Software :: XSL Translation Using Apache Xlan-C++?
Apr 8, 2011I want to use Xlan-C++ APIs to parse my XSL documents.
View 3 RepliesI want to use Xlan-C++ APIs to parse my XSL documents.
View 3 RepliesCan anyone explain why pat is used for. From my view i think that when I configure NAT it work as well as PAT. Is it true? And also why PAT is necessary?
View 9 Replies View RelatedIve been learning bash over the past 6 months or so and have written a few scripts etc and i have just downloaded julius to execute my scripts and a few commands with speech recognition, the example script that comes with julius to execute commands is written in python and the example works fine when executed but i would like to further extend and customize it but i dont know anything about python, so ideally i would like to translate it to bash as that is what i am learning/using at the minute and would like to learn/use one language at a time, translating it as i think im a little out of my league, i look at the script and sort of understand how it works but i dont know anything about python and my knowledge of bash is limited for use of translating languages.
the python script is:
Code:
#! /usr/bin/python -u
# How to use it:
# julius -quiet -input mic -C julian.jconf 2>/dev/null | ./command.py
import sys
[Code].....
In this case its the french accented e that is getting translated:[test]$ touch dd touch: cannot touch `351dd': No such file or directory the thing is the folder test is an smb mount. The windows server which is dropping files into it is able to make the file visible but the app running on the linux can't fetch it because the name is 'unexpected'if I create a file anywhere else e.g. in /tmp/ with the name response.txt it is fine. When I ls I see r?sponse.Can you advise me if I should be looking at the smb config AND the host config and give me some pointers as to where to get started trying to solve this.
View 3 Replies View RelatedIs there any method for placing translations in parenthesis at first occurrence? I need something similar to the acronym package, but instead, storing translations and printing brackets only after the first occurrence.
E.g. (pseudo-code):
Results in:
Do you like to eat bananas (xiangjiao)? No I don't like to eat bananas.
Following ishaqbaig thread about Gnome to KDE in Fedora.I'm thinking of dipping my toe in KDE waters (currently a die hard gnome user since FC5).I was wondering is there a "translation" guide for gnome users coming to KDE in terms of showing comparable apps, configuration guides/tips etc
View 3 Replies View RelatedI have now a second post on the work I am doing. I am trying to complete a model for translating English texts into German. My concept is a model using a text editor with only simple executable scripts being written to perform steps in the process. I need to use a language for doing simple things like tagging words and translating using a dictionary I am building. I am beginning to use AWK in conjunction with Bash and need to find some members with whom I can dialog on particular topics; even getting advice. Are there any AWK users in the community, using the language for processing text?
View 7 Replies View RelatedI have 3 translation tables,i.e,camp_generic_trans
camp_generic_trans_def
camp_generic_trans_epc
these tables exist in cntr1/cntr1@camABC1
I have to copy these tables from here to staging environment.
I need to first check if any of the tables exist in staging.If yes,then delete and create new. There are 4 staging env from 5 to 8.
I have to pass the staging environment as parameter to ask the user which environment does he want the tables to be copied.
Let me introduce this topic before I ask my question. When selecting the system language, there are different options that are based on the ISO-639 standard, which defines a code locale for each language and country. This allow us to select, for example, pt_BR (Brazilian Portuguese) or pt_PT (Portuguese form Portugal) as the language system. Then, if two variants of a language are in a different country, the ISO-639 can differentiate them this way.
But there are languages, for example Catalan, that have two variants in the same country. Then, the ISO-639 cannot differentiate them. Here is where the BCP-47 standard appears [1]. It adds a subtag to identify variants or other codifications (like sr and sr@latin) of a language. In the Catalan case, standard Catalan uses the ca_ES locale code, and the Valencian variant uses the ca_ES-valencia locale code (the subtag is -valencia). On systems based on Debian is possible to select this variants using the @ modifier. Then, if I define this LANG environment:
LANG=ca_ES.utf8@valencia
LANGUAGE=ca_ES.utf8@valencia
LC_ALL=ca_ES.utf8@valencia
The translation shown on the system is the ca@valencia (for example, in GNOME). GNOME is already translated into Catalan (Valencian) [2]. As well as KDE, OpenOffice.org, VirtualBox, Firefox and many others. Here is my question: How can I select the Catalan (Valencian) translation (not the standard Catalan one) when using openSUSE? I have tried modifying the /etc/sysconfig/language file, and defining the rc_lang to:
[Code]....
