Problem: I have a working apache server running on my local lan. If anyone NOT on my lan tried to access my server, it will not show up.
What I have found:
The apache test page is visible on the fedora server.
The apache test page is visible on all of my computers on the lan
[code]....
I know what I need to do I just cant seem to achieve it and that is correctly setup a DNS server that works over the internet, I'm using BIND9 with webmin. I have Fedora 14 - Apache is install its all working locally, so this final step I just can't grasp to be honest.
View 14 Replies View RelatedI can access dirac.org from inside my network; I can't access it from outside my home network. Apache is running on a Ubuntu box named "satan": 192.168.0.2 and I'm testing it from a MS Windows machine named "lucifer": 192.168.0.3. My ISP is optimum online, which does not filter port 80.
0. router
The router is a Netgear WNDR3700. All computers on my LAN receive their IP addresses via DHCP, but I've reserved all the IP addresses, so they are essentially static (satan is always 192.168.0.2, lucifer is always 192.168.0.3, etc). The router is set up to pass packets destined for port 80 to satan (192.168.0.2), which is where Apache runs.
1. tcpdump
Using tcpdump when accessing dirac.org from within the LAN (this is what works):
# tcpdump -i eth0 host ool-18bda2d2.dyn.optonline.net and tcp port 80
ool-18bda2d2.dyn.optonline.net.2826 > satan.www: Flags [S], seq 3934453911, win 65535, options [mss 1460,nop,nop,sackOK], length 0
[Code].....
When I do " ps aux | grep apache " I can see that apache2 is running. But when I do the same thing for http or httpd there is nothing. I looked for this question in the forums but couldn't find it. I probably don't know just what to look for.I'm using the new Debian Squeeze, and was fooling around heavily with new software installations and modifications, and just noticed all of a sudden that I couldn't get on the internet - so I know I did something but don't know what.I can plug in a thumb drive with a bitnami joomla stack on it and run, " ~/tmp/joomla-1.6.0-0/./ctlscript.sh start "and that gets things going for the joomla stuff (apache, http, mysql, php), but that stuff is pretty self contained and does not effect the browser's attempt to reach the web.
View 12 Replies View RelatedWe have Apache installed on CentOS 5.3 in our laboratory. Indeed the server is running fine for almost two years since it is actually the first CentOS 5 that was released just regularly updated. Now, most of our applications are custom made PHP applications and until now we somehow managed to avoid using PHP to fetch files that are on the internet itself. But now we are desperate because we need to allow PHP to fetch files through Apache but it seems as if Apache is not allowed to make a connection to the outer world. Additionally we use a proxy server to connect to the outer world so right at the beginning http_proxy is used to set that environmental variable. And for the root user it all works fine after that but it seems as if the apache user is not allowed to access the internet. Just to make a remark our web server can be accessed from the outer world so its a one way street for now.
View 1 Replies View RelatedI set up a mail server today. Everything works except I can't access the damn squirrelmail web interface from the internet.
I followed this guide here: [URL]
I can access http://192.168.0.50/squirrelmail just fine from a computer on my local network.
*BUT*
When I access http://mywanip/squirrelmail, i get a connection timeout.
When I access http://mywanip, I get the standard Apache "IT WORKS!" Page. (Rules out port forwarding)
According to the guide, that should allow me to access squirrelmail from the internet on my server. Its as if Squirrelmail is only available on my local interface and not on my wan interface? How do I check?
I can connect to anything locally, I can SSH in locally but nothing works from outside my network (can't access pages in apache, can SSH, etc.) I've checked the logs I can think of, but what should I be looking for? The last thing I did today was add a FW rule to log and drop from an IP, saved my iptables to a file in /etc. (this was at 10:45am). The last time I successfully logged in remotely 1:03pm. I connected multiple times in between. I've rebooted remotely once or twice. That's it. I've already flushed iptables.
View 1 Replies View RelatedI've installed apache2 on ubuntu 10.04 and everything works fine, but when I use functions that needs to connect to Internet, it doesn't work. Is there a simple setup I've forgot? I've been searching and looking for a solution, but I'm stuck!
View 9 Replies View RelatedI've searched the forums (250 thread limit) for a fix on this, but all the questions seem unanswered or unrelated. My situation is this: I'm running Ubuntu x64 10.10 'Maverick'. I have a cablemodem connection for my Internet access. I have home network running on DD-WRT with the dreadful Linksys WRT54G series router.
My DD-WRT router is 192.168.1.1, subnet 255.255.255.0.
My Linux box is 192.168.1.61, subnet 255.255.255.0.
