I have an old iBook G3 12" Dual USB (M7692LL/A) with 128Mb extra of RAM.
I was trying to boot Ubuntu from an external USB DVD and a FW CD drive, and the same thing happened. When I select the disc from the boot select screen and press enter, the colors get funky and it stays like that for minutes!
I'm running into some difficulties installing Ubuntu on an old mac ibook G4 I was given. sepcs are fine (1. something Ghz processor, 700mb RAM)--yet the internal drive and CD player are dead. I installed MAC OS 10.4 PPC on a firewiredrive and boot from there. But how can I install Ubuntu ? I understood that I need to use the non supported PPC version which I downloaded and have burned a CD of. I have an external CD player which works. The Cd's appears in the firewire mac os, and the external FW disk still has 200 Gigs free.I plan to let the instaler choose this freespace to create the partitions, but how do I get to the installer ?
When i boot with the CD in the drive and press C, nothing happens. when I press options / alt, ubuntu the ubuntu install CD doesn't show up I've read that I must use open firmware, and found some key combination, but this doesn't change anything (command, option O F). I have Gparted if the 200gig partition needs to be repartitioned. I'm trying to install Ubuntu as a dual boot on this old ibook G4
I have been given an Apple Ibook that wont boot
View 9 Replies View RelatedI would like to use the VGA-Port for Beamer in "Mirror" Mode how to modify the xorg.conf? I am not familiar with linux configuration.
View 2 Replies View RelatedI'm trying to install ubuntu on an old iBook G4. I have two cds (9.10 (not PPC specific) and 8.04.1 (the PPC specific version)) along with the G4 install cds. I've tried booting while holding down C, and I've tried to boot holding down option. When the boot menu comes up it does not recognize either one. I've also reset the PRAM.I've read a lot of guides, and look through this very thoroughly. I don't even want to dual boot, just Ubuntu.
View 7 Replies View RelatedI thought it would be great to update to the latest version of ppc ubuntu on my old ibook g4, so i did just that. Everything seemed to install correctly, and the broadcom driver was properly detected and downloaded...however...when I connect to my wireless network, I can't get any data flow. No web pages, no connection to empathy...nothing.verything worked so flawlessly in 9.10, and I had just been using the wireless connection before I installed 10.04, so I know the hardware is fine
View 3 Replies View RelatedI have an ibook g3 that I'm trying to resurrect with Ubuntu 10.04. However, booting into live CD always freezes it at some point in the installation process. I got it installed but everything takes five minutes to open. any way to make it faster?
View 4 Replies View RelatedI have an old ibook g4. I was trying to install 10.04 on it. It booted from the cd,but when I installed ubuntu there were 2 or three error messages near the end that it couldnt delete some files. When I restarted, the computer went fine, until it got to a black screen with white text, which said it couldn't find files and said it would reboot in 180 seconds. I let it, and it just ended up the same. Did I trash my computer?
View 2 Replies View RelatedI want to install Ubuntu on my ibook G4 (I don't care to have a dual boot) but I can't find a simple and concise set of instructions here.
View 3 Replies View RelatedI just installed ubuntu 9.10 on my ibook G4 and now i am wondering: how would i compile .java files and run then in xterm? What packages would i have to install? What commands would i use to do the compiling and the running? Would i use the gcj
View 1 Replies View RelatedI have been running Ubuntu in my iBook/g4 800, 12' inch screen since jaunty and I must confess that I have had a fair share of graphics issue, however, since karmic, my computer would just go off especially when the AC is disconnected then on plugging back the AC, it comes back on but with the windows or the previous items on the screen completely deformed, that kind of deformation you would only blame graphics for. So the deformation stays for long and a reboot is all I'm left with.While still in karmic, i thought an upgrade to Lucid would get things back in place but that never happened, so I have been wondering what to do. I thought of a key combination that would turn on the screen in an iBook but I cant seem to find that through google, so I'm left with just fixing the underlying issue which according to some post on the Internet, wrong graphics settings might cause the monitor to shut down unexpectedly. I don't know exactly what exactly am I supposed to do? If that post is anything to go by, here is my xorg.conf(I know karmic+ does not need this but my system needs it) code...
