I have a host system which is running Ubuntu and a guest system which is running Debian_squeeze on qemu VM. I need to send created traffic from Ubunto to Apache2 web server which is running on Debian. I made a bridge, and I can access internet from Debian, but this access is limited! I can just open some URLs not all of them! My question is how I can access the webserver from ubuntu?
View 1 RepliesIn a squeeze box, I installed awstats and it's working like a charm. Its cron job update the awstats database every 10 minutes (as it runs as root). But I would like to be able to update the statistics from the browser as well. So I setup everything as required and I gave "read" access to "others" to every apache log file. Now, a couple of questions came to my mind:
1. Am I compromising server's security giving "read" access to "others" to apache log files?
2. Instead of giving "read" access to "others", I could add www-data user to adm group (as apache log files are owned by root:adm and permissions are rw-r----). Is this more secure than giving "read" access to "others"? 3. If the option would be giving "read" access to "others" at the end, a log file would be owned by root:adm and its permissions be rw-r--r--. As apache rotates its log files, when Apache create a new log file, does it preserve the permissions (rw-r--r--) or create it with the default permissions (rw-r-----)?
Having some memory loss i think (in my head not my pc). I have set up apache before , then changed to dsl in the last week and cant seem to get this new modem/router to work. i can get the loopback address to work, as well as the network ip. can NOT get my other machines to hit the server on the network .
also no connection from outside the network from port 80. my modem is a motorola (att) ,apache2 on my toshiba laptop, amd x2, 3gigs ram.
I have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
View 6 Replies View RelatedI want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
Im trying to config my intranet to be accessible from inside the network (lan) without need of password and ask for a passwd for those who are viewing from Wan ....
Today my intranet can only be accessed from Lan, external access give me an Unauthorized message, I took look around, try #irc and still can get the appropriated help, I hope that someone here could help me on that...
A piece of my config:
Code:
I happened to be looking at my Apache-2.2.8 log on an Ubuntu LTS 8.04.4 system, and noticed a few lines like this:
Code:
61.160.212.242 - - [06/Mar/2010:07:04:41 -0800] "GET http://218.30.115.246/ HTTP/1.1" 200 295 "-" "-"
61.160.212.242 - - [06/Mar/2010:07:05:29 -0800] "GET http://218.30.115.246/ HTTP/1.1" 200 295 "-" "-"
xxx.xxx.xxx.xxx - - [06/Mar/2010:07:56:15 -0800] "GET http://218.30.115.246/ HTTP/1.1" 400 290 "-" "-"
(The third line is me telnetting to the server and trying to issue the same request. Note that I got a 400 error response, while the guy coming from 61.160.212.242 got 200s. Also, if you just open the http://218.30.114.246/ URL, you get back "hello" (nothing else, just 5 characters). I'm presently putting together a bootable CD with chkrootkit to run on the machine. (I found a thread that mentioned in passing that this was related to PHP, which I have running on that Apache server, but my Google-fu isn't strong enough to track down the original thread.) (After checking with chkrootkit: nothing unusual found.)
I have set up a hostname on dyndns.com and configured my router to forward port 8181, but I cannot view it from the internet (FF says "can't establish a connection to the server"). The DNS is ok, is just the apache webserver that doesn't work.
I can acces my webserver from
http://localhost:8181 (loopback)
http://192.168.1.1:8181 (in the LAN)
BUT NOT <hostname>.dyndns.com
Here is my site configuration
[Code]...
So, what's the matter? How can I reach my apache from the internet? Also, I read about routers loopback errors, but this seems not related to it, since I tried to get it through a proxy server, and it failed
just switched our company from windows server to linux and everything is going good except we have 4 vpn connections though out the country coming to our server. All giving the client machines ip addresses of 192.168.x.x based on where they are located 192.168.1.x for the main location 192.168.2.x for a second location etc, and IIS could see the clients ip instead of the wan ip and was setup to block all ips except 192.168.x.x ip's and this worked great.
So i set up apache the same way, to allow only 192.168 ip's but i guess it doesn't work that way in apache for connections coming though vpn? 2 out of our 4 VPN connections are not static IP's, so the 2 that are I just add that ip to the allow list and that worked.But i don't think we should HAVE to get static ips for the other 2, that's one of the benefits of using VPN, especially if our old windows server didnt need it.Is there any way for apache to see the clients ip address for access or is there something somewhere else that needs changed for this?
I can access dirac.org from inside my network; I can't access it from outside my home network. Apache is running on a Ubuntu box named "satan": 192.168.0.2 and I'm testing it from a MS Windows machine named "lucifer": 192.168.0.3. My ISP is optimum online, which does not filter port 80.
