My dual monitor no longer works. I downloaded the new patch for my video card and apparently the NVIDIA GeForce 8800 and Linux do not like each other?
1)Should I just remove the driver?
2)If I did would the old driver pick up because although it had a few faults, at least I could use both monitors after a lil engineering
3)If I were to remove the driver, where would I do it from?
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW).I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either:
[code]....
I am running Slackware64 -current. I just upgraded KDE to 4.6.0 from Alien Bob's ktown repo, and upon doing so my battery monitor no longer functions properly. More specifically, the icon will appear in the panel, but when I choose the option to show the charge/discharge state it does not show. The icon only ever shows that the battery is not plugged in to an external power source (showing a plug and a red x). It is important that I get the battery monitor functional once again as I am running my new Slackware64 -current install on a laptop and don't like to be left wondering when my laptop's battery will die and if I need to plug it in.
View 2 Replies View Relatedwhen i installed it the windows 7 Partition no longer works. I can see the windows 7 partition but when i click on it, it just reloads the grub boot loader. Im in college and need the windows 7 partition.
View 5 Replies View RelatedI've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore:
At home it *still* works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. Does anyone have any idea for fixing it? I've uninstalled and reinstalled the ATI restricted drivers and that seemed to make it work initially, but it still works just sometimes. This is my xorg.conf currently:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[6]-0" 0 0
Screen "amdcccle-Screen[6]-1" 1280 0
EndSection
[Code]...
The title says most of it. I've got an Optiplex 755 (Dual 20" Dell Monitors) on my desk at work but have access to a 780 if I want it. The 755 does NOT work with Unity, simply won't handle it. I'm not interested in doing an OS Reinstall and data transfer of all my work stuff if Unity doesn't work (KDE is fine on my 755...well sort of, I have Konsole windows popping up through my Firefox and KRDC windows but that's a somewhat minor issue). Anyone have an Optiplex 780 that they have the most recent Ubuntu installed with Unity running (Dual Screen) without a problem?
View 2 Replies View RelatedThis is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
I have tried searching for the same problem but can't find it. Close but not exact. I have a dell optiplex I use for internet surfing. I do a reformat every few months to get the junk off it.I do a reformat to clean the drive and load XP PRO then load ubuntu 7. or 8. It gives me the option to use either at start up.
I did it a few weeks ago and it has been running fine until I did updates of both XP and ubuntu. When I it fired it up Win XP worked fine but when I choose ubuntu I would get the corrupted or missing hal.dll error and it wouldnt go any further. Several reboots with the same result XP works but not ubuntu.I did a reinstall of the hal.dll file using XP disk for repair according to britec on ..... (but I didn' t do the second step yet).Now I still get the corrupted or missing hal.dll error when I try to get into ubuntu and if I choose XP it freezes. I try going into safe mode and it loads but (wireless) mouse/keyboard won't work.
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies View RelatedIs there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies View RelatedOne monitor is working fine but the display is not coming on other monitor. I guess no problem in monitor because I swapped the cable to check the individual monitor. When I try to install the new driver its giving GCC-VERSION-CHECK while installing. And I do not think I have to install the new driver because it has already one. What should I do to configure the dual monitor. Do I have to edit any configuration file.
My system configuration details are below.
Redhat version : Redhat Enterprise Linux WS release 3 (Taroon update 4)
Driver in SRBC 26: NVIDIA-LINUX-x86_64-1.0-7664-pkg2.run
Nvidia card model : Quadro fx p171
Bios version of Nvidia : 4.35.20.23.07
p/n : 900-50171-0400-0000K
600-50171-0002-201J
Running ubuntu 8.10 on a toshiba equium l20.
I have avast anti virus installed and it has been fine, but yesterday i downloaded updates for it and since then whenever i try to run the program i get an error and it refuses to run.
I had a Dell E6400 laptop with a nVidia controller. Is anyone know how to set it up to a dual monitor?
View 2 Replies View Relatedi loaded the YUM suggested by fedora and adobe. the install went well and worked during that time during the next and all restarts after the flash player no longer works infact all websites requiring flash say it si not even installed. I tryed to reinstall it and it said it is already installed and to cancel.
View 1 Replies View RelatedFor some reason, just shortly ago, the terminals, konsole, etc. will not accept the lowercase letter 'e' as input for some reason, not even when pasting, e.g.
a paste of file:///usr/share/applications/kde4/konsole.desktop
becomes fil:///usr/shar/applications/kd4/konsol.dsktop
on the command line. Weird.
For everything else I have tried at this point on the computer, the lowercase letter 'e' is just fine (this message being an example);Has some configuration file for terminals (konsole, xterm, Yakuake) or whatever got messed up and I need to correct it?
