OpenSUSE Hardware :: Can't Install ATI Radeon HD 2600 Driver On 11.3 X86
Jul 27, 2010
recently I have downloaded opensuse 11.3.tried to install latest version of graphic driver.but after uncompressing it says:
which: no XFree86 in (/home/muhammad/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.34-12-desktop:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.fvzKbN
I have installed kernel sources,xorg x11 headers and gcc.
View 9 Replies
ADVERTISEMENT
Feb 20, 2010
I didn't found working driver for my card yet. Using OpenSUSE 11.2 KDE, Motherboard MSI 648F Neo, Pentium4 2.8GHz, 2 x 1GB DDR.I've found, that my card should be supported according to HCL/ATI Video Cards - openSUSEInstallation following ATI drivers - openSUSE Easy Way didn't work because of chcecksum difference (x11-video-fglrxG02), Repositary Way too. Hard Way Installation resulted to disability of Graphic Environment and I wasn't able to fix that (finally, I somehow get running KDE, but Kwin always broke down, so system was unuseful).
I also tried packages found by Software search (Software.openSUSE.org), so package 'xorg-x11-driver-video-radeonhd' but nothing works for me, some of them provide result of "glxingo | grep direct" -> "No", some of them "Yes", but in this case I wasn't able to run "glxgears", because of error "drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info." Desktop Effects I cannot run anyway. how to get graphic acceleration working. It will be great if is here someone with exactly same, or similar card, he could write a step-by-step guide to do that. Starting with fresh installation of OpenSUSE (not corrupted by my previous tries) is not problem.
View 9 Replies
View Related
Jan 19, 2010
I'm running Ubuntu 9.10 on an HP Desktop with an ATI Radeon 2600 pci card that has four outputs. I want to run the same 3-monitor array that I had in windows. Is it possible to get this thing running and configured right in Linux? At the moment I can only get it to send a signal to 2 monitors. I installed the drivers step by step from the manufacturer, but I can't seem to get a signal to all 3 monitors.
View 6 Replies
View Related
May 2, 2010
I recently upgraded from 9.10 to 10.04 and was having trouble getting 3D graphics enabled on my ATI card. I am running on an MacPro3,1I read through this guide as I was having errors regarding fglrx so I uninstalled it and as instructed issued the following:
Code:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
[code]...
View 9 Replies
View Related
Mar 13, 2010
I tried to install the driver using the easy and hard way, but unfortunately I couldn't install it. When the file manager opens up through terminal after I type in the command using super user mode, I select the downloaded file and it opens it up in kwrite.
View 9 Replies
View Related
Mar 15, 2010
Am trying to install the correct driver for my RV710 Radeon HD4350 grahics card.which version out of these two I should install: * x11-video-fglrxG02 (for HD2000 series and later) * x11-video-fglrxG01 (for Radeon 9500 - X1900)
View 3 Replies
View Related
Aug 4, 2010
I've installed openSUSE 11.3, and I want to have hardware 3D acceleration on my Radeon 5850. Far as I can tell, I don't have any right now (for example, I installed armagetron and it uses software rendering).
I'm a technical enough user, but I'm new to openSUSE and to Linux, and my previous attempt of installing ATI drivers (proprietary ones on Fedora) resulted in the OS being unable to boot. I figure that asking for directions would help make things work out better this time.
View 7 Replies
View Related
Nov 11, 2010
I got 11.3 64-bit installed properly the first time around and working with a Radeon HD4350. I noticed X to be somewhat sluggish on certain apps under KDE so a couple of days ago I tried to install the Catalyst 10.10 tool from the unofficial repository. I didn't like it and uninstalled it.
After some research it turned out that the proper driver is radeon so I uninstalled the radeonhd driver and rebooted hoping Xorg will pick up the radeon driver automatically as it is included with my kernel. Didn't work and I couldn't even get past the failsafe login screen. Regular boot doesn't even get to the login screen. Just hangs and won't respond to any keyboard commands.
I followed the instruction at this SDB Configuring graphics cards in openSUSE 11.3 using the ATI Xorg -configure option from level 3 console and creating a radeon xorg.conf file. It all works to the point of "startx" as regular user which just brings me back to console. Rebooting and does the same things as before under failsafe and regular. Even nomodeset doesn't help. The output error from startx in failsafe console mode is the following:
Code:
Could not open library ksmserver: Cannot load library /usr/lib64/libkdeinit4_ksmserver.so (libatiuki.so.1: cannot open shared object file: no such file or directory) reinstalling is not an option as I have a lot of custom stuff on this box.
