OpenSUSE :: KDE 4.4.2 Upgrade In Multi Monitor System ?
Apr 1, 2010
Im running 11.2-64 with the stock KDE (3.5) included with the distro. Recently I messed about attempting an update of Amarok and phonon to get the graphic EQ back for music playback. The "messing about" was not with the one click install offered on the KDE website for 4.4.2.....and interestingly the messing about was the day before they "released" 4.4.2-- with the result that I ended up. trashing" the system and having to reload (didnt loose /home tho another reason why I love SUSe....)anyway I ve been looking around and have seen problems mentioned on the KDE forum with multi monitors in their 4.x desktop environment....it is tempting to "just push the button" on the 4.4.2 install and see what happens but Im not sure I want to spend another few hours here repairing things where I have my workspace back.
This machine is used in my home office, a core quad with 2 GB of RAM, Intel motherboard and a pair of NVidia GT 8500 PCIe cards running 3 monitors..... am curious if anyone is using 4.4.2 in a multi monitor environment, how the upgrade went and any problems with X server with the new environment?
View 5 Replies
ADVERTISEMENT
May 9, 2010
I have not checked for a while but did, before posting this, do a search for multi monitor support with KDE 4.4.4 and found nothing.
From what I understand 11.3 is out sometime next month and KDE 4.4.4 is the KDE environment that will be released with that iteration of SUSe.
About a month ago I read about a number of problems with multiple monitor support under 4.4.4. Primarily these issues seemed to be with no more than 2 monitors. The SUSe 11.2 machine here uses KDE 4.3 runs three monitors (Intel core quad, pair of NVidia PCIe graphics cards). I was wondering whether any of the bugs with this type of configuration have been resolved. From what I understood 4.4.4 worked with problems using Twinview but I was not able to find anything that addressed the configuration of having separate X Screens.
View 9 Replies
View Related
Nov 11, 2010
I use a Dell advanced port replicator at home and in the office. Each is connected to a second monitor. In neither place does the monitor actually receive a signal even though the monitor seems to be detected correctly in display settings. The function-F8 key does not have any visible effect.
Oh, almost forgot. At work once when I preparing to shut down the second monitor popped on for a few seconds though it was at the wrong resolution.
View 6 Replies
View Related
Mar 21, 2011
Anyone successfully using VNC client on a Mac to control a Debian server?I have the vncserver setup on the Debian machine properly. But I'm having problems connecting to it from both a PowerMac running Tiger and a MacBookPro running leopard.I can connect no problem from a machine running Slack12.2, have not setup port forwarding on my router to connect remotely yet.My Debian machine is running the latest stable release of squeeze with KDE4.I originally tried this with RealVNC Enterprise for OSX but I'm not gonna buy it so I need another alternative after the 30 day trial ends as they have no free version for OSX.
The situation is that I do freelance graphic design on the PowerMac with Cinema4D and Photoshop so I spend most of my time on that machine which is located in my home studio in my attic. Aside from the MacBook and a Dell desktop(family machine)all my other machines and network hardware are in the basement. So to go from the attic to the basement everytime I need to do something on another machine is not practical, and the only other machine I need to access on a regular basis is the Debian box in the basement, this makes the most sense.
I also have a 14 year old living in the house and he's fascinated by all this and will meddle in anything he gets the chance to so all the Linux machines and network hardware need to be behind lock and key.
View 6 Replies
View Related
Jun 5, 2011
I have asked about this issue before to no avail but since then I have been able to narrow down the main cause of the crashes. My setup:
HD5770 - Running 2 19" LCD's
HD3300 onboard Running 1 47" lcd
Whenever I am in firefox and have pictures open in the browser and move the mouse to the other 19" monitor it crashes, not everytime but often enough to be annoying. Sometimes when it crashes the screen goes blank and I wind up at the login screen, other times it just goes blank and stays blank.
