I'm running Ubuntu 9.10 on an HP Desktop with an ATI Radeon 2600 pci card that has four outputs. I want to run the same 3-monitor array that I had in windows. Is it possible to get this thing running and configured right in Linux? At the moment I can only get it to send a signal to 2 monitors. I installed the drivers step by step from the manufacturer, but I can't seem to get a signal to all 3 monitors.
View 6 Repliesrecently I have downloaded opensuse 11.3.tried to install latest version of graphic driver.but after uncompressing it says:
which: no XFree86 in (/home/muhammad/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.34-12-desktop:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.fvzKbN
I have installed kernel sources,xorg x11 headers and gcc.
I didn't found working driver for my card yet. Using OpenSUSE 11.2 KDE, Motherboard MSI 648F Neo, Pentium4 2.8GHz, 2 x 1GB DDR.I've found, that my card should be supported according to HCL/ATI Video Cards - openSUSEInstallation following ATI drivers - openSUSE Easy Way didn't work because of chcecksum difference (x11-video-fglrxG02), Repositary Way too. Hard Way Installation resulted to disability of Graphic Environment and I wasn't able to fix that (finally, I somehow get running KDE, but Kwin always broke down, so system was unuseful).
I also tried packages found by Software search (Software.openSUSE.org), so package 'xorg-x11-driver-video-radeonhd' but nothing works for me, some of them provide result of "glxingo | grep direct" -> "No", some of them "Yes", but in this case I wasn't able to run "glxgears", because of error "drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info." Desktop Effects I cannot run anyway. how to get graphic acceleration working. It will be great if is here someone with exactly same, or similar card, he could write a step-by-step guide to do that. Starting with fresh installation of OpenSUSE (not corrupted by my previous tries) is not problem.
I recently upgraded from 9.10 to 10.04 and was having trouble getting 3D graphics enabled on my ATI card. I am running on an MacPro3,1I read through this guide as I was having errors regarding fglrx so I uninstalled it and as instructed issued the following:
Code:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
[code]...
I am looking to build a new desktop. What is the lowest end video card that will fits the following:
Supports 2 monitors at 1920x1200 or 1600x1200
Works with Linux.
3d performance isn't much of an issue, since I don't play computer games. I use the computer mostly for programming, which is why I like having the large resolution, so I don't have to scroll around so much.
I just got another video card from a friend and I wanted to see if I could get it to display a second screen. I have two monitors, both VGA CRT monitors. The first video card is a Geforce 8400gs pci-e and the card given to me is a Geforce FX 5500 pci. I could get them both to work separately under low graphics mode when I go into the bios and switch the video adapter from pci-e to pci, but not together. What to do to make both cards work in harmony?
View 4 Replies View Relatedafter I installed the ATI Radeon 3400 series video card in my machine, the Xserver cant start! after it loads, it takes me to the init 3. When I tried startx, the screens either go blank or doesnt let me. I tried to install everything following this website:
[URL]
I wanted dual monitors but now I cant even get one. The xwindows doesnt appear. Things I tried:
1. Deleted the xorg.conf and reconfigured (didnt work).
2. sax2 -r -m 0=versa (didnt work)
3. reconfigured the ATI radeon driver from init 3 (didnt work)
4. copy and paste the oold version of xorg.conf (didnt work)
5. tried to run set apt or dpkg-reconfigure command (commands not found)
6. tried xconfig and prompt the best I coudl (didnt work).
7. aticonfig commands (As shown in website) (also didnt work)
I have the live CD to run it from there but I dont know what to do once I get to the terminal. Is there any way I can revert to previous configuration since the ATI driver gives me some problems? Like a restore function in windows? how or what files I should change for the X-server to run properly (is there any other file than xorg.conf?....)
