I want to buy a laptop with gma 4500hd WHAT I WANT IS
1. 2D AND 3D full support eg compiz, full functional kde4+effects (not to be slow)
2. full hd support
3. oss driver
4. ability for dual head monitor setup
searching in google find out that as fa as it concern the dual head setup there is a limitation on virtual desktop for older gma cards
I was successful in getting the ATI catalyst software to set the displays to maximum resolution. The second display is dark. It shows a white "X" cursor if I move the mouse to the second screen. The KDE desktop configuration manager does not recognize the second monitor.
Here is the output of: cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" 1920 0
[Code].....
I'm building another desktop. This is not a gaming system (though some video does cross my path), it's primary focus is as an application development platform. The thing is based on a SuperMicro two CPU motherboard with a couple intel multi-cores, 16GB RAM, a hardware RAID, and CentOS 5.6 (64bit). To this mix I would like to add a solid dual-head graphics card. Something that will support a couple HP LP2465 monitors (not new but functioning well). Speed of rendering is not my biggest concern, stability and "real estate" (the monitors are 1920x1200 and I want all of it).
I've looked a little at the Matrox items and started researching nVidia, but would like to hear opinions from those "in the know".The motherboard, though a solid performer, may have just made this trip unnecessary. It has a quirk that I hadn't considered before. It has several PCI-X slots (64-bit @ 133MHz) but only one "PCI-Express 1 (x8) on a (x16) slot". Does that seem a little strange to anyone else? Not that there is just one PCI-E but that it will fit a x16 board but will only support x8 connections...
I have 2 monitors. I'm using the Nvidia driver in Twinview Mode on the right side. I can move the cursor from one monitor to the next and I can drag applications between the two. I have multiple activities. And the second monitor selected one of those other activities as the background. I'm not sure how this was chosen, or if I have a choice. Anyone know? Do activities affect what is displayed in a dual monitor setting? As I toggle through the activities, the two monitors change, but never to the same one.
When I open an application, it's a guessing game which monitor it appears on. Can I control that?
I know if one clicks the top left corner of an application they can send it "To Desktop" ("all", "Desktop 1", "Desktop 2", etc). If I could assign "Desktop 1" to monitor 1, and "Desktop 2" to monitor 2, I could then use the "To Desktop".
At a minimum, how does one control where applications open in a dual monitor setting?
Is there a simple way to have both of the monitors on a system enabled? The video cards are both older ATI cards. One is a Radeon 9000 AGP 64MB, and the other is quite a bit older (ATI 3D Rage Pro 2x). When Ubuntu 10.10 is booting up, the splash screen appears nicely on the left-side monitor, and then the final desktop appears on the right-side monitor, but when I go to system --> preferences --> monitors, only one monitor is available. I'm guessing the right monitor is fed by the Radeon (I can check if it matters). If the splash screen appears on the left side when booting, why isn't that display available after the bootup has completed?
View 1 Replies View RelatedI'm using gnome in a dual-head setup with individual desktops. Is there any way to "jump" to another monitor using the keyboard only? Now the only method I know is to move the mouse pointer to the another screen and click on something there. Can I do something like that without using the mouse?
View 3 Replies View RelatedI am trying out conky for the first time and rather enjoying it. I have a small frustration though. I have a dual head setup and would like to have identical conky's showing on both monitors. I have tried creating two .conkyrc's (.conkyrc1 & .conkyrc2) and then using:-
Code:
$ conky -c config1
$ conky -c config2
to launch them, this results in only one of the two conky's displaying. I did at first think that maybe they were on top of eachother, but one conkyrc is set bottom_left, the other bottom_right so they should not be right??
When I try to run them as above terminal shows:-
Code:
gregg@burt:~$ conky -c config1
Conky: invalid configuration file 'config1'
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: forked to background, pid is 7017 .....
#NETWORK
${font Sans:size=9:weight=bold}${color grey}NETWORK ${hr 2}$color${font Sans:size=8:weight=bold}
${color grey} DOWNLOAD UPLOAD
${downspeedgraph eth0 30,115 000000 00ff00} ${alignr}${upspeedgraph eth0 30,115 000000 ff0000}$color
Processes 8 & 9 do not appear in my conky, just blank space between 7 & 10?? Also, the swap %age displays 'No swap%'?
