I reinstalled Mac OSX and my Mac files on my 24" intel core 2 duo iMac from a Time Machine backup. The Linux and Swap partitions appear to be unaffected. However, rebooting into Linux 8.04 stops at the Grub stage.
View 7 RepliesA few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
I'm trying to reinstall Mac OS X on a single boot Linux powerbook, but have no idea what to do because to my understanding ubuntu wont read a .DMG file, does this means that I have to burn it? Or maybe convert into an .ISO and then burn? Or can it be done from within the machine from an .ISO?
View 7 Replies View RelatedI just upgraded by box from Fedora Core 9 to Centos 5.2. Finally!I have a 500GB SATA drive, it's partitioned into three equal size slices, hda1 through 3. The old Fedora was on hda1, I installed the new Centos on hda3. I instructed the installer to write the MBR to /dev/hda, not /dev/hda3. Fdisk says I have sector 0 unused.First, the system wouldn't boot - it just looped through the BIOS, rebooting over and over again. The BIOS sees the disk, but it never loaded Grub. I tried re-running grub-install /dev/hda, and not I get a Grub Error 17 after stage 1.5 loads.
I can boot from rescue OK, the grub.conf man menu.lst look fine, it's pointing to "root (hd0,2)". It's either the BIOS that can't find the MBR, or the MBR can't find Grub.When I looked at the disk with fdisk after the install, hda1 was still marked bootable, hda3 was not, so I swapped bootable flags but that has not made a difference. I also appended the new grub to the old grub thinking I could get the MBR (if it is there) to load the old grub and thence find the new Centos, but that didn't work either.Mobo is an old Shuttle AK35.Any ideas? Did I mess up by not telling the system to put the MBR on /dev/hda3? Is there a way to fix this without reinstalling?
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)
I installed the latest updates earlier today. Instead of restarting I just shut the machine down after updates were installed. now I can't boot into Fedora 12. I booted using the live cd and all my files seem to be in order except there is nothing in the boot folder. Is there anyway to reinstall boot/grub from the live cd? I do have a backup copy of a previous menu.lst.
View 9 Replies View RelatedI am running Windows 7 and openSuse 11.3 as a dual-boot system. I had to run a Windows 7 Startup Repair, which apparently reset the Windows boot loader, so now I am not getting Grub. How do I reinstall or reactivate the Grub boot loader? I am assuming I have to use the installation DVD?
View 6 Replies View Relatedok so i jut installed ubuntu from an old live cd, i had to upgrade it twice to get it currant, and i also have a win 7 os on my box. Now when I try to boot I only get as far as the grub loading screen where an error 17 pops up, google says thats because it can't boot the selected boot partition but i cant even select my windows partition. im on the old live disk right now.
Here's a screenshot of a sudo fdisk -l command [url]
how do I retrieve/reinstall Grub without having to reinstall Ubuntu?
View 1 Replies View RelatedI had dual boot PC (openSuse 11.3 / Windows XP). Then I had to reinstall Windows XP, so I lost dual boot capability. (No Grub boot options screen, directly Windows boot.)How can I reinstall Grub (only Grub)?I tried by booting with the openSuse installation DVD, but no repair option appears as in older versions.
View 5 Replies View RelatedMy laptop is running Fedora 12. I installed BackTrack 4 onto an external USB hard drive using a LiveCD. Now when I boot my laptop. I get this: GRUB Loading stage1.5. GRUB loading, wait Error 21. I never touched anything with my internal drive. When I was reviewing what partitions the installer was going to format, the swap partition for my internal drive (Fedora) was set to be formatted even though I did not specify this. Fedora never used to show GRUB loading at all. Screen was blank until Fedora starting loading. Maybe this means that this is a copy of GRUB from my BackTrack disc? I ran 'fdisk' to look for anything suspicious and under /dev/sda1 (internal drive, boot partition) it says "Partition 1 does not end on cylinder boundary."
View 9 Replies View RelatedThis post has been updated with new information. First, here's fdisk -l:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]....
First up, assume i know nothing about computers. I have a MBP 5,5, and choosing the logo for windows brings up the grub menu, as does choosing ubuntu's logo. I've read a lot saying i need to install GRUB natively under ubuntu, but I've had no luck doing so. can anyone essentially walk me through this step by step? or offer alternatives?
