I have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
I'm trying to install 11.2 Gnome from the live cd on an HP n410c laptop. The install seems to go smoothly until I'm told I must reboot without the cd. I've tried three or four variations of the process and each time I see, "Error Loading Operating System."I've reloaded the live cd and examined /boot/grub/menu.lst. It appears to be correct. It seems like the initial GRub loader isn't found in the MBR.If I run grub-install, the graphical interface comes up then complains, "Because of partitioning, the boot loader cannot be installed properly."
Installed 11.4 on a machine with two SATA drives which had previously been running Windows 2003. I deleted the Windows partitions and created a new partition scheme: Swap, root and one additional partition on the first disk, one large partition on the second disk. Install runs fine but upon reboot I get "Error loading operating system". Booting off a Windows floppy and running FDisk shows that the root partition is marked as active.
This is a IBM T23 (10 years old)pentium3 1.1ghz640mb ram28gb hdd (contianing several bad sectors)intel graphicseverything works out of box (graphics, wireless, etc) on a live cdhowever after installation, upon boot, it displays "Error loading operating system" right after BIOS and before even goes into GRUB and is stuck there.Enter live cd, and choosing boot from harddrive does not solve the problem.Already did the CD check, which shows no problemdid a bit googlingturned out this could be an issue with a dying harddriveand sadly, it is the case, the harddrive on this 10 year old laptop is indeed dying D:However, installing windows xp posed no problem... (altho tons of driver issue, but anyways...)I have a few solutions in mind1). just use a usb stick as the replacement for harddrive2). get a new harddrive (not even sure what to get for this laptop D: )3). find a magical way to fix it :SWould definitely be glad to know a way to load this system on this existing harddrive for nowI was told earlier that there are ways to tell the system to avoid mapping the bad sectors.
Several months ago I installed Suse on my box...setup a dual boot with Windows XP. By default it booted into Suse. The problem is that the company I work for, not a science company, is VERY windows-centric, so nearly everything I do is in windows. The IT people here periodically reboot the computers which creates a problem for me since I often work remotely and this results in my computer booting into Linux.
So, to fix the problem I went into Suse, opened Yast, and changed the default boot to windows, and restarted.Now it won't boot into anything and not even the boot menu comes up.I get the following message:Error No operating systemIntel(R) Boot Agent GE v1.3.22Copyright (C) 1997-2008, Intel CorporationCLIENT MAC ADDR: 00 1C C0 E2 61 31 GUID: CAB279BC 5BF7 11DE 8A18 0007E9BECBF3PXE-E53: No boot filename receivedPXE-M0F: Exiting Intel Boot Agent.Boot FailurePress any key to continueIf I push any key, the same error repeats. Really, I truly couldn't care less about the stuff I have on the Linux partition; however, the Windows partition has TONS of data and programs I've written that would be an enormous loss.
i have a problem when i use test drive, it doesn't boot into the operating system. it just look like in dos when i login. what is wrong? shouldn't test drive let me see how its look when i use the live CD?
I was a window vista user. I wanted to install suse into my laptop so i shirk a free partition (around 70-80GB free partition) to install suse.After I had installed suse, I found out that I fail to boot my window vista operation system. It had gave me several choices...
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
I have a problem installing the oporating system, from a USB. I keep getting the error: Could not find Kernel: GFXboot. I have used a USB loader to put the ISO file on the flash drive as well as extracting the file using winrar. (separate occations) I have also tried both LIVE CD as well as the full DVD.
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured while installing GRUB ver 0.97 (640k lower/3072k upper memory) [minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename] grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5) Error 25 disk read error grub> quit
I have a fancy new Quad Core Xeon machine here that I'm trying to install F10 x64 on. The installation went fine. When it reboots the first time, though, I get the dreaded Error Loading OS.
So I dug up my bookmark of the awesome Grub HOWTO here and followed the steps to install Grub manually. Alas, I get the same result after installing it. Even tried doing a makeactive (hd0) just in case, but no luck.
I did more searching and searched for "raid install" but didn't find anything helpful. So here I am... hoping somebody has some insight.
I'm trying to install OpenSUSE on an external usb drive but when I boot from USB, all I get is a message saying "Missing Operating System". I've tried different ways of partitioning the drive either by letting OpenSUSE do it automatically or doing it myself. It's just a basic partitioning scheme, with swap on one partition sdb2 and the rest on root sdb1 .
I made sure to have GRUB be installed on the root partition of sdb (usb drive) instead of in the MBR (I've installed Fedora and Ubuntu on usb drives this way).
So ... right now I'm having an issue after I installed ATI Catalyst 10.8 for my GPU HD 5770.Every time I try to boot, it sends me to init3 (I mean text screen). But when I check and try to switch to init5, it tells me that I'm on init5 already.And I'm still stuck on the text screen. However, safemode is still working (yeah I'm on it right now - -").
