I have a cd drive and a dvd drive in my computer, two seperate drives. Is there a way to disable the CD drive only in openSUSE 11.2, i only want to be able to access the DVD drive?
View 6 RepliesI just installed opensuse 11.2 and was invented with a issue where usb was not detected by the OS.
i tried lsusb no details were display
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies View Relatedi am not able to access my pen drive on slack ware
View 3 Replies View RelatedIm having a serious issue with booting ubuntu 10.04, the issue being it wont boot up at all, after working so well for so long (i suspect some recent dodgy system updates are responsible) so I decided to just reinstall ubuntu from scratch again but wanted to retrieve some important files from my root device. So I am running the live desktop and I can see my previous filesystems under places but cannot mount or open my original root device where the files I want to recover are located, I receive this error msg:"Unable to mount 77 GB Filesystem.
View 2 Replies View RelatedRunning fedora14 on a dell latitude-d600 laptop and I'm trying to access a 500gb sata external hard drive that is connected via usb. The laptop can see the drive as '500 GB Hard Disk: 524 MB Filesystem' and it's clearly mounted under the '/media' directory. However, when I attempt to read the files on it, I am only able to see the 524mb section of the drive. The external hard drive is an ext3 file system (running fedora13) and I believe it's encrypted.
View 14 Replies View RelatedI just finished installing Lucid Lynx on an iMac7,1. So far, everything looks good, except for the fact that I am unable to access my external firewire drive. I know that outside of the Mac world, firewire isn't seen very often, but I was under the impression that it was supported. It doesn't show up in the /mnt directory of my new system, or my desktop. Then again, I am new to Ubuntu, and the filesystem looks a bit different from Mac and Debian, the two other *nix filesystems that I am the most familiar with. It shows up fine in Snow Leopard.
View 5 Replies View RelatedUnable to access linux(ubuntu 10.10) share drive on my windows PCIn my office we have few linux (obuntu 10.10) computers and 3 computers running on windows. We have data stored on one of the shared drives of a linux(ubuntu 10.10) system which has samba installed and we are able to access that folder from other linux systems and 1 windows xp system where it asks for user name and password and is able to access the data while in other 2 windows systems (with 1 having xp and 1 having windows 7) we are unable to access the folder because it does not ask for user name and password and it shows an error network drive not accessible as you may not have the permission.
View 3 Replies View RelatedI've got an USB-to-IDE hard disk drive enclosure to revive an old IDE harddrive. I installed the drive and connected it to my pc running opensuse 11.2. Unfortunately the drive wasn't recognised, so I couldn't access it. This is the output of dmesg:
Code:
May 18 18:53:57 advo kernel: [81051.520117] usb 1-4: new high speed USB device using ehci_hcd and address 10
May 18 18:53:58 advo kernel: [81053.041979] usb 1-4: New USB device found, idVendor=058f, idProduct=6391
May 18 18:53:58 advo kernel: [81053.042107] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 18 18:53:58 advo kernel: [81053.042208] usb 1-4: Product: USB TO IDE Bridge
[Code].....
I have a back up hard drive I cannot access. When I try to move folders there I get the message 'access denied'. It is probably a simple permissions problem.I need some help to get permission to access it.
View 7 Replies View Relatedjust want to download the 60mb-ish pack of family photos from my external usb hard drive. I've gone through a multitude of wikis and help threads and can't seem to figure out how to copy and paste those files to my laptop The usb hd works perfectly as I just was using it about 1 hour ago when I still had vista on this laptop. Here's a copy of my fstab as that seems the file all the wiki's:
[Code].....
I have installed SUSE yesterday.Everything has been fine except two.1. I can't access my hard disk drives. It says it need to install online some software for it but it can't.I am attaching a screen shot of the error I encounter.2. I have Ubuntu installed in another disk drive but in the Grub menu there in no option to boot to Ubuntu OS.How should I change the text in 'menu.lst' to solve the problem?
