CentOS 5 Hardware :: Firewire Drive Not Recognized?
Aug 27, 2010
With CentOS-5.5, centos plus enabled, my LaCie external hard drives are not recognized even though connected and powered up before booting. I am logging in as root. Previous 2.4 kernel RHEL Enterprise 3 required a special scanning script which worked with this computer. This current system will not recognize the drives as hardware. On the other hand the drives with USB 2.0 ports automount connected with USB and also are recognized in the hardware list. what diagnostics to do to find out what layers / drivers are missing.
View 9 Replies
ADVERTISEMENT
May 25, 2010
I have a Maxtor external storage HDD with firewire (1394) interface.
When I connected it with my computer, which is running an up-to-date Debian squeeze, it was recognized as "/dev/sda1" and replaced the existing partition on the computer.
View 2 Replies
View Related
Feb 21, 2009
I just installed centos 5 on a hp dl380 server and it has 2 72.8 scsi gig hard drives. The problem I am having is that only one hard drive is being recognized and it is not being recognized as a scsi. This is what I get from fdisk -l
Disk /dev/cciss/c0d0: 72.8 GB, 72833679360 bytes
255 heads, 63 sectors/track, 8854 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 13 104391 83 Linux
/dev/cciss/c0d0p2 14 8854 71015332+ 8e Linux LVM
as you can see, the system doesn't even see the second hard drive. How do I get both hard drives to be seen and how do I get them to be recognized as scsi?
View 2 Replies
View Related
Dec 28, 2010
I tried to install Centos 5.5 on a new IBM X3650M3 7945 and the hard drive was not found. (actually 1 SAS 300 Gb in slot 1)
View 1 Replies
View Related
Oct 20, 2010
Is there an application that allows one to 'export' a drive or virtual disk image to firewire so that the machine at the other end sees the computer as a regular firewire drive? Apple computers can do that via their target disk mode (hold down t on boot), but I am searching for an application that would work under Windows or Linux.The goal is to boot an older Apple iBook, which can not boot from USB, via this emulated firewire drive.
View 2 Replies
View Related
Jun 11, 2011
I just installed a new clean copy of Ubuntu 11.04 onto a Dell XPS M1710 laptop. I believe it has a generic Texas Instruments Firewire controller. Plugging in a standard Firewire disk does nothing. If I boot with the device and run �dmesg|grep firewire�, I get:
Code:
[ 1.327138] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.388103] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 1.888144] firewire_core: created device fw0: GUID 354fc0001a369961, S400
[code]...
How can I install the necessary modules to make this work?
View 1 Replies
View Related
Oct 24, 2010
I just finished installing Lucid Lynx on an iMac7,1. So far, everything looks good, except for the fact that I am unable to access my external firewire drive. I know that outside of the Mac world, firewire isn't seen very often, but I was under the impression that it was supported. It doesn't show up in the /mnt directory of my new system, or my desktop. Then again, I am new to Ubuntu, and the filesystem looks a bit different from Mac and Debian, the two other *nix filesystems that I am the most familiar with. It shows up fine in Snow Leopard.
View 5 Replies
View Related
Oct 19, 2010
I have an IMAC (I7) that is running CENTOS 5.4 on and need to be able to mount a fireire disk automatically when plugged in. We can do this manually running: fdisk -l then choosing the correct disk and mounting it
mount /dev/scd1 mnt The problem we have is that this machine needs to go in a client office on the other side of the world and we need it to be idiot proof. I need to be able to autodetect and mount the disk like you would if it was running OSX. Obviously the hardware works, just the automount or autodetect does not work.
We've already commented out the blacklist in /etc/modprobe.d/blacklist-firewire Is there some other setting I need to automount the disk. Alternatively I'll have to write an application to perform the fdisk and mount as root, which I don't particularly want to do.
View 1 Replies
View Related
Nov 5, 2009
I am relatively new to CentOS. I attempted to install 5.3 with firewire several weeks ago and abandoned the install because it was taking too long to figure out the problems. I've had to revisit this and am having troubles with it. I was told that CentOS 5 has firewire 1394 support. When I did the typical install, it didn't physically (manually) install the video1394 and raw1394 modules. At boot up, my computer says that video1394 and raw1394 are "Module(s) not found". If I do <lsmod> I get (*snippet of o/p),
Module Size Used by
lockd 63081 0
sunrpc 145405 2 lockd
dm_mirror 24393 0
dm_multipath 24909 0
scsi_dh 11713 1 dm_multipath
[Code]...
I have found several other posts on the web that indicate I have to get the latest source files, but I do not know which one is the correct one or where to find it. Can anyone ponit me in the right direction? Is there anything else that I need to do?
View 3 Replies
View Related
Jul 9, 2011
I want to add a Lacie external drive to x64 box with SL55, but it has only Firewire interface. After searching a bit the net I could not find a working solution how to make the PCI card and the drive recogizable by the system, even if I removed Firewire from RHEL blacklist. The system does not see this piece of hardware. Does anyone has a positive experience with RHEL/SL with that issue? Similar trends search lists only quite old treads - ane recent experience?
