Installed 11.3 with KDE, actually it is working good with 512MB RAM. But there is not loud, but annoying noise, coming from speakers, some electronic noise. No such sound in XP. code...
View 9 Replies
I�m configuring my Ubuntu 11.04 installation but one of the thing that really annoys me is that beeping sound every time I press a key on the keyboard. I haveńt found a way to disable it through System Settings(Sound preferences) and pcspkr is already blacklisted in the blacklist file.
View 2 Replies View RelatedI get sound from my speakers but not from my headphones. When headphones are plugged in the speakers are muted. In the mixer, all sliders are at 100%. Headphones were tested and worked on another system. Here is some information about my system.
Code:
root@laptop= /home/tom # lspci (snip)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) (snip)
Code:
root@laptop= /home/tom # uname -a
Linux laptop 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 x86_64 x86_64 GNU/Linux .....
Code:
links to sound configuration
ImageBam - Fast, Free Image Hosting and Photo Sharing
ImageBam - Fast, Free Image Hosting and Photo Sharing
Dell Studio 1745
Headphone jack seems completely unresponsive after a fresh install of openSUSE 11.4. Here are my outputs:
[URL]
-->From rpm -qa '*alsa*':
alsa-devel-1.0.24.1-4.7.1.i586
alsa-plugins-maemo-1.0.24-6.1.i586
alsamixergui-0.9.0rc1-749.1.i586
[Code].....
I have an old Acer Travel Mate 290 with OpenSuSE 11.3 (LXDE) 30G and 240Mb RAM. I don't have sound in the internal speakers, I only have sound through the headphones. Here you will find the information of alsa-info.sh [URL]
When I type:
rpm -qa '*alsa*'
alsa-utils-1.0.23-1.8.i586
alsa-plugins-1.0.23-1.9.i586
alsa-1.0.23-2.12.i586
alsa-firmware-1.0.23-1.2.noarch
alsa-oss-1.0.17-29.2.i586 .....
Right now I either can have wireless or sound. When I get sound I lose my wireless which may be due to some kernel issue. I use the madwifi, madwifi-kmp-default, madwifi-kmp-pae, & compat-wireless-kmp-pae for my athero ar 9285. This gets my wireless going.
I followed
SDB:AudioTroubleshooting - openSUSE
and couldn't get sound
Then I followed
Alsa-update-snapshot - openSUSE
I get sound but lose my wireless. I reinstall madwifi-kmp-pae, & compat-wireless-kmp-pae. I have to downgrade some kernel conflicts and I have wireless, but no sound. My sound information is here [URL].
I might have a different problems as I have a newer laptop, a HP dv6-2170us with intel i5 cpu. I had no wireless with the 2.6.31 kernel so I upgraded to the 2.6.34 and had to manually compile my wireless driver. Everything works great now except the sound issue. I thought it use to work out the box with the old kernel, but then again I might be wrong. I knwo it works in the "other os" dual booting and all. Its a not a huge issue, but hopeing I could resolve it. Here is some of the info from reading some of the other posts. the model=dell-vostro I just tried to see if that works, which is doesnt, so thats why thats in my sound.conf file.
[Code].....
Have I missed anything? I have tried the fix here: Audio coming from both headphone and laptop speakers - Page 3 - openSUSE Forums page 3 about adding a repo and upgrading, but that upgrade wants me to revert back to the older kernel in which case I dont have wireless support or acpi working proporly, so thats not a doable thing for me.
Sometimes (quite frequently) during the normal use of my laptop (64bit Ubuntu 9.10), if I do not play songs nor anything else, I get annoying sounds, like when guitarists cable their instruments while ampli are on.Apparently this happens particularly when I open new windows or new tabs in my browser, when I shut down my pc, etc...
View 1 Replies View RelatedI have Hp Pavillion dv4-1235ee Notebook PC with windows vista.there is no sound coming from internal speakers, 3d sound blaster pro compatible sound 16 bit integrated.
View 1 Replies View RelatedI don't understand what is going on... If I listen music, the sounds quality is just perfect, but if I play quakelive, I start heard some annoying noises such as my headphone wire is damaged. how to remove it? Maybe something wrong with sound drivers? I use ubuntu 10.04 LTS version OS. Sound card is realtek (integrated to motherboard).
View 2 Replies View RelatedI managed to patch myself a line in cable and never had problems with earlier versions of ubuntu but with 9.10 I'm having a problem with my soundblaster card and my speakers. I'm trying to record with ardour but I can't hear the click track because my guitar is playing back through my speakers and it's louder than everything else. I never had this problem with earlier ubuntu releases. I've tried finding a way to disable playback through the speakers so I can just turn the volume up on the amp and record and listen back on what I've recorded. There's an option in ardour audio setup do choose what playback I want but no option makes a difference. Where have the mic and line in volumes gone in 9.10? Is there a way of fixing this?
