so i finally found my disk of ubuntu 6.10 that i know works. if booted fine and after the disk got formatted it proceeded to install. but to only gets about 73% through the install and then promptly crashes and when I tried it again it does the same thing.
View 5 RepliesI have an Apple Powerbook G4 17" Feb'2005 (1.67GHz PPC G4 CPU, 1Gb RAM, 100Gb hdd) at home. Having the infamous "vertical lines" problem, I need to use use an external 1440x900 DVI monitor (same resolution as braindamaged Apple LCD). I also have some USB-serial hardware (weather station, Arduino, etc) and a Nokia N900 configured as a router (this lets me use a fixed IP on the Powerbook).
I had Ubuntu 9.10 running 24h/24 up to yesterday, so I just updated the yaboot.conf in /dev/hda2 (the boot partition) and booted natty off hard disk and USB pendrive (great thing having an yaboot on a bootable partition). Since Apple separated me from 2900 bucks (ouch!!) six years ago, I don't want to abandon this Powerbook until its very end. But it seems Natty is not a viable option...
[code]...
So ... right now I'm having an issue after I installed ATI Catalyst 10.8 for my GPU HD 5770.Every time I try to boot, it sends me to init3 (I mean text screen). But when I check and try to switch to init5, it tells me that I'm on init5 already.And I'm still stuck on the text screen. However, safemode is still working (yeah I'm on it right now - -").
I installed ATI driver by using this instuction --- openSUSE Lizards � ATI HD57xxx fglrx drivers under 11.3
I've just downloaded ubuntu server 10.04.1 and put it on my usb flashdisk, the installation works fine until the point, where it tries to install grub.The thing is, that the installer is trying to write the grub to /dev/sda (which is my usb flashdisk) and not the raid itself.I'm using a fakeraid intel ich9r, which maps the newly created storage to /dev/mapper/isw_ecdhgaacgh_Volume0.Why doesn't install use that instead? It sees it, partitions it, even copies files to.
View 5 Replies View RelatedI am using Dell Notebook model Inspiron 1420. I run Ubuntu 9.04. I've tried but failed to install SPSS Student Version 16 via Wine. There is a message saying the installer is unable to run in graphical mode. Try to running installer with the -console or -silent flag. What is the silent flag?
View 4 Replies View RelatedI tried to install perl-tk today, and tried tcl and tk in the process. "apt-get install" is reporting success, but I can't find the commands. I expect them to be in /usr/bin, but they're not there. I've tried "clean" and "update" as well, and even rebooted, to no avail. Synaptic package manager gives the same results. This is happening on two different systems, one running koala and the other intrepid. Here's a snippet of what I've tried:
%heron 35: sudo apt-get purge tk tcl perl-tk
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package tk is not installed, so not removed
[Code]...
The problem is that Ubuntu 10.04 as delivered is not compatible with the Nvidia driver installed with 10.04. This problem is widely reported, as is a fix for it. The usual form of the fix is as follows:
To fix the above error message use the following procedure
1) Download Newest Nvidia drivers from here
2) Open module blacklist as admin gksudo gedit /etc/modprobe.d/blacklist.conf
[code]...
I tried installing Ubuntu LTS 10.04 Server Edition 64 bit on one of my drives today...
The install completed fine until it went to reboot. Then it faills while initializing the graphics. It tries (a purple flash on the screen) then goes to a text based dump on the monitor.
Ubuntu LTS 10.04 Desktop Edition run great on this machine. I'm wondering if the Server Edition confused by multiple instances of a video card? This computer is SLI bridged:
Code:
Is the xorg or whatever video subsystem that the server edition uses different than Desktop Edition?
I am having problem while compiling postfix 2.8.4 in Ubuntu 11.04. It gives me error as
gcc -Wmissing-prototypes -Wformat -DHAS_PCRE -g -O -I. -I../../
include -DLINUX2 -o sendmail sendmail.o ../../lib/libglobal.a ../../
lib/libutil.a -L/usr/lib/i386-linux-gnu -lpcre -ldb
[code]....
Now after that when I type as
# postfix
It doesn't recognize postfix command.
Out of curiosity, I decided to try the kernel-desktop-base-2.6.35-rc6.15.1.x86_64.rpm downloaded with 1-click install from here
Now my desktop can't even boot and says
Code:
Want me to fall back to /dev/disk/by-id/ata-Hitachi_HD725016GLA380_GEK830RBTV12MA-part2? (Y/n)
Both options got me nowhere. how to debug this situation?
