how to compile my own kernel for a ibook g4 and when you install it all works, because more and I compile everything but the audio worked, nose on me but I'm not mistaken at the sound card detected. I can do where there is a good manual?where can I get a kernel to this machine and it compiled?
View 1 RepliesI'm trying to install ubuntu on an old iBook G4. I have two cds (9.10 (not PPC specific) and 8.04.1 (the PPC specific version)) along with the G4 install cds. I've tried booting while holding down C, and I've tried to boot holding down option. When the boot menu comes up it does not recognize either one. I've also reset the PRAM.I've read a lot of guides, and look through this very thoroughly. I don't even want to dual boot, just Ubuntu.
View 7 Replies View RelatedI want to install Ubuntu on my ibook G4 (I don't care to have a dual boot) but I can't find a simple and concise set of instructions here.
View 3 Replies View RelatedI was fiddling with trying to get KMS working for about a week till I realized that it was probably broken and decided to drop it and use userspace DRI. Lo and behold, it was faster than I think I've ever gotten out of this model before. I'm aware that KMS supposedly supports the Mobility Radeon chip in this machine, but until I can find an easy way to get it to work, I'm probably going to stick with UMS. That being said, if anybody can get KMS working, I'd LOVE to change the tutorial around a bit.That being said, I'd like to take a moment to address a few things. This is not a tutorial for all iBooks, or all PPC Macs for Lucid. I cannot stress enough that your mileage may vary, and you should not hold me responsible for your individual situation.
View 9 Replies View RelatedI am having trouble finding a live cd to install on an apple g3 ibook. I have 256 mg ram, and want to erase hard drive and install linux. How can I find a live cd to install. I am thinking about debian or slackware.
View 2 Replies View RelatedI have been given an Apple Ibook that wont boot
View 9 Replies View RelatedI thought it would be great to update to the latest version of ppc ubuntu on my old ibook g4, so i did just that. Everything seemed to install correctly, and the broadcom driver was properly detected and downloaded...however...when I connect to my wireless network, I can't get any data flow. No web pages, no connection to empathy...nothing.verything worked so flawlessly in 9.10, and I had just been using the wireless connection before I installed 10.04, so I know the hardware is fine
View 3 Replies View RelatedI have an ibook g3 that I'm trying to resurrect with Ubuntu 10.04. However, booting into live CD always freezes it at some point in the installation process. I got it installed but everything takes five minutes to open. any way to make it faster?
View 4 Replies View RelatedI have an old ibook g4. I was trying to install 10.04 on it. It booted from the cd,but when I installed ubuntu there were 2 or three error messages near the end that it couldnt delete some files. When I restarted, the computer went fine, until it got to a black screen with white text, which said it couldn't find files and said it would reboot in 180 seconds. I let it, and it just ended up the same. Did I trash my computer?
View 2 Replies View RelatedI just installed ubuntu 9.10 on my ibook G4 and now i am wondering: how would i compile .java files and run then in xterm? What packages would i have to install? What commands would i use to do the compiling and the running? Would i use the gcj
View 1 Replies View RelatedI have been running Ubuntu in my iBook/g4 800, 12' inch screen since jaunty and I must confess that I have had a fair share of graphics issue, however, since karmic, my computer would just go off especially when the AC is disconnected then on plugging back the AC, it comes back on but with the windows or the previous items on the screen completely deformed, that kind of deformation you would only blame graphics for. So the deformation stays for long and a reboot is all I'm left with.While still in karmic, i thought an upgrade to Lucid would get things back in place but that never happened, so I have been wondering what to do. I thought of a key combination that would turn on the screen in an iBook but I cant seem to find that through google, so I'm left with just fixing the underlying issue which according to some post on the Internet, wrong graphics settings might cause the monitor to shut down unexpectedly. I don't know exactly what exactly am I supposed to do? If that post is anything to go by, here is my xorg.conf(I know karmic+ does not need this but my system needs it) code...
