Ubuntu :: Multi Monitor With Nvidia 7300 Card

Apr 1, 2011

I have a dual monitor setup with a nVidia 7300 card. I'm not sure exactly when this started to happen, but it's happened for a couple of years at least. when I'm in one or the other monitor the cursor will sometimes "stick" in that monitor and refuse to go to the other monitor. it'll just 'wrap around' as when I go to the right part of the monitor, it'll then jump to the left side, and vice versa. Also once in awhile, if I'm in one monitor, the cursor will be taken away and put on the other monitor. I'm just now starting to see a few patterns on what's happening. It's worse if I have VCL playing in the left monitor, (my secondary), and I've got a program maximized in the right (primary) monitor. That's when it'll 'stick' on the right monitor. After I roll up the program or minimize it, then it'll free the mouse. But it's not instant. After it's freed, it still doesn't work exactly. If you click on any program on the left monitor, then you have to move back and forth before the mouse will work on the left monitor.

The second problem I'm having happens only on the secondary monitor. At times the precision is WAY off. For example, if I try to put the mouse right on an icon, and click it. It won't work. But if I move the mouse over to the right or left, suddenly the pop-up comment box pops up, the icon is highlighted and clicking will run the program. It can be off as much as 100 pixels! I've seen these problems in all sorts of GUIs; XFCE, DXCE, KDE 3.x (I never tried it in KDE 4.x since it was nearly unusable) and Gnome. Right now I've only see this on Ubuntu 8.04.01, to 9.10 (I never went past 9.10), and at first I thought it was X since all GUIs had problems. But someone now says that nVidia's driver might be to blame. If you can tell me what command to type in at the terminal, I can supply the current video driver's version.

View 8 Replies


ADVERTISEMENT

Slackware :: Using A Nvidia Graphic Card With Multi Monitor With Two Monitors?

Jul 20, 2010

Using a nvidia graphic card with multi monitor with two monitors. Can I have one with xbmc and other with normal KDE (firefox, xchat, ...).

Can I do this in linux (Slackware)?

View 3 Replies View Related

Debian Hardware :: How To Install Nvidia 7300 Gt Video Card Driver

Sep 7, 2014

I use a debian testing, I can't drive graphics card,open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?

View 5 Replies View Related

OpenSUSE Hardware :: Nvidia Card Change 7300 To Geforce 275 - Get The New One To Be Recognized

Feb 3, 2010

I changed my old video card for a newer in order to use all the resolution of my screen 1920X1200 and not 1920X1080, in my just installed 11.2, rebooted and got to log in graphic mode,looks good. But isn't. It is working because the new card is seen as the old !How can I get the new one to be recognized, and acces the newresolution ?

View 1 Replies View Related

Debian Multimedia :: KDE Compositing Broken With Nvidia Geforce 7300 GS?

Sep 9, 2011

I just tried to install KDE in Debian testing on the machine with Nvidia Geforce 7300 GS using Nvidia driver (280.13-1). However KDE breaks when compositing is enabled, and the only way to make it work is to disable compositing. This problem seems to exist for a while already:[URL].. Is it really Nvidia's problem, or something with KDE? Is there a point in contacting Nvidia about it?

View 4 Replies View Related

OpenSUSE Hardware :: Nouveau Video Driver For GForce 7300 Card In 11.4 With KDE

Jun 13, 2011

I would like to use Nouveau rather than NVidia proprietary drivers. I am very experienced with Linux but a bit clueless with monitors. I got rather close to a working setup, but just can't get the resolution and maybe H/V sync frequency of my monitor correct.

My system:

OpenSUSE 11.4 32-bit
Gforce 7300
KDE desktop
Acer 21" LCD monitor, non-wide screen, it can do 1600x1200

X configuration: No x.org.conf file, and only one modified file in xorg.conf.d, namely to specify the driver "nouveau" (by the way, is that even needed??) According to lsmod, nouveau loads perfectly. However, KDE starts-up in an odd, non-useful screen resolution. 3d works, slowly, which is OK. I specifically want 1024x768 resolution, but am not able to specify a different resolution in the Display configuration section of the KDE control center (I understand that is perhaps normal).

I tried inserting text into the xorg.conf.d/50-monitor, not really knowing what to add or where and eventually got 1024x768 but the display was unstable, blinking off and on every so-often, and the screen edges were off.I am pretty sure I simply need to put information about my monitor and desired resolution into some file(s) in xorg.conf.d/ or maybe build a dreaded xorg.conf file. I know of the "cvt" utility, and I have a hunch this is part of the solution.