I've been troubleshooting a friends computer and we've pretty well hit a brick wall. The issue at hand is the video card will not output properly. To be specific, it's an NVidia card with both DVI and VGA ports. We want it to output via the VGA and ignore the DVI because there's nothing plugged in there (the monitor we want to use doesn't support DVI). At any rate, the only time we can get the VGA to work is when we have another monitor plugged into the DVI port and dual head the system. When we do this it also adds an extra "Unknown Monitor" to the display panel. When we just use the DVI the extra "monitor" disappears. now we don't want to have monitor sitting here useless just so we can use the vga out, but there seems little else to do. We tried installing the Nvidia proprietary drivers through the software manager and yum and it failed both ways.
This is really frustrating because it seems like it should be such a simple thing but nothing works. Does anyone else have similar issues? is there something i can do to fix this? I apologize if i've not provided enough info, but ask and i'll post anything you need to diagnose.
I want to be able to change the settings for my top down dual head display. Basically one monitor sits on top of another right now. How it was setup before was that they used to sit right next to each other so when you mouse over to the right it would go to the new screen. The problem is now when one sits on top of the other I want to be able to just mouse up instead of mousing over to the right. I don't want to use the gui to be able to do this. I want to find out what config file and specifically what setting in the config file would allow me to change this.
View 2 Replies View RelatedI am attempting to get a Dual Monitor Display using aticonfig (and/or manual editing my xorg.conf file). My graphics card (a Radeon HD 4350 with latest ati drivers ) has only a single output but I am using a splitter cable to connect it to two monitors.
I am want one monitor to be 1600x1200 and the second monitor to be 800x600.
This is the command I had tried to no avail.
aticonfig -fq --initial --dtop=horizontal,reverse --resolution=0,1600x1200,1280x1024,1024x768 --mode2=800x600
What am I missing? Should I be using this configuration utility? Or should I be trying to manual edit my xorg.config? All the information I have been able to find seems specific to Dual Head Displays.
EDIT: It occurs to me to post my edited xorg.conf file
Quote:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
[Code].....
I have my computer set up to use separate x screens for both of my monitors and almost everything works perfectly. With this set up I don't have any problem displaying flash in full screen on either monitor like I had with twinview. I have it set up this way so that I can use my TV to display mythtv and still use my computer monitor to browse the web, etc. The only problem is that I use my iphone with hipporemote to give me a wireless keyboard/mouse. When using twinview this was not a problem as it was just one large desktop spread over two monitors.
However, switching to separate x screens seems to have broken the functionality of the vnc server. When using my physical keyboard and mouse I can just move the cursor off the side of monitor 1 to control monitor 2, however, if I'm connected via vnc the cursor gets "trapped" inside the active monitor. I can interact with each screen as expected but if I want to switch the mouse/keyboard focus to the other monitor I have to go to the computer and move the mouse to the desired monitor, which obviously defeats the purpose of using the iphone as a wireless remote.
So my question is this. Is there a way to assign a hotkey combination to switch the focus of keyboard and mouse that the vnc server is controlling? Or could I set the vnc server to only control one of the two x screens?
I'm a newbie to installing LINUX (was an Oracle DBA for many years) and I am having trouble getting the dual head function to work with my Sony Vaio laptop. I just select a generic LCD with the screen resolution that I want, but when I startx, I briefly get the login window (terminal), then everything goes blank and I have to unplus the samsung monitor and reboot to be able to have a screen again. I have tried the fn + f keys and that doesn't help.
Here is the hardware:
Samsung Syncmaster 2343BWX
Sony Vaio VGN-FJ170
Intel Graphics Mobile 915GM/GMS/910 GML Express graphics controller
I would like to use this laptop as:
Audio streaming from internet (so far not working on my local NPR stations)
Hooked up to KVM switch - using the Samsun monitor and an adesso integrated keyboard
Wireless network (that is working - but it took some doing....)