View 9 Replies
View Related
Feb 20, 2010
I just downloaded ATI Radeon x700 driver from Quote:[URL]..the file name is
Quote:
ati-driver-installer-9-3-x86.x86_64.run I gave permission as Executing file as program. I run as sudo from terminal but I get this error Quote: Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.31-20-generic; make sure that the version is being correctly set by --iscurrentdistro
View 1 Replies
View Related
Sep 14, 2010
I've always had and used Ubuntu. When I installed and did not like the stability of a certain version, I just reformatted the partition and used LiveCD. OK, on a virgin SATA, 300-gig partition, I installed 10.04 and that took the ATI Radeon 3rd-party graphics driver. No problem. Then, the family wanted 2 languages on the machine. The German keyboard screwed me in terminal and I wiped out Home and all their data. I used Scalpel to image-carve 300-gig onto a 400-gig partition and tried to re-install Ubuntu 10.10.
The ATI's fglrx will not install, that's the error. That same file prevents upgrades of Ubuntu to current status.
is this thread current for my problem with 10.10?
http://ubuntuforums.org/showthread.php?t=651566
Or, do I have that 400-gig with the backup cross-pollinating?
View 2 Replies
View Related
Mar 20, 2010
I just installed OpenSUSE 11.2 x86_64 on a new computer with ATI Radeon HD 5770 graphics card. I have included ati in the update repositories. I saw that x11-video-fglrxG02 and ati-fglrxG02-kmp-desktop are NOT checked, so, I selected both in YAST2, then, OpenSUSE started to download the required files. but, in the middle of downloading, I got a "wrong digest", said that ati-fglrxG02-kmp-desktop has wrong checksum.
View 4 Replies
View Related
Nov 12, 2009
Ati 11.2 repo isn't accessable. Ati catalyst 9.3 dont want to install.
View 9 Replies
View Related
Mar 31, 2010
I just replaced my older monitor with a slightly newer, much nicer Dell 1905FP. I need to have it rotated, but I have no clue how to rotate it. I have seen several xorg.conf modifications that are supposed to work for some of the nvidia drivers, but nothing for the generic radeon driver. The radio buttons in SaX2 are grayed out as well. How do I set up X11 to rotate my display? Preferably without installing the other ATi driver, as I have tried before to switch to that one, and have been unsucessfull.
View 5 Replies
View Related
Jul 30, 2011
I was trying to install this driver of ATI Radeon HD 6370M but i can't do that it works. I googled and visited a lot of pages and I think that I saw a post on this forum talking about a problem like mine. I follow this guide too: [URL] I only want the driver to run gnome3.
/usr/share/ati/fglrx-install.log
Creating symlink /var/lib/dkms/fglrx/8.872/source ->
/usr/src/fglrx-8.872
DKMS: add Completed. Kernel preparation unnecessary for this kernel. Skipping...
[Code]....
View 2 Replies
View Related
May 7, 2010
I got given an old (non brand name) laptop and have installed XP and kubuntu 10.04 on it. The graphics card is Radeon Mobility X1600. Kubuntu gets a very strange problem which does not happen in XP:
Although the installation graphics are OK (sort of, there are some strange font irregularities), when it tries to reboot and fire up the graphics all hell breaks loose, the display is broken in two parts and shifted up with the overflowing region coming up from below. I 'm guessing something in the X server is trying to start and failing because when I try to drop to a text terminal (Ctrl-Alt-F<something or other>) I get pages filling up with error messages.
Unfortunately I can't remember what the messages say and I don't want to try to recreate it in a hurry because after this happens, subsequent reboots start the computer in this split screen mode (weirdly omitting the BIOS POST message) and I 'm not sure how to get it fixed, so far removing the battery, reseting the BIOS to default and letting it cool down seem to work, eventually.
Anyway, I figured since XP seems to be fine, it must be a software problem, although I 'm mystified how it persists and jumps between reboots (the split screen persists even all the way to the BIOS menu). I tried getting the driver from the ATI site code...
Removing temporary directory: fglrx-install.i3fXeb
So, if I can't run the ATI driver, my other option is to run whatever it is that the "Hardware Drivers" KDE menu item runs to get it to sniff out the driver I need. But I can't start an X server so I need to either run whatever it is that runs behind it or get the package I need through apt-get?
View 1 Replies
View Related
Dec 25, 2010
I am new to Ubuntu for the most part, but have done a lot of research on this OS. I just freshly installed version 10.10 32 bit, and the first thing I did was follow this tutorial on installing the drivers for my HIS Radeon HD 6850. I really want to get this drivers working so I can use the 3D effects on this OS.