0. router
The router is a Netgear WNDR3700. All computers on my LAN receive their IP addresses via DHCP, but I've reserved all the IP addresses, so they are essentially static (satan is always 192.168.0.2, lucifer is always 192.168.0.3, etc). The router is set up to pass packets destined for port 80 to satan (192.168.0.2), which is where Apache runs.
1. tcpdump
Using tcpdump when accessing dirac.org from within the LAN (this is what works):
# tcpdump -i eth0 host ool-18bda2d2.dyn.optonline.net and tcp port 80
ool-18bda2d2.dyn.optonline.net.2826 > satan.www: Flags [S], seq 3934453911, win 65535, options [mss 1460,nop,nop,sackOK], length 0
[Code].....
I'm having a problem when I try to connect to my apache2 server from any client in my network using the .local address with the firewall on. I opened the port 5353 UDP but I still can't connect. The only way I can connect is disabling the firewall which I don't like to do on the server. What I'm doing wrong?
View 9 Replies View RelatedSounds a bit odd but I'll try explain.My files I want to use in my apache folder now tell me I dont have permission to access them. When I change the permissions again, they just go back to blocked again.
I have Ubuntu 11.04
I have a Name-based virtualhost website in Apache, what i want to do is to disable direct ip access to the site and allow only through web address (www.mysite.com, and not through xxx.xxx.xxx.xxx). Or at least show a default page / not found page
I presume this can be acomplished with Mod_Rewrite and .htaccess but i just wanted to know if there is a more global option for this
I have googled this a lot but i can only find posts related to ip host restriction rules, which is not what i want
I have web server apache on linux Centos. I can access it successfully by typing on the address bar http://localhost, 127.0.0.1 or 192.168.0.150 from the local computer server and the site loads normally with graphic. When I access the site from another computer in the same local network, I don't get the correct website. I see the site like html as text not graphic. Please see below text file output from the browser: Also I can only access the site by typing 192.168.0.150 IP address in the address bar. When I type http://localhost or 127.0.0.1, the site does not come up. Do you see what I did wrong? How can I fix this problem.
View 7 Replies View Relatedi have already configured a domain in my server. now i have configured multiple local ip addresses,can i configure a domain for each local ip address. is it possible. if possible how can i access the web page through apache.Because already i am accessing the web page for a pre-configured domain from the path /var/www. if i able to create new domain.From where the apache fetches that index.html file, when requested through browser.
View 5 Replies View RelatedI am running an apache server thru webmin, on a 8.04 install. Attempting to install awstats I have realized that access.log stopped writing some months ago. Went back thru the error logs and found I had deleted the virtual server, and started a new one. Everything else works fine, it never even occurred to me that logging would not also be restarted. I would just like to get it going again, any clues???
View 5 Replies View RelatedI am getting this error whenever I access the page:
Code:
PHP Warning: fgets(): supplied argument is not a valid stream resource
Any idea whats all about?
I explored and found it permission issue.
I want to put a user call paul in apache group.Any idea how can I do that?
I have been following the steps mentioned at [URL] Now I want to add authentication through .htaccess.
View 1 Replies View RelatedI am running a syslogd on my ubuntu 10.10 system. I have a apache2 server on the same machine. I have configured my apache2.conf file to send the error logs to the local syslog server.
The config is as under :-
LogLevel notice
ErrorLog syslog:local1
I have also configured the /etc/syslog.conf as under :-
local1.info /var/log/apache2/error_logs
I have created a file in the /var/log/apache2 dir with the ownerships and permissions as under:-
-rwxrwxrwx 1 syslog adm 77 2011-08-11 18:14 /var/log/apache2/error_logs
Next I restarted the sysklogd and apache2 servers with a service command as under:-
sudo service sysklogd restart
sudo service apache2 restart
I thereafter observed the /var/log/apache2/error_logs file and found the entries for apache2 closing down and coming up as under:-
Aug 11 18:14:14 cc apache2[4940]: [notice] caught SIGTERM, shutting down
Aug 11 18:14:19 cc apache2[5282]: [notice] ModSecurity for Apache/2.5.12 [URL] configured.
Aug 11 18:14:19 cc apache2[5282]: [notice] Original server signature: Apache/2.2.16 (Ubuntu) mod_ssl/2.2.16 OpenSSL/0.9.8o
Aug 11 18:14:20 cc apache2[5285]: [notice] Apache/2.2.16 (Ubuntu) mod_ssl/2.2.16 OpenSSL/0.9.8o Microsoft-IIS/5.0 configured -- resuming normal operations
Now the problem is I donot get any other messages thereafter. So it is hardly useful. How can I increase the logged messages from apache. I tried the facility:
local1.*
Then restarted the sysklogd and apache2, but the contents of the /var/log/error_logs file remained similar. Next, I followed the link. I created the perl script for recording access logs of apache2. I then restarted the apache2 and sysklogd. when I opened my website from a browser, the access log did not work. I think I am getting something wrong with the facility value , in apache2.conf it is ErrorLog syslog:local1 ! but the script is suggesting that it should be local2 in the line 4
openlog('apache','cons','pid','local2');
I therefore changed the script to local1 in above line. But still no access log?