View 2 Replies View Relatedso after install several different versions of ubuntu on my ibook g4 I finally got xubuntu jaunty up and running. the problem is it wont update anything when i run sudo apt-get update it fails to fetch anything from the repos. also when i go to aplications software sources it wont let me check the important security updates tab at all.I installed ubuntu hardy on my g4 powermac and that runs just fine but it doesn't work correctly on my ibook so i would really like to stick with jaunty but i cant seem to find a solution.here is my sources.list
# deb cdrom:[Xubuntu 9.04 _Jaunty Jackalope_ - Release powerpc (20090423)]/ jaunty main
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
[code]...
So I recently installed Ubuntu 10.04 on my 800 MHz iBook G4 with a Radeon 9200. After messing around with the xorg file, I was able to get compiz working well - but now the only problem I'm having is that scrolling in any window is ridiculously choppy - comparable to scrolling a window of a computer over remote desktop.
View 3 Replies View Relatedhow to compile my own kernel for a ibook g4 and when you install it all works, because more and I compile everything but the audio worked, nose on me but I'm not mistaken at the sound card detected. I can do where there is a good manual?where can I get a kernel to this machine and it compiled?
View 1 Replies View RelatedI was easily able to install Ubuntu 10.04 (powerpc version) on my old iBook G4 just to see what it was like. After installation, I tried to connect to my Airport Extreme, and it didn't work.
For the past few days, I have been trying to research how to be able to connect to my Airport Extreme, and I have had no luck. Apparently, there is some sort of driver that I have to install called b43-fwcutter, but I have no clue where to find it or how to install it.
Btw, the iBook obviously isn't the only computer I have, so I am able to download necessary packages on other computers, and transport it with USB flashdrives.
I was fiddling with trying to get KMS working for about a week till I realized that it was probably broken and decided to drop it and use userspace DRI. Lo and behold, it was faster than I think I've ever gotten out of this model before. I'm aware that KMS supposedly supports the Mobility Radeon chip in this machine, but until I can find an easy way to get it to work, I'm probably going to stick with UMS. That being said, if anybody can get KMS working, I'd LOVE to change the tutorial around a bit.That being said, I'd like to take a moment to address a few things. This is not a tutorial for all iBooks, or all PPC Macs for Lucid. I cannot stress enough that your mileage may vary, and you should not hold me responsible for your individual situation.
View 9 Replies View Relatedafter spending more than 48 hours watching the install bar creep along, it has finally finished! but when i boot up my ibook it gos to a black screen and nothing happens.
View 1 Replies View RelatedI installed Ubuntu 10.10 alternate PPC on my iBook G4. I have to used this command upon installation or else it went to white screen which doesn't go away:
install video=ofonly
Installation went smooth till the end.
After reboot, it did prompt me to pick l or c, then yaboot screen appear. However, after I entered 'Linux' and hit Enter, nothing happened - blank screen.
I have a iBook G3 that dosnt want to boot up at all. It makes the ding then a grey screen pops up. How do I install Ubuntu onto my iBook G3 with a external USB harddrive? is there a way?
View 4 Replies View RelatedI am having trouble finding a live cd to install on an apple g3 ibook. I have 256 mg ram, and want to erase hard drive and install linux. How can I find a live cd to install. I am thinking about debian or slackware.
View 2 Replies View RelatedI have an iBook G3 and about 4 months ago after Mac OSX was corrupted I installed Ubuntu 9.10 on it. During the install the screen was divided and partly blacked out but when I installed it, the resolution was fine and the OS encompassed the whole screen.
