Fedora :: F15 Still Crashes On Multi Monitor Setup
Jun 5, 2011
I have asked about this issue before to no avail but since then I have been able to narrow down the main cause of the crashes. My setup:
HD5770 - Running 2 19" LCD's
HD3300 onboard Running 1 47" lcd
Whenever I am in firefox and have pictures open in the browser and move the mouse to the other 19" monitor it crashes, not everytime but often enough to be annoying. Sometimes when it crashes the screen goes blank and I wind up at the login screen, other times it just goes blank and stays blank.
View 14 Replies
ADVERTISEMENT
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
May 18, 2011
I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies
View Related
Jan 18, 2011
I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies
View Related
Mar 13, 2009
Many people have multi-core cpus supporting frequency scaling now, if you want to see if the workload is being evenly distributed then add as many CPU Frequency Scaling Monitor applets to the Gnome panel as you have cores/cpus. Then right-click each one and select preferences and choose which cpu to monitor.
Now compile a large program or run a cpu intensive game and watch how the workload dances around between the two (hopefully)
Some clever apps like gnome chess will multi-thread and make max use of both cores, sadly many others won't.
View 9 Replies
View Related
Jul 17, 2010
I am currently booting 4 flavors of Linux - Ubuntu 10.04, Xubuntu 10.04, Linux Mint 9 KDE RC and Linux Mint 9 Gnome. There is so little difference between Ubuntu Gnome with the right packages installed and Linux Mint 9 it is redundant and I would like to replace it with Fedora 13 and try that out for a while. I understand that Fedora still uses a legacy Grub while the others are all using Grub2. I also understand that the two bootloaders do not get along. Is there a way to do that? How? If I have Fedora install its legacy Grub to the Fedora partition will Grub2 see Fedora and update itself properly? I'm open to starting clean if that would simplify things.
View 4 Replies
View Related
Jun 29, 2010
I upgraded to FC13 via yum and use KDE. As soon as I attached a second monitor KDE crashes. I can still boot into Gnome but would like to keep my KDE.
View 6 Replies
View Related
Jun 23, 2011
I'm looking to set up a server with attached mass storage device and tape autoloader to run linux. It's set up under Windows at the moment. Goal is to have users, connecting from individual workstations and laptops, backup their data to the linux server. On their personal machine, some users run linux, some MacOS, some Windows. I plan to set up the 5 500 GB drives as RAID5. I understand that if setting up as software raid the format is "physical volume for RAID". Under this setup, will Windows users be able to read/write and function as expected? I can't assume only linux user access.
View 3 Replies
View Related
Mar 9, 2009
I would like to set up Kdump in case my machine crashes (and it still does frequently) to send the message to putty running on my windows machine (or to my other server running fedora 8).
My preference goes to the windows machine, but I have no clue how to set it up. Is it possible to get the "screen dump" on my windows putty?
My server crashes downloading torrents at high speeds (which is kind of what I want to do)
View 2 Replies
View Related
May 9, 2010
I have not checked for a while but did, before posting this, do a search for multi monitor support with KDE 4.4.4 and found nothing.
From what I understand 11.3 is out sometime next month and KDE 4.4.4 is the KDE environment that will be released with that iteration of SUSe.
About a month ago I read about a number of problems with multiple monitor support under 4.4.4. Primarily these issues seemed to be with no more than 2 monitors. The SUSe 11.2 machine here uses KDE 4.3 runs three monitors (Intel core quad, pair of NVidia PCIe graphics cards). I was wondering whether any of the bugs with this type of configuration have been resolved. From what I understood 4.4.4 worked with problems using Twinview but I was not able to find anything that addressed the configuration of having separate X Screens.
View 9 Replies
View Related
Dec 27, 2010
I am running Fedora 13 on a PC I built myself - MSI motherboard 785-E53. It has onboard DVI which my primary monitor is hooked to. I added an older 17" CRT to the onboard analog output and the main desktop with my icons and panels immediately switched to the CRT. Kernel is 2.6.34.7-66.fc13.i686, lspci -v says VGA compatible controller ATI Technologies Inc RS880 (Radeon HD 4200). How can I get flatscreen on the DVI output to be the primary?
