Kernel 2.6.21.5, Slackware 12.0 When I run alsaconf, the first thing it does is to say Quote: If ALSA is already running, you should close all sound apps now and stop the sound driver. By apps I understand things like aplay, mpg321, etc. Am I right? So stopping them is no problem: symply do not run them. But how do I stop the sound driver?
View 1 RepliesI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
I have configured my sound drivers many times. After doing this i am able to listen a sound. But after booting there is necessary to configure them again. So is there a any way for permanent configuration.
View 2 Replies View RelatedI have configured my sound drivers several time. But after booting there is no sound.
View 9 Replies View RelatedI am working on getting into driver development in Linux, I am developing a driver for the Hanvon GraphicPal drawing tablet.I have started writing a driver that actually detects the device when it is plugged in, so far thats all it does, it needs a lot more work. However, testing it is really hard because when I plug in the device normally, it gets picked up by usbhid or hidraw (not sure which), so the only way to get my driver to pick it up is to unload usbhid ("sudo rmmod usbhid") and then plug in the device. However, unloading usbhid kills my usb keyboard... which, as you can imagine, makes typing difficult, making it hard to develop drivers or even to reload usbhid. So is it possible to stop that specific device from being picked up by usbhid or hidraw and only by my driver?
View 2 Replies View RelatedI've tried some workarounds like adding an audio entry in the registry but it did not work. I think that the problem is related with the pulseaudio driver...
View 3 Replies View RelatedWe have a Lynksys wmp300n networking card and wants it to work with her new 64-bit system (Ubuntu 9.10). One of the files needed to use it in ndiswrapper was not on her CD and isn't available from their web site. After a few days, I found a Compaq driver .exe that contains the file and thought I was home free. The problem now is that I can't make the broadcom driver the system defaulted to to stop being used. My steps were:
sudo apt-get install network-manager
sudo ndiswrapper -i ~/Desktop/bcmwl5.inf
***//got a -> couldn't find "BCMWL564.SYS"
sudo ndiswrapper -r bcml5
***//got the sys file from a divers for a Compaq card I found a link to
sudo ndiswrapper -l
***//got nothing back
sudo ndiswrapper -i ~/Desktop/bcmwl5.inf
sudo ndiswrapper -l
[Code]....
* Now at this point I don't understand why the b43-pci-bridge driver is still being used nor what to do about it. Edit-> Not sure why it added asterisks in place of my false spaces that I used for indentation, but I can't seem to make it stop replacing them (or stop deleting normal spaces or ignoring and not rendering tabs).
I recently did a clean install of ubuntu 10.4 and finally got everything working. All of a sudden my sound stop working and i can seem to tell whats wrong. The strange thing is though when i first turn on the computer i can here the drums at the login screen but after logging in there is no sound anywhere. I checked all the sound preferences and everything looks alright, nothing was muted. I am pretty much stumped..
View 6 Replies View RelatedInstalled 11.3 with KDE, actually it is working good with 512MB RAM. But there is not loud, but annoying noise, coming from speakers, some electronic noise. No such sound in XP. code...
View 9 Replies View RelatedMacbook Pro 7,1 (current model) - sound worked after adjusting as described here: [URL] Sound stopped after allowing system to update today.
View 5 Replies View RelatedSince a few days my audio volume adjusts itself while listening music (rythmbox) or watching a movie (vlc). Anyone else have these problems? It's really really annoying.
My system:
Ubuntu 10.04, 64 bit on intel i5
sound card: VIA VT1828S (onboard Asus P7P55D-E mainboard)
I�m configuring my Ubuntu 11.04 installation but one of the thing that really annoys me is that beeping sound every time I press a key on the keyboard. I haveńt found a way to disable it through System Settings(Sound preferences) and pcspkr is already blacklisted in the blacklist file.
View 2 Replies View Relatedi'm running 11.2 kde 4.3. i'm having issues with both smplayer and vlc. first, when i play an audio cd through smplayer, it pauses every 14-15 second. by pause i mean that the sound and time counter stops, and i actually hear the disc drive make a sound, the *typical disc-read sound. i tried a few discs, in case it was a specific cd; same thing for all. i also looked through the preferences to see if there was a setting that addressed it; nothing i see seems to address the issue.
playing the same cds in kscd works fine. but kscd really sucks....excuse me, it really really sucks. with vlc, whenever i start vlc, it will appear in my taskbar, but there is no other sign of its existence besides this. no system tray icon, no gui or any other sign of its presence besides the taskbar.
My gf won't stop laughing because I sound like a chipmunk to her in skype. Does anyone know how to fix this?
View 3 Replies View RelatedI am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
I am running the latest Ubuntu on my HP Paviljon Slimline PC with AMD Phenom 9750 Quadcore Processor and 4GiB Ram (2.4Ghrz). code...
When i play Music or Video i have no problems at all.
But.
Have World of Warcraft installed trough Wine and all is working perfect. The thing is that i hear a weird chirping sound when i log in the game (1 time) and then i hear a sort of ticking sound on the background and it stays there no matter if a disable music or not.
Have also tried all 3 settings in sound config (ingame) eg. System Default, Pulse Audio Software ((Null)) and ALSA Software on Default ((null)).
The weird ticking sound is staying.
Anyone knows a solution of have a hint where i must look to solve this ?
Installed Wheezy. Audio players either stop with an error message about no sound, or they quietly play silence. Tried with gui and comand-line versions.
