Debian Hardware :: Installed Wheezy - Audio Players Stop With Error Message About No Sound
Aug 22, 2014
Installed Wheezy. Audio players either stop with an error message about no sound, or they quietly play silence. Tried with gui and comand-line versions.
Mucking about with lspci indicates that I have two sound cards. News to me. I try "lspci | grep -i audio" and get
00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04)
View 9 Replies
ADVERTISEMENT
Sep 2, 2010
I'm brand new to debian and quite new to unix based systems in general.
I just switched to debian from ubuntu in search of something different and I want to find a system that works for me before I settle down.
I DO NOT HAVE A SECONDARY OS
just two problems I have with debian:
No sound
Error message: No volume control GStreamer plugins and/or devices found.
When I try to open sound from the speaker icon at top right.
I think it's a driver issue but Its not as easy as ubuntu was lspci:
My trackpad also does not work so I have to open documents manually if I don't bring my mouse to class.
View 3 Replies
View Related
May 6, 2014
I recently switched over one of my Ubuntu machines to Debian Wheezy. On the Ubuntu system I was able to get the HDMI audio working by adding radeon.audio=1 to grub. I've tried this on this system to no avail. The fglrx-legacy-driver causes underscan and I'd like to avoid it if possible for convenience.
Things I've tried:
fglrx-legacy-driver - Introduced underscan while not solving the problemradeon.audio=1 in grub boot line - No effectGoogling for several hours - There's a lot of topics about this, but most are old and irrelevant, and the ones that are current enough didn't solve my issue.Yelling at it - HDD light blinked a few times, no change
lspci shows
Code: Select allAudio device: Advanced Micro Devices, Inc. [AMD/ATI] RS780 HDMI Audio [Radeon (HD) 3000 Series]
View 14 Replies
View Related
May 14, 2011
Yesterday I downloaded and installed Wheezy 64 from the most recent debian-testing-amd64-netinst.iso (as of yesterday) on my new Zacate-based MSI E350IS-E45 (MS-7698) AMD E-350 ITX motherboard. I figured I needed something recent to support a very new chipset, I don't think Squeeze was even stable when this chipset came out.
Everything seemed to go smoothly, I was asked for the firmware tarball, but I guess I hit the wrong button and the installing just continued. Everything set up OK, it seemed, but I didn't have speakers or headphones on the system. I didn't appear to need the firmware-linux package, the networking was working, radeon was providing proper screen resolution, if kind of crummy performance (Desktop Effects wouldn't work in KDE, for instance, and 1080p won't play, though it does better than in Ubuntu).
But as I was configuring some program it complained about no sound output, I didn't make much of a note of it, I figured it was just some muted mixer, or such, I haven't had many problems with Linux audio before (except getting spdif to work, but I didn't need that here). But I started noodling around and sound was just not working.
aplay -l
aplay: device_list:235: no soundcards found...
lshw -C sound
*-multimedia:0 UNCLAIMED
description: Audio device
[Code]....
So I installed the the firmware-linux & firmware-realtek packages, no effect (actually, not quite true, my ethernet speed seemed to increase). Then I tried the Liquorix 2.6.38-6.dmz.1-liquorix-amd64 kernel, no joy. Attempting to "insmod" various snd modules just gives me "No such file or directory"
At this point I don't know what to do. I guess I could try "upgrading" to sid and hope for the best. Or I could uninstall all of pulseaudio, which I know has been very problematic for a lot of people. I could even try to purge and reinstall a bunch of alsa packages:
[Code]....
I suppose I could try to go to the alsa web site and download & install its driver, lib & utils. I'm really hoping it won't come to that, sound should really work out of the box. Or I could just wait and hope a future upgrade sorts out the sound.
View 14 Replies
View Related
Jan 17, 2014
Sound is not working perfectly since installation. I fixed it by command: 'alsactl init' every time sound doesn't come out. However, since last week, sound was not working. I suspect it was caused by the 'apt-get upgrade' I did.
Code: Select allroot@debian:~# alsactl init
alsactl: init:1743: No soundcards found...
lspci (only audio)
Code: Select allroot@debian:~# lspci -v
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
Subsystem: Micro-Star International Co., Ltd. Device b002
[Code] ....
It seems I am missing a module/ kernel driver for the sound card
Note: I have testing in sources list but have stable with higher priority. So I should still be in Wheezy
View 5 Replies
View Related
Dec 16, 2014
I have Debian WHeezy 7.7 KDE, card Radeon 5000 series. Card has HDMI, video on HDMI working, but sound not working. System see sound device, but if I select this and try to play music then no sound. I tried many things. Below is some lists.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
[Code] ....