View 1 Replies View RelatedWell, the title pretty much sums it up. Whenever i plug in my external speakers, my laptop speakers continue to put out sound, which is good until i turn up the volume and hear rattling.
I am running ubuntu 9.04 64-bit 2.6.28-13 on an MSi GX620.
The solution given there -to edit settings via gconf-editor - worked fine.In Ubuntu.Now I wanna do the same thing in Lubuntu - the Ubuntu remix that uses LXDE instead of Gnome.I tried running gconf-editor but (duh) it's not installed because Lubuntu doesn;t use Gnome. How do I tell LXDE to quit asking for confirmation? I'd also like to have the option to just delete stuff right away, rather than it going into the trash file first.
View 3 Replies View RelatedMandriva-2009.1 tries to install a package called Task-Printing-Server every time I power up my PSC-1401 All-In-One (multifunction) printer. This is very annoying & I want to stop these pop-up messages.This printer uses the hplip package (PSC_1400.ppd for printing & hpaio for scanning) & everything works fine except for those annoying pop-up messages.
View 2 Replies View RelatedWhen I record my voice, using the gnome-sound-recorder, I get an awful buzzing sound in the background. Altering the input volume or the output volume the recorder makes no difference: it makes the buzzing sound louder or quieter - but also makes my recorded voice louder or quieter.Can anyone offer me a solution that gets rid of the buzz whilst keeping the voice volume as it should be?
View 3 Replies View RelatedBefore I upgraded to 10.10, I would hear sound on both my PC speakers and on my TV. The speakers are connected via the standard speaker out, the TV was connected via the line-out, through a stereo to RCA adapter. Video is supplied to the TV via HDMI. Now that I've upgraded to Maverick, however, I no longer get sound on the TV. This isn't the usual "sound stopped working completely on upgrade" issue, because I get flawless sound via the PC speakers just as before. I've tried most of the debugging steps recommended in other threads about audio, with no improvement.
The weird thing about all this is, when I plug other speakers or headphones into the same port, I hear audio. So I'm starting to suspect that the problem has to do with the HDMI audio out capability on my video card (an nvidia GT 240), which might have suddenly come alive (if not fully functional) with Maverick's new version of ALSA. I don't know what signal(s) my TV thinks it's getting and have no way of troubleshooting things on that side, but it seems possible that the HDMI it's getting video through is also sending a null/silent audio stream, and that stomps the analog audio signal it's getting from my sound card.
I see two output devices in Sound Preferences, "Internal Audio" and "High Definition Audio Controller". "Internal Audio", ie my onboard sound, is what's producing audio via the speakers. HDMI has never produced any audio, and I don't really need it to if I can just make it work the way it did before. I've tried completely disabling that device, even adding the "snd_hda_codec_nvhdmi" module to /etc/modprobe.d/blacklist - no change.
The solution for this could be one of two things: one, I could try to get the HDMI audio out working and let that be what my TV receives, two I try to make the audio setup work as before, with analog audio going to both speakers and TV. Thoughts? I'm leaning towards the latter, ie not bothering with the HDMI audio, as having another audio source would probably mean messing with PulseAudio which has otherwise worked 100% fine for me up until now. If need be I can supply more details on hardware, CLI output etc.
can't get sound through all 4 speakers.
I have an onboard soudcard (Realtek ALC 883).
My headset is doing a fine job, using the standard audio connections, but I'd like to be able to use speakers as well. Someone's given me a very basic "soundball" ‒ only visible identification, the word 'goobay' ‒ that's been doing well on another O/S. When I plug it in, it's on speaking terms with the USB port as far as drawing power goes: but doesn't play anything.
The options from Sound preferences don't include anything as obvious as "use USB port/ use audio connectors". Is there an easy answer?
After updating my kernel my sound stopped working. I followed the sound problems guide in the sticky thread at the top of this forum and I've now got it to the point where I get sound through the headphones but not through the laptop speakers. Here is my sound info (output from alsa-info.sh thingy). I've added various lines to the end of my alsa-base.conf but no luck.
View 9 Replies View RelatedI'm currently running 32-bit Ubuntu 10.04 on a Pentium 4. I'm currently using the LXDE desktop environment but the problem is the same in GNOME. I have new Altec-Lansing BX1220 speakers. They didn't come with a driver disk and a Google search didn't return any drivers, so they should be plug-and-play. When I plug them in, the light turns on, and with the volume high enough it returns feedback. However, they don't actually play what the computer is playing. I went into alsamixer and made sure all the volumes were turned up; it didn't help. It was plugged into my microphone jack.
View 1 Replies View RelatedI have installed 10.04 on my sony vaio, model VPCF115FM, and when I plug in my headphones I can hear sound, but not from the speakers when I unplug the headphones. I have checked the alsamixer to make sure nothing was muted.
View 9 Replies View RelatedI am running Ubuntu 10.10 which is great but since yesterday i have not been able to get a sound out of the speakers?
View 3 Replies View RelatedBasically, my sound is coming through earphones when plugged in, but not coming through speakers without earphones in. I have followed through the steps of other people with the same problem but no luck.
View 1 Replies View RelatedJust installed Ubuntu 10.10 with Wubi (took forever to figure out how to get the wubi.exe to recognize the 10.10 iso) and I don't have sound coming from my speakers. Audio works fine with headphones, but output from speakers is non-existent.
I get sound when I boot into Windows 7, so I doubt it had something to be with the actual speakers. I'm really new to Ubuntu (but loving it!) so troubleshooting is a little difficult for me, especially with terminal commands.
I replaced the motherboard and now the sound on 11.04 only comes from the headphone jack. however when i boot into bios i can get the bios to beep through speakers. the speakers also do not produce sound on a Ubuntu live CD. Here is my output of lspci so you can see all my hardware inside. p.s. its a laptop dell stidio 1558
Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
[Code]....
I have Ubuntu 11.04 installed on my Toshiba Satellite C655 laptop. When I plug my headphones, they sometimes work, they sometimes don't, but that's not the main problem. When they do work, sound also plays out of the speakers. The only solutions I was able to find were for earlier versions, which don't work for 11.04.
View 9 Replies View RelatedI'm running openSUSE 11.1, KDE 3.5.10. I used to get system sounds (like startup etc) and I could get sounds from Amarok when I played .mp3 files.
However, yesterday my Amarok crashed and I could not get any sound from Amarok (I was using gstreamer/auaup engine, didn't have any other engine). But I could still hear the system sounds like shutdown, startup etc.
So I was playing around with KMix and alsamixer settings. I don't have root access on the computer so I can't change any configuration files or anything. Just changed the volume controls etc. But now I can't get any system sounds.
I ran speaker-test and no sound there either. All my mixer volume controls are on max but I can't remember exactly what I changed on KMix. I'm thinking I messed up the switches some how.
I have an HP Pavilion Desktop computer with integrated speakers in the screen. When I do not have any headphones plugged in my headphone jack, sound is coming out of the speakers.When I plug headphones in my headphone jack, sound is coming out of both the speakers and the headphones. I would like for sound to come only from the headphones when they are plugged in.
View 9 Replies View RelatedI recently switched to Ubuntu 9.10 from Fedora 12 because it was giving me problems, but now I've run into some problems with Ubuntu. I really only use my computer for internet and music, and I'm not really able to listen to my music.My computer is an HP Pavillion dv7-3060US laptop, AMD 64bit processor, 4gb ram, ATI Mobility Radeon HD 4530 graphics chip and an ATI chipset (not sure which).
I have an altec lansing speaker configuration, with a built in subwoofer on the bottom. My problem comes that the sound is coming out of the subwoofer, not the actual speakers themself. When I try plugging in an external set of speakers, nothing happens, the sound still plays. Switching the device from "Interal audio analog stereo" to the other choices in my list does nothing (system>preferences>sound is the list im talking about)I'm able to hear music through my subwoofer when using totem music player, but neither rhythmbox nor amarok play any music. amarok doesn't play at all, and rhythm box shows the music is loaded but no sound comes out and it looks like its playing it at 2x speed.
I've attempted to follow the comprehensive audio problems guide here but I get to step 3 and the website isnt the same, so I can't continue.These are the outputs from the first few steps:
Code:
aplay -l
root@kadar-laptop:/home/kadar# aplay -l
[code]....
Until recently, when connected my laptop to the stereo via audio out, i had sound coming only from the stereo. I don't know why and when exactly this happened, but now when the stereo is connected, i get sound from the laptop speakers and stereo speakers simultaneously.Is this a bug? I'd like to mute only my laptop speakers but haven't figured out how. I've tried every setting in "sound" or "audio" or whatever it's called in english, but to no avail.Any ideas how to turn off the laptop speakers?
View 2 Replies View Related
