Ubuntu :: 10.04 LTS - Dual Monitor Works Only Sometimes (ATI Multi-desktop)?
May 19, 2011
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore:
At home it *still* works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. Does anyone have any idea for fixing it? I've uninstalled and reinstalled the ATI restricted drivers and that seemed to make it work initially, but it still works just sometimes. This is my xorg.conf currently:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[6]-0" 0 0
Screen "amdcccle-Screen[6]-1" 1280 0
EndSection
[Code]...
View 1 Replies
ADVERTISEMENT
Jul 7, 2011
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW).I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either:
[code]....
View 1 Replies
View Related
Jun 30, 2011
The title says most of it. I've got an Optiplex 755 (Dual 20" Dell Monitors) on my desk at work but have access to a 780 if I want it. The 755 does NOT work with Unity, simply won't handle it. I'm not interested in doing an OS Reinstall and data transfer of all my work stuff if Unity doesn't work (KDE is fine on my 755...well sort of, I have Konsole windows popping up through my Firefox and KRDC windows but that's a somewhat minor issue). Anyone have an Optiplex 780 that they have the most recent Ubuntu installed with Unity running (Dual Screen) without a problem?
View 2 Replies
View Related
Aug 12, 2009
My dual monitor no longer works. I downloaded the new patch for my video card and apparently the NVIDIA GeForce 8800 and Linux do not like each other?
1)Should I just remove the driver?
2)If I did would the old driver pick up because although it had a few faults, at least I could use both monitors after a lil engineering
3)If I were to remove the driver, where would I do it from?
View 5 Replies
View Related
May 3, 2010
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies
View Related
Jan 20, 2011
Im running a wee Aspire One, 1024*600 with an external monitor 1024*768 (maverick desktop edition- 10.10) I have them set up independently, the external is to the right, and above my aspire. I have set this up in the monitors options. But it seems the desktop environment (although not the backgrounds) extend off to the right of my aspire (under the external) and to the left of my external- (above my aspire).
I know that it may be nit-picking, but it is a right pain when I 'loose' stuff on this phantom desktop space. For example- when i move my cursor into one of these spaces- and have to wiggle it about till it pops onto one of the screens. Also- i'd like my screensaver to pop up on both screens, and span them both- not just be repeated on both...
View 9 Replies
View Related
Mar 9, 2010
I am trying to set up dual monitors for lenny but nosuccess for the moment.
They were working fine for the same setup on ubuntu.
Using xrandr I get:
I read that virtual screen size could be the maximum part which is of no use in comparison to the current size.
So setting a virtual part in my xorg does not help much. If the above is right.
I have:
How to get the external monitor work in the extened screen mode.
View 2 Replies
View Related
Feb 21, 2010
I have 2 monitors. I'm using the Nvidia driver in Twinview Mode on the right side. I can move the cursor from one monitor to the next and I can drag applications between the two. I have multiple activities. And the second monitor selected one of those other activities as the background. I'm not sure how this was chosen, or if I have a choice. Anyone know? Do activities affect what is displayed in a dual monitor setting? As I toggle through the activities, the two monitors change, but never to the same one.
When I open an application, it's a guessing game which monitor it appears on. Can I control that?
I know if one clicks the top left corner of an application they can send it "To Desktop" ("all", "Desktop 1", "Desktop 2", etc). If I could assign "Desktop 1" to monitor 1, and "Desktop 2" to monitor 2, I could then use the "To Desktop".
At a minimum, how does one control where applications open in a dual monitor setting?
View 1 Replies
View Related
Jan 7, 2011
how do i configure a designated monitor to be my main desktop when running dual monitors in separate x windows?i cant use twin view, as full screen issues and refresh rates are different.
View 1 Replies
View Related
Jul 20, 2010
I was wondering what is the best package for a desktop computer 64bit, ATI Radeon HD videocard with dual monitor compatibility?Also, I would like to know specs such as an extense forum discussion of the distro and easy dependencies installation such as the yum command.