I have a VyprVPN connection set up successfully on Linux. Mostly everything works great, speed's fine, latency is what I expect it to be. Except... I also run an SSH server to remotely admin the box at port 22, an Apache server running over SSL at port 7001, and a Transmission web client at port 7002 (only secured by basic HTTP realms auth). All of these things worked before I got the VPN working, I'm of course using NAT at the DD-WRT router.
The endresult I am looking for, is to have the security and protection of the VPN (even if it's only perceived) for everything I do on this machine -- EXCEPT on Apache, the Transmission web panel, and the SSH server, which I want to access from the outside world. I have no firewalls running or configured, not even iptables, not even the SPI firewall on DD-WRT. All connections to the aforementioned services from the outside world timeout coming in to the Linux box. They all work from inside my home network (182.168.1.0/24). In case it's needed, he's my routing:
[Code]....
Any one have an idea How to clear apache cache without restarting apache server.
View 5 Replies View RelatedI am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
I've tried to copy my files from Xamp httdocs in windows to /var/www/html,but I can't paste the file, what should I do so I can paste the files ?I have logged in as a root
View 5 Replies View RelatedI installed fedora10 on my system with live cd.I started httpd service.I also set static IP address, subnetmask and default gateway as my proxy server.It is only accessible through http://localhost at the same machine.but I need to access it through http://ipaddress/ on my other LAN machines which has window operating system.
View 8 Replies View RelatedI experimenting with snort IDS not that it is a problem to setup as I have done that and it seems to be working fine. However, I had to compile apache and php from source, for this I chose apache 2.0.63 and php 5.3.1. The problem is when I run a PHP script from a web broswer, I only get raw html or php code. This only happens when I run code associated with acid the IDS Console I am trying to setup. The apache test page is okay and so is the php test page.
View 7 Replies View Relatedalthough there is inbuild apache in my fedora9 , but i am unable install it by manually. Is it a problem , if already i have apache in my system?
View 1 Replies View RelatedI just 'yum installed' php and php-pgsql.I appear to have weak search-foo and cannot figure out how to enable php in apache ( the nifty php-info page does not appear, just the hello and world I put into the file before and after the php-info call ). My intent is to be able to use phpPgAdmin. So I will also need to enable the php-pgsql shared object. I need to add to httpd.conf and any other initialization that I need to do?
View 2 Replies View Relatedi am having a lot of challenges in changing my httpd conf file of apache 2.0 to 2.2. these conf files are customized according to our serever. now i am getting error in the load module. any link where in i can check for the difference.
View 1 Replies View Relatedi have changed the permissions of tomcat folder stiill firstly,i did this
[whacko@localhost local]$ /usr/local/tomcat/bin/startup.sh
Using CATALINA_BASE: /usr/local/tomcat
Using CATALINA_HOME: /usr/local/tomcat
[code]...
I've installed a server (CentOS5.2) - and I need a new(er) PHP, so, I get me one. This is what I did:
- unzipped the bundle in the root's home
- of course, I entered the folder
- entered "./configure"
- entered "make" - the compile didn't come back with errors
- entered "make test" - there was a _possible_ fail...
- entered "make install"
I noticed there's nothing in the /libs, where I'd expect a module (lib5php5.so) to exist. there is one, but it belongs to the older PHP. It's located in ets/httpd/modules (a link BTW - but I think that's normal). At the console I type:
"which php" and get a path to PHP /usr/local/bin/php
"php --version" and get 5.2.8 and some extra info
in the server I entered "<?php phpinfo(); .>" in a PHP page, as I call that page, I get ... 5.1.6 as version.
Of course, I suspect Apache to have the OLD PHP in its config, (the old lib5php.so) and that I may have to overwrite the old one with the newly compiled one, if I had it. I ran a locate on the system, but no other lib5php.so files exist. Where did I loose track?
I can connect to localhost, and get the test page.However, as soon as I install the apache PHP module, with:[root] # yum install php apache will not restart.Watching active processes with qps, I see apache tries to start, but then it crashes - hence it writes to the error log to say it's started. But there's no PID in /var/run/httpd, and I cannot connect to localhost.
View 6 Replies View RelatedI'm getting 403 Forbidden error when I hit [URL] I disabled SELinux after trying some options. I still get the forbidden error. I've tried [URL] and [URL] as well, with same results.
[Code]....
I am trying to get an internal webserver running and I am having issues with php. When I make a file (index.php) it runs perfectly. I can use PHP superglobals for the most part but the minute I use 'name' (ex: 'index.php?name=someone') I get a 403 forbidden. I thought for a while that it was something with all superglobals but if i change the code to use another variable it works fine.
works: ('index.php?person=fedora')
Code:
<?php
echo 'Hello ' . $_GET['person'] . '!';
?>
403 forbidden: ('index.php?name=fedora')
[Code]...