I just updated my system to a new kernel with the update manager and now my WICD no longer obtains an IP address. Everytime I try it says "Connection Failed: Unable to get IP address".It was working fine before and even when I reboot into an older kernel it still doesn't work.I'm using a Belking Wireless G adapter.I would have tried downloading another network manager but since I can't even access the internet I'm stuck with changing current settings and nothing seems to work.
View 4 Replies View RelatedI made a USBbootdisk and installed 10.04 the day the final release came out. I installed it, used this post install guide http://blog.thesilentnumber.me/2010/...de-what-to.htm, and it has been working like a charm since then. When I went to log on to it today, the log in screen comes up as normal, I enter my password, ubuntu thinks about it for a minute, and then sends me right back to the log in screen.
I have an Asus EeePC 1005, dual booting Windows 7 Starter/Ubuntu 10.04
I just want to see if this is fixable before I wipe the partition and reload ubuntu.
Have recently updated 10.04 with latest updates which included a new kernel and the printer no longer works. In-fact I can't even define the printer and I don't have a printer installed, the install script can't locate the printer on the USB. I have a cannon MP640.
I can print OK through windowsXP on virtualbox, printer is found OK.
Everything was fine until latest update.
Also my USB TV card doesn't work anymore, it also was OK before the update.
I installed Lucid several days ago, and have just noticed that SCIM no longer works. I need it for Japanese input, but cannot turn on Anthy. The manual is either nonexistent or extremely terse with a lot of presupposed knowledge.I've installed German, Russian and Spanish language support, along with CJK. I can't even get the SCIM tool to pop up now---except ONCE!Simply reinstalling using Synaptic overlays the existing problem(s), and does not resolve any issues.SCIM may be conflicting with the desktop Switcher applet? Actually, SCIM seems to be conflicting with other Gnome desktop shortcuts, as well
View 1 Replies View RelatedUbuntu, been using windows for years and now use Mac. I have Ubuntu running on a netbook at work and all of a sudden my wireless connection not only doesn't work, it doesn't seem to exist! Wired still works fine, but the wireless option has vanished. How do I reset or restore or whatever it takes to get my wireless working again?
View 1 Replies View RelatedI've been using Back in Time on Maverick (originally on Karmic) for some time but in the last couple of weeks I haven't been able to make new backups. Here's my output:
Code:
[REDACTED: ~]$ backintime -b
Back In Time
[code]...
I installed virtualbox a couple of days ago and had used Windows 7 (guest) multiple times without anproblems. However, upon attempting to share folders, it will no longer boot and I get this error:
p, li { white-space: pre-wrap; } "Failed to open a session for the virtual machine Windows 7.
The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1."
Details:
[code]....
There is something strange going on with Pidgin in Debian 6. I have just installed the system, then Pidgin, then configured my MSN accounts and chatted; but after rebooting, it no longer works. It just hangs while trying to connect - this is what I see from strace:
[Code].....
- a largish number of times. My very rough and ready thoughts about this so far are that it is probably not Pidgin that has an error, since 1) It worked initially, and 2) I am pretty sure the developers would have know about it very quickly if this was a general problem in Pidgin. On the other hand, my networking seems otherwise to be fine - s what is going on here?
Fedora 9 used to support a timed login via the gdm program. This feature no longer works with the gdm that comes with Fedora 13 (gdm-2.30.2-1.fc13.i686 ). I made modifications to /etc/gdm/gdm.schema as follows:
[code]...
Is there something else I have to change now?
I upgraded my openSUSE 11.2 KDE to version 11.3, and now my Canon Pixma ip1800 Printer no longer prints. It appears to me that the upgrade may have removed one or more files that the printer needs, but I don't know.
View 6 Replies View RelatedI have new install of 11.4 X86_64 which has been working fine up until this morning. Now when I boot and get the kdm login screen, the keyboardis no longer working, nothing appears from typing, no key sequences are recognized. The mouse works fine and when I go Console Login, the keyboard works fine.The mouse and keyboard are both Logictech wireless using the Logitech unifying usb link. As I said, it was working fine until this morning.I have no idea how to even diagnose this.
View 8 Replies View RelatedSince upgrading to OpenSuSE 11.3 I no longer have sound.I remember having the same prob upgrading to 11.2, but for the moment, I'm at a loss.
View 8 Replies View RelatedI recently upgraded from 9.04 to 9.10 and the sound on my machine no longer works. I was previously using the OSS for sound. I'd like the sound solution that requires the minimal effort and I don't necessarily need to run OSS again. Ubuntu is installed on a Dell Optiplex 960.
Code:
aplay -l
results in:
Code:
aplay: device_list:223: no soundcards found...
[Code].....