View 2 Replies
View Related
Jan 30, 2010
I want to buy a laptop with gma 4500hd WHAT I WANT IS
1. 2D AND 3D full support eg compiz, full functional kde4+effects (not to be slow)
2. full hd support
3. oss driver
4. ability for dual head monitor setup
searching in google find out that as fa as it concern the dual head setup there is a limitation on virtual desktop for older gma cards
View 1 Replies
View Related
Apr 6, 2010
have an Nvidia 8400GS installated (one VGA one DVi) and I have two Acer monitors (same size different model) one is attached VGA otehr DVI. The dual graphic seems to work; however, it is MIRRORED! It is not a "spanning" desktop that I would prefer. I tried to install the drive from nvidia but once I try to restart X it won't load and I have to revert back to my backup config which mirrors the desktop on both screens. (I can see myself typing on both screens.
[Code]....
View 1 Replies
View Related
Aug 20, 2010
I have 2 GPUs in my system, a HD4870 and a HD4350. The HD4870 has a Benq 24" and a Dell 17" which are working fine in a multi-display desktop setting (No Xinerama) configured via CCC. On the HD4350 I have a single Samsung 17" which in CCC is listed as '[Unknown Display] Unknown adapter' and cannot be used. How can I get that working properly so I can configure it as an additional screen in this setup?
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection .....
I have tried a few different configurations in Xorg but I don't have a great understanding of the configuration files so I have broken it a few times. I have read through this guide [URL]. It's a guide based on the work around for multiple Nvidia GPUs with a six monitor configuration while still being able to run visual effects without a hitch. But I didn't continue after reading "If you're prepared to use ATI cards, and therefore deal with their drivers, a better option might be to buy an Eyefinity card." Since that is based on the drivers back then I figure maybe it's possible with ATI drivers now. I'm sticking to Ubuntu this time around there is no doubt there so I would really like to get my third monitor working.
View 2 Replies
View Related
May 13, 2010
I have two monitors of different resolutions. Under settings->display the settings for my monitor look like this: [URL]. Ultimately what I want is to set up this kind of configuration: [URL]. But whenever I do, it doesn't work out. When I up after setting the above settings, my configuration ends up like this: [URL]. Any attempt to change the resolution or to change the display type to anything other then clone is simply ignored. If I disable the second monitor I can set my first to the proper resolution. If I try to set the settings to what I want they will stick but the second monitor doesn't actually turn on, and if i try to drag windows that direction it acts like a single display.
I have tried using the ATI control panel to adjust my display, but there seems to be a problem entering it as an administrator.I can load the CCC just fine as a regular user, but when I try as an admin a terminal pops up, I type in my password, and nothing happens. I want to avoid trying to reinstall my display drivers or do anything drastic. In previous versions of linux I would just nano the Xorg.conf file and be done with it, but it seems ubuntu 10.04 LTS doesn't use Xorg, or at least not a Xorg.conf I am used to. I want to set the monitors at their native res and as independent displays, similar to what twin view did for me not to long ago.
View 2 Replies
View Related
Nov 19, 2010
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies
View Related
Dec 10, 2010
Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies
View Related
Apr 1, 2011
I have a dual monitor setup with a nVidia 7300 card. I'm not sure exactly when this started to happen, but it's happened for a couple of years at least. when I'm in one or the other monitor the cursor will sometimes "stick" in that monitor and refuse to go to the other monitor. it'll just 'wrap around' as when I go to the right part of the monitor, it'll then jump to the left side, and vice versa. Also once in awhile, if I'm in one monitor, the cursor will be taken away and put on the other monitor. I'm just now starting to see a few patterns on what's happening. It's worse if I have VCL playing in the left monitor, (my secondary), and I've got a program maximized in the right (primary) monitor. That's when it'll 'stick' on the right monitor. After I roll up the program or minimize it, then it'll free the mouse. But it's not instant. After it's freed, it still doesn't work exactly. If you click on any program on the left monitor, then you have to move back and forth before the mouse will work on the left monitor.
The second problem I'm having happens only on the secondary monitor. At times the precision is WAY off. For example, if I try to put the mouse right on an icon, and click it. It won't work. But if I move the mouse over to the right or left, suddenly the pop-up comment box pops up, the icon is highlighted and clicking will run the program. It can be off as much as 100 pixels! I've seen these problems in all sorts of GUIs; XFCE, DXCE, KDE 3.x (I never tried it in KDE 4.x since it was nearly unusable) and Gnome. Right now I've only see this on Ubuntu 8.04.01, to 9.10 (I never went past 9.10), and at first I thought it was X since all GUIs had problems. But someone now says that nVidia's driver might be to blame. If you can tell me what command to type in at the terminal, I can supply the current video driver's version.
View 8 Replies
View Related
May 18, 2011
I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies
View Related
May 9, 2010
I have not checked for a while but did, before posting this, do a search for multi monitor support with KDE 4.4.4 and found nothing.
From what I understand 11.3 is out sometime next month and KDE 4.4.4 is the KDE environment that will be released with that iteration of SUSe.
About a month ago I read about a number of problems with multiple monitor support under 4.4.4. Primarily these issues seemed to be with no more than 2 monitors. The SUSe 11.2 machine here uses KDE 4.3 runs three monitors (Intel core quad, pair of NVidia PCIe graphics cards). I was wondering whether any of the bugs with this type of configuration have been resolved. From what I understood 4.4.4 worked with problems using Twinview but I was not able to find anything that addressed the configuration of having separate X Screens.
View 9 Replies
View Related
Jan 18, 2011
I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies
View Related
Jun 5, 2011
I have asked about this issue before to no avail but since then I have been able to narrow down the main cause of the crashes. My setup:
HD5770 - Running 2 19" LCD's
HD3300 onboard Running 1 47" lcd
Whenever I am in firefox and have pictures open in the browser and move the mouse to the other 19" monitor it crashes, not everytime but often enough to be annoying. Sometimes when it crashes the screen goes blank and I wind up at the login screen, other times it just goes blank and stays blank.
View 14 Replies
View Related
Apr 1, 2010
Im running 11.2-64 with the stock KDE (3.5) included with the distro. Recently I messed about attempting an update of Amarok and phonon to get the graphic EQ back for music playback. The "messing about" was not with the one click install offered on the KDE website for 4.4.2.....and interestingly the messing about was the day before they "released" 4.4.2-- with the result that I ended up. trashing" the system and having to reload (didnt loose /home tho another reason why I love SUSe....)anyway I ve been looking around and have seen problems mentioned on the KDE forum with multi monitors in their 4.x desktop environment....it is tempting to "just push the button" on the 4.4.2 install and see what happens but Im not sure I want to spend another few hours here repairing things where I have my workspace back.
This machine is used in my home office, a core quad with 2 GB of RAM, Intel motherboard and a pair of NVidia GT 8500 PCIe cards running 3 monitors..... am curious if anyone is using 4.4.2 in a multi monitor environment, how the upgrade went and any problems with X server with the new environment?
View 5 Replies
View Related
Oct 19, 2009
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
View 3 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jan 27, 2011
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
View 5 Replies
View Related
Mar 13, 2009
Many people have multi-core cpus supporting frequency scaling now, if you want to see if the workload is being evenly distributed then add as many CPU Frequency Scaling Monitor applets to the Gnome panel as you have cores/cpus. Then right-click each one and select preferences and choose which cpu to monitor.
Now compile a large program or run a cpu intensive game and watch how the workload dances around between the two (hopefully)
Some clever apps like gnome chess will multi-thread and make max use of both cores, sadly many others won't.
View 9 Replies
View Related
Nov 11, 2010
I use a Dell advanced port replicator at home and in the office. Each is connected to a second monitor. In neither place does the monitor actually receive a signal even though the monitor seems to be detected correctly in display settings. The function-F8 key does not have any visible effect.
Oh, almost forgot. At work once when I preparing to shut down the second monitor popped on for a few seconds though it was at the wrong resolution.
View 6 Replies
View Related
Jul 20, 2010
Using a nvidia graphic card with multi monitor with two monitors. Can I have one with xbmc and other with normal KDE (firefox, xchat, ...).
Can I do this in linux (Slackware)?
View 3 Replies
View Related
May 15, 2010
Does anyone know of an alsa based software multi-band (10 or more) graphic audio frequency equalizer that works with Suse 11.x? To be clear, I don't mean an equalizer within an audio or video player. One that can be used with any sound application, that works between the output of the player and the output plugs on a motherboard or sound card.
View 9 Replies
View Related
Apr 27, 2010
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
View 2 Replies
View Related
