I use ubuntu 10.10 and for some reason the sound doesn't work. tried everything reinstalling ALSA and alsa driver doesn't even work any help, it's a toshiba satellite L505-S6946
View 5 RepliesI have a few issues with my new install of Ubuntu. My screen resolution doesn't go above 800 x 600 and my sound card does not work. I believe these are driver issues.
[Code]....
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
Hibernation on my laptop doesn't work. When I try to hibernate (either manually or automatically because battery goes critically low), any of the following can happen (randomly):
A. During the hibernation process it hangs forever with a black screen (with or without some error messages unanderstandable to me) and never terminates hibernation. I have to manually turn it off by holding the power button, and when I turn it on again, it does a fresh boot.
B. Instead of hibernating, it just locks screen.
C. It (apparently) terminates the hibernation (the power goes off automatically as if it had succesfully hibernated, even if AC power is connected), but then, when I turn the computer on, instead of resuming it does a fresh boot.
D. It hibernates succesfully and when I turn it on it resumes succesfully. This almost never happens; it has been a long long time since the last time it happened.
I am far from being the only one and this has been so for years. The bug has been reported in launchpad by a lot of people a long time ago, so if it has not been fixed in such a long time it must mean that the developers don't think it deserves much attention. (Which is strange by the way, because an operating system with non-bulletproof hibernate/suspend is an operating system that you just cannot safely use, at least on a laptop.)
I've searched through the forums and tried the solutions given but couldn't get my sound to work I have a HP pavilion dv7 laptop and I'm running Lucid Lynx. I get the following output when I run the alsa-info bash script found in another thread:
[Code].....
I just installed Ubuntu 10.10 I love it. The only problem is my built-in mouse doesn't work. My usb mouse works fine but not the built-in one. When i was installing Ubuntu i used the USB mouse, The only problem is my mum needs it for her computer.
View 1 Replies View RelatedI've been struggling to get my sound to work properly in my HP dv7 laptop in Ubuntu 9.10 64-bit.
If I follow the instructions here [URL] then I can get my microphone to work.
My speakers worked fine right out of the box, but the headphone jack does not. When I follow the instructions here [URL] and install the alsa backports then my headphone jack works properly, but when I shutdown my computer I get a loud crackling/popping sound. Uninstalling the alsa backports stops the crackling, but then the headphone jack doesn't function.
I just tried a fresh install of ubuntu 9.04 and a new attempt for 3D acceleration with my ATI Radeon Xpress 1150 - AND IT WORKED! thanx to this guide: [URL] glxinfo | grep "direct rendering" was giving a YES and playonlinux in the terminal didn't give the usual "you don't seem to have any 3D acceleration" message. For a few minutes, my happiness was greater then ever (ehum) I installed Jedi Knight II, Jedi Outcast, and it worked. Only I couldn't adjust the screen size or the gamma (and a few other minor video settings). After some install/reinstall of playonlinux and wine I found out something: 3D acceleration didn't work any longer. glxinfo | grep "direct rendering" is now giving
direct rendering: No (LIBGL_ALWAYS_INDIRECT set) and I get the error in Playonlinux that i don't have any 3D acceleration. I want to know how this could happen? My xorg didn't change at all. But for completeness, here it is:
[Code]....
So, I jaibroke my iPod touch and have OpenSSH and I can ssh into my iPod, but I cannot ssh back into my Laptop??
I did
Code:
$ echo '192.168.*.*' >> /etc/hosts.allow ##I googled and it said to do this
$ echo 'sshd: 192.168.*.*' >> /etc/hosts.allow
I also uncommented these lines in /etc/ssh/sshd_config:
[Code]....
I am 100% sure I am putting in the right password. I even did that ^ code from my laptop, the one I am ssh'ing into, but it still will not accept my password. I even tried root@ instead of matt@..
The cooling fan on my Toshiba Satellite m500 doesn't work after installation of ubuntu 9.10. I've looked on the internet but i can't seem to find anything.
View 4 Replies View RelatedI have installed it in multiple machines (servers, desktops, laptops)I have even installed 10.04 beta in several laptops for educational purposes without a single crash. But 10.04 crashes in laptop ASUS X50GL with processor Intel Core 2 Duo T5800.In fresh installation, it hangs always, in ANY 10.04 version, beta or stable, 32 or 64 bit, also from iso image in CD or in usb stick,I have tried all possibilities!Therefore, clever enough, I though let's do it in an indirect way: let's install the 8.04 distro (it works) and later on I will upgrade to 10.04. So I just did.Everything was fine (also the upgrade, without a single warning) until final reboot after upgrade to 10.04.hanged at boot!. There is incompatibility between 10.04 and this firmware, clearly. Unfortunately, 10.04 is not yet stable, I guess.I took a picture of the screen which I attach.