After a few weeks everything on the screen started to turn pink until all the colours on the whole screen were a shade of pink! I decided that I would abandon my laptop as I had a fully functioning Ubuntu desktop which was my preferable computer to use anyway.
Following the release of Ubuntu 10.04 I decided that I would try a fresh install on my laptop. When I started the install I was disappointed to find that the screen was divided and everything was shaded pink. I went ahead with the install regardless hoping that everything would be fine once I installed Ubuntu. Once again I was let down, the screen was still divided and pink. I have included some pictures for you to have a look at.
I set up Ubuntu on an old iBook G4, planning to use it as a front end to my main box. Installed 10.04 no problem, and from there, used Software Center to install MythTV Front end. Have done the same thing on a netbook, no problem.
However, on this PPC Mac, the front end works fine, navigation, menus, etc, until I try to play a recorded programme - the screen is blank, and I just get white noise from the speakers.
(BTW am trying Ubuntu as I don't have a Mac OS new enough to get any of the current Mac MythFrontEnd builds working)
I installed ubuntu 9.10 on my ibook g4 that i just bought recently (i hate mac xD) it all went perfect... the only things that im concerned about is if i close the lid it goes to sleep... but when i open it again i only see a black screen with a mouse on it! (hard reboot is required)
i read somewhere that you need to disable dri in a file named xorg.conf but i cant find that file and the topic where i read it was 5 years old so im not sure what to do now xD
I'm trying to run Ubuntu off the Livecd but when I start my imac it ignores the cd in the superdrive. Any suggestions?
View 9 Replies View RelatedI have downloaded the 64 bit iso and burned the CD-ROM per the instructions. The CD is verified. When I boot the mac, holding down the C key, I get a menu of options relating to Ubuntu. If I choose the trial run from CD then the CD drive starts up but the screen goes blank and I end up with just a blinking underline cursor in the upper left hand corner of the screen. Does anyone known if one can, and if so how, to boot the live CD on a Macbook Pro 5,2?
View 6 Replies View RelatedI have a MacBook Pro 6,2 that try as I might refuses to boot from live CDs. I have rEFIt installed, and both of the liveCDs I've burnt for 10.10 (32 and 64 bit) do not show up either in rEFIt or when I hold down "option" as my mac boots.
Both CDs will run perfectly as either liveCDs or Installations in Parallels, but I'm looking to (hopefully) someday replace Mac OS entirely with Ubuntu. Being completely unable to see these liveCDs presents a bit of a problem though..
I've got a Macbook Pro with rEFIt and Windows 7 installed (I'm not sure if this is relevant), and I'm running into an issue when I try to boot from the LiveCD or a USB (64 bit, due to 4GB RAM).
If I boot from the CD, the Ubuntu splash shows fine, but I run into the error message:
"(initramfs) Unable to find a medium containing a live file system"
I tried then to boot from the USB using rEFIt, but it just gets stuck at the grey screen with tux. The disk images both are OK.
I wanted to try to Natty 64 on my wife's Macbook Pro 2.1 (Core 2 Duo + ATI X1600) and I got a FAIL.
Indeed the LiveCD doesn't start at all, I don't even get the Try/Install GUI, just a sort of choice:
Code:
1.
2.
Select CD-ROM Boot Type : And a blicking cursor, I have no keyboard control at all, and I can't get something other than switching off the Mac.
in an attempt to demonstrate just how compatible our college Macs are (please hold the tomatoes) I'm trying to install Ubuntu Karmic alongside Mac OS X Leopard and Windows XP Pro SP2. The problem is, I hold down 'C' to boot from the CD, and all I get is a black screen with a flashing DOS-style cursor. If I boot it without holding C, it works just fine, booting into either Mac or Windows (whichever I specified).This is understandably irritating, and I'm trying to figure out the source of the problem.
View 5 Replies View RelatedWhat is a better way to start a dual boot with Windows 7 and Ubuntu 10.04, Wubi or LiveCD?
View 9 Replies View Related