I am having a frequent (once every 3-4 minute) random momentary black screen and it recovers after 2-3 seconds. I have notice this since the early Fedora 12, but the frequency increases lately.I have turned off the KMS, KDE power management, and screen saver, but it did not help. I have radeon 3450.
View 4 RepliesI can't get kde to start. I boot through the blue ubuntu 10.04 splash screen normally, so my video card is putting out something, but then i drop into a tty terminal. I log on ok, but when i do startkde from the command line i get a message saying can't connect to xserver, when i do startx, i get these errors: (i can't stuff them here cuz i don't have a mouse or a cut and paste ability)EE) NVIDIA:
Failed to load the NVIDIA kernel module.
.
.
EE) No drivers available.
But here's the backstory: I have a ASUS M3N78 PRO MB with an on board Nvidia GeForce 8300 graphics capability. It was intermittently failing, so i disconnected it put in an ATI RADEON PowerColor HD 3450 graphics card, and then my problems started. Seems to me I must have the Nvidia driver since i can boot to KDE fine using the Nvidia onboard analog output (at least some of the time).
Supposedly Lucid Lynx has the ATI drivers for my card preinstalled, plus the new card does drive the splash screen. Is there some clash in some script between the Nvidia on the MB and my ATI Card? I upgraded to GRUB2, reconfigured xserver-xorg, tried to run jockey from the command line and failed, tried sudo nvidia-xconfig. Nothing changed anything.
if I reboot the computer, I get the grub menu and am able to choose between Win7 and Fc15. A couple of times during installation the screen flashed black and diplayed a message for a brief second. I can't read that fast but it says something like "DRM nouveau- unknown or unsupported chipset" and one more line that I can't catch. When this happens, I see the pre-login loading screen, the one that shows an icon of a hard drive, network, and so on as each resource is secured. I can log back in, but this starts a new session- it doesn't remember what I was doing. I had to redo the install and setup several times because of this.
I can log in and so on normally, but the black screen and message will appear at random, forcing me to start all over, which is really frustrating. what's going on? Is it the video card? How do I install a driver for it? Also, the hard drive in question has been through a lot. could it have a bad sector or something? Windows didn't even want to "see" it, that's why Fedora is installed on there.
I`m using a N5010 dell laptop with an Ati Radeon mobility 5650, I tried to install the ati drivers on F14 which caused a black login screen and there is no way to open the console and do anything. On top of that I`m using Ubuntus Grub2 so I`m practically stuck.
View 7 Replies View RelatedOnce I installed it I've been having a problem where the screen flashes black for a split second. i looked up the problem and found this:I navigated to the directory it said, but I don't have an "options" file. What should I do? Are there any other fixes for this? It's quite an irritating problem.
View 1 Replies View Relatedopensuse v11.3
linux 2.6.34.7-0.5-desktop x86_64
ati radeon hd3200 (builtin to mb)
fglrx driver - distribution-specific build
At random intervals the video output is turned off for 2 - 3 seconds giving a black screen. (I suspect the 2 - 3 second blank time is how long it takes the monitor to recover after a loss of input signal.) The interval between events can vary from 1 minute to an hour to more than a week, and recently more than a month. Sometimes I get several per hour; other times not for two weeks. Hmm, there was a kernel update in the last week or so.At one time the cause was pointed at a USB driver problem since a number of USB log entries occurred at the same time as the screen blanking. That is not the case here;here is nothing in </var/log/messages> (or the dmesg output) that is anywhere near when a screen event happens.
I installed Ubuntu 10.04 using Wubi. Everything works well, but randomly while I am working my screen will go black and say out of range or no signal. My monitor is a Planar, I have resolution and refresh rate set at factory specs and most of the time it is clear and working well. It seems to be completely random, sometimes it happens while surfing the web, other times I am using gimp, and sometimes I am not near the PC at all. I assume the problem is also the reason I can not use Compiz as well. (Graphics card is a intel 845).