The monitors I have:
2009W Dell Monitor
1398 Dell Monitor (I wan to get the dual exntended monitor but it seems to gave me only the mirror image, thats why I tried to reconfigure the video card)
VideoCard:
ATI HD Radeon Mobile 3400 Series
Computer:
Dell Optiplex 680 (i believe) with SUSE 11.26 and x86_64 bit
I have installed a 9200 Radeon (the card says 9250 on it, but computer reads as 9200) on a AMD Sempron 2500+ 64 bit,Ubuntu 10.04 Gnome 2.30.2, Kernel Linux 2.6.32-26; Samsung VGA 941BW monitor.
A friend told me if I added more RAM (512mb), the card would run properly & the graphics would be stellar.
He also told me the drivers were installed.
When I did this & started the computer, before I got to my login, a box appeared, telling me my graphics were running in "Low Mode", & do I want to configure them. When I said "Yes", it told me to restart. When I did, nothing happened & the video card is still running on "low". I checked the fglrx info, and was told "command not found".
There is running gOS on my computer (Ubuntu baset OS) and I want to install the Video Card driver for ATI RADEON 9250.
Ifound the driver in the official site =>> http://ati.amd.com/support/drivers/l...n-prer200.html
And I also saw the instructions of installation =>> [url]
But I cant instal the driver. When I write the comand sh ./ati-driver-installer-8.28.8.run (of course the file is in the home directory)the terminal window writes:
PHP Code:
And then written in the instruction: The ATI Proprietary Linux Driver Setup dialog box is displayed but no window or dialog box is displayd.
Using this video card but unable to find the setting for it in the options. I am using a generic VGA setting right now and it's getting less than optimum resolution. What's the proper setting for this card?
This is RedHat Enterprise edition.
The machine is Dell OptiPlex 745
The monitor is Dell 2005FPW (Digital)
The graphics is:
ATI Radeon X1300 Professional
I'm attempting to get Debian (Squeeze, latest net-install CD) working on a Power Mac G5 Quad with a Radeon X1900 Mac edition video card (PCI-Express.) The installer acted a bit weird right from the start, telling me that the step "Install the system" failed (with nothing in the way of useful error information,) but I got the base system installed at least. It booted fine to framebuffer console, so I set about installing GNOME on it. apt finished with nary a complaint, but when I rebooted, I found that when it's ready to launch into X, it chokes up and just sits there with a blank screen and a cursor. (Weirdly, though, the screen itself flickers on and off at a high rate, faster than the actual cursor blink.)
Framebuffer console still works, at least, so I was able to boot into single-user mode and do some investigating in my own limited capacity for this stuff (by which I mean "Google error messages and see what specifics are requested.") lspci -k shows the video card properly with the manufacturer and product name, so it is recognizing it, at least. When I try Xorg -configure, though (Xorg 1.7.7, it says,) it aborts with a "No DRICreatePCIBusID symbol" message. Checking dmesg gives me a "process Xorg mapped non-existing PCI legacy memory" message, followed by an "invalid ROM contents" message underneath.
I'm not sure what all to make of this. I've found a thread about problems getting the same basic setup (G5 Quad, X1900, Debian) to work, but it's a couple years old and the symptoms are different. There's some discussion there about the radeon/radeonhd driver looking for Atom BIOS information on non-Atom BIOS cards, which would explain the "invalid ROM contents" message, but on the other hand, if lspci recognizes the card properly, would that be the problem? I don't know. Obviously it's playing nicely enough to run framebuffer console output properly, but beyond that I have no idea. I'd really like to get this working - it'd really improve things over the GeForce 6600 it came with...
a powermac G4 with radeon 9000 RV250 in ubuntu 10.04 ppc i just want the graphic work better
View 9 Replies View RelatedI recently bought 1GB video card of 'xfx radeon hd 5450'. It came with cd for drivers of windows.
I installed fglrx. Still in ubuntu 10.10 (lucid) I ran: lspci -v | grep -i prefetchable
which shows 256M which is video memory of my ASUS motherboard.
