OpenSUSE Install :: DomU (paravirt ) On LVM Fail To Start
May 19, 2010
I am trying to install opensuse 11.2 as DomU on a Host running also opensuse 11.2. When I use a file as destination everything goes well and the installation finishes with success. But when i install the DomU on an LV (Logical volume) with Yast, once the installation finished and the DomU restarts, I get the Error "Boot Loader didn't return any data"
I mounted the LV and I verified the presence of /boot/vmlinuz-xen, /boot/inirtd-xen, menu/lst etc ....
[Code].....
View 1 Replies
ADVERTISEMENT
Dec 15, 2010
I am trying to install a paravirtualised SLES10 domU in a Squeeze beta 1 dom0. But the Sles distro does not exist in the list in /usr/lib/xen-tools when I run the xen-create-image command. is there a general name to use ?
View 1 Replies
View Related
May 17, 2010
I'm using virtual network (NAT network) for my domU.When I change dom0's firewall setup, the domU will fail to connect to Internet anymore.So far, the only way to bring the network back is reboot dom0 !I try to restart service network and libvirtd on dom0 ... it doesn't work.How can I bring the domU network back without reboot dom0 ?
View 1 Replies
View Related
May 31, 2011
I've setup a server running OpenSUSE 11.4 64bit and configured as a Xen server. I was easily able to install another OpenSUSE 11.4 installation in a DomU and also a Windows DomU. However, I have major issues trying to install CentOS 5.6 in a DomU. For example, if I install right from the DVD, I get a kernel panic using HVM and a "can't find disk, choose disk driver" error using PVM. Some of our server applications require a RHEL5 host distro which is why I'm running CentOS 5.6 for those services.
View 2 Replies
View Related
Nov 13, 2009
I've installed OpenSUSE 11.2 x64 on my Intel Core 2 Quad machine with 8GB of RAM nstallation went perfect. After the main installation, I've installed the XEN-kernel. Booting into the XEN-kernel goes fine.But, now I want to install the first domU (paravirtualized). I use the same installation disk but OpenSUSE 11.2 won't install. It crashes directly. Neither the x64 or the x86 version works.The strange thing is that I can install OpenSUSE 11.2 as "full virtualized".Also, OpenSUSE 11.1 (paravirtualized!) as a domU works perfect!!
View 9 Replies
View Related
Feb 9, 2011
problem booting into xen domu. THe console shows this.
[ 1.457957] PCI: Fatal: No config space access function found
[ 1.648029] bootsplash: found, but framebuffer can't handle it!
[ 1.677603] i8042.c: No controller found.
[code]....
View 1 Replies
View Related
Jan 6, 2011
OpenSuSe fail to start if loading on fail safe following msg appears
blogd: no message logging because/var file system is not accessible
I have run defrag through XP
View 2 Replies
View Related
May 24, 2011
vsftp dose not work in my machine. I try to restart vsftp by command
Code: sudo /etc/init.d/vsftpd restart but it failed:
Code: Shutting down vsftpd done Starting vsftpd startproc: exit status of parent of /usr/sbin/vsftpd: 1 failed
View 9 Replies
View Related
Sep 16, 2010
Just for information in case if it is important to start dhcpd and named: Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable
Secondly Both config files in /etc/sysconfig set parameters to start in jail root but
[Code]....
View 2 Replies
View Related
Sep 4, 2010
So ... right now I'm having an issue after I installed ATI Catalyst 10.8 for my GPU HD 5770.Every time I try to boot, it sends me to init3 (I mean text screen). But when I check and try to switch to init5, it tells me that I'm on init5 already.And I'm still stuck on the text screen. However, safemode is still working (yeah I'm on it right now - -").
I installed ATI driver by using this instuction --- openSUSE Lizards � ATI HD57xxx fglrx drivers under 11.3
View 9 Replies
View Related
Sep 2, 2010
Out of curiosity, I decided to try the kernel-desktop-base-2.6.35-rc6.15.1.x86_64.rpm downloaded with 1-click install from here
Now my desktop can't even boot and says
Code:
Want me to fall back to /dev/disk/by-id/ata-Hitachi_HD725016GLA380_GEK830RBTV12MA-part2? (Y/n)
Both options got me nowhere. how to debug this situation?