View 6 Replies View Related(Using Ver. 10.04-lucid lynx) This is because, at random, Gnome environment will have some kind of problem, leaving me with a black screen, like the terminal but not it, where I can enter my password and that's just about all. There seems to be no way to enter the graphical linux environment. I was forced to wipe the hard drive clean twice because of this and both times I reinstalled lucid lynx.
View 2 Replies View RelatedI'm on Ubuntu 11.04 and I have this annoying issue. it does happen very often, but enough to be a problem (atleast once a day or more).While I'm browsing the web (not really doing much of anything else) the screen goes black with some text. I don't get enough time to read the text and I'm returned to the login screen. I'm completely logged off, my session isn't still there when I log back in
View 3 Replies View RelatedI'm trying to get a brand new Radeon HD 6670 running, using kernel 2.6.39 (CONFIG_DRM_RADEON_KMS=y, CONFIG_DRM_RADEON=y) and gentoo.First off a I tried to run it out of the box, but while booting the screen got black after:
Code:
Loading Turks MICROCODE
Refined TSC clocksource calibration: 2812.324 MHZ
[code]...
Got a new Lenovo T500, slapped 9.10 on it. Set of programmes is exactly as on my previous IBM T42, but every so often I get a random crash. No errors, just a complete freeze with a "underscore" cursor in the top-left of the screen.I think / suspect it may have something to do with Transmission running, or perhaps the recent kernel update to 2.6.31-17.Anyone else had anything similar? Maybe on a T400 or R60 / R61 / T60 / T61?
View 9 Replies View RelatedI'm a little new to ubuntu. I installed a video driver and after restarting I got as far as the login screen where I saw that the driver did not work: screen is mostly black with random bars of color. I was only able to restart in recovery mode mode. I tried the fix graphics option, which did not work and also some commands that I've seen posted in other threads. So far, still cannot delete the problematic driver or boot up normally successfully.
View 1 Replies View RelatedI have ubuntu on my desktop - works great. The problem is I am trying to install it on my laptop. I have the image burned, and it's booting off my cd rom just fine. The problem comes after that. It goes to the ubuntu loading screen for a pretty long time, then after that the screen scrambles in random black and white box type things, at which point I get no response unless I hit the power button at which point a linux screen pops up and tells me it's waiting for programs to close, then boots down.
View 5 Replies View RelatedI am running on ubuntu 10.04 and using the latest nvidia driver. What I experience is a random black screen, my monitor goes dead and won't turn back on till I hardboot. I had this issue on windows and solved it by downloading rivatuner and telling it to force my 9700m into staying in 3d performance mode at all times. I know it has nothing to do with temps or anything like that. All I need to know is how I can duplicate what I did with rivatuner on windows
View 1 Replies View RelatedThe screen goes black while "waiting to populate /dev/"and only by adding acpi=off can I boot into my system, and then I see that I get an error message during boot when "populating /dev/ " that says"fatal error during GPU init", even after I've installed the firmware-linux-nonfree.deb, which is the one for the R300 family, which I'm guessing is the right one, since lspci tells me I have:Radeon IGP 330M/340M/350MI've read the wiki[URL]
View 5 Replies View RelatedMy KT4AV-based PC has burned up two GEForce 6200 cards, so I decided to try an AGP bus Radeon HD 3650.At the same time as the nVidia card went "black screen" (no video at all, not even text) my CMOS battery died.I put in a new CMOS battery and fixed up the CMOS settings as well as I can.I put in an old Trident TVGA96PCI cardnd got as far as terminal mode, but even with the xserver-xorg-video-tridentdriver already n the system, I couldn't get the display manager to run. I gave up on the Trident card becauseold and bought a new Radeon HD 3650 card and changed the display bus from PCI toAGP in the CMOS settings.