View 18 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Aug 10, 2011
I am running Ubuntu 10.04.03 on an ASUS P5VD2-X. There are numerous HDD attached, but one is uniquely Win XP, the other uniquely Ubuntu. Boot choice is via a GRUB loader. Ubuntu is the first choice normally. The problem is that more often than not, the system does not seem to be able to recognise the CD or DVD reader/writer. On some random occasions, they are recognised, but mostly not. But - and here is the upsetting bit - this problem never occurs when I boot up on Win XP. The CD/DVD devices are instantly and reliably recognised each and every time. So I guess that rules out a hardware or BIOS problem. This is a particularly annoying problem as use of the optical drives is required frequently, and it galls me having to revert to Windows just to use them.
View 1 Replies
View Related
May 9, 2010
My Friend's Pen Drive, which was working well very well just few days ago, is not being recognized after getting used by a virus affected machine. Its not on fdisk -l or lsusb. However in dmesg I can see the following:
[977.300013] usb 5-2: new full speed USB device using uhci_hcd and address 2
[977.420014] usb 5-2: device descriptor read/64, error -71
[977.644023] usb 5-2: device descriptor read/64, error -71
[977.860013] usb 5-2: new full speed USB device using uhci_hcd and address 3
[977.980013] usb 5-2: device descriptor read/64, error -71
[978.204013] usb 5-2: device descriptor read/64, error -71
[978.420013] usb 5-2: new full speed USB device using uhci_hcd and address 4
[978.828015] usb 5-2: device not accepting address 4, error -71
[978.940015] usb 5-2: new full speed USB device using uhci_hcd and address 5
[979.348013] usb 5-2: device not accepting address 5, error -71
[979.348292] hub 5-0:1.0: unable to enumerate USB device on port 2
[1017.848015] usb 5-2: new full speed USB device using uhci_hcd and address 6
[ 1017.968012] usb 5-2: device descriptor read/64, error -71
[ 1018.192017] usb 5-2: device descriptor read/64, error -71
[ 1018.408014] usb 5-2: new full speed USB device using uhci_hcd and address 7
[ 1018.528012] usb 5-2: device descriptor read/64, error -71
[ 1018.752023] usb 5-2: device descriptor read/64, error -71
[ 1018.968012] usb 5-2: new full speed USB device using uhci_hcd and address 8
[ 1019.376019] usb 5-2: device not accepting address 8, error -71
[ 1019.488011] usb 5-2: new full speed USB device using uhci_hcd and address 9
[ 1019.896016] usb 5-2: device not accepting address 9, error -71
[ 1019.896308] hub 5-0:1.0: unable to enumerate USB device on port 2
[ 1049.984016] usb 5-1: new full speed USB device using uhci_hcd and address 10
[ 1050.104014] usb 5-1: device descriptor read/64, error -71
[ 1050.328014] usb 5-1: device descriptor read/64, error -71
[ 1050.544014] usb 5-1: new full speed USB device using uhci_hcd and address 11
[ 1050.664018] usb 5-1: device descriptor read/64, error -71
[ 1050.888019] usb 5-1: device descriptor read/64, error -71
[ 1051.104025] usb 5-1: new full speed USB device using uhci_hcd and address 12
[ 1051.512014] usb 5-1: device not accepting address 12, error -71
[ 1051.624101] usb 5-1: new full speed USB device using uhci_hcd and address 13
[ 1052.032014] usb 5-1: device not accepting address 13, error -71
[ 1052.032991] hub 5-0:1.0: unable to enumerate USB device on port 1
What these Errors actually mean and how Can I get this pen drive Back to work?
View 3 Replies
View Related
Feb 19, 2010
I have a 2nd hard drive (500 GB) that I keep my media on. When I tried to access it, it wasn't showing up in places or even places > computer. I used system > administration > disk utility. On the left hand side it shows the drive listed with the type and model number. Right under that it shows 500 GB Hard Drive unrecognized unknown or unused. If possible I would like to recover the media on this drive. I had setup this drive as ext3 and had it mount /media/sdb1. I can go to /media/sdb1 in the file browser but nothing is there.
View 9 Replies
View Related
Aug 1, 2010
i tried to connect my samsung usb mp3 player and it is not showing up in mycomp. i tried to debug the issue but being a noob i didnt get anywer.
View 2 Replies
View Related
May 2, 2011
External USB 3 drive not recognized after upgrade to Natty. Works fine and is recognized immediately when plugged into USB 2. Occasionally the drive is recognized with USB 3 when plugged/unplugged. Worked fine in Maverick (with USB 3)
View 2 Replies
View Related
Oct 16, 2009
I am having trouble with getting my flash drive recognized. I would love a simple answer.
View 4 Replies
View Related
Mar 1, 2010
I recently upgraded from 9.04 to 9.10 and now my cd/dvd-r drive doesn't exist. When I run sudo lshw -c disk command I get
*-disk
description: ATA Disk
product: WDC WD1600AAJB-5
vendor: Western Digital
physical id: 0
bus info: scsi@0:0.0.0
logical name: /dev/sda
[Code]...
It shows all my drives (including the little usb flash drive) but I can't get to the drives from "computer" all it shows is cdrom0 floppy0 and filesystem
View 1 Replies
View Related
Jan 1, 2010
I have a weird problem with an sata partition. This drive is onle volume of an md raid set, and has one partition filling the whole drive. of type "fd" ( linux raid autodetect). When my machine boots, the drive containing this partition is present as /dev/sdc. However, the partition is not - there is no /dev/sdc1. If I look at the partition table in fdisk, all appears to be fine. If I do anything that causes the partition table to be rescanned (such as writing in fdisk, or running partprobe, ... ), the partition shows up fine at that point and all data is present and when I assemble the RAID using it, its in sync. This drive is attached to the same (motherboard) controller as my other drives which have their partitions recognized just fine.
View 5 Replies
View Related
May 9, 2010
i'm trying to install mint 8 on a new hard drive but my pc doesn't recognized it. neither does the live boot mint cd. when i get to create partition it just hangs there.do i need to format the new drive using my old one first?
View 1 Replies
View Related
Jun 8, 2010
I had windows 7 installed on my machine and decided to go with a ubuntu win7 dual boot. The install went fine, but Ubuntu doesn't see my second HDD as anything but empty. My second HDD I set up in win7. It is actually two 320GB HDD striped together. It is holding alot of data that I would like to be able to access from both win7 and ubuntu.
When I run fdisk -l in the terminal I get:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf1c572ca .....
So Ubuntu sees the two HDD, just not as one with all my data on it like I see it in windows. Is there a way to set it up so I can use that second HDD (the two stripped) in both win7 and Ubuntu?
View 2 Replies
View Related
Aug 1, 2010
I am trying to install this OS. However no matter what I do the UBUNTU instllation CD doesn't recognize the hard drive on which I would like to install the OS on.
I currently have two SATA hard drives connected to my computer. MY primary is my Windows 7 drive and my second hard drive is my spare.
When i load up UBUNTU and get to the window where I can select which hard drive/partition to install to my second spare drive isn't there.
View 4 Replies
View Related
May 1, 2011
rEFIt can not see my USB thumb drive during boot, therefore can't install. Tried using the dd utility to copy the Ubuntu ISO to a spare partition on my internal hard drive. Now, rEFIt sees that drive but attempting to boot into it gives me a 'Missing Operating System' message. So I'm back at trying to get the system to boot from the pendrive.
View 9 Replies
View Related
Aug 17, 2010
I'm running Ubuntu 10.04, and am having trouble getting it to recognize my flash drive in the USB port. It showed up once in the Computer - File Browser and I was able to mount it and access the files on it, but since then it doesn't show up. It works fine on my Ubuntu 9.10 distro. I get the same results on both distos when I run #lsusb# The results are:
Code: Bus 001 Device 002: ID 05dc:a701 Lexar Media, Inc. JumpDrive FireFly
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I can access the flash drive?
View 3 Replies
View Related
Nov 16, 2009
Got a refurbished laptop recently and installed Ubuntu 9.10 on it without any problems, but the computer won't recognize my USB flash drive.
View 1 Replies
View Related
Jan 5, 2010
I have NTFS partition which is recognized as vfat in /etc/fstab. Here is my /etc/fstab:
Code:
/dev/sda3 swap swap defaults 0 0
/dev/sda4 / ext3 defaults 1 1
/dev/sda1 /c ntfs-3g umask=000 1 0
code]....
View 13 Replies
View Related
Apr 26, 2011
I recently did a fresh Maverick install on my old Medion laptop (MD 42200), and a problem occurred.
The problem is that the CDROM-drive is not recognized by Ubuntu. There is no icon on the desktop when I insert a disc, and I can̈́'t find it in either /media, /cdrom or /dev.
I can see it in the standard Disc Tool program, where it is listed as being located in /dev/sr0, and it is visible in a downloaded Device Manager.
What can I do to access my CDs?
View 4 Replies
View Related
Jun 16, 2010
I have an external hard drive that connects through an expansion card with eSATA on it. It was partitioned and formatted as NTFS in Windows but isn't recognized in Ubuntu 10.04.
View 1 Replies
View Related
Jul 20, 2010
I am trying to run You Don't Know Jack in wine - appdb says it has Platinum status, so compatibility shouldn't be the issue. My laptop doesn't have an optical disk drive. So, I ripped the disk to an iso image, mounted it with gmount-iso, and tried to open the program.
The program still says the disk is not inserted. I know on previous laptops with optical drives, I could mount an image on /dev/cdrom0 or /dev/sr0 or whatever and it would be recognized. My /dev directory had no cdrom0 directory, so I made one. I mounted the iso there but it still didn't recognize it. I've tried in my home folder, in /cdrom, and in my newly-created /dev/cdrom0 but no luck.
View 1 Replies
View Related
Mar 30, 2011
So my World Book Network Drive stopped working all of a sudden and I decided to remove it from the enclosure and plug it in via USB. I can see it in Disk Utility, I took a snapshot of it and attached it here. Normally when I plug a hard disk into ubuntu you can see it in places, not the case with this one. I would like to try and retrieve the data from it?
View 1 Replies
View Related