I have a fresh fedora 13 install, I managed to browse and setup my phpadmin.....and browse everthing locally. I can not browse the web site from any other machine in my network. All my machines get their IPs from my dhcp (192.168.1.0).I googled and read a thread in this forum, I understood it might be due to SELINUX. I disabled it, rebooted, still have the same behavior, browse my apache locally but not from other machines. I did a telnet from one of my machines using the IP as followstelnet 192.168.1.11 80got the following onnecting To 192.168.1.11...Could not open connection to the host, on port 80: Connect failed.I checked error-log and access_log file, found no hint. I think it should be something related to some fedora systemor firewall or selinux config that is not allowing access to it.
View 4 Replies View RelatedI am looking for the best way to set up permissions in the following situation. I have a web server set up on debian. I have different web sites in /var/www. Each web has a group of developers who each have system users and ssh access to the server. For example i have a web site in /var/www/example.com and a group of developers in group exampledev. I need all the users in exampledev plus the apache user (www-data) to have read write and execute permissions on all the content of the web site. I can give the group exampledev these permissions without a problem. The problem is that when they modify or create new files (they either connect via ssh o sftp which is the same right?) they are created with their user and group rather than exampledev. Am i going down the wrong path? This must be a common situation but i haven't found the solution.
View 5 Replies View RelatedWe have Apache installed on CentOS 5.3 in our laboratory. Indeed the server is running fine for almost two years since it is actually the first CentOS 5 that was released just regularly updated. Now, most of our applications are custom made PHP applications and until now we somehow managed to avoid using PHP to fetch files that are on the internet itself. But now we are desperate because we need to allow PHP to fetch files through Apache but it seems as if Apache is not allowed to make a connection to the outer world. Additionally we use a proxy server to connect to the outer world so right at the beginning http_proxy is used to set that environmental variable. And for the root user it all works fine after that but it seems as if the apache user is not allowed to access the internet. Just to make a remark our web server can be accessed from the outer world so its a one way street for now.
View 1 Replies View RelatedI have installed Apache on Centos, had no issues during setup, httpd seems to be running but I can't access my slice through [url]. It looks like Apache has some issues or something?
View 2 Replies View RelatedI was unable to access my dedicated server for few minutes. I have checked the apache error logs and found below notice:
[notice] caught SIGTERM, shutting down
I have tried to search from Google but could not find much information about this error.
Unable to access Apache from remote server..
Also, my php pages won't load..and php is installed.
I'm trying to set up a computer to allow a specific samba user to access and write to a folder on the web-server without any luck. I've tried creating symbolic links in the users home to the folder (/var/www/html/something) on the web server and from the server to a directory in the users home but neither seems to work. I haven't seen any errors from SELINUX either but I'm kind of stuck. Also tried adding a directory section and alias line to the httpd.conf but after doing that apache wouldn't start so I'm not really sure how this would be done properly.
View 1 Replies View RelatedMy first message on this forum, I'm a new comer in the Suse world (after 10 years of debian, ouch) I really like this distro so far. Fast, clean, simple. I got an "acess denied" issue with the apache configuration though. I've installed apache through yast and configured it with yast-http. Permissions are okay and a index.htm file is in the directory.
I won't ask for a direct answer cause everything can be found on the wiki. However, I'm surprised that configuration files are not erased when the related software is uninstalled. I've spent the afternoon trying to make it work so I guess the config files are spoiled right now. I tried to erase all the config file but can't find the yast-http ones, so it does not launch the wizard like the first time. yast-http also warns about my network ruled by NetworkManager, and that it could not run properly with it, how come?
I'm trying to set up a small Intranet system to run OpenERP or similar using browser-based clients. I have an Ubuntu machine running 10.04 desktop edition to act as a temporary/testing server until we set up a proper, dedicated machine with 10.04 server edition. I have installed Apache2 from the repos and it is up and running fine - locally. That is the problem, I can't access the server from other machines on the LAN. Ping works, btw. So I've been reading tutorials and howtos for the past week, but for the life of me, I can't find what I'm doing wrong. The standard Apache setup seems to be made to "just work", so although I've looked at the various configuration files mentioned in the tutorials, I haven't actually changed anything.
View 9 Replies View RelatedI have recently installed a LAMP server on Ubuntu 10.4 nd I would like to have the /var/www folder writeable and accessible by my other computers on the LAN. I know I have to install Samba but how do I configure it so I can map network drives to the WWW folder and allow read and write access?
View 2 Replies View Related