I installed my new debain.(6.0) but its all code. (i looked it up, i need a a win X or GNOME). but since i dont know code based interfaces, how do i install it on the computer. (once Ive got my visual interface im generally fine till i hit advanced)
I've got some source code that loads and plays WAV files through the OSS drivers (and USB audio). The code works even under 2.6.34. Is there any benefit to rewriting the code using the ALSA system?
since it started i cannot launch software-center, vlc, emesene... they all stopped working... i checked the logs of synaptic to see if i removed a python package and i didn't. i tried selecting all python packages for reinstall, and it didn't help! i really don't want to reinstall ubuntu.
I notice that on DistroWatch, the descriptions include "debian based", "arch based", etc. For the newbie, is there any practical difference between the different bases, or is it a Coke vs Pepsi type question?
Is a distro based on Debian say, easier for a newbie to learn or work with than say one that is FreeBSD based?
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
Whats better partition based install or LVM based install?Does one perform better than the other?I have a 640 gig drive.I have win 7 installed on a 360 gig partition.The remaining space is free.
I'm writing a bash shell script that among various other things will traverse through a directory with hundreds of files and rename those who match a pattern found in a config file. It's expected that only about one in ten files will actually match, and those who don't, will simply just be ignored for this purpose.
This should for instance cause the file "dBase program file December 1987.prg" to be renamed "Clipper source code December 1987.prg", and conversely "C++ source August 1996.cpp" to be renamed "C source code August 1996.cpp" etc.A sample file such as "Random Data File.dat" should not be renamed here since it's not mentioned in the config file..What is the quickest, most elegant way to do this in bash?I am thinking of using bash's built-in regex matching combined with the /bin/rename utility, but don't quite know how to get started to catch this..I guess there are plenty ways of doing this in perl and elsewhere as well, but since this has to integrate into a pre-existing bash script, that's what I'm looking for.Anyone out there with a spare moment to offer a hint in the right direction?
I'm using Debian Jessie and I'm trying to install some Gnome Shell Extensions from this site: [URL] .....
I click on the extension and it shows a button that I can turn ON or OFF. It's OFF by default. Then I click it, it turns ON and I'm asked if I want to download and install that extension. I say Yes! But then nothing happens. If I visit "Installed extensions" session, it says there are no extensions installed. And if I refresh the extension page, the ON button becomes OFF again. No matter how many times I try to do this, the result is the same. I tryed it with Iceweasel (v. 24.2.0) and Google Chrome (v. 32.0.1700.77) and default gnome-shell (v. 3.8.4).
When i finish install debian7.8 wheezy in my Acer computer(graphics :GT750M+ Inter HD Graphics Family),
it appear:
"GNOME3 Failed to Load" " Unfortunately GNOME 3failed to start properly anmode" "This most likely means your system(graphics hardwcapable of ....."
i check system's Driver status:Gallium 0.4 on llvmpipe(LLVM 0x209) Experience Fallback so i try to install nvidia drivers in debian,but i have failed many times. everytimes i finish install nvidia drivers i 'startx " failed
I know this is probably something small that I'm missing, but I haven't got a clue to be honest with you. I've setup a proper LAMP and everything on the server is working properly. I'm thinking maybe it's a file permission..? Well let me get to the problem. Everything is installed and it's time for me to complete the web-based install. I've tried going to just phpBB3/,phpBB3/index.php, phpBB3/install...etc! When I insert any of those in the address bar with my FQDN obviously, it decides to just download .php files all over my desktop.
I initially installed Debian 8 onto my iMac G5 (with KDE), and it would boot to a black screen. I then tried again, and reformatted+reinstalled with only "Standard system utilities", "Print server", and "SSH server".The boot hangs before I get to a log-in prompt. Please see the attached log files I pulled off by booting from the rescue CD option. (I got an error when attaching the log files, so I used tinyupload to upload the files.URL....