I've loaded Fedora and must say what a nice OS! But I'm having some issues getting the video working correctly so let me jump right into the issue. The video is very garbled and hard to read. can't seem to find a way to correct what would appear to be a driver issue. Here are a list of things tried:
- display works fine with Ubuntu
- display is clear but is chopped off when using an external monitor from onboard vga slot
The video card is an ATI radeon and the linux drivers from the ATI site don't work with the new images that are out yet.
Will Fedora 15 support this video card on laptops?
View 2 Replies View RelatedI'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
View 4 Replies View RelatedI'm a new Mandriva user,and have no clue about Linux system,but to be honest I don't want to use Windows product anymore. So I got the Mandriva 1 Spring Gnome,and installed it on my DELL Optiplex Desktop,works fine and very fast,therefore I decided to do the same with my Studio XPS 1640,but after I got a dark screen,so I used an external display(My TV) then realized that it doesn't support the video card on it ( ATI Radeon HD4670 ),and I don't know what to do.
View 1 Replies View RelatedI have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
I been searching for months on how to get the s-video to work on my pci VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] card. I found a site with instructions.
This is how I got it to work.
I install Debian 5.0 Lenny Desktop
added the Driver "radeon" to my /etc/X11/xorg.conf file
This work and I was able to use my tv as a monitor however when I try to play a video file from totem or vlc all I could get was audio with no video; These files work and played fine in the CRT monitor.
The default install of F15 is not detecting my multiple monitor setup properly.I have two dell 17" monitors running on an ATI hd4650. In system settings the display tool does not detect the second monitor. The monitor is working and on but just shows a mirror of the main display.I didn't see an xorg.conf anywhere to try to fiddle with that... so I don't know what to do. Hitting the Detect Displays button does nothing but cause the 2nd display to flicker for a minute.
View 1 Replies View RelatedAfter working on trying to get my 3 monitors to work with Ubuntu 10.4 and my ATI Radeon HD3200 (IGP) and HD4850 cards, I just had to share the xorg.conf. I am using the default open source drivers that came with 10.4 and I kept KMS enabled (it wouldn't work without it).
Here is my conf:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "4850-2-Screen"
Screen 1 "4850-1-Screen" RightOf "4850-2-Screen"
Screen 2 "3200-Screen" RightOf "4850-1-Screen"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "on"
#OPtion "Clone" "off"
EndSection .....
I have dualhead configuration - ATI Radeon 7000 with 2 attached VGA monitors.But by booting is one of them switched off:- without kernel param. - nomodeset (added to GRUB), the monitor is switched off just before X start- with nomodeset - is switchet off by X start.In X: xrandr reports only 1 attached monitor (second port is reported as "disconnected") - the same info is in /var/log/Xorg.0.log.I have also try to use my elsewhere working predefined configuration in xorg.conf, but also without effect. The second monitor stays off :On every other OS I have ever tried: Ubuntu 8.04/8.10/9.04, Mandriva 2008/2009.1, Knoppix, SuSE 10.3/11.1, Windows XP, ....I had not this problem.Also - what is wrong in Fedora ? Why do switch the monitor off ? Why reports, that the monitor is disconnected - when it is not true ?
View 9 Replies View RelatedCan anyone help with me configure my dual-screen monitors for rotation? I have xrandr 1.1. Have tried various approaches, nothing takes. I can't even get the xrandr options to show up in KDE's Display control panel.
My lspci output: 03:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] My current xorg.conf (works, minus screen rotation): # Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
[Code]...
I was just wondering if is an easy way to configure three monitors run across two video cards (Nvidia Leadtek GTS250 PCI-E 2.0 1G 2DVI ) 2 on one, 1 on the other under the one xserver? I tried to get it going using the Nvidia driver package with no luck - 2 monitors seemed to be simple to configure using Twinview setting on a single xserver (my current settings) and I was hoping their may be a simple extension for three and if so is there an easy way to go about this? (I am new to Ubuntu).
[Code]...
I've been using linux for roughly 12 years now but I've always avoided linux on the desktop since touching X back in the day was quite a hassle. I recently decided that rather than keeping my windows desktop full of 15 PuTTY instances, I should rock the *nix desktop.