I installed ATI driver by using this instuction --- openSUSE Lizards � ATI HD57xxx fglrx drivers under 11.3
I'm trying to install Ubuntu 10.04 (32 bit)on my laptop (where currently is installed the amd64 version of Ubuntu 10.04 that I've decided to remove because of some small issues).I've tried using the installation CD (the same I've used to install it on my desktop, so I know that is a working copy),but at boot, although I select to boot from CD, the Live version doesn't start and Ubuntu 64 is run as usual.I've tried to create a startup diskon a usb pen,there the live version seems to start but then Busybox 1.3 is loaded and there is an error with initfrm saying that no operating system can be found.I've been told to download the alternate edition, but I'm still downloading it,
ich habe Probleme mit dem Booten meines Computer.Auf dem Laptop ist Windows 7 Starter sowie Suse 11.1parallel installiert. Als ich nun in Suse die Bootreihenfolge (vorher Suse jetzt Windows) �ber Yast ge�ndert hatte.Zeigte mir mein Computer nur noch"no operating system found" an. Mit der Software Super Grub Disk konnte ich das Suse wieder starten (dann erscheint auch die Boot-auswahl). Daduch konnte ich auch alle ½nderungen rckg½ngig machen. Trotzdem bootet der Computer nicht mehr
I am a newby in linux. i wanted to install lampp (xampp) but it gaves me an error that the operating system doesn't support 32 bit. I am using at this moment Fedora 12 x86_64.
I looked in another thread and they sad that i need to run yum whatprovides missing_lib_name but it don't show anything is there another way to get 32 bit support in linux because i really need xampp.
I recently installed opensuse on my computer due to it contracting a virus and not letting me reistall the original operating system on it. but i know nothing about this program. i have almost everything up to date and working on it. one thing i find strange is when i try to update the flash or java on it that i have to do all this extra stuff to get it to run. i do not know what programs to pull up to type the stuff down thats given in the java installation instructions. the movement of the webpages when scrolling is running slow and videos on ..... do not have as good of quality to it as it did on windows. so im assuming something is out of date or there are settings i need to adjust.
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory bash: ./etc/sysconfig/chron : cannot execute binary file X_MOUSE_CURSOR : Undefined variable
I have a single boot system that was working great until this morning when it locked up. I was working as I always do when the system stopped responding completely. CTRL+F1 did not work to allow me into the back so I could log in and see what was happening.
CTRL+SHIFT+SysRq did not recover the system or interrupt what ever was causing the lock up.
SSH from another system failed as the client did not respond
So I had to do a hard boot and when I did I got this:
GRUB Loading stage1.5.
GRUB loading, please wait... Error 17
Again this is a single boot system no Windows other than in VMWare inside the install. It is a multi drive with RAID set up workstation that I have at work. The short of it I am sole IT support as our companies ITS will not support Linux. In 5 years of operations with Linux at work this is my first issue, and I can't figure it out. I already tried the PartedMagic solution (ref = Re-Install Grub Quickly with Parted Magic) and that didn't work.
I re-installed the system completely even going to the extent to change my partition scheme just to make sure that wasn't the problem (which doesn't make sense as the system had been running for 46 days non-stop without a problem). Upon reboot after performing a complete security update I got the Error 17 message again.
Most of the filesystem tools and partition programs featured by Parted Magic include man pages. To read a manual page, simply type man and the name of the tool. (Examples: 'man ntfsprogs' or 'man fdisk')
I just installed Fedora 13 x85_64 on Intel s45sf server board with hardware raid and 8Gb memory. After installation and reboot I got the message: Error Loading Operating System I tried installation with no raid I doesn't work.
I'm new to both Ubuntu and this forum, so please try to bear with me.I have a 500GB HDD with these partitions Screenshot.pngI'm currently using the live CD to boot because when I try to boot to this HDD it simply comes up with the error "Error loading operating system". It was working fine until I started reformatting a different drive with XP on it; since then it has had the error.As far as I know I need to reconfigure GRUB to boot to the correct partition, but I do not know how to do this.I know that there are already threads about booting/GRUB problems. I have looked at a lot of them but because no one has exactly the same problem as me I do not know what to do.
I seem to be having a problem creating a bootable Ubuntu USB drive. After following the instructions at [URL] my PC says "Error loading operating system". It doesn't provide any information as to why it fails to load the OS. I selected the the "daily live" distribution of Ubuntu.
during boot-up on my desktop, running openSUSE 11.4 with KDE 4.6.3, there are sometimes (not always) some failed services. Most of the time it is postfix and some other service. Today it is just mcelog. So when I switch to the first terminal by strg+alt+F1, I see that mcelog has failed.The system is running anyway, so I wonder if it is safe to turn them off? I would turn off postfix and mcelog. Do I harm the system with that? Would it boot again, after I have turned them off? Or is it recommended to let them stay as they are?As far as I understood, postfix is just a mailserver, which would be used, if I would run a mailserver on my own. But I don´t. I just read mails, via IMAP... But mcelog? Whats that?
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb d: 150 gb e: 150 gb f: 100 gb g: 50 gb and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
I installed opensuse 11.2 64bit on my external hard drive with the idea that this way the two OS would be completely seperate and I could just use suse when I felt like it. Everything boots fine for both OS when the hard driv is plugged in but when it is unplugged I can't get past a boot screen which says: Grub loading stage 1.5 Error 21 I have seen on another forum a fix using the windows install disk but I no longer have this. Is there some other fix I can use to make my laptop portable again.
Testing a Laptop with a live CD proved the gfxboot menu and loading screen during loading. After installing, I am seeing the "behind the scenes" of linux loading and showing done in green.
How do I get the graphical system loading screen shown?
I have openSUSE 11.2 and boot using GRUB. I was looking on start-up options for 11.2 and saw where it said splash=silent and quiet showopts I was wondering what they meant?
During boot-up of openSUSE 11.2 (dup'd from 11.1; default runlevel 3) the following message appears:
Code:
My question now: Is there a way to tell SUSE to set the above mentioned keymap using UTF-8 encoding instead of assuming ISO-8859-15?
The few Google search results (~7) on this topic also seem to indicate that this is a 'German-only' problem because it only seems to appear when setting German keymaps.