Mucking about with lspci indicates that I have two sound cards. News to me. I try "lspci | grep -i audio" and get
00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04)
HP Pavilion Media Center a1430n Desktop PC
Athlon 64 X2 (T) 3800+ 2.0 GHz
Asus A8N-LA chipset GeForce 6150 LE
1 gB of RAM
Video Graphics: integrated
Hipro hp-d3057f3r max out put 300w
Here is the problem fist i had a 8800gt installed it work fine until one time the card stop displaying on my screen and the card would make a fan sound like if was over heated......but my integrated still displays... ok then i send the card to my provider so it can be replace.. so they send me a 8800gts .... and i installed and deleted the old drives and even upgrade my bios .... but still happen like it happen whit the 8800gt it wont display any thing on my screen and also is making the same fan sound of the 8800gt ....
I recently installed Squeeze. I had sound with the video driver that came with the install. Then I installed the Nvidia driver from Nvidia website. The sound dissappeared. When I uninstalled the Nvidia driver and removed xorg.conf and rebooted again, the sound came back. Then I installed the Nvidia driver from (nvidia-glx, dev and settings) from Debian with Synaptic. The sound went away again. If I uninstall the nvidia driver and xorg.conf the sound will probably come back again. The sound driver is the one that came with the install.
The volumes are unmuted in the alsamixer. Somehow alsaconf command does not work.
My mother board is a ASUS M4N78 Pro with Nvidia IGP.
What can I do to have sound with the nvidia driver?
I bought a new sound card for 9.10 and it said it was linux compatible, the mini_DVD produced the following code...
View 9 Replies View RelatedI'm afraid I only have basic experience with *nix command lines and have only been using Ubuntu for a week, so I may require a little bit of hand holding on something as nuts-and-bolts as a driver issue.
Relevant Hardware:
From lspci -v
Quote:
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3470 (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device e390
Flags: bus master, fast devsel, latency 0, IRQ 49
Memory at 80000000 (64-bit, prefetchable) [size=256M]
Memory at 90200000 (64-bit, non-prefetchable) [size=64K]
I/O ports at 2000 [size=256]
[Code]....
The Symptoms/Experience: Under the default installation of Ubuntu, I have no sound. When I install the proprietary ATI drivers, I have sound. I can uninstall and reinstall the proprietary drivers and recreate this every time.
My only problem with using the proprietary driver is that there's a lot of problems with video playback that is fixed with the free, default driver. But when I use it, I have no sound and watching a movie is still not very fun. From everything I read, many people are using the provided ATI driver with sound and fixing that should be easier than fixing the ATI driver's video tearing, which has largely stumped the community. Having failed to install "OSS" and now having no sound with either driver, I'm probably going to reformat/reinstall today but am looking forward to fixing this issue.
I reinstalled backtrack, and now have it working, except, it only works in a few things, there are many programs that don't recognize JACK (for instance, Firefox).Now, I have downloaded and installed libjackasyn0 which allows me to run,However I am unsure of how to make that work. Does anyone have any ideas of how I can enable libio2jack0, or does anyone have any other ideas as to how I might accomplish this?
View 3 Replies View RelatedI just did a linux install..have a SB Live Model EMU10K1 soundcard...does anyone know where I can find drivers for this card..
View 4 Replies View RelatedOne moment I was on my system working and the next I realized someone had deleted or removed my sound driver because I checked and it wasn't there. I should have written it down but I didn't and now I feel real stupid. Is there a way to restore it. I have a 32 bit machine running Fedora 12 Gnome.
View 3 Replies View RelatedI have a HP Pavilion dv7 laptop. Can you please tell me how can I find the right driver for my sound card? When I play a mp3 via vlc in ubuntu 9.10, there is sound, but the quality is bad. And I play the same on Windows7. It plays fine.
View 9 Replies View RelatedI use ubuntu 10.10 and for some reason the sound doesn't work. tried everything reinstalling ALSA and alsa driver doesn't even work any help, it's a toshiba satellite L505-S6946
View 5 Replies View RelatedI want to install this URL...How to? Because i downloaded the tar.gz2 format of it.And i dont know what to do.
View 2 Replies View RelatedSound works with Jaunty Jackal. Does not work with Lucid Lynx. It appears that Lucid Lynx will only acknowledge that I have a modem as a sound card. I just want to add my RealTek ALC880 driver so the sound will work. I've made sure that I have audio privileges, I made sure that nothing is muted using alsamixer. I've been looking at threads and documentation for four days just to fix the sound issue and so I can be prepared in case this 'feature' ends up being continued in Maverick Meerkat and when I upgrade I can use M.M. with minimal fuss.
View 1 Replies View Relatedwhen i first installed Ubuntu my sound card was working but now for some strange reason its making echo distorshion noises and a weird error beeping noise my soundcard is the following Creative SB Xfi S0770
note i do have a sound driver in a folder on my desktop that is the correct driver but it wants me to install it through a terminal i know how to get to it but i dont know the commands to install it the folder on the desktop is called "XFiDrv_Linux_Public_US_1.00" and there is a lot of files in their.
In the last week I have been noticing sound issues. Today my sound stopped working all together. I have a dual boot system: Windows XP and Ubuntu 8.10. The sound works fine under XP. My understanding is that there are problems with PulseAudio. Ive checked all the obvious things such as "mute" etc. My guess would be a corrupted sound card driver, but im not sure of the best way to remove it and reinstall it.
View 3 Replies View Related