I started by installing Ubuntu 10.10 Desktop. It detected my two monitors handing off a pci express card just fine. I decided to install the ATI drivers when it prompted me - the proprietary drivers would let me select to use the monitors separately, but would always just default back to mirroring the screens. I was unable to get it to stop that, so I had to go back to the open source drivers. Which is fine, I don't really need the 3d accel. Roll forward a week, I ordered another video card to add another screen. I purchased another ATI card, since word on the street is that same-vendor chipsets play best together. This one had to be PCI, if this matters.
dmesg reports the new card is fine and happy, but the Monitors GUI thing doesn't detect any monitors off the new card, or report anything about it. So: what should I do to make the second video card get noticed?[URL]...
Been looking around and have been trying for 4 days to get my 3 monitors to work with my 2 video cards , When the system starts up I get the bootup screens on the 3rd monitor , then the login box shows up on the 1st monitor and when logging out I see the shutdown screen on the 3rd monitor again , so I know ubuntu see's it , but not sure how to include it in the regular desktop . It's just a lighted very dark red and I can't move my mouse or any windows over to it , here is my xorg.conf that I modified and tried to get it to work with :
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@palmer) Mon Oct 4 16:01:38 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
[Code]...
My tech level is intermediate (I know my way around basic bash and such) I'm a somewhat long time ubuntu user (since 6.06) and I've run into a problem I can't really get around.
I have an intel on-board video card as well as an nvidia geforce 8400. I'm using the nvidia (binary) drivers. I'd like to be able to use all three monitors (2 connected to the geforce, 1 to the onboard). I'd like to just say this worked flawlessly on windows so it is not a bios/hardware issue. I'm pretty clueless on how to get this done...
Also, I got a new EMU 1212m sound card and I'd like to know if there is a way other than compiling alsa from source in order to get this sound card working, this is the only option I found when searching the forums.
I'm trying to get ubuntu working w/ 3 monitors. I have been given 2 video cards
lspci | grep VGA
20:01:00.0 VGA compatible controller: ATI Technologies Inc RV620 LE [Radeon HD 3450]
25:05:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1)
I have had it working w/ two monitors plugged into the ATI correctly. and the nVidia monitor blank. Now I have the nVidia monitor working and one monitor from the ATI working, but I can't seem to get the last monitor to show anything. It does show the boot screen and works up until the point you are presented w/ the login screen for ubuntu, then it disappears and the nVidia monitor turns on. Might I have something wrong w/ my xorg.conf or do I need to do something more to get this to work? Currently I'm seeing this error in my Xorg.0.log file, but I'm not sure where to go from here:
[ 24.746] (EE) RADEON(2): reusing fd for second head
/etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.29 (buildmeister@swio-display-x86-rhel47-02.nvid
[code]....
I inserted another graphics card to my computer to use 3 monitors. The card appears in lspci but I can't access it in gnome.
What do I have to do to set this up.
Here is the output of my xorg.log: [URL].....
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 XT/X1650 GTO]
I'd be grateful for any suggestions to get a second TV/Monitor to work in addition to the desktop monitor for a PC which runs Lenny. The first monitor is a small TFTLCD 15". Works perfectly with a GEForce FX 5200 nvidia graphic card and uses the 173.14.09 driver. Having obtained an SVGA cable, I connected the card to a rather larger 32" LCD Panasonic TX-L32S10B TV to enable some armchair viewing of internet etc for my parents. The Panasonic TV or monitor shows all the boot messages but the graphical server fails to start. I know that both screens work, either alternatively or simultaneously, having tested with a Puppy live CD.
However, running
nvidia-xconfig --twinview results in an incorrect screen resolution for the 15" TFT Monitor; Gnome Screen Resolution Preferences gives a rather surprising fixed setting of 2048x786/50Hz when the maximum should be 1024x768. The resulting xorg.conf file is:
cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildd@ninsei) Fri Sep 5 22:23:08 UTC 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
[Code]...