MBP 5,5
OS X 10.6.4
Win 7
ubuntu 10.04
Last night I installed ubuntu 10.10 unto a macbook pro 5,5 following the instruction from the MactelSupportTeamAppleIntelInstallation however I made a mistake during the installation process. I forgot to go into advance settings and choose to install the bootloader on /dev/sda3. I'm not exactly sure why this step was needed since everything was working fine anyways, but I was wondering how can I remove the bootloader from /dev/sda and install it on /dev/sda3 without breaking anything. [URL]...
View 2 Replies View RelatedI am persuaded now (too late) that I need to invest in a robust backup scheme.
I had refit dual-booting snow leopard and ubuntu 10.10.
I tried to upgrade to 11.04 and it got stuck on bootup after the upgrade.
So I went into disk utility and deleted what I thought were all partitions except the mac one. I rebooted, and now I get the grub no partition error.
Did I delete my mac partition? I don't think that I did. How do I boot back into mac os x? Using the option key on bootup no longer shows a mac disk and inserting the mac os x system cd doesn't show any options either.
I've been running Ubuntu for some time on an old MacBook 3,1. It has been a happy OSX / 10.04 dual boot. I'm attempting a triple boot: OSX / Ubuntu 10.04 / Ubuntu 10.10. The partition scheme is similar to this, I've lost exact partition sizes:
Code:
1 20.5kB 210MB 210MB fat32 EFI System Partition boot
2 210MB 32.9GB 32.7GB hfs+ Untitled
3 33.1GB 33.2GB 105MB ext2 Untitled
4 33.2GB 33.9GB 734MB linux-swap(v1) Untitled
[Code]...
I started my laptop this morning with no problems. It was doing a file system check which I quit (pressing C) after about 30%. The only problem I had was wired networking didn't seem to be working (though wireless was). No problem: this happens sometimes and a restart fixes it. After restart: the GRUB screen hangs at "Loading stage 1.5" for ages before issuing Error 25. Try a restart. Same thing. And again. I'm on Lucid 10.4, no other OS installed, Toshiba laptop that up to now has had no problems with the last two versions of Ubuntu.
View 1 Replies View RelatedI installed opensuse 11.2 64bit on my external hard drive with the idea that this way the two OS would be completely seperate and I could just use suse when I felt like it. Everything boots fine for both OS when the hard driv is plugged in but when it is unplugged I can't get past a boot screen which says: Grub loading stage 1.5 Error 21 I have seen on another forum a fix using the windows install disk but I no longer have this. Is there some other fix I can use to make my laptop portable again.
View 9 Replies View RelatedEvery time I start my computer, I get a message saying:
I press any key, and the start-up completes without further problems. The first line on the screen after I press any key is
I`ve looked on the web, and grub stage 1.5 seems to be where the size of the hard drive is identified. Problems often seem to be linked to partitioning. My hard drive has (since new) a 115GB and a 5GB partition.
When I try to access the 5GB partition, I get the following error message:
Linux 2.6.34-12-desktop i686
System: openSUSE 11.3 (i586)
KDE: 4.4.4 (KDE 4.4.4) "release 2"
I'm using Arch with the latest updates and I'm pretty sure this is a software problem.Basically about one out of five times my system freezes at "Grub Loading Stage 2". Whenever this happens, I usually just reset my box with the reset button and it will boot up just fine the next time.I originally put it down to being a defect in my hard drive which is probably three years old now at least. However, last week I bought a brand new 1.5TB drive. I removed my old drive and am using only my new one. Same problem.I Googled for this problem and found a bunch of posts with the same issue as I'm having, yet all of those issues are with people that dual boot with Windows. I don't. I only have Arch and no other OS on my system. I then tried reinstalling Grub and that doesn't seem to have solved it.I'm hoping someone can help me out with this. I hope it's not a hardware problem. Any help is VERY appreciated as this problem makes me worry that something worse is going on.
View 3 Replies View RelatedI'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
Dual-Boot: Mac OSX and Ubuntu
Want to dual boot 10.04LTS and OS X 10.6.5
But there is no option to install the boot loader (grub) to /dev/sda3 as per the following
using Bootcamp
https://help.ubuntu.com/community/Ma...elInstallation
A few days ago I installed openSUSE 11.4 on a 1TB HP external hard drive. I have some very important files for school and personal work on my main hard drive, running windows 7, so I made sure the installation only affected my external hard drive. With the external hard drive plugged in it boots just fine but when it is un-plugged it says Grub loading stage 1.5. Error 21 and it won't do anything. This kind of pisses me off because there were no warnings and nothing was supposed to happen to my main hard drive. But this has already happened and now I want to know if there is any way I could fix it so I can boot windows 7 normally and still boot openSUSE with the external hard drive plugged in.