Here's some of "syslog" Code: Select allApr 27 17:37:45 iMacG5 systemd[1]: Started System Logging Service. Apr 27 17:37:45 iMacG5 kernel: [Â Â 13.137638] Unable to handle kernel paging request for data at address 0x00000008 Apr 27 17:37:45 iMacG5 kernel: [Â Â 13.137645] Faulting instruction address: 0xd000000002314488 Apr 27 17:37:45 iMacG5 kernel: [Â Â 13.137654] Oops: Kernel access of bad area, sig: 11 [#1]
I was triyng to install Debian on a AMD K6-2. I use debootstrap, and installed Lenny, with a kernel linux-image-2.6.26-2-486.
After that apt-get update and apt-get upgrade and I get:
The following packages will be upgraded:
Since release 150, udev requires that support for the CONFIG_SYSFS_DEPRECATED feature is disabled in the running kernel.
Please upgrade your kernel before or while upgrading udev.
AT YOUR OWN RISK, you can force the installation of this version of udev WHICH DOES NOT WORK WITH YOUR RUNNING KERNEL AND WILL BREAK YOUR SYSTEM AT THE NEXT REBOOT by creating the /etc/udev/kernel-upgrade file. There is always a safer way to upgrade, do not try this unless you 0understand what you are doing!
And similar messages appears trying to install xfce4...
I have a weird issue that I have not seen on any forum. My jaunty on DELL studio laptop seems connected to net, but I can not access any network service (ssh, firefox etc.). But when I connect a cable the cable lights blink as it should be and in wireless connection my wifi light blinks.
It was working 2 days ago without problem, and I have not done big changes recently.I removed and reinstalled network-manager and network-manager-gnome. Nothing changed. I see a message in each restart as follows (when Openafs is starting). I can reproduce it with "/etc/init.d/openafs-client restart"
Code:
ADVISEADDR:error in specifying interfaces: no existing ip interfaces found
I have a question regarding to the Graphical Splash Screen. Is their a way to show the text based startup on booting your OS? So. I don't the OpenSuse Background with the loading line. But i want the half transparent black background if possible or just the black background with all the loading texts. The black and white screen.
I have 3 Interfaces for a different LAN's and when I start one interface the another interfaces goes down.How can it's possible?I configure my ethernets as:
If I try to add a new interface (eth1) to /etc/network/interfaces, I get
Code: * Reconfiguring network interfaces... SIOCSIFADDR: No such device eth1: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device
[Code]...
How do I add 2 interfaces and get anyone of them to work, as available ?
This is my first post and I'm pretty new on Debian. I had used Ubunu for a while now and I've decided to move on Debian Squeeze.But I've one problem: I've a Java programm to install and the installer is GUI Java based. When I run the script, I've the next message:
Preparing to install. Extracting the JRE from the installer archive.Unpacking the JRE.Extracting the installation resources from the installer archive.Configuring the installer for this system's environment.Launching installer Graphical installers are not supported by the VM. The console mode will be used instead. Preparing CONSOLE Mode Installation. But this program is not able to run the installation in console mode.
I've tried to install sun-java6-jre but without success.Has anyone an idea to help me install this programm? My Configuration: Debian Squeeze 6.0 amd64.
I'm using Debian Squeeze with backports turned on and I've installed connman and it cannot see my wireless networking interface. I know my wireless card has a working driver because I have WICD on the same system and it connects just fine.I am using the Enlightenment desktop though and it only integrates with the connman wireless manager - so I would prefer to use this instead of WICD. Anyone have any ideas on how I can get connman working? What extra configuration needs to be done after installing?
I added my user to have the same permissions as root to the /etc/dbus-1/system.d/connman.conf file and I added my tiwlan0 to /etc/network/interfaces as a DHCP connection with no changes in functionality :-/. Been searching around online and reading man pages for the last couple days with no good results. Any input would be awesome!