What files and logs I need to post I will do so, but if what I want to do is just not possible or a big hassle, please just let me know, and I will load windows. Although I really wanted one LINUX box in my home office.
I'm using kde 3.5.10 on a Debian Lenny with xorg from backports and nvidia proprietary driver (195.36.15) on my laptop. Nowadays I have received a 2nd monitor, end my purpose is to attach it to my laptop. TwinView or separate X screen work fine but clone or extended view modes for my mind are not so usefull. I think there is the possibility to assign one virtual desktop to one monitor and another adjacent virtual desktop to the second monitor. how to obtain this kind configuration.
View 2 Replies View RelatedI am wondering if it is possible to have programs remember which monitor they were last placed on when re-opening them?
View 1 Replies View RelatedJust installed Debian 8, coming from Ubuntu12, it seems I cannot get my dual monitors to work as it should.
I want two monitors side by side, currently I have two identical outputs. I looked around a bit and register two possible problems.
root@bigcem101-debian:/home/bigcem101# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.00*
800x600 0.00
640x480 0.00
720x400 0.00
Hence, problem 1: it is as if there is only one monitor detected. Then I tried to look for Xorg.conf ..... and: problem 2 xorg.conf is not there. This seems to be normal but when I installed my Ubuntu years ago it was still there and one could manually set things. There must be something new I am missing.
Card:
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
It seems I have both ati and radeon installed.
root@bigcem101-debian:/home/bigcem101# X -configure
(EE)
Fatal server error:
(EE) Server is already active for display 0
I am clueless.
In this particular example I am using NoMachine's NX, although the behaviour also occurs when running VNC for instance. I'd like to connect from my laptop (1 physical screen), to my desktop at work (2 physical screen) via NX. It all works but the following problem occurs: When I connect with my laptop to my desktop I (almost) always am connected to the 2nd physical screen, whereas all windows appear on this first screen. I can interact with my desktop, use the task manager etc, see which windows are running, but any application I start, starts on the first screen (which I cannot see) and for the life of me I cannot move them from screen1 to screen2 without dragging them (which obviously is impossible since I only see screen2).The obvious workaround is: *before* you connect disable the second screen via the display manager but for me this is a non-pratical work around because it requires a lot of actions before heading home. how I can connect from a single-head desktop to a dual-head desktop without crippeling my desktop experience?
View 2 Replies View RelatedI have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies View RelatedI'm having a rather hard time getting my 3 monitors setup as one display. I can get all three to work without too much heartburn using 3 separate X instances. The monitors are on 2 different video cards, one dual heads. The other on it's own card.
I've tried countless ways to get this to work, and I'm just not feeling the love. There are 2 17 inch monitors on the 1 video card and then the second video card has a 24 inch monitor on it. I can get the two monitors on one head to work with twinview, but the third one is left out.
The physical configuration looks like this..
17inch on the left of the 24 inch monitor, and another 17 inch monitor on the right, with the 24 inch monitor being in the center.
I'm going to include my current xorg.conf and lspci.
xorg.conf
Code:
harry@ubuntu:~$ cat /etc/X11/x
xinit/ xkb/ xorg.conf xorg.conf.backup
harry@ubuntu:~$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
[Code].....
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
I would like to know how to monitor dual nic cards graphically in real time. I want to be able to see the traffic of each port separately.
View 3 Replies View RelatedI am trying to set up dual monitors for lenny but nosuccess for the moment.
They were working fine for the same setup on ubuntu.
Using xrandr I get:
I read that virtual screen size could be the maximum part which is of no use in comparison to the current size.
So setting a virtual part in my xorg does not help much. If the above is right.
I have:
How to get the external monitor work in the extened screen mode.
Can any recommend a PCIe video card for my AMD64 box?Looking for one which basically has a good working driver:
- can do dual head using DVI and VGA output.
- open source preferably, I've used the nvidia proprietary one before, was fine but kernel upgrades became a pain.
- passive heatsink so it's silent, doesn't need to be a fast card since my other two were both onboard graphics.
- driver can do KMS for nifty high res console.