When I type fglrxinfo I receive:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 14
Current serial number in output stream: 14
When I type aticonfig I get:
aticonfig: No supported adapters detected. The proprietary driver was never installed so I know that driver is not interfering. Originally the aticonfig was not found at all but with a little troubleshooting from the link above It seems to work, but obviously not recognize the card. The card works great on my windows 7 setup. If I can't get this working I may just remove Ubuntu all together, but any help would be amazing!
View 1 Replies
View Related
Feb 25, 2011
Card is the Radeon x300 and in the past in a wubi install I installed the propreitary ATI driver. I'd like to do that with this installation too. I've located the proper driver and tried to run in the terminal.
I get this error:
I've read were I have to uninstall the xorg drivers and make a .deb package but idk how to do that.
View 2 Replies
View Related
May 9, 2010
Is the radeon open source driver 6.13 supporting Xorg 6.5 and Mesa 7.8.1?
View 9 Replies
View Related
Dec 24, 2009
When I first installed openSUSE 11.2, it has no xorg.conf of course, but it detected the subject card and loaded radeon instead of radeonhd. When I used Sax2 to create an xorg.conf for a problem, I noticed that it for the device it created:
[Code]....
When I rebooted with this xorg.conf, lsmod says that it's still radeon that is loaded:
[Code]...
I know that radeonhd does cause some issues with KDE desktop effects, but according to Radeon - openSUSE, the cards above X1900 should be using radeonhd. Instead of either of these, should I try to use the ATI driver fglrx? It seems from my gleaning of forum posts that these have some problems, but I am having some desktop effect issues that maybe would be addressed with that driver.
View 4 Replies
View Related
Aug 23, 2010
I have a problem with free ATI driver with Radeon X850XT 256Mb VRAM. I cant get 3d acceleration in OpenSUSE 11.3.
System : Linux lv426 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 x86_64 x86_64 x86_64 GNU/Linux
Here boot.msg :
<6>[ 5.847172] [drm] Loading R400 Microcode
<6>[ 5.854547] [drm] radeon: ring at 0x00000000B0000000
<3>[ 6.032976] [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)
<3>[ 6.035637] [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
[code]...
View 4 Replies
View Related
Sep 20, 2010
I'm an owner of a ATI mobility radeon X1300 card. Since ATI tagged my card as legacy, i'm stuck with the open source radeon drivers. Wich doesn't bother me, as i know they are slower and openGL support doesn't equal fglrx. What does bother me is that the current version 7.9 dev. claims to have full opengl support up to 2.1. I'm trying to use a extention that is part of the openGL version 1.3 and it's failing. This is a known issue for a long time now and it really disappoints me. "Compressed textures" is what i'm talking about.
Is there any way to make sure that drivers aren't tagged with something they support if they obviously don't? I guess the KDE4 kwin vs drivers thing is the same as i'm trying to say now. Drivers should be documented with what they effectively support and not what they should support. What can I do to make this public to xorg developers? I could only think about posting this here as i have no idea where to put it elsewere. Could someone please point me in the right direction to where i should send this complaint?
View 2 Replies
View Related
Apr 25, 2011
I`m using a N5010 dell laptop with an Ati Radeon mobility 5650, I tried to install the ati drivers on F14 which caused a black login screen and there is no way to open the console and do anything. On top of that I`m using Ubuntus Grub2 so I`m practically stuck.
View 7 Replies
View Related
Mar 23, 2010
I (somewhat foolishly) decided to reformat windows XP and make my foray in the Ubuntu world with Ubuntu 10.04 Lucid just last week. It has treated me fairly well so far and with the help of others posts have been able to get most everything setup to my liking. However...My Problem:I tried to install the ATI drivers for my radeon 9700 using ati-driver-installer-9-3-x86.run. I tried to install it using the Ubuntu/9.04 settings, hoping that I could get it to work like that and I was quite wrong. When I restarted my computer I was started in simple graphics mode, and now I'm trying to set things right again.'ve un-installed the fglrx drivers (I think...) and now I'm stuck. Play On Linux tells me that I need to install 3D acceleration, something I know my graphics card has..
View 1 Replies
View Related
Feb 16, 2011
who has installed these drivers on ubuntu will help me to install ? Because I can not coped...
ati mobility radeon x1400 driver
need me 32bit driver... I found only 64 ...
