired connection from the wireless router and it connects without a problem. OF course if I remove the wireless router from the chain, i.e. simply connect directly to the modem it works straight away.
View 6 Replies
View Related
May 5, 2010
When fedora initially starts up, the network manager shows all the available wireless connections available to me. However, when I select my wireless connection, it will go through the loading process where it shows the two green dots and the circular moving blue streak, then it prompts me to put in the wpa password.
This is where the trouble starts...when i input my wpa password, it will proceed to attempt to connect to my network but it never succeeds in doing so--it will keep on asking me to input my wpa password. when i finally get sick of doing it over and over again, i just hit cancel instead of retrying to connect.
After i stop trying to connect, the network manager no longer shows all the available wireless networks--the list is completely empty, and i can find no way to get the list to show up again, with the exception of restarting my computer.
I am able to connect to the internet with a wired ethernet, but id like my wireless to work.
View 3 Replies
View Related
Apr 10, 2011
Using openSuSE 11.4 D-Link DWL-520+ won't connect to my router. The computer recognises the wireless card is there and working but I can't get it to connect to the router. Not sure how to get it to connect.
View 1 Replies
View Related
Jan 3, 2010
For several months I was using EDUP adapter with both my laptop that operated on Ubuntu 9.04 exclusively and a desktop that could also boot with XP. Soon after 9.10 was released I updated my laptop and was able to use the adapter to connect to the Net.Recently, I also updated the desktop but also made it exclusively a Linux machine. Unfortunately, I have been unable to get the wireless adapter to work again on the desktop.The OS recognizes the device as wlan0, and lsusb shows:Bus 003 Device 005: 0cde:0008 Z-Com Sitecom Wireless Network Adapter 100G+ WL -125The network manager recognises the availability of the wireless network and attempts to connect. After trying for a while it comes up with a dialog box "Wireless Network Authentication Required" and in response I enter the WPA password but with no success.The behaviour would indicate that I am entering the wrong password but I am not.I have checked it several times and compared with the password that works with the laptop.
View 3 Replies
View Related
Aug 13, 2010
Need help, ubuntu keeps connecting and disconnecting to my wireless router. whenever i am able to get it to connect for a significant amount of time, i still have no access to the internet.
using ubuntu 10.04
using Linksys router, not sure what model but can find out.
using toshiba satellite laptop
I am able to access my router and internet in Windows without any problem
dont have anything of importance on ubuntu install, so i could reinstall but would rather not so that i could fix this problem in the future.
View 1 Replies
View Related
Dec 15, 2010
I have installed Ubuntu x86 10.04 LTS onto an old Dell machine which is connected to my broadband modem and Netgear Wireless Router (WGR614 v6). The router is encrypted with 64-bit WEP and allows my System76 Pangolin Performance laptop to connect flawlessly out of the box. However, my sister runs Windows XP Professional 32-Bit on a Dell Latitude D830. This machine's wi-fi card is an Intel PROSet Wireless which recognizes the router but can't access it.
What should I do on her laptop in order for her to access the wi-fi router?
View 1 Replies
View Related
Jan 29, 2011
router comtrend CT-536T but now my laptop lenovo r61i is not able to connect to it. like it has a issue with wap/wap1. Is their a possibility to get it to connect. the other router maxG (US robotics) is wep/hex based. any suggestions ? It only made a connection the first time and after the signal wasn't even noticeable .
View 2 Replies
View Related
Jan 12, 2011
Running Suse 11.3 (Gnome) on an Acer Aspire 5310 Laptop.Installed all the default broadcom drivers via install software.The following I tried:
/usr/sbin/iwlist eth0 scanning
eth0 Interface doesn't support scanning.
bodifee@linux-wv6l:~> /usr/sbin/iwconfig
lo no wireless extensions.
[code]....
So card still not active i seems.Have deleted and added wireless adapter
View 2 Replies
View Related
Aug 6, 2010
i'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
View 2 Replies
View Related
Jun 23, 2010
I have a new belkin N1 router which I tested in somebody else's flat. It worked fine. When I got home I reset it by pushing a paperclip in the hole for 10+ seconds to erase this flat's internet connection settings (username and password and stuff). After this I plugged it the computer and tried to connect to it (wired connection) using 192.168.2.1 (this is correct for that router, it is not 192.168.0.1). But the browser says it is offline and cannot connect. The lights of the router cycle, the "modem router" light blinks continuously and the others briefly come on and go off again, every few seconds. I tried resetting it again, several times, leaving it off for a few hours, leaving it on for a few hours, etc.