View 10 Replies
View Related
Apr 1, 2010
Im running 11.2-64 with the stock KDE (3.5) included with the distro. Recently I messed about attempting an update of Amarok and phonon to get the graphic EQ back for music playback. The "messing about" was not with the one click install offered on the KDE website for 4.4.2.....and interestingly the messing about was the day before they "released" 4.4.2-- with the result that I ended up. trashing" the system and having to reload (didnt loose /home tho another reason why I love SUSe....)anyway I ve been looking around and have seen problems mentioned on the KDE forum with multi monitors in their 4.x desktop environment....it is tempting to "just push the button" on the 4.4.2 install and see what happens but Im not sure I want to spend another few hours here repairing things where I have my workspace back.
This machine is used in my home office, a core quad with 2 GB of RAM, Intel motherboard and a pair of NVidia GT 8500 PCIe cards running 3 monitors..... am curious if anyone is using 4.4.2 in a multi monitor environment, how the upgrade went and any problems with X server with the new environment?
View 5 Replies
View Related
Aug 20, 2010
I have 2 GPUs in my system, a HD4870 and a HD4350. The HD4870 has a Benq 24" and a Dell 17" which are working fine in a multi-display desktop setting (No Xinerama) configured via CCC. On the HD4350 I have a single Samsung 17" which in CCC is listed as '[Unknown Display] Unknown adapter' and cannot be used. How can I get that working properly so I can configure it as an additional screen in this setup?
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection .....
I have tried a few different configurations in Xorg but I don't have a great understanding of the configuration files so I have broken it a few times. I have read through this guide [URL]. It's a guide based on the work around for multiple Nvidia GPUs with a six monitor configuration while still being able to run visual effects without a hitch. But I didn't continue after reading "If you're prepared to use ATI cards, and therefore deal with their drivers, a better option might be to buy an Eyefinity card." Since that is based on the drivers back then I figure maybe it's possible with ATI drivers now. I'm sticking to Ubuntu this time around there is no doubt there so I would really like to get my third monitor working.
View 2 Replies
View Related
May 13, 2010
I have two monitors of different resolutions. Under settings->display the settings for my monitor look like this: [URL]. Ultimately what I want is to set up this kind of configuration: [URL]. But whenever I do, it doesn't work out. When I up after setting the above settings, my configuration ends up like this: [URL]. Any attempt to change the resolution or to change the display type to anything other then clone is simply ignored. If I disable the second monitor I can set my first to the proper resolution. If I try to set the settings to what I want they will stick but the second monitor doesn't actually turn on, and if i try to drag windows that direction it acts like a single display.
I have tried using the ATI control panel to adjust my display, but there seems to be a problem entering it as an administrator.I can load the CCC just fine as a regular user, but when I try as an admin a terminal pops up, I type in my password, and nothing happens. I want to avoid trying to reinstall my display drivers or do anything drastic. In previous versions of linux I would just nano the Xorg.conf file and be done with it, but it seems ubuntu 10.04 LTS doesn't use Xorg, or at least not a Xorg.conf I am used to. I want to set the monitors at their native res and as independent displays, similar to what twin view did for me not to long ago.
View 2 Replies
View Related
May 19, 2011
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore:
At home it *still* works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. Does anyone have any idea for fixing it? I've uninstalled and reinstalled the ATI restricted drivers and that seemed to make it work initially, but it still works just sometimes. This is my xorg.conf currently:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[6]-0" 0 0
Screen "amdcccle-Screen[6]-1" 1280 0
EndSection
[Code]...