View 9 Replies
View Related
Feb 6, 2010
When i try to install the realplayer in rpm format i get the following error: Subprocess failed. Error: rpm error. Failed dependencies: lsb >= 3.1 is need by RealPlayer-11.0.2.1744-20091006.i586
View 6 Replies
View Related
Aug 23, 2010
I've just install SUSE 11.3. GNOME and KDE are selected as GUI session.At the login screen, in Session list I saw TWM, and after selected it as login session I couldnt login, and login screen disappear as well. It shows a black screen and the mouse pointer, and I have no idea how to switch to KDE or GNOME since no login screen.
View 2 Replies
View Related
May 21, 2011
The repository [URL] is not currently (or no longer) valid. The path still exists up to the "Contrib" level, however, there are no files or subdirectories under it. There are also two siblings at the "Contrib" directory level ("Live" and "Update:") and there are no files under them either other than a single subdirectory called "Test" under "Update:". Does anyone know if the updates that used to be available in this repository have moved and, if so, where to? If the repository is no longer required and there is no replacement, I'll simply remove it. I have also noticed issues for several months where the updater applet will go into an "updating" state and never return from it.
View 2 Replies
View Related
Mar 3, 2010
I tried installing the latest NVidia proprietary drivers, but it was epic fail.
OpenSUSE 11.2
It fails with an "unable to compile kernel module" error.
I stupidly overwrote the log file without backing it up. It had a lot of compile warnings, but I didn't see anything that looked like a compile error. I'll try to generate it again.
View 8 Replies
View Related
Mar 10, 2010
I have an etch-based Xen server that has several Xen domU's on it. All the domU's are etch or lenny based, but I'd like to install a karmic guest. I use xen-tools to install my domU's - e.g., xen-create-image --debootstrap <etc.>After much googling, I've found bits and pieces of info that have gotten me closer to the goal, but the debootstrap script I have is for hoary (I think etch came with this), and I'm pretty sure this won't work.
If you have been able to successfully install a Karmic guest on an etch or lenny host, I'd be very grateful for pointers.
View 1 Replies
View Related
Jan 4, 2010
Sometimes openSUSE boot ends with these errors:[url]
(I do not know why it prints an error on Ext2 filesystem when the disk is formatted Ext4...)
[url]
Here is my Fstab:
Code:
View 9 Replies
View Related
Jun 25, 2010
I was a window vista user. I wanted to install suse into my laptop so i shirk a free partition (around 70-80GB free partition) to install suse.After I had installed suse, I found out that I fail to boot my window vista operation system. It had gave me several choices...
1 : suse....
2 : suse....
3 : window 1...
[code]...
View 7 Replies
View Related
Jul 28, 2010
I am installing from the scratch a 11.3 on a PC on which previously 11.1 did run flawlessly. (Athlon 3700 with 3GB ram and Asrock socket 939 mainboard. Graphics is Nvidia. The installation comes every time up to 90% when it arrives at "font initialization). No error message is displayed. The little "cursor wheel" is still turning but else, there is no activity.
DVD from an sha1 checked and MD5 doublechecked download was burned with lowest speed in K3b and verified by the same program post burn, with full success of every verification.
Tried to change DVD reader but does not change the result. Runs speedy up to that step.
View 5 Replies
View Related
Jun 2, 2011
during boot-up on my desktop, running openSUSE 11.4 with KDE 4.6.3, there are sometimes (not always) some failed services. Most of the time it is postfix and some other service. Today it is just mcelog. So when I switch to the first terminal by strg+alt+F1, I see that mcelog has failed.The system is running anyway, so I wonder if it is safe to turn them off? I would turn off postfix and mcelog. Do I harm the system with that? Would it boot again, after I have turned them off? Or is it recommended to let them stay as they are?As far as I understood, postfix is just a mailserver, which would be used, if I would run a mailserver on my own. But I don´t. I just read mails, via IMAP... But mcelog? Whats that?
View 4 Replies
View Related
Jun 25, 2011
I've bougt a new pc (i5-2050k, Nvidia GeForce 560Ti) and wanted to install Linux beside Windows.But each Linux-distribution (exept the old ones from Mandriva) fails installing/starting als livecd/checking for installation errors/..... while initiating udev.Is there any known bugfix for this problem? Remind, there is just Windows, so don't give me any shellcode to execute
View 5 Replies
View Related
Nov 9, 2010
I have a OpenSuse Linux system that needs to use only one core of its four core processor. I tried putting this in the menu.lst file.
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3
root (hd0,1)
[code].....
Am I placing the nosmp and maxcpus options in the proper location?
View 3 Replies
View Related
Jun 27, 2011
I had problems with hard disk failing and bad block informations in smartctl and palimpsest.
After several avaliations a concluded that apps don't show smart informations if a hard disk partition is monted.