View 2 Replies View Relatedso after install several different versions of ubuntu on my ibook g4 I finally got xubuntu jaunty up and running. the problem is it wont update anything when i run sudo apt-get update it fails to fetch anything from the repos. also when i go to aplications software sources it wont let me check the important security updates tab at all.I installed ubuntu hardy on my g4 powermac and that runs just fine but it doesn't work correctly on my ibook so i would really like to stick with jaunty but i cant seem to find a solution.here is my sources.list
# deb cdrom:[Xubuntu 9.04 _Jaunty Jackalope_ - Release powerpc (20090423)]/ jaunty main
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
[code]...
So I recently installed Ubuntu 10.04 on my 800 MHz iBook G4 with a Radeon 9200. After messing around with the xorg file, I was able to get compiz working well - but now the only problem I'm having is that scrolling in any window is ridiculously choppy - comparable to scrolling a window of a computer over remote desktop.
View 3 Replies View RelatedI was easily able to install Ubuntu 10.04 (powerpc version) on my old iBook G4 just to see what it was like. After installation, I tried to connect to my Airport Extreme, and it didn't work.
For the past few days, I have been trying to research how to be able to connect to my Airport Extreme, and I have had no luck. Apparently, there is some sort of driver that I have to install called b43-fwcutter, but I have no clue where to find it or how to install it.
Btw, the iBook obviously isn't the only computer I have, so I am able to download necessary packages on other computers, and transport it with USB flashdrives.
after spending more than 48 hours watching the install bar creep along, it has finally finished! but when i boot up my ibook it gos to a black screen and nothing happens.
View 1 Replies View RelatedI have an old iBook G3 12" Dual USB (M7692LL/A) with 128Mb extra of RAM.
I was trying to boot Ubuntu from an external USB DVD and a FW CD drive, and the same thing happened. When I select the disc from the boot select screen and press enter, the colors get funky and it stays like that for minutes!
I installed Ubuntu 10.10 alternate PPC on my iBook G4. I have to used this command upon installation or else it went to white screen which doesn't go away:
install video=ofonly
Installation went smooth till the end.
After reboot, it did prompt me to pick l or c, then yaboot screen appear. However, after I entered 'Linux' and hit Enter, nothing happened - blank screen.
I have a iBook G3 that dosnt want to boot up at all. It makes the ding then a grey screen pops up. How do I install Ubuntu onto my iBook G3 with a external USB harddrive? is there a way?
View 4 Replies View RelatedI have an iBook G3 and about 4 months ago after Mac OSX was corrupted I installed Ubuntu 9.10 on it. During the install the screen was divided and partly blacked out but when I installed it, the resolution was fine and the OS encompassed the whole screen.
After a few weeks everything on the screen started to turn pink until all the colours on the whole screen were a shade of pink! I decided that I would abandon my laptop as I had a fully functioning Ubuntu desktop which was my preferable computer to use anyway.
Following the release of Ubuntu 10.04 I decided that I would try a fresh install on my laptop. When I started the install I was disappointed to find that the screen was divided and everything was shaded pink. I went ahead with the install regardless hoping that everything would be fine once I installed Ubuntu. Once again I was let down, the screen was still divided and pink. I have included some pictures for you to have a look at.
I set up Ubuntu on an old iBook G4, planning to use it as a front end to my main box. Installed 10.04 no problem, and from there, used Software Center to install MythTV Front end. Have done the same thing on a netbook, no problem.
However, on this PPC Mac, the front end works fine, navigation, menus, etc, until I try to play a recorded programme - the screen is blank, and I just get white noise from the speakers.
(BTW am trying Ubuntu as I don't have a Mac OS new enough to get any of the current Mac MythFrontEnd builds working)
I installed ubuntu 9.10 on my ibook g4 that i just bought recently (i hate mac xD) it all went perfect... the only things that im concerned about is if i close the lid it goes to sleep... but when i open it again i only see a black screen with a mouse on it! (hard reboot is required)
i read somewhere that you need to disable dri in a file named xorg.conf but i cant find that file and the topic where i read it was 5 years old so im not sure what to do now xD
I tried to install NVIDIA audio drivers on fc10 (2.6.27.41-170.2.117.fc10.i686).