View 9 Replies View Related

Hardware :: ATI Multi Card Multi Display Xinerama Composite

Jun 24, 2011

I have an ATI Radeon HD 3300 on-board video chipset, and an ATI Radeon HD 4350 PCI card. What I want is to have both displays available from one mouse/keyboard. I want to play media on one and have the other as my main desktop.The problem is that with Xinerama enabled, KDE desktop effects do not work (KDE says XComposite and XDamage are not available, even though I explicitly enabled them as extensions in the xorg.conf file), and performance is quite bad. Without Xinerama enabled, performance is great, desktop effects work great, but there's a lot of trouble with full-screen video, and the KWin window manager does not apply in the second display (although I can run a second instance of KWin on :0.1).

View 2 Replies View Related

Fedora Hardware :: F12 Upgrade - NVidia Card - Dual Monitors - Only One Monitor

Nov 26, 2009

I used preupgrade to upgrade from F11 to F12. In F11, I used the proprietary nVidia drivers from rpmfusion, and they worked well. I have refrained from installing the nVidia drivers in F12, because of the problems reported for users of KDE. I removed my old xorg.conf, which has references to the nVidia driver and to "TwinView," the proprietary method of managing two screens, so as to let X discover both monitors.

Now, however, my second monitor stays black, even though xrandr and KDE RandR show both monitors correctly. Xorg.0.log shows the nouveau driver is loaded. (I also tried to create a new xorg.conf following guidelines from the web, but many of the guidelines are from before xrandr, and I'm not confident I have it right yet.) It seems that X believes I have two monitors, because I can drag a window off into the blackness (and it's never heard from again!) I know that the hardware is working, because I just booted into Windows 7, and I could see the desktop on both windows.

How do I convince X and KDE to display on both monitors?

View 2 Replies View Related

CentOS 5 Hardware :: Dual Monitor Video Card - NVidia Quadro FX 580?

Nov 24, 2010

I have repeatedly installed CentOS 5.5 64-bit on a Dell T3500 with an nVidia Quadro FX 580, in an attempt to get dual monitor support to work to no avail. Everything works fine when just one monitor is plugged in and I do not try to enable or plug in a second monitor. I have installed the Dell DKMS, and the Dell recommended drivers (from Dell site) on one installation, I installed the nVidia drivers (from nVidia site) on another, and have tried with what CentOS loads by default on another. The results are the same every time: When I reboot as directed I get a black screen. I can recover by hard shutdown and unplugging one of the monitors, but that doesn't solve my problem. Has anyone had a similar experience, or have any helpful guidance? I am not very Linux savvy. This is for multiple machines in a corporate environment.

Information for general problems.

== BEGIN uname -rmi ==
2.6.18-194.26.1.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==

[Code]...

View 3 Replies View Related

Ubuntu Multimedia :: Multi Monitor Configuration With Two ATI GPU

Aug 20, 2010

I have 2 GPUs in my system, a HD4870 and a HD4350. The HD4870 has a Benq 24" and a Dell 17" which are working fine in a multi-display desktop setting (No Xinerama) configured via CCC. On the HD4350 I have a single Samsung 17" which in CCC is listed as '[Unknown Display] Unknown adapter' and cannot be used. How can I get that working properly so I can configure it as an additional screen in this setup?

Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection .....

I have tried a few different configurations in Xorg but I don't have a great understanding of the configuration files so I have broken it a few times. I have read through this guide [URL]. It's a guide based on the work around for multiple Nvidia GPUs with a six monitor configuration while still being able to run visual effects without a hitch. But I didn't continue after reading "If you're prepared to use ATI cards, and therefore deal with their drivers, a better option might be to buy an Eyefinity card." Since that is based on the drivers back then I figure maybe it's possible with ATI drivers now. I'm sticking to Ubuntu this time around there is no doubt there so I would really like to get my third monitor working.

View 2 Replies View Related

Ubuntu :: Multi Monitor Support (Different Resolutions)

May 13, 2010

I have two monitors of different resolutions. Under settings->display the settings for my monitor look like this: [URL]. Ultimately what I want is to set up this kind of configuration: [URL]. But whenever I do, it doesn't work out. When I up after setting the above settings, my configuration ends up like this: [URL]. Any attempt to change the resolution or to change the display type to anything other then clone is simply ignored. If I disable the second monitor I can set my first to the proper resolution. If I try to set the settings to what I want they will stick but the second monitor doesn't actually turn on, and if i try to drag windows that direction it acts like a single display.

