CentOS 5 :: Fresh Install But Extras Fail
Nov 30, 2009
I have just downloaded and installed the latest version that I know of, Centos 5.4. I initially selected all of the packages and the installations crashed. Since I am installing it on a private network I couldn't save the info. I tried deselecting the packages until finially figuring out the 'extras' was the problem. I deselected that and the installation went fine. What's on the extra's? Part of the error message was something to do with a Python. I have been trying to use Cobbler, is that part of the 'Extras'.
View 1 Replies
ADVERTISEMENT
Jul 9, 2009
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
View 1 Replies
View Related
Jun 8, 2009
i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.
View 5 Replies
View Related
Mar 23, 2010
I have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies
View Related
Dec 9, 2009
I am trying to install CentOS-DS on version 5.4 x86_64. I cannot get to the Extras repo due to lack of wired Internet access. I have wireless (except to server) and I have big UFD drives.
View 1 Replies
View Related
Apr 17, 2009
I decided to do a fresh install of 5.3. I dedcided to use the entire HD for the install and not partition in any special way. I told it to format the HD and use the entire HD for linux OS. Just went thru the install with no additional software added, only what was the default install. After prompting for a user name and password i rebooted as requested. The issue is that i recieve no GUI to login to the desktop. Im able to SSH to the box and i tried doing yum update and it did not fix anything.i want to learn the command line but i need the gui for backup.
View 10 Replies
View Related
May 8, 2010
I cannot boot from the OS dvd. It says looking for boot info on CDDVD then boots right into an older version of windows that happens to be on the hdd. If I unplug the hard drive I can get into the CentOS installer but this is useless because the hdd isn't viewable as a place to install the new OS. I don't know if I need to format the drive before hand so that Cent has a clean slate or if there is a problem with the DVD itself. The later I dont believe so based on the working of the installer while hdd unplugged. The DVD drive is on its own ribbon and both hdd and dvd drive or set to primary master in DOS.
Aside: I have recenlty moved to centOS formally using ubuntu and messing around with fedora on another computer. I am using cent based on work with school, they recommended cent for project with professor.
View 6 Replies
View Related
Aug 13, 2011
I have a vps, and the only way to access my vps is using SSH . putty.
After playing around with my vps, learning how certain stuff works and so on, i somehow messed up my server.
Is it possible to do a fresh install remotely using only putty, and nothing else but putty, of my server with centos 5.6?
View 2 Replies
View Related
Jun 15, 2011
I just upgraded to Fedora 15 this afternoon from the install DVD.
When I try to do an update with the software update app I get an transaction error:
could not add package update for upstart-1.2-4.fc15(i686)updates: upstart-1.2-4.fc15.i686
Here is what rpm reports as being available:
When I tried yumex I get a different error:
View 2 Replies
View Related
Mar 19, 2009
I'm familiar with linux (Debian/Ubuntu), but new to CentOS. I recently installed CentOS 5.2 on a new server for my radio station. I can log in and do everything fine, save connect to any network. I only have a Broadcom wired nic. I know the wire and ethernet jack work fine, so that lead me to the server's settings. I'm not sure if I missed something somewhere, or a similar post (I'm sorry for double-posting if this has been done before).
There is a static IP address set, and that's done correctly.
From what I've seen, someone would like to see /sbin/lspci | grep -i ether: 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express
View 7 Replies
View Related
Feb 1, 2010
I had a fresh install of centos 5.4 x64 on my newly bought lenovo thinkstation D20, the installation went smoothly. after I finished adding users and reboot,I get pass the grub, starting the services, and then.. just blank screen, get nothing there and stuck, can't get into gnome, only option is to power off.the same happens if I install scientific linux, basically same with centos. I also can't boot the scientific linux live cd(the same thing happens, after starting the services, blank screen and stuck). however, I can boot Fedora live cd. but all I want is an EL5.
View 5 Replies
View Related
Apr 1, 2010
I downloaded 5.4 DVD iso, burnt it to DVD and installed it, when booting up it goes through gives loads of green okays, then when going into the GUI (presumably) it shows a blank screen.
I did some googling and found out to run system-config-display, however when I run this the monitor goes blank and does not work, I have tried a few variations of setting the resolution etc. but nothing worked.
View 1 Replies
View Related
Jul 9, 2010
I installed CentOS 5.5 and after the install when the system reboot, it give me a kernel panic error saying that it don't find the drive /dev/sdb4. I didn't install Grub since Ubuntu is already present on the first drive. I let Grub2 OS prober install it in Grub menu. Here is the grub line:
menuentry "CentOS release 5.5 (Final) (on /dev/sdb4)" {
insmod ext2
set root='(hd1,4)'
[code]....
View 3 Replies
View Related
Jan 26, 2011
I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 3 Replies
View Related
Oct 19, 2009
I have just done a reinstall of Centos 5.3 on a dedicated server (via a KVM). My partition arrangement was the default presented to me by the installer:
As you can see, I'm using LVM for everything other than /boot (I need to use LVM for an app I am testing).
On reboot, I get the following:
[QUOTE]
It looks like it can't find vmlinuz-2.6.18-128.el5 in /boot.
I have rebooted using the Centos Install Disk 1 and gone in to rescue mode. Rescue mode mounted my / under /mnt/sysimage, from there I could see that /boot had been mounted from /dev/sda1 as it should be.