My first upgrade attempt to 9.10 ruined my install - there was no return and as 9.10 would not install either, I reinstalled 9.04 and everything was as expected.I decided to wait for 10.04 hoping the issue had been solved - unluckily it has NOT. Neither Live CD 9.10 nor 10.04 work. New Mint does not work either - to closely related to Ubuntu, but Suse live CD does. Played around with findings from different threads - like taking out "quiet splash --" and adding modprob parameter to no avail Prime suspect is HD and HD controller (ATA/PATA) - but I could not nail it.
View 3 Replies View RelatedI had some bash scripts on Ubuntu 09.10 (mint version) that fail to work on Ubuntu 10.04. The line that fails is the following:
Code: # cat file_with_my-password.txt > sudo -S something cat: invalid option -- 'S' Try `cat --help' for more information. In my case "something" mounts some filesystems (that fail to load from fstab - bios "fake" raid 10), but I get the same error for any sudo command. It is the same script that used to work under 09.04 :-/
I decided to give Linux a try having used Windows all my life. The experience so far has been disappointing. I have a Dell 700m Laptop and am installing Ubuntu 10.04 LTS (Desktop). I have spent hours searching the internet to learn that the Dell 700m has an Intel 855 graphics card. This graphics card is apparently not compatible with the latest Ubuntu Kernel.
I was able to boot the Live DVD by pressing Enter during boot (when graphic shows), then selecting English, then pressing Esc., then pressing F6 and typing "i915.modeset=1" at the end, AFTER the two -- (it doesn't work before them per this instruction.., 3) Add "i915.modeset=1" after "quiet splash". [URL]
So after booting the Live CD, I decided to install Ubuntu to my hard drive, now the PC will not boot no matter what I do. I can still boot with the Live CD, but booting from hard drive is not possible, there seems to be no option for entering the "modeset" from a hard drive install Is there a way I can modify the modeset (on hard drive) from my LiveCD boot? Then eject the CD and boot from HD? Should I give up on Ubuntu, and use a different version of Linux? Knoppix? Fedora?
Toward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.
I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?
Here are my partitions on sda:
...from the shell in the installer, there is no grub.cfg in /target/boot/grub.
When I run it live, I see KDE4. When I install it off the same disk, it installs Gnome. I can't figure out how to install KDE4. I had no luck with apt-get install kde4 (E: Couldn't find package kde4), no luck with aptitude, no luck with Synaptic (The following packages have unresolved dependencis kdebase-runtime-bin-kde4).
View 3 Replies View RelatedI recently got a shiny new msi notebook and I decided I wanted to dual-boot Linux on it (with Windows 7 Home Premium 64-bit). I started with Ubuntu, when that failed (the GUI wouldn't install properly) I tried Mint. It worked fine, but for some reason, I hate Mint. I deleted the Mint partitions and attempted to claim back the free space in a new partition for Windows 7. For some unbeknownst reason, it failed. Since I didn't desparately need the hard drive space, I said "screw it" and went about my day.
After seeing a friend using Fedora, I figured "why not?" So I downloaded F14 and burned it to a disc and booted it. All went well so I tried installing it. The install process went normal until I reached this screen: I press "Next", and I get this: (Full text here) I start to think that anaconda has something to do with my hard drive partitions, so I open Logical Volume Manager.
Partition 1 is a recovery partition (12 GB).
Partition 2, I have no idea, but it's only .1 GB.
Partition 3 is the Windows 7 partition (172.29 GB).
Partition 4 is 113.20 GB.
Unpartitioned space is 113.20 GB.
I know this can't be right, because my hard drive is only 320 GB (and those GB aren't even "real" GB) and the partitions add up to 410.79 GB. I'm thinking that Partition 4 and Unpartitioned space are the same thing, and the existence of the Partition 4 record is the aftermath of the failure to reclaim the disk space for Windows. So how do I go about fixing this (getting rid of Partition 4 or finding a work-around)?
When i try to install the realplayer in rpm format i get the following error: Subprocess failed. Error: rpm error. Failed dependencies: lsb >= 3.1 is need by RealPlayer-11.0.2.1744-20091006.i586
View 6 Replies View RelatedI've just install SUSE 11.3. GNOME and KDE are selected as GUI session.At the login screen, in Session list I saw TWM, and after selected it as login session I couldnt login, and login screen disappear as well. It shows a black screen and the mouse pointer, and I have no idea how to switch to KDE or GNOME since no login screen.
View 2 Replies View RelatedThe repository [URL] is not currently (or no longer) valid. The path still exists up to the "Contrib" level, however, there are no files or subdirectories under it. There are also two siblings at the "Contrib" directory level ("Live" and "Update:") and there are no files under them either other than a single subdirectory called "Test" under "Update:". Does anyone know if the updates that used to be available in this repository have moved and, if so, where to? If the repository is no longer required and there is no replacement, I'll simply remove it. I have also noticed issues for several months where the updater applet will go into an "updating" state and never return from it.