I have tried using the ATI control panel to adjust my display, but there seems to be a problem entering it as an administrator.I can load the CCC just fine as a regular user, but when I try as an admin a terminal pops up, I type in my password, and nothing happens. I want to avoid trying to reinstall my display drivers or do anything drastic. In previous versions of linux I would just nano the Xorg.conf file and be done with it, but it seems ubuntu 10.04 LTS doesn't use Xorg, or at least not a Xorg.conf I am used to. I want to set the monitors at their native res and as independent displays, similar to what twin view did for me not to long ago.

View 2 Replies View Related

Ubuntu Multimedia :: Disable Secondary Monitor Quickly Other Than Loading Up Nvidia-settings And Disabling The Monitor Every Time?

Jun 29, 2010

Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.

Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.

View 1 Replies View Related

Ubuntu :: 10.04 LTS - Dual Monitor Works Only Sometimes (ATI Multi-desktop)?

May 19, 2011

I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.

But since a while it doesn't work properly anymore:

At home it *still* works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. Does anyone have any idea for fixing it? I've uninstalled and reinstalled the ATI restricted drivers and that seemed to make it work initially, but it still works just sometimes. This is my xorg.conf currently:

Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[6]-0" 0 0
Screen "amdcccle-Screen[6]-1" 1280 0
EndSection

[Code]...

View 1 Replies View Related

Ubuntu :: Multi Monitor Setup With 2 Graphics Cards

May 18, 2011

I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.

View 1 Replies View Related

OpenSUSE :: 11.3 And KDE 4.4.4 Multi Monitor Support ?

May 9, 2010

I have not checked for a while but did, before posting this, do a search for multi monitor support with KDE 4.4.4 and found nothing.

From what I understand 11.3 is out sometime next month and KDE 4.4.4 is the KDE environment that will be released with that iteration of SUSe.

About a month ago I read about a number of problems with multiple monitor support under 4.4.4. Primarily these issues seemed to be with no more than 2 monitors. The SUSe 11.2 machine here uses KDE 4.3 runs three monitors (Intel core quad, pair of NVidia PCIe graphics cards). I was wondering whether any of the bugs with this type of configuration have been resolved. From what I understood 4.4.4 worked with problems using Twinview but I was not able to find anything that addressed the configuration of having separate X Screens.

View 9 Replies View Related

OpenSUSE Hardware :: Nvidia 19.29-22.1 Suse 11.3 Dual Monitor Mouse Flickers When Moved To 2nd Monitor?

Jan 15, 2011

just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010

[code].....

View 9 Replies View Related

General :: Ubuntu 10.04 LTS - Dual Monitor Works Only Sometimes (ATI Multi-desktop)

Jul 7, 2011

I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW).I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.

But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either:

[code]....

View 1 Replies View Related

Ubuntu Multimedia :: Running A Multi Monitor Setup With Xinerama?

Jan 18, 2011

I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.

View 6 Replies View Related

Fedora :: F15 Still Crashes On Multi Monitor Setup

Jun 5, 2011

I have asked about this issue before to no avail but since then I have been able to narrow down the main cause of the crashes. My setup:

HD5770 - Running 2 19" LCD's
HD3300 onboard Running 1 47" lcd

Whenever I am in firefox and have pictures open in the browser and move the mouse to the other 19" monitor it crashes, not everytime but often enough to be annoying. Sometimes when it crashes the screen goes blank and I wind up at the login screen, other times it just goes blank and stays blank.

View 14 Replies View Related

OpenSUSE :: KDE 4.4.2 Upgrade In Multi Monitor System ?

Apr 1, 2010

Im running 11.2-64 with the stock KDE (3.5) included with the distro. Recently I messed about attempting an update of Amarok and phonon to get the graphic EQ back for music playback. The "messing about" was not with the one click install offered on the KDE website for 4.4.2.....and interestingly the messing about was the day before they "released" 4.4.2-- with the result that I ended up. trashing" the system and having to reload (didnt loose /home tho another reason why I love SUSe....)anyway I ve been looking around and have seen problems mentioned on the KDE forum with multi monitors in their 4.x desktop environment....it is tempting to "just push the button" on the 4.4.2 install and see what happens but Im not sure I want to spend another few hours here repairing things where I have my workspace back.

This machine is used in my home office, a core quad with 2 GB of RAM, Intel motherboard and a pair of NVidia GT 8500 PCIe cards running 3 monitors..... am curious if anyone is using 4.4.2 in a multi monitor environment, how the upgrade went and any problems with X server with the new environment?

View 5 Replies View Related

Slackware :: 64 Multi-lib And Nvidia Graphics?