However, there was no initrd.image or /vmlinuz-2.6.18-128.el5 under /boot or /boot/grub. Shouldn't the CentOS installer have created these?
Is there anyway I can recover this installation?
View 1 Replies
View Related
Jul 21, 2011
I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.
View 10 Replies
View Related
Jan 20, 2010
I thinking about running SOGO on a separate server. The server should be in a Raid1 configuration and running backups to another server. Firewall??My background is the Windows world and I'm having difficulties understanding exactly what to do, to get everything up and runningTried bits and pieces from the Perfect Server Guide ( Reading the documentation and forums. But I didn't get the big picture.
Objective
-A Centos server up and running with all the software that SOGO needs installed, configured and running
[code]....
View 1 Replies
View Related
Apr 15, 2009
I just finished installing CentOS 5.2 x86_64 on a Dell Dimension 3100 (Pentium 4 with 64-bit support). On the first boot, after completing the final config steps (firewall, SELinux, time server, etc), the boot hangs on "Starting xend:". I have completed a successful installation on another Dell machine (different processor), with the same installation options (I recorded all of the steps and followed them for the second installation).
My boot commands in grub are:
root (hd0,0)
kernel /xen.gz-2.6.18-128.el5
module /vmlinuz-2.6.18-128.el5xen ro root=LABEL=/1 rhgb quiet
module /initrd-2.6.18-128.el5xen.img
View 7 Replies
View Related
Jan 26, 2011
I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 16 Replies
View Related
May 21, 2010
Since I need to install Grace on several lab workstations, I've been working on getting the mirrors.kernel.org fedora 6 extras repo to work. This is what I've done on one workstation: Added to /etc/yum.repos.d/fc6extras.repo:
[fc6-extras]
name = Fedora Extras - 6 - i386
baseurl = http://archive.kernel.org/fedora-archive/extras/6/i386/
enabled = 1
[code]....
then:
yum install grace --enablerepo=fc6-extras
After grace was installed with no errors, I ran:
yum update
Got this dependency problem and would like to know if there is a better solution to what I've done, especially with a hard coded baseurl in the repo file: gstreamer-plugins-bad-0.10.8-4.el5.rf.i386 from installed has depsolving problems --> Missing Dependency: libSoundTouch.so.0 is needed by package gstreamer-plugins-bad-0.10.8-4.el5.rf.i386 (installed)
View 9 Replies
View Related
Jul 13, 2010
Since I need to install Grace on several lab workstations, I've been working on getting the mirrors.kernel.org fedora 6 extras repo to work. This is what I've done on one workstation:
Added to /etc/yum.repos.d/fc6extras.repo:
[fc6-extras]
name = Fedora Extras - 6 - i386
baseurl = http://archive.kernel.org/fedora-archive/extras/6/i386/
enabled = 1
[Code]....
View 2 Replies
View Related
Sep 24, 2010
Can I configure RHEL to use packages from the CentOS Extras repositories?
View 6 Replies
View Related
Nov 20, 2010
Today I was trying to upgrade mysql and php.PhP went well, thats at the latest version, but the mysql went to 5.5x from REMI. This killed all my websites, no DB and worse.Well I typed the wrong this (totally my fault - serious EPIC FAIL)i typed yum remove mysql not downgrade...This removed plesk and a load of other stuff, and now im screwed.
View 1 Replies
View Related
May 14, 2011
I just installed 5.6 using the x86_64 netinstall - all appeared to go well, albeit a little slowly. At the end of the install i rebooted the machine but CentOS won't load. If I select the CentOS option from grub (only other option is 'other') the machine instantly reboots.
Only options selected for install where 'server' and 'server gui'.
Editing the CentOS options shows the following but I've no idea whether this is correct or not (assume it is):
root (hd1,0)
kernel /vmlinuz-2.6.18-238.e15 ro root=/dev/VolGroup00/LogVol00 rhgb initrd /initrd-2.6.18-238.e15.img
View 8 Replies
View Related
Aug 7, 2009
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
View 3 Replies
View Related
Mar 28, 2011
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
View 4 Replies
View Related
Jun 24, 2010
i want to install kubuntu-restricted-extras but i prefer sun-java6 packages over openjdk... how can i exclude openjdk from installing when i install kubuntu-restricted-extras.
View 2 Replies
View Related
Feb 4, 2011
I copied the extras/source/grub folder to my home folder.
I did: ./grub.SlackBuild as su.
The install went on for a long time and I saw warnings etc flash by.
I don't know if it has installed properly. I tried it before and it destroyed my grub menu. I managed to recover grub through LMDE and now, I am back for more!
Is there any way to tell if this app is installed properly before I run grubconfig?
View 10 Replies
View Related
Apr 5, 2009
On a fresh install on a dell 2650: The install goes smooth and on reboot after Nash starts we get
SCSI: 0:1:0:0: timing out command, waited 22s
repeated for two controllers and 16 devices on each controller. Then boots and runs fine.
View 4 Replies
View Related
Mar 14, 2010
I have just finished installing Karmic on new computer. I have already installed java jre, flash plugin, and unrar/rar. My question is can I still install restricted extras to get addition applications installed, without corrupting my apps already installed? Or should I just manually install the remaining items from restricted extras manually?
View 2 Replies
View Related