View 2 Replies
View Related
Jun 20, 2011
I have just installed 11.04 alongside windows vista. I have been trying to connect my router but it keeps saying disconnected from network. I have ran all of the troubleshooting tips in ubuntu its self and everthing seems in order. is there any settings i need to change on my router or in ubuntu's edit connections programe? I managed to connect to the router once to upgrade from 10.10 to the 11.04 but even before upgrading to 11.04 i had problems connecting to the router.
View 6 Replies
View Related
Jun 18, 2011
I joined this forum so I can say my experience with the crappy belkin N150 router. It appears you need to run the setup cd under windows to make the router 'see' the modem. Under linux as someone pointed out you can easily enter the router setup from a browser ( enter 192.168.2.1 ) and connect to the router only (wired or wireless connection) but not the internet. Does anyone have any idea what the windows setup is doing to connect the router to the modem and how to do it under linux in the browser?
View 9 Replies
View Related
Feb 13, 2010
How do I get my ubuntu 9.04 computer to recognise the USB wireless stick and then connect to my wireless d_link router?
View 1 Replies
View Related
Sep 27, 2010
Last night I jumped into the linux world and finally installed Ubuntu in a dual boot system with XP on board as well (eventually I want to get rid of this). How can I get my wireless Belkin F5D8233-4 router working. I put the install disk in and it shows on the desktop but unable to execute - keep getting an error message. Getting frustrated...
View 6 Replies
View Related
Nov 16, 2009
I dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies
View Related
Oct 2, 2010
I have a old laptop Dell C600 PIII 800mhz 256mb RAM 20Gb HDD and a floppy drive. It has 1 USB port and no wifi card.
I bought the Belkin F6D4050 v1 usb wireless adapter so that I could use it on the above laptop and connect to my wireless network at home. The Belkin USB wireless adapter has a Ralink xchipset
There was no specific Linux driver available but a workaround for an old driver worked. Some changes to the code and compiling gets the wireless adapter to work.
I have installed Arch on the laptop. I compiled it and its working fine
Questions 1.Arch linux releases new image only once or twice a year I have downloaded the latest available arch image and built froms scratch. When I update Arch (as it is a rolling release) the kernel also gets updated and the compiled driver fails to work. I have to recompile again for the new kernel. Is there a way I can compile this driver in the existing Arch or any other distro kernel and use as long as I can without updating so I do not have to recompile again
View 1 Replies
View Related
Jun 30, 2011
I have a Belkin wireless router model F5D7234-4 version 5. I switched to DHCP long enough to access the router via Firefox browser and look at all the settings. I turned off all encryption and other security related functions in order to just get it going. The IP of the router is 192.168.2.1 which is the default for this router. It is set to channel 6. I can not ping the router from either of two machines using regular ethernet or wireless. I have very limited experience with routers and am in need of help so I can use this for wireless connection to my living room box to my laptop in the bedroom about 50 feet away.
I tried changing the gateway from the living room box IP number to the router IP number with no success. I don't have anything connected to the internet port on the router. The living room box and the laptop are connected to the ethernet ports on the router. Ethernet works fine. Wireless does not. I compiled and installed the drivers for my wireless card on the laptop, a Realtek 8176 which uses the kernel modules rtl8192ce, rtlwifi and mac80211. ifup wlan0 brings up the wlan interface with these modules loaded. Right now I just want to be able to ping the router using regular ethernet. That would tickle me pink at this point. I downloaded the manual but I just can't seem to make headway.
View 2 Replies
View Related
Jul 8, 2010
I have a newer Belkin N+ router that has a USB port for accessing an external hard drive.I can access the HD with no problem in Windows.I am new to Linux/Ubuntu and cant seem to connect to the HD. In "Network" I have a folder "Windows Share" and within that folder is where I see the HD "CBHD" (name of my drive). I cant click it because when I do, i get an error message along the lines of (cant remember exactly right now) "Failed to mound"I typically access the drive in Windows via : \192.168.2.1
View 1 Replies
View Related
Apr 29, 2011
I plan on installing a belkin wifi router. Is there any software to configure it ? also i need to increase the security as max as possible will my wifi be secure? only certain number of devices to access it also any software to display the number of devices accessing it like a radar? i am very fed up of all the command-line thinggy
View 1 Replies
View Related
Jun 21, 2010
I have an external hard drive connected to my router. From Windows I can access it, but from Ubuntu I can see the hard drive, but when I try to access, I'm asked for a password. However my network does not have a password neither the hard drive.
What must I do?
View 9 Replies
View Related
Aug 1, 2010
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies
View Related