I have no idea if this is a apache issue, a php issue or something else random. I disabled SElinix in attempts to fix this, changed the owner and group to me and root and nothing seemed to have any effect. I also checked the document permissions in the httpd.conf and they all look correct.
FedoraVersion 12 ConstantineNoyau Linux 2.6.31.12-174.2.3.fc.x86_64Gnome 2.28.2Memory 871.4 MoAMD Athlon LE-600Free disk 71.5GoSelinux is deactivated.Httpd doesnot start and, when I start "onfiguration des services", and click D�marrer, it runs for ever, but never starts Apache...
View 8 Replies View RelatedI have now blown Windows XP away completely and done a clean install into 80Gb hard disk (x86). I know that httpd is running and I've added the snippets to httpd.conf that output server status and server info to the web browser, so I can see that all the required PHP stuff is loaded. So something like http://localhost/server-info works fine but something like http://localhost/helloworld.htm produces the wrong output:
contents of helloworld.htm:
<?php>
print("hello world");
print(phpinfo());
<?>
[Code]....
I moved from F12 to F14, I've installed using yum Apache, MySql, php, phpMyAdmin. That all works fine, I've made index.php with phpinfo() function and if it is in /var/www/html/ it opens in web browser. I extracted daloradius-0.9-8 in /var/www/hmtl/daloradius folder changed ownership to apache:apache set alias to myradius. When I point web browser to localhost/myradius I get error 403, forbidden. I moved index.php with phpinfo() to daloradius (overwriting old index.php) and same stuff happens. Error 403. What am I doing wrong?
View 4 Replies View RelatedI started the mission to call my GLPI system from a hostname URL... i dont want use the IP address... but im dont know what i do!
I have Fedora 14 installed on VirtualBox running with the network interface bridge mode, fix IP address and in the dns server the name that i want is already registered... i have direct access to the network and the apache and mysql works fine... and here in my office we have a windows 2K3 domain controller and all the computers are logged in the domain... i dont know if i have to put the fedora linux in the domain or just configure something to work...
Today for use the glpi system i have to put in the URL bar: [url]
But i want: [url]
I allready look for the samba configuration to put fedora into domain, but dont works...
I was working on my Drupal test site (running Fedora 11) when it froze. I had to hold down the power button to get it to shut off. When I booted back up, I received the error message "Your system had a kernel failure" after logging in. When I tried to access my test site's ip address or 127.0.0.1, I get the error message "unable to connect". However, I can access and log into Webmin (version 1.440) at 127.0.0.1:10000. Then I noticed that my Apache Web Server (Apache version 2.2.15) was not started. When I try to start it, I get the error message:"Failed to start apache. I'm using Fedora 11, Drupal 6.2 and Apache version 2.2.15.
View 1 Replies View RelatedWe have apache installed at a directory other than the default location. There are two httpd.conf files on the server, one at the apache installation directory, and the other one is the default one at /etc/httpd/conf. The apache ran very well with the customized httpd.conf before, but after I installed php 5, the server seems taking the default httpd.conf and doesn't display the html pages which are installed at our apache directory. How to let the server know not to use the default httpd.conf and use the customized one instead?
View 3 Replies View RelatedI'm attempting the lovely task of uninstalling Apache 2.2 and installing Apache 2.0 on CentOS 5. This is because of my original task of installing RSA web agent which only works with Apache 2.0. I also am not allowed to just install CentOS 4. I uninstalled Apache 2.2. Attempted to install Apache 2.0 (with rpm) and got multiple dependency errors. I installed the dependencies (and sometimes their dependencies including a little dance around some circular dependencies). Then I installed Apache 2.0 with no errors. However Apache failed to start.
Here is the error:
httpd: symbol lookup error: /usr/lib/libaprutil-0.so.0: undefined symbol: gdbm_errno.
Please don't tell me it "seems like you're missing your gdbm libraries." I'm not. I'm assuming I'm having a version incompatibility issue between gdbm and libaprutil. I just don't know what version of which I need to make Apache 2.0 happy. I tried uninstalling gdbm and installing an older version but I still have the same problem. Another option is to uninstall my openldap package (2.3.13-2) which I just installed and install an older version of that but again don't know which version is right.
I have to go through an ERP projects. "README" file to setup the software gives following instruction which I have attached with this thread.So, according to first step I copied the entire "dolibarr-2.6.1" folder in "/usr/local/apache2". But whenever I call the browser with address given in "README" file my browser gives the following error message : Code: Firefox can't establish a connection to the server at localhost.Please let me know how can I configure the Web Server so that I can use the software.
View 1 Replies View Related