Aug 13, 2010

I'm just about to install Alien Bob's multi-lib packages for Slackware64. Everything looks easy, but I've got a question about this part of the instructions:

Quote:

After installing the -compat32 packages, you may have to re-install your binary Nvidia or Ati video X.Org drivers. These driver packages contain both 64bit and 32bit libraries to be maximally useful on a 64bit multilib OS. If you installed the driver files for both architectures, the mesa-compat32 package will overwrite some of the 32bit library files.

On the other hand, if you originally only installed the 64bit driver libraries for your Nvidia/Ati card, it is recommended after installation of the multilib packages, to re-install the binary driver package. This time, choose to install the 32bit driver files as well.

The graphical 32bit applications that you are going to run on your multilib installation will require these 32bit driver libraries. Crashes are likely to occur if you fail to install the correct files.

Right now, I'm on pure 64-bit Slackware64-13.1, and I'm using the Nvidia driver from Slackbuilds.org (along with the nvidia-kernel and libvdpau packages from there too).

So:Do I have both 32- and 64- bit bindary drivers installed as part of the package from Slackbuilds.org?
Could I avoid all this hassle by simply not installing the mesa-compat32 package?
If I do need to reinstall the Nvidia binary driver, do I just upgradepkg --reinstall nvidia-driver-195.36.15-x86_64-1_SBo.tgz?

View 14 Replies View Related

Fedora :: Dynamically Monitor Multi-core Cpu In Gnome?

Mar 13, 2009

Many people have multi-core cpus supporting frequency scaling now, if you want to see if the workload is being evenly distributed then add as many CPU Frequency Scaling Monitor applets to the Gnome panel as you have cores/cpus. Then right-click each one and select preferences and choose which cpu to monitor.

Now compile a large program or run a cpu intensive game and watch how the workload dances around between the two (hopefully)

Some clever apps like gnome chess will multi-thread and make max use of both cores, sadly many others won't.

View 9 Replies View Related

Ubuntu :: Multi-Monitors: Can ATI + Nvidia Video Cards Co-Exist

Apr 8, 2011

As described in further detail below I am looking for some help in Ubuntu 10.10 with a multi-monitor + multi-gpu setup using both ATI and Nvidia video cards installed within the same system (que scoffs and jeers). Is it possible to sucessfully run both ATI and NVidia GPU's and Drivers simultaneously in Ubuntu 10.10 (think multi-monitor environment)? I am asking b/c I am having trouble figuring out how to manage my video cards - particularly ATI - within a multi-monitor + multi-gpu video card environment.

Here's the setup:

Ubuntu 10.10 Maverick Meerkat
x2 - NVidia 6800XT SLi GPU's + 2 DVI outputs/per card (Serviceable card for my needs)
x1 - ATI Rage XL PCI Card + 1 VGA output (Yes, ancient hardware...I know)

[code]....

View 4 Replies View Related

OpenSUSE Hardware :: Triple Monitor Setup: X Crashes When Moving To The Second Graphics Card (third Monitor)

Oct 22, 2010

This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).

This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.

View 3 Replies View Related

Ubuntu Multimedia :: Old Video Card, Nvidia XFX 7800GT Now Beginning To Fail - Which Way Is Best, ATI Or Nvidia?

May 3, 2010

I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).

I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?

View 9 Replies View Related

Ubuntu Installation :: How To Install Nvidia Drivers For Nvidia 8800 GT Video Card

Apr 3, 2011

I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal

1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..

2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"

3.) Stuck don't know what to do.

View 4 Replies View Related

OpenSUSE Hardware :: Multi-Monitor Not Working Via Docking Station?

Nov 11, 2010

I use a Dell advanced port replicator at home and in the office. Each is connected to a second monitor. In neither place does the monitor actually receive a signal even though the monitor seems to be detected correctly in display settings. The function-F8 key does not have any visible effect.

Oh, almost forgot. At work once when I preparing to shut down the second monitor popped on for a few seconds though it was at the wrong resolution.

View 6 Replies View Related

Ubuntu :: Uninstall The Nouveau Driver And Install NVIDIA-x86-71.86.14-pkg1.run For Old Nvidia TNT2 Card?

Nov 30, 2010

Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:

Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.

View 3 Replies View Related

Networking :: Multi Ip In One Ethernet Card?

Apr 24, 2010

can one ethernet card support multiple ip address? but i think it's very dangerous. if bad guy take many ip, other people can't get ip. "does one ethernet card take multiple real ip or multiple virtual ip(one real ip)?" if it takes multiple real ip, then how it works good?..

View 7 Replies View Related

OpenSUSE Hardware :: Short Freeze's On Machine's With Nvidia-Card & Nvidia-Driver?

Aug 8, 2010

The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.

System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved