My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 RepliesI made some tests with a router without security and my internet connexion worked without any problem. But if I activated the wep security (or wpa it is the same behaviour) suse 11.1 won't connect in any way.
I used knetwork manager and traditional ifup method, both failed to connect.
I saw, using iwconfig that in both cases (wpa or wep) I was associated with the AP but dhclient won't work in any way, I was always in the APIPA...
I checked if there weren't any access control (mac address filtering, ...) and all the settings in the router were off to give me full access. Including the firewall set to off. The DHCP feature was on in both cases.
I noticed that the firewall must be on in suse 11.1 otherwise I couldn't have any connections even if I disabled wep or wpa...
on kde4 with knetworkmanager I cannot get past the wep security key on my home router. Every other wlan works, ethernet works, settings are definitely correct because it works with windows, other computers.And on the same computer even with gnome networkmanager! Also it used to work fine earlier. Behavior the same with different users including root, regardless of using kwallet or not. Networkamanager tries to connect and after one or two minutes throws the setting window back at me. I uninstalled and re-installed and deleted all related files I could think of. I even tried a complete fresh installation of opensuse only keeping the /home partition, so the problem must be lying there I guess. But then why all users?
PS opensuse 11.2
kde networkmanager 0.9.svn1043876-1.1.1
I have an open WEP wireless internet connection with a security key. KNetworkManager can never obtain an IP address from my wireless router, but I know that the router works because Windows can connect correctly and Ubuntu's NetworkManager can connection correctly. Does anyone know what is happening? KNetworkManager just asks for my security again and again and again after it fails to connect.
View 8 Replies View Relatedat start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
Using openSuSE 11.4 D-Link DWL-520+ won't connect to my router. The computer recognises the wireless card is there and working but I can't get it to connect to the router. Not sure how to get it to connect.
View 1 Replies View RelatedI clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View RelatedMy wireless connection work just fine but it gives me wrong connection status, like 10% even when I'm seating near the wireless router or disconnect status while I steal manege to use the internet at full speed.
View 1 Replies View RelatedI can connect to my wireless router while logged in as root, but not under my user account. I went into YAST and the user maintenance area and gave myself every permission (Add, Edit, Delete Users or Accounts), but kde network maanger will not allow me to connect to my router.
View 5 Replies View RelatedI'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedMy son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies View RelatedI moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
I am using fedora 12, for about 2 months and now I am facing for the first time a problem with the wireless router. After a router restart my computer cannot connect with the router even if it is listed along with other access points on the list. I am sure the password is right because I am currently online with my windows partition using the same router.
Output of iwconfig when not trying to connect
Code:
Output of iwconfig when trying to connect
Code:
Output of ifconfig when not trying to connect
Code:
The wireless used to be working fine until the router restart (switch on/off the hardware) has happened
I am facing issues in connecting to wifi after upgrading to 11.3 from 11.2. My laptop has Intel 5100 wireless. I had searched through the forum and did find some workarounds(like updating options.conf, removing /etc/NetworkManager directory, using ifup instead of network manager) but all those are not working for me. It will disconnect within a few mins after restaring network service. Has anyone heard about any fix from Intel guys for this and if yes then where can I get that? I had faced hell lot of difficulties while upgrading coz of many unresolved dependencies and don't want to go back to 11.2
View 4 Replies View RelatedI've tried really hard to avoid posting on here, but nothing that I've tried has worked. I just installed openSUSE 11.3 GNOME Desktop. It's my first time using openSUSE, but I do have a little bit of Linux experience. I have the following wireless network card:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) c:00.0 0280: 14e4:4315 (rev 01)
I switched control of network setup to YaST (Traditional Method with ifup). It installed the firmware automatically for me. I set up connection configurations as follows:
- Dynamic Address: DHCP
- Operating Mode: Managed
- Network Name: Hetts (I was able to scan and it found my ESSID)
- Authentication Mode: No Encryption (I was using WPA2 and having trouble so for now I've switched my router to use no encryption just to try and get something working)
After setting this up and clicking OK, it should automatically configure and connect, right? I've tried a bunch of things including rebooting and deleting the wireless card configuration and starting over by reinstalling the firmware. I've also tried setting up the connection using NetworkManager and still have the same problem. I have my laptop setup to dual boot, and when I boot in Windows, wireless works perfectly fine, so there is nothing wrong with my hardware or router. Here are some of the outputs I'm getting:
[Code]...
I tried adding the IP address manually too using "ip addr add ...", but still no connection. I can't even ping the access point at 192.168.1.1. Sorry for such a long post, but it seemed to be common for people to not post enough information, so I put as much as I could think of.
I just converted over from Ubuntu, and so am quite new to this new system architecture. Please give me just a little patience I just installed 11.4 on my EEEPC 901. All works great, except the RT2860 wireless, which will search and attempt to connect, but does not ever manage to connect. All updates were installed through Ethernet, and multiple access points have been tried. I also have tried open connection with no encryption.
View 9 Replies View RelatedWhen fedora initially starts up, the network manager shows all the available wireless connections available to me. However, when I select my wireless connection, it will go through the loading process where it shows the two green dots and the circular moving blue streak, then it prompts me to put in the wpa password.
This is where the trouble starts...when i input my wpa password, it will proceed to attempt to connect to my network but it never succeeds in doing so--it will keep on asking me to input my wpa password. when i finally get sick of doing it over and over again, i just hit cancel instead of retrying to connect.
After i stop trying to connect, the network manager no longer shows all the available wireless networks--the list is completely empty, and i can find no way to get the list to show up again, with the exception of restarting my computer.
I am able to connect to the internet with a wired ethernet, but id like my wireless to work.
I have a computer running Ubuntu, and a MacBook Pro. I need to buy a decently cheap wireless router that I can hook up to my Ubuntu so that it will send wifi signals and I can use the wifi to go online with my MacBook Pro. I was about to get one today, but remembered how Ubuntu is picky about working with things like that. I'm only going to be using it to get signals around the house which isn't that big at all.
So what would be the cheapest and decently efficient wireless routers that I can use which Ubuntu will cooperate with?
I accidentally powered down in the middle of a session by removing the wrong battery from my laptop (a Motion Computing tablet), and ever since that happened knetworkmanager crashes with a segmentation fault on startup. I have uninstalled it and then reinstalled it from an openSuse 11.4 DVD I made a few months ago, but it still crashes on startup. Ifup says it connects to the wifi (Wayport Access @ McDonalds) I have available, but browsers don't reach the internet while Ifup is connected, so I can't sign on and get access to anything more recent. Is there some file I ought to delete,or some other software I ought to delete and reinstall?
View 9 Replies View RelatedUbuntu 9.04.
Belkin Wireless G router.
Has been working fine. Today it is not. I have done nothing to it. It just keeps saying "Looking up *********" and "Cannot connect to server".
I hard wired the pc to the modem and it works fine. Hard wired the pc to the router it works fine. Running wireless, both of my computers are not connecting.
If I remember, one of the lights on the router should be lit solid, just as it is on the modem. However, all lights are blinking. The only solid light is "power".
Ubuntu 10.10 connects to a DSL modem without any problems - I mean I just plugged it in and it worked - GREAT I bought a wireless router so I could connect my netbook and now my Ubuntu machine which is simply using a cable from the wireless router now DOES NOT connect. I tried a windows machine on the wired connection from the wireless router and it connects without a problem. OF course if I remove the wireless router from the chain, i.e. simply connect directly to the modem it works straight away.
View 6 Replies View RelatedRunning Suse 11.3 (Gnome) on an Acer Aspire 5310 Laptop.Installed all the default broadcom drivers via install software.The following I tried:
/usr/sbin/iwlist eth0 scanning
eth0 Interface doesn't support scanning.
bodifee@linux-wv6l:~> /usr/sbin/iwconfig
lo no wireless extensions.
[code]....
So card still not active i seems.Have deleted and added wireless adapter
Since my update to OpenSuse 11.2 knetworkmanager refuses to connect to WEP enabled networks (worked fine with knetworkmanager 11.1). I am sure that I use the correct password and I tried on 3 different networks. The manager is connecting to open networks and WAP protected networks without problems. I saw on other forums that there were similar problems with previous versions of networkmanager. But I could not find a solution for my problem.
View 9 Replies View RelatedI have two usb wlan cards. In 11.2 whenever i start connection with the second one (wlan1) via knetworkmanager, the latter also starts a connection using the first one , leading to wlan problems,
In 11.1 i had no such problems because i could select the one to be used in knetworkmanager, and only that one was used by knetworkmanager.my current solution is to
su
ifdown wlan0
logout
this shuts down the first card but i have to do this manually after every restart. one thing: don't come with "deactivate in bios" - i knoe this but playing around in bios everytime i switch between windows and linux is no option. So how can i prohibit permanently that knetworkmanager uses the first one (wlan0)? putting in some place of suseconfigs a rmmod <driver>? where? /etc/sysconfig ??
Even though I am not new to Suse, I am still very inexperienced, especially when it comes to wireless. I am running Suse Linux 11.3 and I am having problems connecting to my wireless. My network controller is a RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01). I am recieving a signal from my wireless router, however when I try to connect to my ESSID via KnetworkManager It asks for a WEP key. After entering the key, Knetnetwork manager will try to connect for a minute or so and then it will ask for my WEP key again. It keeps repeating this cycle without ceasing. How to configure the WEP so that Knetwork manager will connect or a way around WEP.
View 5 Replies View RelatedFor several months I was using EDUP adapter with both my laptop that operated on Ubuntu 9.04 exclusively and a desktop that could also boot with XP. Soon after 9.10 was released I updated my laptop and was able to use the adapter to connect to the Net.Recently, I also updated the desktop but also made it exclusively a Linux machine. Unfortunately, I have been unable to get the wireless adapter to work again on the desktop.The OS recognizes the device as wlan0, and lsusb shows:Bus 003 Device 005: 0cde:0008 Z-Com Sitecom Wireless Network Adapter 100G+ WL -125The network manager recognises the availability of the wireless network and attempts to connect. After trying for a while it comes up with a dialog box "Wireless Network Authentication Required" and in response I enter the WPA password but with no success.The behaviour would indicate that I am entering the wrong password but I am not.I have checked it several times and compared with the password that works with the laptop.
View 3 Replies View RelatedNeed help, ubuntu keeps connecting and disconnecting to my wireless router. whenever i am able to get it to connect for a significant amount of time, i still have no access to the internet.
using ubuntu 10.04
using Linksys router, not sure what model but can find out.
using toshiba satellite laptop
I am able to access my router and internet in Windows without any problem
dont have anything of importance on ubuntu install, so i could reinstall but would rather not so that i could fix this problem in the future.
I have installed Ubuntu x86 10.04 LTS onto an old Dell machine which is connected to my broadband modem and Netgear Wireless Router (WGR614 v6). The router is encrypted with 64-bit WEP and allows my System76 Pangolin Performance laptop to connect flawlessly out of the box. However, my sister runs Windows XP Professional 32-Bit on a Dell Latitude D830. This machine's wi-fi card is an Intel PROSet Wireless which recognizes the router but can't access it.
What should I do on her laptop in order for her to access the wi-fi router?
router comtrend CT-536T but now my laptop lenovo r61i is not able to connect to it. like it has a issue with wap/wap1. Is their a possibility to get it to connect. the other router maxG (US robotics) is wep/hex based. any suggestions ? It only made a connection the first time and after the signal wasn't even noticeable .
View 2 Replies View RelatedI want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies View Related