- most typical features work, so Mplayer plays nicely and can scale to full screen etc. (xv output +/- accelerated decoding)
- even a bit of light 3D for openarena or compiz would be nice.
- don't mind buying second hand if they aren't available new
I've had a Nvidia 7050 on board which was ok, fast enough, but upgrading with the proprietary driver became painful, and that motherboard is dying a flaky death.
- The nouveau driver looked promising, but wasn't really in Debian at that stage. But I did once accidently boot a high res console while testing a brand new kernel (2.6.31 I think) and was blown away Currently got an ATI RS880 [Radeon HD 4200] on board which is fine, 2D is fast enough, but the open source driver isn't finished yet. It can't do dual head (horrible distortion and crashes), can't suspend to ram (freezes), Xvideo and any form of 3D acceleration are missing.
I have two monitors, my laptop screen, and an LCD monitor. I want to configure linux to put one virtual desktop on one, and a second on another. I'm using Compiz as well, so I'd like it to show one side of the cube on each monitor. I'm not really sure how to go about setting this up though. My attempts so far have stretched the same desktop across both monitors, or resulted in an unusable monitor that just sits there with the default background. While I was trying to figure this out I came across something called XRandR that lets you connect/disconnect monitors without restarting xserver. I'm not sure how to get this going either, the only tutorials I found were for intel chipsets, and I'm using the proprietary NVidia drivers.
View 9 Replies View RelatedI am running Fedora 13 on a PC I built myself - MSI motherboard 785-E53. It has onboard DVI which my primary monitor is hooked to. I added an older 17" CRT to the onboard analog output and the main desktop with my icons and panels immediately switched to the CRT. Kernel is 2.6.34.7-66.fc13.i686, lspci -v says VGA compatible controller ATI Technologies Inc RS880 (Radeon HD 4200). How can I get flatscreen on the DVI output to be the primary?
View 10 Replies View RelatedI created a dual monitor setup in Slack 13.37 using the KDE systemsettings -> Monitor Setup function. (Sadly I had to rebuild ~/.kde in the process, but that's a different story.)
I verify that ~/.kde/share/config/krandrrc contains the new monitor setup (both screens active). I have saved a startup session with krandrtray running. However, when I logon, the system always starts with both screens in clone mode. I always have to go into systemsettings or krandrtay and redo the dual monitor configuration.
Is there a better way? Do I have to create a suitable xorg.conf (which I will try when I get home) or is there another way to boot into the dual config automatically?
I currently run a Windows 7 Compaq laptop with an Athlon x2 and 4gig of DDR2. I want to either set up a dual-boot on my laptop, or make Linux the Primary with Windows running in something like a virtual box. I am very much into Android and I want to learn Linux as a result of that. So which Distro should be considered in a situation like this.
View 6 Replies View RelatedI found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies View RelatedI loaded Lucid on my system, dual booting w/ win7. I have two monitors, and i need it to have extended desktop view. How do i enable this?
Here is my LSPCI
Right now my monitor dislay is not want i wanted.
I'm using the proprietery nvidia drivers on 11.04. I have a dual monitor setup with xinerama. The login screen appears to work fine, I can move my mouse between screens, and only one screen (right) has the login prompt. When I login, both screens show the same thing. While I can move my mouse across, I can only interact when it's on the left side.
I found this: [url], but I cannot start the display settings in the XFCE control center due to "missing randr extentions". Yesterday, I was using Kubuntu 11.04 on this same machine, and the dual monitor setup worked fine.
I've never even set up a virtual desktop on Windows so I'm not sure where to start. I noticed that there's a menu in Ubuntu to set this up, but I followed the instructions (can't remember what they were off hand) and it said that the computer was only accessible through a LAN. I want to leave the Ubuntu machine (my laptop) at home and be able to access it through my desktop (Win7) in college (long story but I don't think that matters). It's possible to do this, right? How would it be done? I understand that LogMeIn doesn't work with Linux, so I'm guessing I have to use Ubuntu's default virtual desktop program and a Windows program like TightVNC, but I'm not sure how to make the laptop accessible from something other than a local network.
View 4 Replies View Related