The Radeon card now also gets me only to terminal mode.tried coaxing the system by renaming xorg.conf, but that didn't help - rebooting still gets me nowhere,no new xorg.conf file. The renamed one is still configured for the nVidia card. The xserver-xorg-video-radeon driveris also present, as "sudo apt-get install xserver-xorg-video-radeon" tells me it's already the latest version.I'm presently stuck without direct network support, as the ethernet connection hangs the computer during rebootthe message, "ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready." If I unplug the ethernet cablefor starting successfully, when I plug it back in while I'm at the command prompt, I get a message to the effectthat eth0 up and running,"ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready" messageappears again and the sytem again freezes.I have successfully pinged this PC from another on the network, but not while it's hung up at the above-quotedmessage. In that case, it's "unavailable."How do I purge the system of the nVidia stuff and replace it with an approporiate Radeon driver ?
I recently upgraded from 9.10 to 10.04 and was having trouble getting 3D graphics enabled on my ATI card. I am running on an MacPro3,1I read through this guide as I was having errors regarding fglrx so I uninstalled it and as instructed issued the following:
Code:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
[code]...
i have an asus radeon x1650xt vga, i can use the latest radeon driver in ubuntu 10.04 and also in the newest fedora but in slackware 13.1 i get the same black screen i used to get with older ubuntu, fedora and other distros. i can only use slackware with the vesa driver, what could be the problem...here is my /var/log/Xorg.0.log
Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
[code]...
I'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:
* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen
[code]...
HP Compaq 6820s: During the installation of F14 I noticed that the system freezes for a while every few seconds. The installed and rebooted laptop behaves the same way. Disturbing repeated messages in var/log/messages:
Code:
Nov 3 18:20:22 localhost kernel: [ 512.589815] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
Nov 3 18:20:34 localhost kernel: [ 524.463172] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[Code].....
I get a black screen whether I use Ubuntu's driver or ATI's driver, but when I use the default it works fine without an desktop effects. Catalyst installed without any errors.
View 8 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedopenSUSE 11.3 KDE There is a frequent flicker on my screen. Some application OR notification just pops and disappears( giving an impression of a flicker ). How do i find out which application OR notification is it.
View 9 Replies View RelatedRecently I've been having an issue where every now and then, all of a sudden fedora logs me out and takes me to the login screen.
All my unsaved work is lost and I have to log back in again.
Is there any way to diagnose this problem and figure out how to solve it?
I downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
This problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.
When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:
[Code]....
I was using Fedora 12 before and using the RPMFusion nVidia proprietery driver and everything was fine. On fedora 13 Im trying to use nouveau with the 3d support and for some reason i get little pink pixels appearing over my screen in ramdom places on ramdom. please see screen shot below. I used to get this on fedora 12 also before using the nvidia driver, any clues how to fix this?
also, I have two monitors (well one is a tv) any how most of the time i dont use the tv, so in the settings i switch it off, but for some reason when i log out the default settings are to use both screens and have the login prompt on the wrong monitor, how do i set my monitor settings to be so in all situations?
I got Ubuntu 11.04 on my USB and I booted from it for the first time, worked fine. I went back and it started to flicker and freeze then come back and the rez was stuffed.
View 8 Replies View RelatedWhen I put my laptop, a Presario X1000 to sleep that uses Radeon Mobility M7 LW [Radeon Mobility 7500], when it comes back up, I get just black and white "nosie" on the screen.
Even after I do cntr+alt+F1 and then cntrl+alt+F7 it still doesn't appear to restore the regular screen.
Every since updating to kde 4.3, I have been experiencing frequent X crashes (1-2 times a day) whenever compositing is turned on (nvidia card). I was hoping that kde 4.3.1 would fix the issue for me, but no luck. So, I'd like to figure out what the nature of the problem is so that I can report it to the appropriate (ahem) authorities, but am not exactly sure how to dig up any useful information. The Xorg log didn't *seem* to have anything particularly informative to say about it (just a few lines about nvidia_drv.so).
View 5 Replies View Related