When i boot with livecd it shows a failure in the hard disk, but in monted system dont.
View 9 Replies
View Related
Jul 24, 2011
I have installed openSUSE with Gnome3.
I had to install the nVidia proprietary drives so the OS would boot into Gnome3 and not fail safe mode. Without the proprietary drivers installed the display settings said:
Driver: software rasterizer in use
After installing the nVidia drivers Gnome3 works in one monitor, but I would like to be able to use my other two monitors (totaling three with two video cards.)
When I run nvidia-settings to generate an xorg.conf file it hangs, so I used nvidia-xorgconf to generate the xorg file and then used nvidia-settings to configure my extra screens.
This fails with a permissions error, running sudo nvidia-settings fails with the following error:
ERROR:
So, I ran nvidia-settings, saved the settings file to my /home/$USER dir, then copied xorg.conf to /etc/X11/
Logging out and logging back into Gnome fails with the error:
This problem extends to Ubuntu running Gnome3, so my thinking is:
a) Imma id10t and something in my xorg.conf file is wrong,
b) there is an issue with Gnome3/nVidia/Multiple displays.
I would really like to use Gnome3, it works on multiple other machines (ironically all ATI devices) just not the machine I use all day long...
Here is my xorg.conf file as generated by nvidia-settings.
Code:
View 6 Replies
View Related
Mar 16, 2010
Yesterday I applied the su security patch to my openSuSE 11.2 x86_64 system.After applying the patch, any attempt at su failed, and after rebooting the system earlier this morning any login (root, user, otherwise) fails with a "Permission Denied".Is it possible that the su update somehow messed up my (standard) pam settings?
View 10 Replies
View Related
Jul 6, 2010
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
View 9 Replies
View Related
Jul 13, 2011
I have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
View 9 Replies
View Related
Dec 22, 2010
I installed CentOS 5.5 x86_64 on server as xen dom0. When i try to install CentOS 5.5 x86_64 as guest (hardware virtualization) i see "Kernel panic"...Installation not started: i see install cd's boot menu, press Enter... that's all.
Dom0 kernel: 2.6.18-194.26.1.el5xen, xen 3.0.3
Only standart installation, repo's and update's...
Code: 8b 72 40 48 8d 4c 24 1c 48 8b 7a 20 ba c4 01 00 00 e8 5f 77
RIP [<ffffffff8008192f>] cpuid4_cache_lookup+0x256/0x356
RSP <ffff81010fc75d60>[code]....
View 2 Replies
View Related
Jan 21, 2010
I don't know if this is the right place to post this but here goes anyway.
System:
ASUS Pro50n Laptop
Distro: Arch Linux
WM/DE: Gnome
I've recently installed Arch linux with the gnome desktop environment, and everything is working fine apart from HAL and DBUS. I'm not sure why this problem is happening and I have no idea about any settings for HAL and DBUS all I know is what it says in the wiki.
The problem I have is that HAL and DBUS fail to start. I have tried /etc/rc.d/hal start and get the message BUSY.. then FAIL. I have tried /etc/rc.d/dbus start and get exactly the same. I have tried restart and that also fails. *EDIT* I have just tried /etc/rc.d/dbus start again without changing a thing and dbus has started successfully but HAL still fails.
The further problem, which I think is related to HAL not starting... possibly... Is that I can't watch DVD's / anything in the DVD drive. I can see it in Places >Computer as "CD/DVD Drive: 3_MEN_IN_ANOTHER_BOAT" but when I click to load it or if I open Totem and try and load it all I get is the error: Unable to mount location: Not Authorized. Is this related to HAL or is this a completely different issue?
*EDIT* fixed the HAL problem, reinstalled xf86-input-evdev package and it seemed to fix the problem. However I am still having a problem with watching DVD's
View 11 Replies
View Related
Jun 22, 2010
I type this 10,20,30,40,50 * * * * /root/auto.pl
my log file
Jun 23 10:10:01 localhost crond[7702]: (root) CMD (/root/auto.pl)
Jun 23 10:20:01 localhost crond[12022]: (root) CMD (/root/auto.pl)
Jun 23 10:30:01 localhost crond[14610]: (root) CMD (/root/auto.pl)
Jun 23 10:40:01 localhost crond[18676]: (root) CMD (/root/auto.pl)
Jun 23 10:50:01 localhost crond[22402]: (root) CMD (/root/auto.pl)
Jun 23 11:01:01 localhost crond[29476]: (root) CMD (run-parts/etc/cron.hourly)
but my application doesnt run at all. my script is in perl language
View 5 Replies
View Related