View 1 Replies
View Related
Jan 22, 2015
I upgraded to Jessie today and found that I have no sound.
Code: Select all# uname -a
Linux ath 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux
There is no sound card on the motherboard. Sound worked previously through HDMI from a Nvidia GTX570
Code: Select all# lspci|grep Audio
09:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
Code: Select all# aplay -l
aplay: device_list:268: no soundcards found...
[code]....
View 8 Replies
View Related
May 21, 2014
My microphone in skype is crackling on Debian Wheezy stable 7.5 ... It is OK on Windows so it is obviously not the hardware to blame.
I have tried already all the options I could find regarding this on the internet, by changing in /etc/pulse/daemon.conf:
Code: Select all resample-method = speex-float-10
OR
Code: Select all resample-method = speex-float-1
My output was also crackling but I solved it by changing:
in /etc/pulse/daemon.conf:
Code: Select all default-sample-rate = 48000
flat-volumes = no
in /etc/pulse/default.pa:
Code: Select allload-module module-udev-detect tsched=0
I also tried starting skype with
Code: Select all PULSE_LATENCY_MSEC=30 skype
Without any success. Now the output is perfect, but the microphone in skype (haven't tested it elsewhere) is crackling.
View 4 Replies
View Related
Dec 25, 2014
I just installed wheezy and upgraded to jessie. I had previously gotten sound working in wheezy by installing the flashplugin-nonfree and flashplugin-nonfree-extrasound packages, after configuring my headset in system settings. However, now I can't get sound to play in firefox. I've installed flashplugin-nonfree, flashplugin-nonfree-extrasound, and pulseaudio, still without luck. The volume is turned all the way up in alsamixer, sound tests play fine, and I can play music in VLC without any problems. This leads me to believe it's not a problem with drivers, but with some package I'm missing that will allow firefox to play sound. Sound wasn't working in the default video player either, before I installed the flash plugin. Is there something I'm missing?
Also, sound doesn't play on Konqueror either (KDE browser), which seems to indicate it's a problem with flash and not with firefox itself. After removing the flash plugin and installing pepperflashplugin-nonfree to ensure the pepper plugin was used instead of flash, sound still would not play in chromium, so I reinstalled the flash plugin and still don't have sound in any browser.
View 1 Replies
View Related
Aug 20, 2010
This happens every time I try to burn an audio CD burning data CD seems to work fine.I open Brasero, click Audio project, drag a couple of FLAC files into it and try to burn, or in this particular case, create an image.A dialogue pops up where I am supposed to tell it where to put the image. I click Desktop but I don't change the file name (something like brasero.cue or whatever).Then it starts doing things but after a short while I get an error message and I am asked to save the log file, which I did and here it is:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroNormalize called brasero_job_get_action
[code]....
View 9 Replies
View Related
Sep 26, 2015
After install debian 8, I can't see system start and stop message from console ... How can I enable system message from console in debain 8?
debian 7 output
----------------------------------------------
root@demo:~# service apache2 restart
[ ok ] Restarting web server: apache2 ... waiting .
root@demo:~#
debian 8 output
-----------------------------------------------
root@demo:~# service apache2 restart
root@demo:~# <=============================== No message (start or stop)
View 0 Replies
View Related
May 28, 2010
I'm trying out Konqueror on Debian Lenny. I'm annoyed by the sounds it plays along with message boxes (for instance: sound of a breaking glass on message boxes showing an error). I can't neither find any setting for that nor I've been able to find some general setting.
View 4 Replies
View Related
May 24, 2011
I've been creating a website of late, and I've decided that I've come far enough along to get actual web development software (though gedit has served well). In Gnome, I have Bluefish, which is alright, but I also wanted something for KDE, since I also have Kubuntu 10.04 installed. I did some reading, and decided to see what all the fuss about Quanta Plus was about. I download the tar file, extract it, but when I run ./configure, it goes through a couple of steps and everything seems to be checking out okay.
Then I get an error message that says I am missing kde-config, and that I should check my KDE installation. I didn't do anything abnormal during the Kubuntu installation, so I can't imagine what I could do to check that installation. So then I go tot the INSTALL file, and try the alternative installation ./configure method, and I get an error message that says the the C compiler can't output an executable.
View 2 Replies
View Related
Feb 15, 2010
My level is starter with Ubuntu. Moderate experience with C.Problem starting with programming in C under Ubuntu.I have installed Anjuta IDE and made this classical program.
#include "stdio.h"
main()
{
[code]....
View 2 Replies
View Related
Jan 7, 2016
I try to update the packages before upgrade to wheezy,looks like when I run apt-get update,it shows error as per below:
W: GPG error: http://fosiki.com stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 379393E0AAEE96F6
rat:~# apt-key adv --keyserver keyserver.fosiki.com --recv-keys 379393E0AAEE96F6
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --
[code]....
View 9 Replies
View Related
Dec 14, 2010
Iv installed ubuntu 10.10 onto a usb 4gb pen. EVerything works fine. However I then wanted to encrypt the USB using truecrypt inside ubuntu and got an error message telling me it could not find some file. I then installed virtualbox onto the ubuntu this installed fine,i then installed windows xp and after completion clicked save the state. I then restarted ubuntu and when it loaded up again the virtualbox and windows xp had been deleted. Iv tried this twice just to make sure but same thing both times.
View 9 Replies
View Related
Apr 20, 2011
I installed the MOTU ffmpeg and libav ppa in Natty beta, the installation went through ok and media players all work. But I am having problems converting MP4 to MP3 (extracting audio) with the error message that libmp3lame unknown encoder. I checked that lame and libmp3lame0 are both installed. I wonder what might have been the missing piece.
View 9 Replies
View Related
Mar 23, 2015
I have a problem getting Serial Port working on INTEL NUC DE3815TYBE. I have Debian Wheezy installed with kernel 3.16.0-0.bpo.4-amd64.
When I do :
Code: Select allsetserial -g /dev/ttyS*
I get:
Code: Select all/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: 16550A, Port: 0x0000, IRQ: 19
/dev/ttyS2, UART: 16550A, Port: 0x0000, IRQ: 19
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3
I can connect to ttyS0 - ttyS2 without any problem but ttyS3 is not working and I am getting this error:
I call command:
Code: Select allstty -F /dev/ttyS3 9600 cs8 cread clocal
I get:
Code: Select allstty: /dev/ttyS3: Input/output error
I am running the commands as ROOT. I also tried: setserial /dev/ttyS3 irq 3 uart 16550A skip_test but I am getting the same stty: /dev/ttyS3: Input/output error
Output of:
Code: Select alldmesg | grep tty
Code: Select all[ 0.000000] console [tty0] enabled
[ 0.952559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.953593] 0000:00:1e.3: ttyS1 at MMIO 0xd0810000 (irq = 19, base_baud = 2764800) is a 16550A
[ 0.954072] 0000:00:1e.4: ttyS2 at MMIO 0xd080e000 (irq = 19, base_baud = 2764800) is a 16550A
[ 27.740208] ttyS2 - failed to request DMA
[Code] .....
lsof /dev/ttyS3 doesn't return anything so it means there is nothing connected to ttyS3 I guess but I am not very skilled with linux so I might be mistaken
Why I can see 4 ttyS* in my Linux but physically I have only 2 physical Serial Ports on the board?
View 2 Replies
View Related
Feb 27, 2010
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies
View Related
Jun 10, 2010
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
View 1 Replies
View Related
Feb 8, 2011
I made a backup of some mp3 and ogg files onto a a DVD. I had to re-install my OS and now need these backup files. The files show up on the file navigator and show appropriate file sizes but they are not recognized by any of several players I have tried (Rhythmbox, xmms,vlc, amarok).
View 11 Replies
View Related
May 2, 2010
Got my system's audio up, but I'm having a real problem keeping streaming audio going, either in VLC or in the default movie player thing.It'll go for a while and then just stop. I guess it's having a problem with "resume" function or buffering.Any thoughts on this? I'm not having that problem with VLC in XP on the same connection.
View 2 Replies
View Related
Aug 8, 2010
I installed Azureus from their site. It works well. The only problem is when Azureus tries to apply updates, I get this error message:
"The folder <path-where-I-installed-Vuze> is not writable. This will prevent future software updates from being applied."
There was a link the the Vuze wiki, and the problem is that I (or is it the Azureus updater?) do not have permissions to write to that directory, or words to that effect.
How do I apply the proper permissions so that when an update from Azureus is downloaded, it is applied?
The wiki offers this solution:
Quote:
But this looks like something that I have to do manually, each time...
How do I set it up, so that the updater has the permissions and uses the proper password to do it automatically, when I restart Vuze?
I'm using Ubuntu 9.10
View 6 Replies
View Related
Jul 28, 2010
I need to recored inner audio not from microphone. Audio such as i hear when i open a website.. how can i record that? What software should I use? I'm using Ubuntu 10.04
View 8 Replies
View Related
May 8, 2010
I just installed ubuntu 10.04 although everything works fine I have a problem related to sound, When I click Preferences/Sound I get the message "waiting for sound system to respond" and actually it does not respond at all. Although, I have downloaded, compiled and installed linux drivers from realtek website it did not fix the problem. internet which is simply deleting .pulse folder and restarting it didnt work either.At the moment I am using terminal alsamixer for controlling sound level but even the maximum attainable volume is too low.
View 9 Replies
View Related
Mar 5, 2010
I cant seem to install Ubuntu 9.10 at all. At 15% I get the following Error Message Input/output Error During Read On/dev/sda then I get the creation of swapspace in partition #5 of SCSI1(0,0,0) (SDA) Failed. Ive tried 6 times already. Im getting no sound at all. How can I change the screen resolution. 800 x 600 is the highest it will go. Im getting really discouraged with Ubuntu. Alot of people seem to have the same problems I am having but there is no solutions. I've checked the MEMTEST and passed, done a disk check and passed.
View 9 Replies
View Related
Jun 10, 2010
I have very strange problems with all the good audio mp3 players in Ubuntu. Not the bad programs only the good (whcich have good skins and library and so on). Amarok for some reason skips all the music files but only mp3 if I put m3u online radio it works. It doesn't show errors at all just skips the songs. I've never had issues with mp3 files before. The movie player works liek a charm but is too cheap (no library to browse files). Banshee was great and suddenly it stopped working just like the good old Rhythmbox... They appear to be starting in background but don't show nowhere. I cannot install XMMS players too it isn't found on the apt-get server. Also my packages are fully updated.
Reinstalling the programs don't help at all! It must be some major issue with the programs not launching. It's not a single program Banshee, Rhythmbox and I think some other but don't remember the names. Movie player plays all but is too simple. I want something like Winamp with nice library please help. No need for movies just mp3. Exaile works not fine with mp3 but I preffer how Rhytmhbox shows the music library with all the songs not like in seperate folders. I could try song shuffle. But why the other programs don't start what command can show what's happening?
View 2 Replies
View Related
Jun 10, 2011
I am using debian on kernel 2.6.38-2-amd64 with Kde 4 and I have one sound card integrated on my mother board (Asus A8N32-Sli Deluxe) with Nvidia CK804.
Often when I start debian I get a message that sound card wasn't found, therefore from the Konsole I have to reload the as:
xxxx@debian:~$ sudo alsa reload
Unloading ALSA sound driver modules: snd-intel8x0 snd-ac97-codec snd-mpu401 snd-gina20 snd-pcm-oss snd-mixer-oss snd-mpu401-uart snd-pcm snd-seq-midi snd-seq-midi-event snd-rawmidi snd-seq snd-timer snd-seq-device snd-page-alloc.
[Code].....
View 2 Replies
View Related
Jun 9, 2010
I've dedicated most of today attempting to get some sound out of my Debian Lenny installation and I'm getting nowhere. I've tried a varity of potential solutions and still no peep from the machine. I'm using ALSA (and ran the 'alsaconf' utility with no errors and then used 'alsamixer' confirming that the volumne is set and not muted) for sound playback but nothing works?!? Here's some of the output that may resonate to some people...
Quote:
Quote:
Quote:
Quote:
I've tried everything that I could find online and installed a variety of alsa related stuff, but at this stage my lack of experience (coming from a Windows background) is really beginning show. The only unexplored thing is that the device is not listed in the xorg.conf file, but there doesn't seem to be many mentions of this online and a possible red herring. The only other thing is that when running the 'alsaconf' utility it does show two cards installed on the system, these are: via82xx and legacy. I've always selected 'via82xx' as the other options prompts 'Probing legacy ISA cards might make your system unstable.' I'm plugging the speakers into the 'green' audio out socket.
Finally, when running videos on mplayer it does report that it is using alsa as the audio output option and it doesn't highlight are errors...Oh yeah - the speakers have been tested and do work.
View 3 Replies
View Related
Jun 20, 2010
but I still get sound upon testing my audio card as well as when using flash in a browser (....., etc).[URL].. There's my alsa information. Output of rpm -qa '*alsa*'
Code:
alsa-utils-1.0.21-3.1.i586
alsa-oss-1.0.17-25.2.i586
alsa-plugins-pulse-1.0.21-3.3.i586
alsa-plugins-1.0.21-3.3.i586
alsa-1.0.21-3.2.i586
alsa-devel-1.0.21-3.2.i586
Output of rpm -qa '*pulse*'
[Code]...
I'm running openSUSE 11.2 on KDE, although the problem persists on other desktops. I followed the instructions on SDB:AudioTroubleshooting - openSUSE, as well. If anyone needs any other information, please let me know. It worked before, I don't know what caused it to stop working.
As well, I've tried to install the restricted formats, but even when my audio did work, it wouldn't play them. I followed the instructions specific to my version on the restricted formats guide.
View 9 Replies
View Related