View 1 Replies
View Related
Apr 1, 2011
I have a dual monitor setup with a nVidia 7300 card. I'm not sure exactly when this started to happen, but it's happened for a couple of years at least. when I'm in one or the other monitor the cursor will sometimes "stick" in that monitor and refuse to go to the other monitor. it'll just 'wrap around' as when I go to the right part of the monitor, it'll then jump to the left side, and vice versa. Also once in awhile, if I'm in one monitor, the cursor will be taken away and put on the other monitor. I'm just now starting to see a few patterns on what's happening. It's worse if I have VCL playing in the left monitor, (my secondary), and I've got a program maximized in the right (primary) monitor. That's when it'll 'stick' on the right monitor. After I roll up the program or minimize it, then it'll free the mouse. But it's not instant. After it's freed, it still doesn't work exactly. If you click on any program on the left monitor, then you have to move back and forth before the mouse will work on the left monitor.
The second problem I'm having happens only on the secondary monitor. At times the precision is WAY off. For example, if I try to put the mouse right on an icon, and click it. It won't work. But if I move the mouse over to the right or left, suddenly the pop-up comment box pops up, the icon is highlighted and clicking will run the program. It can be off as much as 100 pixels! I've seen these problems in all sorts of GUIs; XFCE, DXCE, KDE 3.x (I never tried it in KDE 4.x since it was nearly unusable) and Gnome. Right now I've only see this on Ubuntu 8.04.01, to 9.10 (I never went past 9.10), and at first I thought it was X since all GUIs had problems. But someone now says that nVidia's driver might be to blame. If you can tell me what command to type in at the terminal, I can supply the current video driver's version.
View 8 Replies
View Related
Nov 11, 2010
I use a Dell advanced port replicator at home and in the office. Each is connected to a second monitor. In neither place does the monitor actually receive a signal even though the monitor seems to be detected correctly in display settings. The function-F8 key does not have any visible effect.
Oh, almost forgot. At work once when I preparing to shut down the second monitor popped on for a few seconds though it was at the wrong resolution.
View 6 Replies
View Related
Jul 7, 2011
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW).I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either:
[code]....
View 1 Replies
View Related
Jul 20, 2010
Using a nvidia graphic card with multi monitor with two monitors. Can I have one with xbmc and other with normal KDE (firefox, xchat, ...).
Can I do this in linux (Slackware)?
View 3 Replies
View Related
Mar 23, 2011
I need some help getting my dual monitors working in Fedora 12. I've tried some things from other posts and a few things from various websites and wikis (Gentoo), but nothing I've done has worked. To be honest, I can barely remember what I've tried and what I haven't anymore, because I feel like I've gone in circles.The card has one DVI out and I'm using a DVI-splitter to connect the two monitors. This configuration works on my Windows 7 boot. Also, the second monitor is detected, but shows no display.
View 1 Replies
View Related
Jan 25, 2010
Anyone know how to configure multi domain in openSUSE 11.2?
View 9 Replies
View Related
Oct 20, 2010
i have a laptop and i plunged an external monitor into it. I want to obtain a virtual desktop[ I will privede more debugging info below
video card
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
Driver:open source radeon driver distribution kubuntu 10.04
I tried this:
xrandr --output LVDS --mode 1280x800 --pos 0x0 --output VGA-0 --mode 1920x1080 --right-of LVDS --pos 1280x0
it resulted this error 1
xrandr: screen cannot be larger than 1920x1920 (desired size 3200x1080)
Googling about this error i found a old post,it could be outfated that sugested editing xorg.conf. I created a xorg.conf using "Xorg -configure" and i modified the screen section to this:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
[Code].....
View 3 Replies
View Related
Jun 11, 2011
I need some help to setup a simple 2 screens extended desktop. From my laptop with an nvidia card, it was very easy and done in seconds. But with my new desktop loaded with amd hardware, it's turning into a nightmare. I've posted on details of my hardware and of this problem here, and I'm encountering new trouble. Since then, my xorg.conf has changed a little without success:
[Code]...
