I just finished installing Lucid Lynx on an iMac7,1. So far, everything looks good, except for the fact that I am unable to access my external firewire drive. I know that outside of the Mac world, firewire isn't seen very often, but I was under the impression that it was supported. It doesn't show up in the /mnt directory of my new system, or my desktop. Then again, I am new to Ubuntu, and the filesystem looks a bit different from Mac and Debian, the two other *nix filesystems that I am the most familiar with. It shows up fine in Snow Leopard.
I have successfully installed ubuntu on a seagate goflex hd and can get it to boot with using a usb cable and refit on my mac. But I cannot get it to boot with a firewire cable and I have not seen any instructions on how to do this with an intel imac, only a ppc.
The mac does recognize the external hard drive when I hold the option key when I turn on the mac, but I get a "no bootable device found" error once I select it...same thing happens with refit and firewire cable. Any ideas on how to get this to work? I am ok with running it via usb cable, but would like the firewire option.
I'm not sure if I have a hardware or OS problem. Firewire on my old G3 iMac has stopped working. Previously I've used a scanner and an external hard drive (Iomega eGo) without problems while running Lucid. Now neither works with the iMac, though they both work when connected to a PC. Both the PC and the iMac are running the latest versions of Lucid.
I can't tell when the problem began since I don't use the scanner or hard drive that often. I did try booting using the live 10.04 CD for PowerPC and had no joy with either device.The LCD on the hard drive lights when connected to the firewire port so power is coming through. The scanner has its own power supply.Checking with lsmod I see that both the modules ieee1394 and ohci1394 are loaded.I suspect it's a problem with the hardware. Does any one have an idea how I can go about verifying that? I'd hate to bin an old faithful without first checking everything out.
Recently my laptop broke down and wont start up. I'm currently trying to recover my files to my mac with an IDE to USB cable. It recognized my windows partition fine and I was able to get all my files off of that, but the majority of my stuff is on the ext4 partition that I have on it. Does anyone know how to access the ubuntu partition of this hard drive from my mac?
I have a Macbook Pro 5,5 with Ubuntu 9.10 installed using rEFIt. When I mount the Macintosh HD in Ubuntu, I am unable to access any of the folders under Users, except Public. I tried changing the permissions in OSX, setting "Read and Write" for "Everyone" on a couple of folders, and, when I log back into Ubuntu, I can see that those are the permissions for the folder, but Ubuntu still tells me that I do not have permission to access the folder. I've tried setting the folder to share, thinking that this must be the reason that I can access Public with no problems, but it didn't work.
I've browsed the internet extensively, and the only thread I could find related to the issue was by someone who had the exact same problem as me (I don't know if they had the same macbook though), and it was never solved (the only advice given was to either change the Ubuntu user number, or change the permissions of the folder).
I just installed a new clean copy of Ubuntu 11.04 onto a Dell XPS M1710 laptop. I believe it has a generic Texas Instruments Firewire controller. Plugging in a standard Firewire disk does nothing. If I boot with the device and run �dmesg|grep firewire�, I get:
Code:
[ 1.327138] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.388103] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 1.888144] firewire_core: created device fw0: GUID 354fc0001a369961, S400
[code]...
How can I install the necessary modules to make this work?
Is there an application that allows one to 'export' a drive or virtual disk image to firewire so that the machine at the other end sees the computer as a regular firewire drive? Apple computers can do that via their target disk mode (hold down t on boot), but I am searching for an application that would work under Windows or Linux.The goal is to boot an older Apple iBook, which can not boot from USB, via this emulated firewire drive.
With CentOS-5.5, centos plus enabled, my LaCie external hard drives are not recognized even though connected and powered up before booting. I am logging in as root. Previous 2.4 kernel RHEL Enterprise 3 required a special scanning script which worked with this computer. This current system will not recognize the drives as hardware. On the other hand the drives with USB 2.0 ports automount connected with USB and also are recognized in the hardware list. what diagnostics to do to find out what layers / drivers are missing.
Im having a serious issue with booting ubuntu 10.04, the issue being it wont boot up at all, after working so well for so long (i suspect some recent dodgy system updates are responsible) so I decided to just reinstall ubuntu from scratch again but wanted to retrieve some important files from my root device. So I am running the live desktop and I can see my previous filesystems under places but cannot mount or open my original root device where the files I want to recover are located, I receive this error msg:"Unable to mount 77 GB Filesystem.
Unable to access linux(ubuntu 10.10) share drive on my windows PCIn my office we have few linux (obuntu 10.10) computers and 3 computers running on windows. We have data stored on one of the shared drives of a linux(ubuntu 10.10) system which has samba installed and we are able to access that folder from other linux systems and 1 windows xp system where it asks for user name and password and is able to access the data while in other 2 windows systems (with 1 having xp and 1 having windows 7) we are unable to access the folder because it does not ask for user name and password and it shows an error network drive not accessible as you may not have the permission.
I have a cd drive and a dvd drive in my computer, two seperate drives. Is there a way to disable the CD drive only in openSUSE 11.2, i only want to be able to access the DVD drive?
I want to add a Lacie external drive to x64 box with SL55, but it has only Firewire interface. After searching a bit the net I could not find a working solution how to make the PCI card and the drive recogizable by the system, even if I removed Firewire from RHEL blacklist. The system does not see this piece of hardware. Does anyone has a positive experience with RHEL/SL with that issue? Similar trends search lists only quite old treads - ane recent experience?
Running fedora14 on a dell latitude-d600 laptop and I'm trying to access a 500gb sata external hard drive that is connected via usb. The laptop can see the drive as '500 GB Hard Disk: 524 MB Filesystem' and it's clearly mounted under the '/media' directory. However, when I attempt to read the files on it, I am only able to see the 524mb section of the drive. The external hard drive is an ext3 file system (running fedora13) and I believe it's encrypted.
I have installed 10.04 on my MacBook Pro 6,2, and am trying to access some files stored in my User directory on the OS X partition of the laptop. I get a permission-denied error, but I figured this was a similar issue to the one mentioned in the stickied "How to Install Ubuntu 9.04 on Intel-Based Macs" thread.However, the suggest fix,Code:sudo usermod -u 501 -g 20 richarddoesn't exactly work for me. I tried this, but found myself suddenly logged out of my main account. On the log-in screen, only my second account showed up. Luckily, I was able to log into that, and re-usermod my main account back to it's original userid number.I am guessing that my strange error had to do with the abnormal (for ubuntu, at least) userid?
My dell notebook runs Ubuntu (Karmic Koala). I want to be able to remote access my mom's Mac notebook (I believe it's an Airbook?), so that I can assist her with problems on her computer.What would I need to do on my computer (and how?)What would I need to do on her computer (and how?) to set this up?
I have Ubuntu installed on my Macbook Pro but when I am mount my mac partition by clicking on it in Nautilus some of my user folders are not accessible unless I start Nautilus as root. Is there a simple way for me to make these folders accessible?
I am trying to access my music folder in my OSX partition but every time I click double click on it I get an error message that says "You do not have the permissions necessary to view the contents of "Music".
ok so i ran into a problem, im using web min to access my server, and im setting up postfix and, dovecot first problem is i want to be able to access my email account from a web page, with log in, so my question is how can i do that?
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
I want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
I am running a hp dv701175nr laptop and am booting ubuntu 11.04 from a usb flash drive. I can not seem to find my internal drive that has windows 7 stored on it. I tried to mount it but it give me this error:
Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed
I can't use this operating system if I can't access my windows 7 drive and I really want to use this OS .
EDIT: Okay, so I think I have found my problem, but I don't know how to fix it, there are differences in my mtab and fstab commands, I will post what they say in a second, but I do not know how or what I need to do to change and make the settings right
I have a Macbook Pro with a b0rked DVD drive, and want to install Ubuntu on it.
I have followed the instructions here: [URL]
But when rebooting and holding ALT, I don't get the option of booting from USB.
Possibly related, when I view the USB drive in Disk Utility it's marked as "Bootable: no" :
I've tried this with two different USB sticks.
I've also burned a Ubuntu install disk from the original ISO, loaded it into another mac and started that mac in Target Disk Mode. Then I connected them with Firewire, rebooted the mac *without* the disc drive, held ALT and chose the shared disc as the boot device. Though weirdly it was named "Windows". Sadly, I then got a message on a black background saying it was not a bootable device.
I have a Ubuntu box with two drives, one of them is where Ubuntu is installed and the other one is where I store all my music, photos and other documents. I recently bought a Mac and I want to be able to access the drive where I have all my documents from my Mac. Is there a way to accomplish this? I've been looking all day for an answer to this but all I can find is how to share a folder instead of a whole drive.
I was looking in the disk utility today, and i was looking in the hard drive formatting section. in the drop down box, i noticed Apple. does that mean that i could format the rest of my hard drive to be OSX compliant?
rEFIt can not see my USB thumb drive during boot, therefore can't install. Tried using the dd utility to copy the Ubuntu ISO to a spare partition on my internal hard drive. Now, rEFIt sees that drive but attempting to boot into it gives me a 'Missing Operating System' message. So I'm back at trying to get the system to boot from the pendrive.