View 14 Replies
View Related
Aug 20, 2010
I have 2 GPUs in my system, a HD4870 and a HD4350. The HD4870 has a Benq 24" and a Dell 17" which are working fine in a multi-display desktop setting (No Xinerama) configured via CCC. On the HD4350 I have a single Samsung 17" which in CCC is listed as '[Unknown Display] Unknown adapter' and cannot be used. How can I get that working properly so I can configure it as an additional screen in this setup?
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection .....
I have tried a few different configurations in Xorg but I don't have a great understanding of the configuration files so I have broken it a few times. I have read through this guide [URL]. It's a guide based on the work around for multiple Nvidia GPUs with a six monitor configuration while still being able to run visual effects without a hitch. But I didn't continue after reading "If you're prepared to use ATI cards, and therefore deal with their drivers, a better option might be to buy an Eyefinity card." Since that is based on the drivers back then I figure maybe it's possible with ATI drivers now. I'm sticking to Ubuntu this time around there is no doubt there so I would really like to get my third monitor working.
View 2 Replies
View Related
May 13, 2010
I have two monitors of different resolutions. Under settings->display the settings for my monitor look like this: [URL]. Ultimately what I want is to set up this kind of configuration: [URL]. But whenever I do, it doesn't work out. When I up after setting the above settings, my configuration ends up like this: [URL]. Any attempt to change the resolution or to change the display type to anything other then clone is simply ignored. If I disable the second monitor I can set my first to the proper resolution. If I try to set the settings to what I want they will stick but the second monitor doesn't actually turn on, and if i try to drag windows that direction it acts like a single display.
I have tried using the ATI control panel to adjust my display, but there seems to be a problem entering it as an administrator.I can load the CCC just fine as a regular user, but when I try as an admin a terminal pops up, I type in my password, and nothing happens. I want to avoid trying to reinstall my display drivers or do anything drastic. In previous versions of linux I would just nano the Xorg.conf file and be done with it, but it seems ubuntu 10.04 LTS doesn't use Xorg, or at least not a Xorg.conf I am used to. I want to set the monitors at their native res and as independent displays, similar to what twin view did for me not to long ago.
View 2 Replies
View Related
Mar 13, 2009
Many people have multi-core cpus supporting frequency scaling now, if you want to see if the workload is being evenly distributed then add as many CPU Frequency Scaling Monitor applets to the Gnome panel as you have cores/cpus. Then right-click each one and select preferences and choose which cpu to monitor.
Now compile a large program or run a cpu intensive game and watch how the workload dances around between the two (hopefully)
Some clever apps like gnome chess will multi-thread and make max use of both cores, sadly many others won't.
View 9 Replies
View Related
May 19, 2011
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore:
At home it *still* works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. Does anyone have any idea for fixing it? I've uninstalled and reinstalled the ATI restricted drivers and that seemed to make it work initially, but it still works just sometimes. This is my xorg.conf currently:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[6]-0" 0 0
Screen "amdcccle-Screen[6]-1" 1280 0
EndSection
[Code]...
View 1 Replies
View Related
Apr 1, 2011
I have a dual monitor setup with a nVidia 7300 card. I'm not sure exactly when this started to happen, but it's happened for a couple of years at least. when I'm in one or the other monitor the cursor will sometimes "stick" in that monitor and refuse to go to the other monitor. it'll just 'wrap around' as when I go to the right part of the monitor, it'll then jump to the left side, and vice versa. Also once in awhile, if I'm in one monitor, the cursor will be taken away and put on the other monitor. I'm just now starting to see a few patterns on what's happening. It's worse if I have VCL playing in the left monitor, (my secondary), and I've got a program maximized in the right (primary) monitor. That's when it'll 'stick' on the right monitor. After I roll up the program or minimize it, then it'll free the mouse. But it's not instant. After it's freed, it still doesn't work exactly. If you click on any program on the left monitor, then you have to move back and forth before the mouse will work on the left monitor.
The second problem I'm having happens only on the secondary monitor. At times the precision is WAY off. For example, if I try to put the mouse right on an icon, and click it. It won't work. But if I move the mouse over to the right or left, suddenly the pop-up comment box pops up, the icon is highlighted and clicking will run the program. It can be off as much as 100 pixels! I've seen these problems in all sorts of GUIs; XFCE, DXCE, KDE 3.x (I never tried it in KDE 4.x since it was nearly unusable) and Gnome. Right now I've only see this on Ubuntu 8.04.01, to 9.10 (I never went past 9.10), and at first I thought it was X since all GUIs had problems. But someone now says that nVidia's driver might be to blame. If you can tell me what command to type in at the terminal, I can supply the current video driver's version.
View 8 Replies
View Related
May 18, 2011
I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies
View Related
Jul 7, 2011
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW).I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either:
[code]....
View 1 Replies
View Related
Jan 18, 2011
I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies
View Related
Jul 20, 2010
Using a nvidia graphic card with multi monitor with two monitors. Can I have one with xbmc and other with normal KDE (firefox, xchat, ...).
Can I do this in linux (Slackware)?
View 3 Replies
View Related
Jan 30, 2010
GNOME system monitor is constantly freezing and not responding when i click on first tab 'System' Do somebody knows some workarounds for this issue? It's the same on freshly installed system and also on updated GNOME 2.28 from stable repository.Sometimes on second or third atempt it is working, but i cannot accept such an level of unstability and bugs, discovered on daily basis of testing openSUSE 11.2. There are much more very basic issues in this release which are normal for beta stage, but not for almost 3 moths old system...
View 2 Replies
View Related
Feb 2, 2010
I`m running openSUSE 11.2, with GNOME 2.28 - made a fresh install.
Everything went smooth and nice, and I did not made any changes to my system, when I saw that GNOME System Monitor freezes when clicking on the "System" tab.
View 6 Replies
View Related
Apr 29, 2011
I'm using Slackware 13.1_64 with multi-lib. Now that 13.37 is out I would like to upgrade my system but thought I would ask if there are any problems or considerations for upgrading multi-lib systems ?
View 1 Replies
View Related
May 11, 2010
I have a system with 1 GB RAM. I'm running KDE 4. I created a tab to look that the Physical Memory in the System Monitor program, which I assume appears to look at the same stats that "top" looks at. In that Physical Memory tab I have 3 tables: Used Memory, Free Memory, and Application Memory.The Used Memory table shows that the system is using .94 of .98 GiBytes. The Free Memory table shows that the system has .5 GiBytes of RAM free.
However the Application Memory shows that only 339 M-Bytes of RAM is being used.Note that "top" shows the same info.So where is the other .6 GiBytes of RAM that the Used Memory table shows as being used?If I look at the process table which is supposed to encompass all of the processes running, including the ones for the OS, then it appears to add up to the 339 M-Bytes being used in the Application Memory table. Is the rest of the memory being held in reserve by the OS to be used as needed? If so, then why when another application is opened the Free Memory goes down instead of staying constant?I also noticed this memory "black hole" when I was running 11.0 on a system with 4 GB of RAM. The OS appeared to "take up" a large chunk of memory that was NOT being used by any applications and making it "disappear" - meaning that the applications were using about 1.3 GiBytes of RAM and Free Memory was showing only .7 GiBytes instead of the over 2 GB of RAM that should be free.
View 2 Replies
View Related
Dec 20, 2009
Basically system monitor and the "top" command show 2 cpu cores when I only have 1 (a 3 Ghz P4 on my work computer).
I'm not sure if the two are related but I frequently get 100% CPU usage when running a few programs together (Kile, Firefox, Chrome and okular for example) at which point even the movement of the mouse cursor slows down.
View 2 Replies
View Related
Aug 10, 2010
I just installed 11.3 in one of my computers and I've noticed the resolution was sometimes changing after a reboot. First it was switching from 1280x1025 to 1024x768 with the default deivers, then I thought installing Nvidia propietary drivers would solve the problem, but now is switching between 1280x1024 and 640x480. After several attemps to fix it I found out that the system uses the correct resolution if it starts with the monitor switched on, but falls back to 640x480 if it's off when the system boots, which is almost always since I usually control this pc trough vnc.
I Tryed to specify the available resolutions in xorg.conf, and adding the preferred mode option, but it didn't help. I tryed also to use xrand in .profile to force 1280 resolution, but it doesn't work either (when the system is started with monitor off, xrand only shows 640x480 and 320x240 as available resolutions, and so does the system preferences panel).
Here's the xorg.conf I'm using right now:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
code...
View 7 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Jan 1, 2010
I lost my FC10 and PCLinuxOS 2007. Ubuntu 9.10 64bit is good, as is XP and Vista. What's the repair procedure? My old menu.lst was this:
[code]...
Is it just a matter of editing partition numbers, as the old menu.lst?
View 9 Replies
View Related
Feb 23, 2010
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Quote:
Section "Extensions"
Option "Composite" "Disable"
EndSection
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
View 2 Replies
View Related
May 24, 2010
i recently installed 10.04 after hearing from a colleague that it was highly recommended, however after install, all i get is a black screen with various colors pixels at the tope of the screen. I've been trying to find a resolution, but have nevertheless come up empty, i really need to info that is/was on my desktop (passwords & such).
View 9 Replies
View Related
Jan 8, 2011
I am wanting to upgrade my system from 11.2 to 11.3, but I have been putting it off for a while.I am considering trying either the CLI or GUI methods of upgrading without doing a fresh install but it seems like that is a somewhat shaky method. I know I have read many threads of horror stories, but for all those who have used that method what is the general consensus? I am going to download 11.3 either way just so I can have it in case, but is it worth it to take the time to try a live upgrade? Right now I am leaning toward a fresh install.
View 9 Replies
View Related
Jun 15, 2010
The root filesystem is the filesystem that is contained on the same partition on which the root directory is located, and it is the filesystem on which all the other filesystems are mounted.
In a multi-OS desktop, having Windows, Ubuntu and Fedora, what is the root filesystem as the root directory is located on at least 2 of the OS.
View 8 Replies
View Related
Sep 14, 2009
I've tried searching the forums / google and haven't been able to come up with anything... in Debian-based distros there's an option that can be set to allow boot concurrency so that multiple processor cores can be used for the boot process. Windows also has an option similar to this to specify how many processor cores to use for boot.
Is there an option for multi-core booting in Fedora?
View 1 Replies
View Related
Aug 20, 2010
There are lots of OSs and Linux dists to install on your netbook, and I want to make it as easy as possible to install, remove and switch between them.
Just installing a dist and then another one after it will replace the GRUB boot screen every time, and some dists might override previous GRUB menus entirely.
On a previous machine I created a GRUB partition which chain-loads GRUB for each dist, but now I can't remember how I did it.
The hard drive is currently empty, since I started playing around with repartitioning. What is the easiest way to install GRUB to a partition? Links are welcome, but please no generic "install GRUB" guides because the ones I've found haven't been relevant to my particular situation (empty hard drive, multi boot environment, no CD/floppy)..
View 2 Replies
View Related
Aug 12, 2010
To give a scenario, I have an account for myself, my wife, and my daughter;
1. uRock
2. DragonLady
3. LilFireball
On install I have no problem adding myself back to the system,but when try to add the other users who already have a home folder but no logon, I get an error saying the other accounts are already in use, but they still have no way to log on
View 5 Replies
View Related
Sep 2, 2011
nm-applet won't start after system upgrade with gnome 3.0. NetworkManager version is 0.899 in gnome 3 repo, I read somewhere that it should be 0.9xxx for gnome 3.0. Also got this message "The system network services are not compatible with this version." when trying to run network from system settings.
View 1 Replies
View Related