View 1 Replies
View Related
Mar 14, 2011
I have successfully set up a multi-seat configuration using 2 nvidia cards with 2 instances of X running at the same time. Thing is now, I can't access my external hard drive or any usb thumb drives I plug in. Normally when they would just open up after I plug them it, I get an error saying "unable to mount, Not Authorized". How I can regain access to this? I am using Linux Mint 10
View 6 Replies
View Related
Jun 14, 2010
Here's my scenario:
I want it so any inbound traffic from dsl goes back out the dsl and same for rogers. I've been searching and playing with many docs with no luck.
Anyone know how I do this? The multiple routes are on the same device br0. (which I think is causing all my havoc)
View 1 Replies
View Related
May 13, 2010
First off, let me say: I'm a long time Linux hobbyist and recently installed Fedora 12. I've been looking (some say "lurking") around these forums for a bit after I loaded it up and let me say: Leigh, You're an amazing young man! Keep up the great work! I've a question: I've just put together a hobby computer: Pentuim 4, with 1 Gig of RAM and a Nvidia Geforce5700LE. When I install Fedora from a fresh install, everything works great: nice screen resolution, good graphics, etc. but no 3d or acceleration, so I'm very limited on my programs.
So I decided I need to upgrade my Nvidia driver. I followed Leigh's Nvidia setup guide after installing Fedora 12 (all four steps!) everything seemed to go fine, but when I reboot, I quickly see the Nvidia splash screen, but the screen then goes blank. Well, not really blank, I can see what appears to be a kind of cross-hatch pattern, plus I can see what should be my mouse cursor on screen (it also is a square shaped pattern). I suspect it may be at a screen resolution that my monitor doesn't support. Once there, the computer pretty much doesn't do anything else. Usually I can break into the x driver loading and go to the command prompt, but this latest time I can't even do that.
View 10 Replies
View Related
Dec 30, 2010
along with Aiptek, Hanwang, N-trig, Waltop, & WizardPen (Ace Cad, KYE Systems, UC-LOGIC) Tablets Last updated: July 24, 2011 Preliminaries
1) You must have X server 1.8 or up (Maverick has 1.9).
[Code]...
View 9 Replies
View Related
Jan 4, 2010
I have an Asus eee901 netbook and it's got an Intel 945 graphics card. If I boot it up, log in, attach an external monitor and then open the Display Settings dialog the screen goes black and the laptop appears to crash. Leaving it for a minute or two does nothing.
However, if I boot up with the external monitor attached then I can open the Display Settings dialog and configure both screens.
This is quite annoying as I've got to reboot if I want to connect an external monitor.
Additionally, if booted with the monitor attached and I choose a configuration where the width of the combined screens is greater than 2048, the screens go black and the same lock up appears to occur. Could it be that the Display Settings dialog isn't checking for the maximum display width the driver supports and is then crashing in both scenarios?
View 3 Replies
View Related
Jul 6, 2009
Last friday I went home from work and just turned off my monitor, as a program I had written needed to run a durability test over the weekend. Unfortunately it seems that the moment I turned off my monitor, Linux just froze, quite evidently as it said this morning that the time was still Friday 17:13.
From the syslog I got the following on that time:
What this means and what I can do? It's not the first time it crashes as soon as I turn my monitor off.
View 3 Replies
View Related
Feb 3, 2010
I am facing some issues with my openSUSE 11.2 installtion. Yesterday i installed win 7 so the grub is now wiped out. I have also taken mbr backup in USB. I tried following things to make things work.[/HTML]
1) Repair using openSUSE DVD booted using DVD then automatic repair but it couldn't find any root partition. After showing error that no root partition found it crashes to a blue screen with advanced configurations from there i was able to use shell but cant see and mount any linux partitions. i tried mounting the root partition it gave the error :"please load module ext4dev before mounting" how can i install grub without losing my present installations.
2) Tried booting with Ubuntu & kubuntu 8.04 live cd .. both gave a error and refused to boot. then tried openSolaris which failed to detect the USB drive so couldnt restore the GRUB to /dev/hda.
View 9 Replies
View Related