View 6 Replies View RelatedInstalling from Live USB: Installing from USB on my desktop (used this method for laptop install) goes without a hitch. EXCEPT, I notice there is no support for my wireless card chipset (Atheros 7413, used /bin/lspci to find). I download the drivers for Linux, but I need Make to build the drivers...ok. I download the Make files from my laptop, make coffee, slap the makefiles onto a flash drive and run the configure file on my desktop version of SUSE. Whoops, need a c compiler (odd that openSUSE did not come with gcc? bit confused on that). If you can't tell by now, I've been using linux for less than a month so I am what you would call a noob? After the lack of c compiler, I drove to my office to snag some DVDs to download the DVD iso image, hoping it would have some form of c compiler/make packaged, since the description does say the DVD has more software (can't find any prebuilt versions of either...?)
Installing from DVD: This was my next step. I wrote the iso image to a DVD and proceeded to boot from DVD. The installer fails at the system analysis, saying it cannot "create a repository". writing the iso to a second DVD produces the same result. Googling has not yielded a solution. tl;dr can't use openSUSE on my desktop because my wireless chipset is not suported by SUSE. I need Make to build the drivers, but I need a c compiler to compile Make, and I need the internet to get both for my machine.
I'm unable to get into my university's WLAN network. LAN works just fine, but sometimes it's quite convenient to be able to access stuff wirelessly. It doesn't seem to be a hardware problem, because if I configure my computer according to our computer department's instructions it works fine with Ubuntu (currently I carry around a stick to get into the Internet when I really need it and don't have a cable). Some info:
My device:
Broadcom WLAN controller on a Lenovo G560
My system:
OpenSUSE 11.3 64-bit
The drivers are installed, I can get into normal private networks, but have never managed to get into the university network except for with Ubuntu.
The university instructions tell me to use the following settings:
Security: WPA Enterprise
Authentification: TTLS
Inner Authentification: PAP
Username: My username
Password: Password
CA Certificate: Deutsche_Telekom_Root_CA_2.pem
In the KDE instructions, they tell you to write "anonymous" into the anonymous identity field, but in the GNOME instructions it says to leave it blank. In Ubuntu, I leave it blank and it works.
I've got the recommended settings, which also work in GNOME.
I'd ask the tech support here, but I am the tech support We've got it working with other systems, like I said, but not with SUSE, and I'm a SUSE fan.
The only way I can eject a cd from either of my drivers is to restart my pc. The buttons don't work and neither does the eject control withing the device widget in my panel. It says the device is in use even though I am done with it. This is stupid. Everything else in this operating system is beautiful and works great (except the version of Audacity had to be replaced with one that is actually usable.) Other than that everything is great , way better than windows - but I can't do something as SIMPLE as eject a cd??? How stupid is that?? I am actually angry - being angry at a computer is something that happens when using windows computers - should not happen whilst using OpenSuse.
View 5 Replies View Related I can put a CD or DVD in the drive, mount it, read it & unmount it. But I cannot take the disk out of the drive once it has been place in the drive without
1) Physically holding the CD draw open
2) Shutting down SUSE.
As soon as the drive starts to eject the disk, the draw is forced closed again. This happens if the eject button is pressed, or the sudo eject command is issued. For some reason, the draw is being instructed to close again almost immediately after it opens. I've managed to extract disks by grabbing the draw when it starts to open, but I'm afraid I will damage the drive this way.I do not think this is a hardware issue, as other OSs run on this system do not seem to have this problem.
I'm running openSUSE 11.1 32-bit and I'm trying to use my external USB DVD-RW drive. I've tried loading two 11.1 discs in the drive and both of them fail.After putting the dvd in the drive I mount with::mount/dev /scd0 /media/cdrom
and it comes back with:mount: wrong fs type, bad option, bad superblock on /dev/sr0, missing codepage or helper program, or other error.In some cases useful info is found in syslog - try dmesg | tail or so.Second question is can I use this external USB DVD-RW drive to install linux from, or does it have to be an internal drive? If so is there anything special I need to do to get it to look at the drive during boot. I take it this is dependant on a BIOS setting. This is all assuming of course I can get my dvd's to read.
i jsut installed opensuse kde and xfce and i cannot mount dvd/cd 's. i am using opensuse 11.3 32 bit. i added my user to the cdrom drive group but still no luck. How to get the cd to mount by jsut clicking on the dolphin icon?
View 9 Replies View RelatedI have a 4gig usb flash drive that opensuse can not see. I have other usb drives that work fine.
View 10 Replies View RelatedI have recently zypper dupped to opensuse 11.4 from 11.3. My only problem is I am unable to access my address book when I click <select> when sending a new message; only recent addresses show in the window that pops up. Even if I select <all> in the list of choices, only <recent addresses> show up. In the useful tips that appear upon opening K-mail it states that if I click on < folders> then < Mailing list management> I will be able to select and manage all of my address books. But when I click on <folders> the <mailing list management> is faded telling me that it is not enabled. My question is what must I do to enable the mailing list management to be enabled? I have enabled mailman with no help.
View 1 Replies View RelatedI did the latest update on the opensuse 11.4 other day and since then my USB drive is not mounting. initially I thought its gone because my son dropped on the floor. But then when I plugged it to Windows 7 machine it mounted then I plugged it into another Ubuntu 10.10 machine it mounted so I figured out the there is some issue in the latest update. I have all the VMs in this drive and my main laptop is with OpenSuse 11.4
View 9 Replies View RelatedI am running OpenSuse 11.4 with Gnome3, with 2 hard drives. One is for the system and has three partitions - root, swap, and home. The second is only data storage. Last week I started getting popups stating I had a hard drive going bad. I checked SMART status in disk utility and had several bad sectors on the system drive, so I cloned the drive to a new one with Clonezilla. Here is where everything went kooky. When I booted the new disk I had a ton of errors at boot along the lines of unable to find a drive. Upon closer inspection I realized the the system located the drives by device id instead of the traditional /dev/sdx. So I started playing with grub settings but never could get it to stop looking for the old hdd. Next, I popped in my net install disc and found I could do an upgrade install which proceeded normally. When I rebooted, no more boot errors, but I get to the black screen with spinning cursor and it will not proceed any further, I even let it run overnight and when I woke up, spinning cursor. As for troubleshooting, I was able to CTRL+ALT+F2 to a console and log in as root successfully but not as a user. When I try to log in as a user, I enter my username, then password, the "have a lot of fun" flashes by quickly and I am returned to a login prompt. I logged in to the console as root and created a new user and tried logging in again, but same thing. I am able to do an ls -l on /home/mike and all my files are there and the listed permissions look ok. I am at a loss as to what to try next. My old hdd will still boot, I just pulled it to reduce risk af data loss. I have never used auto yast before but I always see the prompt for it during an install. Can I clone the system with auto yast on to a different hard drive. Does it strip the by-device-id from the image? Which logs should I check?
View 5 Replies View RelatedI'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
Quote:
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503
usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
[code].....
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
i have a 4gb kingston 'ur drive' usb stick but i am unable to delete files from it. i have another usb stick a PNY 8gb stick whick works ok, but not the 4gb.
View 9 Replies View RelatedJust installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
I have mentioned this in another thread elsewhere but perhaps this is a better location. In Opensuse 11.3 I was able to play files on my NAS drive from within smplayer over samba shares or ftp. I would simply use dolphin to browse to the file on the nas drive (either through samba or ftp protocol), double click the .avi file and it would load smplayer and begin playing immediately.
In 11.4 I have samba set up using the same smb.conf file However, if I double click the .avi file it copies the entire contents to the local computer before launching smplayer. If I use smplayer's file selector and navigate to the file on the samba share I get the message "you can only select local files" This is a different behaviour to that from 11.3 However, using the ftp protocol from within dolphin smplayer launches immediately and begins playing. smplayer is launched using the shortcut command
Code:
smplayer %U
Does anybody have any suggestions on a workaround or how to correct? Using kaffeine I have no problems. Double click the file on the nas drive and kaffeine launches immediately and begins playing.
ok so i ran into a problem, im using web min to access my server, and im setting up postfix and, dovecot first problem is i want to be able to access my email account from a web page, with log in, so my question is how can i do that?
View 1 Replies View RelatedI've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
I want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
View 2 Replies View Related