when i try to execute rpmorphan i receive this error, WARNING can not load translation file locale/en/rpmorphan_trans.pl
View 6 Replies View RelatedI'm using a Debian servers, as router/firwall.. I've two ethernet interfaces into the server, one for wan and one for lan. The i use SNAT so my LAN clients can access the internet throgh the debian router. That is working... Now i want to be able to access servers on the LAN site from the WAN site, and i wanna use port address translation (PAT). I have a FTP server running on a lan server, so i'm trying to portward port 21.
iptables -t nat -A PREROUTING -p tcp -i eth1 -d (WANIP) --dport 21 -j DNAT --to 192.168.1.2:21
When people try to access my FTP from the WAN site, they are redirected to the local FTP server, and they are promted for crendentials, but when the credentials are typed, and the local ftp server should answer the wan request, the connections dies.
The wan clients are being promted for credentials, so they are redirected to the local lan server, but after that the connections dies, so i think there is some kind of nat problem, when the local lan server is trying to respond to the wan request..
Here i my iptables script:
#flush table
iptables -F
#input regler
[code]....
what is the translation table and referance table in any DB (with referance to Data conversion)
View 2 Replies View RelatedAny one have an idea How to clear apache cache without restarting apache server.
View 5 Replies View RelatedI am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
I want to run a linux command with apache through web browser and that's is not working. and it's working properly when I execute this command through terminal, where is the problem?
NOTE: apache have the privileges to execute the command
http://test1.ch is the main page [url]is the sub page(alias) in another language(italian)
So that means every request on [url] should be redirected to [url]
I already tried: redirect permanent [url] but nothing happens
I have a host system which is running Ubuntu and a guest system which is running Debian_squeeze on qemu VM. I need to send created traffic from Ubunto to Apache2 web server which is running on Debian. I made a bridge, and I can access internet from Debian, but this access is limited! I can just open some URLs not all of them! My question is how I can access the webserver from ubuntu?
View 1 Replies View RelatedI installed fedora10 on my system with live cd.I started httpd service.I also set static IP address, subnetmask and default gateway as my proxy server.It is only accessible through http://localhost at the same machine.but I need to access it through http://ipaddress/ on my other LAN machines which has window operating system.
View 8 Replies View RelatedProblem: I have a working apache server running on my local lan. If anyone NOT on my lan tried to access my server, it will not show up.
What I have found:
The apache test page is visible on the fedora server.
The apache test page is visible on all of my computers on the lan
[code]....
I experimenting with snort IDS not that it is a problem to setup as I have done that and it seems to be working fine. However, I had to compile apache and php from source, for this I chose apache 2.0.63 and php 5.3.1. The problem is when I run a PHP script from a web broswer, I only get raw html or php code. This only happens when I run code associated with acid the IDS Console I am trying to setup. The apache test page is okay and so is the php test page.
View 7 Replies View Relatedalthough there is inbuild apache in my fedora9 , but i am unable install it by manually. Is it a problem , if already i have apache in my system?
View 1 Replies View RelatedI just 'yum installed' php and php-pgsql.I appear to have weak search-foo and cannot figure out how to enable php in apache ( the nifty php-info page does not appear, just the hello and world I put into the file before and after the php-info call ). My intent is to be able to use phpPgAdmin. So I will also need to enable the php-pgsql shared object. I need to add to httpd.conf and any other initialization that I need to do?
View 2 Replies View RelatedWhen try rcapache2 start
Starting httpd2 (prefork) startproc: exit status of parent of /usr/sbin/httpd2-prefork: 1
or
Warning: found stale pidfile (unclean shutdown?)code...
I need to install 32 bit on Suse 11 64 bit, how can this be done, the build option is not working due to openssl issues.
View 3 Replies View RelatedI've a server with opensuse 11.4 (from a 11.3 upgrade), but I can't run Apache.. I've tried latest version (official repository and Apache repository), but it give me always same error:
[error] (38)Function not implemented: apr_socket_accept: (client socket)
I've have removed and reinstalled apr/apr-utils also, but nothing..
I'm wanting to install apache so I can learn php, but I don't want it running allthe time. how can I run apache only when I want to
View 4 Replies View RelatedI have Ubuntu as my main OS, and virtualbox running Windows7 as a guest. I ahve just install xampp, but when i go to run apache2 it will not startup ... I am only wanting to use and access apache on the guest OS, as i use the guest OS for development ...
View 2 Replies View RelatedI'm running Ubuntu 9.10 in VirtualBox (OS X host) with Apache 2.1.12. I am developing in NetBeans on OS X and would like to FTP my code to Ubuntu to test on Apache. However, I'm not sure how to install mod_ftp in Apache on Ubuntu.
View 2 Replies View Related