View 2 Replies
View Related
Mar 13, 2010
I recently bought a HIS HD 4670 IceQ card but can't get it to work in openSUSE 11.2 Under Windows the card works fine, so I assume there is no hardware problem. I tried this card in two computers with different mainboards, but it does not work. Several times I reinstalled openSUSE completely from scratch (tried both 32bit and 64bit versions) but no luck. The problem: Right after the installation it uses the radeonhd driver. This basically works, but without 3D (no Tuxracer...) and even 2D is slow (dragging around windows on the desktop is slow, page scrolling in firefox also).
Then I tried to install the ati proprietary driver, both from rpm (the rpm's from the "official" ati repository have a checksum error, as already mentioned in another thread!), and by downloading the driver from AMD and running the install script. The install script seems to work successfully. The kernel module is compiled and loaded. "aticonfig --initial" makes a rudimentary xorg.conf. But then, when starting X, it does not work:
- on one of the 2 tested systems, even kdm does not start, the screen simply stays black with a frozen cursor top left, even CTRL+ALT+backspace doesn't do anything - on the other system, kdm starts and shows the login screen, but when trying to start KDE kwin crashes, and the windows have no title bar (when I googled for this symptome I found lots of people also having this problem...) - trying to configure the system using sax2 didn't help, even sax2 doesn't display properly I have now spent 4 days trying to get this to work and now I'm really tired of those buggy graphics drivers, be it proprietary or open source...
Can anyone recommend me a graphics card that is approximately as powerful as the radeon 4670 (I bought this card because it is said to be the most economical card (both in price and energy consumption) that allows to play Anno 1404 reasonably well on windows), but is known to work in openSUSE 11.2, even in 3D mode (tuxracer...)?
View 4 Replies
View Related
Apr 26, 2010
This is just to report that I've got 3D support successfully enabled on my Mobility Radeon HD3200 chip with the open source driver on openSUSE 11.2. I did this to replace the proprietary fglrx driver that has already been installed for quite some time on my system.
Uninstalled fglrx, and here we go... Basically what I did was to get the latest X.Org server (1.8) and Mesa from Index of /repositories/X11:/XOrg/openSUSE_11.2 I changed all the corresponding system packages to the versions in that repository. I noticed that I cannot get any 3D support when pairing the last X server with the updated openSUSE 11.2 kernel (2.6.31.12_0.2). With RadeonHD driver it gives me no acceleration at all (No DRI), perhaps it is still intentionally disabled to prevent lockups in r600 cards. With Radeon KDE wouldn't start.
So to get usable driver support I have to update the stock kernel to the one in Index of /repositories/Kernel:/HEAD/openSUSE_11.2 I installed the 2.6.34-rc5-22 kernel and reboot. Immediately I notice that KMS is working, but I could not get DRI to work, presumably caused by the drm being unable to locate two related firmware files (it is there in the kernel, just doesn't know why it is not being loaded). Other than that I do not know why I can't get any acceleration with KMS on. To workaround I passed the 'nomodeset' parameter to the kernel to run in UMS mode instead, and voila! with UMS 2D + 3D accelerations are working. I can enable kwin effects just fine.
Since this is a laptop I need suspend & resume and power management working. Good news is s2ram works perfectly with extra parameter. And all the new Radeon power management options: DynamicPM, ClockGating and ForceLowPowerMode can be enabled just fine! (For UMS you need to generate a xorg.conf and put those options in)Performance is good. So far it's faster than fglrx in some areas and slower in some other area. Now this is truly amazing!
View 9 Replies
View Related
Apr 8, 2011
I upgraded a HP Proliant server to openSUSE 11.4 (X86-64) with KDE, and I'm encountering various graphical problems. This machine's been running SUSE versions since 11.0 on similar hardware with few major issues, and I did the 'upgrade' by a new install keeping only /home partition intact. This Server has 10GB memory. It has a PCI ATI ES1000 with 64MB and uses the radeon driver. It boots up fine under the monitor's correct resolution of 1600*1000, but
1) It flickers one time each 4 of 5 seconds
2) during works more and more memory is used : starting at 9% and going up to 51% after 20 minutes and I receive then allocation error in /var/log/messages
[Code]...
View 9 Replies
View Related
Jun 14, 2011
The display card of my notebook is ATI rd 6370m ,the OS is fedora14. After I installed the driver download from ATI web site, it says that my computer can only run 2D can't run 3D. I want to know if some one used the same card with me in fedora14 has run 3D sussesfully? After the installlation I run "#aticonfig" it says "can't find the adaper".
View 2 Replies
View Related
Jun 14, 2010
I'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
View 4 Replies
View Related
Oct 15, 2010
I don't understand how i should install the driver for my code...
View 2 Replies
View Related