View 2 Replies View RelatedI cannot install lm_sensors-2.5.5-3.i386.rpm nor lm_sensors-2.5.5-6.i386.rpm on RH 7.1.
The files complained by "failed dependencies" are present on my computer.
Why it fail to install?
Please help to fix the problem. code...
I have just downloaded and installed the latest version that I know of, Centos 5.4. I initially selected all of the packages and the installations crashed. Since I am installing it on a private network I couldn't save the info. I tried deselecting the packages until finially figuring out the 'extras' was the problem. I deselected that and the installation went fine. What's on the extra's? Part of the error message was something to do with a Python. I have been trying to use Cobbler, is that part of the 'Extras'.
View 1 Replies View RelatedSearching for one week at the forum, sorry if i missed any posts about my issue,
My specs:
Microprocessor1.4 GHz Intel� Celeron� M Processor 360
Microprocessor Cache1MB L2 Cache, 400MHz FSB
Memory256MB 400MHz DDR2 System Memory (1 Dimm)
Video GraphicsIntel� Extreme Graphics 2 (shared)
Video Memory256mb: up to 64mb shared
Hard Drive40GB (4200RPM) Hard Drive
[Code]...
Today i used the mini CD command-line install, got the system running at the terminal, but installing xorg or gnome and rebooting results again in fail. Tried to edit xorg.conf through nano, after sudo apt-get install but before reboot, but was fail again (couldn't open the file). I dont know exactly if its the gnome or the X the issue, because i tried at the same notebook the ubuntu 8.04, the wallpaper pops up but it freezes after, i cannot use the X. Both cd's are checksum valid originals from canonical
is there any ways to install gnome and x in the terminal, edit the xorg.conf with anything that solve the problem and reboot? update 23:11PM: I found it, its a issue with old intel graphic cards. i915.modeset=0 xforcevesa in the boot parameters and i could use the installer in the lucid live cd. but now i need to edit the grub to always boot with this parameter.
So after a win7 wubi install, I updated through system update. Now after I choose ubuntu in the win bootloader it takes me to a grub screen. How can I boot into linux and remove grub? (This isn't my computer otherwise I would dual boot and let grub take care of it).
View 5 Replies View RelatedI have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
I installed my new debain.(6.0) but its all code. (i looked it up, i need a a win X or GNOME). but since i dont know code based interfaces, how do i install it on the computer. (once Ive got my visual interface im generally fine till i hit advanced)
View 10 Replies View RelatedSystem Specs:
Toshiba A135-S2276 Laptop With Vista
ATI RADEON 200M 128MB
1.78Ghx Core Duo
2GB RAM
I am trying to Install Fedora 11 from a live install CD. I know it works because I tried it on another system. After the little Balloon that shows its loading completes the screen scrambles, later a mouse pointer appears then freezes shortly after. When I remove Quiet from Kernel Params. Lots of text then Samething.. Scrambled Screen the Freeze. I have tried adding the Following Parameters to the Kernel (nomodeset, xdriver=vesa, acpi=noirq, noapic). This sounds like a common problem with ATI based graphics and all answers seem to point the "nomodeset" and the "xdriver=vesa" but they dont seem to help.
I try to install Fedora 12 from CD.
The CD is booted fine, but when i press on "Install to Hard Drive" icon, its not starting installation.
in the /var/log/messages i can see the following: localhost dbus" Can't send audit system: USER_AVC avc: received setenforce notice (enforcing=1).....
I use Dell latitude 110L.
I tried installing the latest NVidia proprietary drivers, but it was epic fail.
OpenSUSE 11.2
It fails with an "unable to compile kernel module" error.
I stupidly overwrote the log file without backing it up. It had a lot of compile warnings, but I didn't see anything that looked like a compile error. I'll try to generate it again.
I am trying to install opensuse 11.2 as DomU on a Host running also opensuse 11.2. When I use a file as destination everything goes well and the installation finishes with success. But when i install the DomU on an LV (Logical volume) with Yast, once the installation finished and the DomU restarts, I get the Error "Boot Loader didn't return any data"
I mounted the LV and I verified the presence of /boot/vmlinuz-xen, /boot/inirtd-xen, menu/lst etc ....
[Code].....
I'm running a clean install of the latest version of -current64.When I try to run a number of SlackBuilds from SBo, the scripts stop (no error) after the make install step.If I manually run all of the commands after make install, I get a fully functional package, and the program works with no problems.In looking as the logs, I don't see any errors during the configure, make, or make install steps.
I'm having problems with other scripts as well that are not XFCE related, but these are good examples. Another oddity is that the SlackBuild script for thunar-archive-plugin at slacky.eu works.I've never had any problems with these scripts before, and many other scripts still run just fine. I can't track down a common problem here.