So I've always asked this in the past when I get on a Debian system. This makes no sense to me but I just don't see how I restart network interfaces (i.e. eth0) on a standard Debian install. If I change the static I.P. address listed in /etc/network/interfaces from x.x.x.100 to x.x.x.101, I then assume I can simply do any of the following:
- /etc/init.d/networking stop | start - ifdown eth0 - ifup eth0 - service networking stop - service networking start
All the commands above do nothing. My only solution I know that works and implements the changes I've made is a complete system reboot which to me in Linux, is ridiculous. I've struggled with this over and over and nothing I do correctly assigns the new I.P. in the 'interfaces' file to the actual adapter. This isn't my single isolated Debian machine but every Debian machine I can get my hands on. Servers, workstations, VM's, any release, etc etc etc. Below is my interfaces configuration file:
I know of 3 at least so far Sidux and GRML and DRBL are there any others that are based on stabel or sid? or what? frugal as in like puppy, tinycore, dsl, etc nomadic like, usb, hd, etc?
I recently switched from Ubuntu server to Debian server, and I carried over many of the same configurations. This is pretty much a fresh install.
I cannot get the default gateway to stick by using the /etc/network/interfaces. I can ping my default gateway but nothing beyond it either by name or IP. code...
I would like the default gateway to stick between reboots. Could someone point me in the right direction?
I had one of those random system deaths, so reinstalled squeeze (daily netinst image I think...) on my eee 1000, which uses an rt2860 wireless chip. The new install only installed 2.6.32, which I had been avoiding using because of a few problems, including it dealing with networking slightly differently. I couldn't get it to work - even without encryption - using wicd. Having had a read of [URL]... , I had a look at /etc/network/interfaces, which read; This file describes the network interfaces available on your system and how to activate them. For more information, see interfaces(5).
[code]...
ra0 is now called wlan0, as far as I'm aware. I've read in several places that it is best to expunge this file of all references to wifi, so I removed the bottom section (after '# The primary network interface'). I still got nothing. However, if I go ahead and change the 'ra0's to 'wlan0's, it seems to work - wicd connects. Not very familiar with Debian (spent more time on SUSE. Drop your tomatoes - I like it. Any idea what is happening? Is what I'm doing wrong? Conversely, is the file wrong? Should it be reported? Against which package? Including any particular files?
I have a netgear wg111t that is running with ndiswrapper. It has an atheros chipset, but calling it ath0 didn't work.
Heres /etc/network/interface :
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo
I just installed qemu and want that my VM should have net access too. So for that I installed bridge-utils and used URl....Add both the interface with the second computer, and the interface that leads to the existing network. Do it with this command: # brctl addif br0 eth0 eth1
My Iceweasel is not consistently opening pages. This is new behavior after changing the /etc/network/interfaces file for setting up bridging. The home page is advanced google search. When Iceweasel opens to google, I get a message saying the site is not secure and won't open it. Inputting [URL] ...., it takes about 90 seconds before it opens the site then freezes. If I go to forums.debian.net, the site is fully navigable, if I put anything in the Iceweasel search bar, it freezes.
I have a laptop connected to internet via wlan0. I also have eth0 interface and with it I share internet. I want to modify/filter all the traffic passing by the first laptop, something like this:
Code: Select all          *---------------------------*           |    LAPTOP 1      |   *--------------* ?           |-----*  *------*  *----*   |       |   INTERNET<------>|wlan0|<-->|MY_APP|<-->|eth0|<---->|ANOTHER LAPTOP|           |-----*  *------*  *----|   |       |           *---------------------------*   *--------------*
I know that in FreeBSD it is possible to use ipfw for that purpose, because it build-in into kernel. We set for example rule Code: Select allipfw add divert 2000 ip from any to 1.0.1.1
and we can use our own application to process those packets, reinject them forward etc. It will work also fast, because as I said, it build into kernel.
Is there any standart Linux-based solution to do the same? I found some info about netmap-ipfw. Is this a correct solution? Or I have to use for example IP-aliases and iptables to do that?
I need to process all the IP-packets, not only TCP/UDP/etc-protocol. Solution also must be very fast.
I have a rather urgent problem with my network, I got two virtual network interfaces one internal and one external. The problem is; I can't get connection to internet. The external NIC is set as a NAT and the internal is... internal.