It ended up in this error.
I am attaching nforce-installer log for your details.
Code:
By default I can use internet (without network drivers installed), how is this possible? And why not audio?
I am trying to install the PPC kernel on an iBook G3. The CDs boot up, however both the net-install and the regular install cd both freeze up after it looks for harddisks. The screen is blue. The box title says
"Loading additional components"
"0%"
"Retrieving lvm2-udeb"
I have no clue what to do. I am trying to get an error readout, but nothing but the power button works. It shuts it off. I check the system clock and it was wrong, but I got it set to the correct time. I don't have and OSX disks. I am wanting a full Linux HD. Please let me know how to trouble shoot. (I have seen that many people have no problem installing this on there macs. The os is still working on the os side, but I want to switch it to Linux.)
since a whole week now i am trying to set up a Debian System on an old Ibook G4, with 1.2 GHz and 768 MB RAM. My Install Media is the Wheezy 8-CD-Set. I am not going to have anything besides Debian on the Notebook.
The Install process works fine until the Installation of the Core System. At the end of this process a window pops up and tells me that the CD with the title Wheezy-CD-1 or something like that is inserted and asks me to insert another CD or DVD now. Up to this point everything seems fine to me, but when i hit the "OK" Button the CD won´t come out of the Notebook, and besides that the Installer freezes. A progress bar, entitled with "executing cdset", is shown at a progress of 25% and does not move, also nothing happens when i try to cancel the process.
Whats the problem with my Installation? I already downloaded a second copy of the first Image and burned it again in case something was wrong with Installation Media, but the problem is still the same.
I have just installed the latest Ubuntu 10.4 LTS on my Macbook Pro and the one thing I cannot get to work no matter how much i try the fixes and suggestions they do not work. I have the volume controls, even the ones on the keyboard work but there is just no audio what so ever.
View 1 Replies View RelatedI have installed it on my Macbook Pro 5.5 via rEFIt+ and the install works well except for the lack of sound. I've seen this issue posted about on the forums and I've followed the advice posted here as best I can with my limited knowledge. Terminal didn't recognise the aptitude (command not found). I guess that may be due to an older build of Ubuntu being used in the example?
View 5 Replies View RelatedI was going to try out Squeeze on my ibook so I downloaded one of the weekly snapshots of the netinstall image and booted the installer. The installer was unable to recognize the ethernet card of my ibook which I found odd since I have used Lenny in the past without having any problems. Does anyone know if this is a bug in the installer or has firmware for my ethernet card been dropped from Squeeze? I searched around and couldn't find any bugs that were specific to PPC with this installer. It is not a deal breaker as I can just install Lenny and then dist upgrade to Squeeze,
View 4 Replies View RelatedI have a macpro 5,1 the tower NOT the laptop people are always making that mistake and for the life of me i cant seem to get any audio through my external speakers.
View 9 Replies View RelatedSystem: MacBookPro5,3 with ubuntu 9.10
kernel: Linux ubuntu 2.6.31-19-generic-pae
soundchip: nVidia Corporation MCP79 High Definition Audio (rev b1), in windows it reports: Cirrus Logic CS4206A (AB 75). Cirrus Logic now is part of nvidia.
I've added ppa mactel repository. and tried the procedure described at:
[url]
It still doesn't work. By compiling from alsa from source, it seems worse, the sound preference even couldn't pick up device. Also in current /usr/share/doc/alsa-base/driver/HD-Audio-Models.txt.gz. I could not find the module name for this nvidia or CirrusLogic device.
I have sound using my headphone without any trick but my internal speakers don't work.
Do some manage to make them work on an iMac 27" i7 and Lucid Lynx?