View 6 Replies View RelatedI previously had Ubuntu installed on my MBR. I deleted that partition (32 GB), resized my Mac partition back up to (250 GB), and then reduced it to 200 GB and created a new one with 50 GB via BootCamp to install Windows 7 from a DVD that I burnt (I got a Windows executable from MSDNAA that I used with Wine to obtain the ISO image. Insert rant about having to download Windows with a Windows executable here.).
I've tried burning two different DVDs. I used Burn on my Mac to burn a data DVD+R with the HFS+ and Joliet filesystems (I think) and then tried again with the ISO9660 and UDF filesystems. The latter has not shown any signs of working besides mounting on OS X. The first DVD would not boot whenever I held 'C' down at time of boot. So I went into BootCamp and clicked "Start Installation". It restarted my computer and this is where the real confusion comes up. I think that it tried booting via the empty partition. The reason I say this is that there are remnants of GRUB and when I boot, I get a screen that says this: error: unknown filesystemrub rescue>
i have ubuntu 10.04 64 bit installed and configured and working sweet. I have reinstalled windows 7 and now i can't boot ubuntu i've tried easybcd to add ubuntu to win boot loader which failed and tried to follow the instructions to reinstall grub through a live cd which i am in at the moment. i go to a terminal and type sudo grub and it brings up the grub prompt. i have mounted all discs and entered the command find /boot/grub/stage1 and it keeps spitting this back at me Error 15: File not found
my hd is a 80gb with partions like this
/dev/sda1 105mb ntfs system reserved
/dev/sda2 45gb ntfs win 7 home premium 64 bit
/dev/sda3 34gb ext4 ubuntu 10.04 64 bit
/dev/sda4 1.5gb linux swap
This seems to be a variant of a problem many people have had, but after several hours trawling through various forums, I haven't seen a reliable match for my situation.In brief:Adding a third boot partition (of Ubuntu) to my existing dual boot of OSX 10.6 and Windows 7 seems to have crippled the Windows boot from working, because Grub apparently takes over the process. Yet Grub does *not* appear to be on the Windows partition.
More verbose:I have an older MacBook Pro (3.1, running Snow Leopard) that I recently refitted with a new 240GB SSD HD. With the extra space (it was previously only 120GB) I decided to add a dual boot with Windows 7 using bootcamp. This all went swimmingly well.Encouraged, I decided to follow this Lifehacker article's suggestion and triple-boot the machine with Ubuntu (I'd never used Linux before):So I now have the nice rEFIt boot partition selection screen, and, indeed, I'm up and running in Ubuntu, and enjoying it.
Only one problem: I can't get into Windows any more. If I try to go in through rEFIt *or* by holding down OPT at startup and selecting the windows partition directly, the result is the same: I get thrown into Grub's selector, and selecting the Windows partition from there leads to an error message and a dead end.Having read through numerous postings, I get the impression that Grub is doing something or living somewhere that it ought not to be, but in most cases I've seen, people had accidentally installed Grub onto the Windows partition (or indeed onto EVERY partition). So far as I can tell, this isn't the case with me. Here's my boot summary:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I have a Mac Book with Ubuntu installed (no partitions). Do you know how to substitute Ubuntu with Leopard/Snow Leopard? My problem is that the OSX installation CD does not see my hard disk
View 4 Replies View Relatedmy steps
0=I had fedora 11 + win 7
1= win 7 get slow and sucks i formatted it and install windows xp
2= reinstall Grub in Grub part /dev/sda2
[code]...
During my Ubuntu install I screwed up Leopard 10.5 and don't have original install disk. I have downloaded 10.5 via a torrent via Ubuntu on my external hardrive and it is too large, my G5 doesn't support dual layer to burn install DVD. I thought I found a Ubuntu link that would help me install this OSX.dmg from my external firewire drive but i can't find it again.Anyone recognize this that could provide a link?
View 1 Replies View RelatedI have ubuntu 10.10 running on my HP dv5 pavilion laptop So today i tried to reinstall grub on my pc .. i removed grub-pc and grub-common using synaptic then booted up with a live cd of ubuntu 10.04 i then mounted sda11 to mnt using sudo mount /dev/sda11 /mnt sda11 being my ubuntu directory containing the /boot then i installed grub to it using sudo grub-install --root-directory=/mnt /dev/sda it reported as installation finished.No error reported then i unmounted /mnt and checked for /boot/grub/grub.cfg seems like the file is missing so are the files in /etc/grub.d/ reinstall my grub back
View 9 Replies View Related