View 4 Replies View RelatedI am running Debian Squeeze on a laptop and I cannot get sound to work on it. It detects theres 2 sound cards in alsamixer and under cards i see HDA-Intel - HA ATI SB and HDA ATI SB at 0x90400000 irq 16. I think HDA-Intel is suppose to be selected not what is currently selected which is HDA ATI SB. If thats not an issue I'm not sure what is and I've tried reinstalling Squeeze and it still hasn't fixed the issue.
View 10 Replies View RelatedMy sound does not work on my HP laptop I have "Ati mobility radeon HD2600 256mb" as graphic/sound card pherhaps I must install the drivers for the card manually? And how do I do that?
View 3 Replies View RelatedI can't get the sound working at my laptop (HP Pavilion DV6-1115es). Fist at all, the 'snd' module can't load. So I installed the kmod-alsa from elrepo. Now the modules load well (see below), but... The problem seems to be a device busy code...
View 3 Replies View Relatedon my old fx 5200 nvidia card, I installed the 173 driver and now when I log in to Default Ubuntu desktop with 3d enabled, like my screen will flash on and off like the panel and my awn dock turns white and then returns to desktop and repeats. You can only see the wallpaper and thats it. Useless! My desktop is virtually useless because I can't even use it. Gonna have to reinstall Ubuntu for the 5th time!
View 5 Replies View RelatedAfter upgrading from 9.04 to 9.10 internal subwoofer on my Acer Aspire 5930G laptop stopped working.
UPDATE and FIX: Problem was fixed after upgrading to ALSA 1.0.22 using instructions from this topic: http://ubuntuforums.org/showthread.php?t=1046137
NOTE: be sure that ALSA driver was really updated using this commmand:
cat /proc/asound/version, if not, see these posts:
problem: http://ubuntuforums.org/showpost.php...&postcount=670
solution: http://ubuntuforums.org/showpost.php...&postcount=678
I bought a new CDROM drive, as recommended by HP. It still doesn't work. I can open and close it now; so that's changed. But it still doesn't appear as a drive, and I can't use it.
Here's as best as I can describe it:
When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time.
In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer.
In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount.
If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.
Sound works with Jaunty Jackal. Does not work with Lucid Lynx. It appears that Lucid Lynx will only acknowledge that I have a modem as a sound card. I just want to add my RealTek ALC880 driver so the sound will work. I've made sure that I have audio privileges, I made sure that nothing is muted using alsamixer. I've been looking at threads and documentation for four days just to fix the sound issue and so I can be prepared in case this 'feature' ends up being continued in Maverick Meerkat and when I upgrade I can use M.M. with minimal fuss.
View 1 Replies View RelatedI am running fedora 14 64 bit on Dell Inspiron. All of a sudden sound from speakers is not coming. They work in windows. I am suspecting some update with pulseaudio. However, earplugs work.
View 6 Replies View RelatedI have this old kUbuntu box here, which used to be 8.04. For some reason after a bunch of upgrades and other unrelated changes sound doesn't work any more.
Sound works on this machine when rebooting to Windows, so it's not hardware problem. It used to work on Linux on this machine before, so it's not weird hardware. (lspci says 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)) This problem persists across resets. alsamixer etc. claims sound is not muted, and volume is high. it's the same no matter which program I try to play some sounds (or which -ao for mplayer, default seems to be pulse) nothing obvious shows up in system settings
Do I really need to reinstall the system to fix that, or is there something simple I'm missing?
I just installed 10.04 but sound doesn't work.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
[Code]....
Every time I log in Ubuntu 10.04, everything works fine, but there is this annoying problems with the sound volume and icon: It always appears as muted, and if I try to turn the volume up, or down, it wont make any difference, it stays muted.
Plus, if I try to shut it down, it always redirects me to the log in screen, always. The only way to turn down the laptop is, then, to unplug the wire.
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
How to make the mics work on a Dell XPX M1330 laptop. This seems to be a common problem with built in mics on laptops. I've tried all the obvious things with alsamixer and pulseaudio.
View 1 Replies View RelatedI have an issue where my laptop speakers work just fine, but when I plug in headphones, I get no noise. I'm using openSUSE 11.4.I found others with the same issue, but this guy's solution looks like he might be using some different version and his solution doesn't work (can't find the file he edited).
View 7 Replies View RelatedI have a problem with my sound card Microphone is working, headphones work but with kind of a low audio output, laptop speakers do not work at all. I have checked alsamixer and pulseaudio nothing is muted, tried all sort of different combinations and pulseaudio actually sees that mplayer for example is playing music, or skype is in videocall and using the sound device, but nothing is coming out of the speakers.
Laptop is Sony Yseries VPCYB15AG Alsa-info is [URL] Audio Device is 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) Drivers Loaded are :
[Code]....
i have a acer 8930g laptop with mint 7 installed can't get sound to work. found my way round the nvidia graphics to get the screen to work but lost when it came to get the pc speakers and sound card to worki have set the preferences to auto detect but at a loss as to the logical steps i need to take.
View 2 Replies View Related