I have a very annoying problem. The server I've setup works perfectly but there is a glitch. I cannot dig it out, why I cannot login to server everyday at evening. In the morning next day I can login to server without any problems. Is this server problem or ISP's problem? What can I do to diagnose there glitch?
View 3 RepliesI like the server login information that gets displayed when you login to a 10.04 server. It lists disk usage, CPU usage, Temperature etc...
Unfortunately I had problems installing 10.04 from a USB. At the end of the process the master boot record was stored on the USB and not the hard disk.
But now when I login to my server I don't get the server information.
I am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.
View 4 Replies View RelatedIs it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedI recently setup an email server on Fedora Core (14). Sendmail is running and I am trying to authenticate from a client pc using imaps. I installed Cyrus-imap and it is running and listening on 993. When I try to login, it doesn't accept authentication even though I verified the user's password is correct. (tested with ssh)Is there something I have to do with Cyrus or on the server to allow connections to email? I have not used Cyrus before. I am attempting to access my mail folders via Sendmail and did not make mailboxes in Cyrus. I did allow imaps through the firewall.
View 1 Replies View RelatedI am facing login issues when i try to login as admin using phpldapadmin into ldap server. Installed phpldapadmin for administering ldap server from the repository:
1)[url]
2)yum install phpldapadmin
Able to see the default phpldapadmin login page.
ldapadmin throws the error as "Bad username/password.Please try again"
But when i login as anonymous i am able to login but the web page asks whether to create the root domain?
whether anything needs to be done for making it login as admin.
The details of my set up are as follows:
My slapd configuration:
ENV: openssh-server-5.4p1-1.fc13.i686 Problem: I am unable to ssh using Putty (when using ssh-auth/pki) to a fedora box . I get the message: Server refused our key. Here's what I tried so far:
- Tried generating rsa (as well as dsa) keys on the linux server and put the generated public key in the ~/.ssh/authorized_keys. Then I converted the private key using PuttyGen.
- Also, tried generating keys using PuttyGen and then converted the public key and placed it on the server
- Configured the sshd server (ssh_config) for using RSAAuthentication=yes. Tried all combinations and purmutations; however, I still get the "Server refused our key" error.
We have a CentOS server which has beed restarted due to some reason. Now we have ping to the server and we can reboot it via KVM, but the server loads to some messaageThis is filter.unknown_domain (Linux ...)Filter Login:and then it stops. Do you have an idea what might be the problem and how can we fix it?
View 2 Replies View Related\Actually i lost the login details of my server so im recovering it in rescue mode.what i want to ask here is if i restarted my server what i need to do in order to work as it was before.on my server samba and dhcp server is configured.will my client users can access there network if login page comes or i need to do something else such as restarting services or not.
View 1 Replies View Relatedi want to login ssh server without password.i tried the below link but still i could not able to login without password authentication.
View 1 Replies View RelatedI've just upgraded (finally) to 10.04 desktop, and when I boot, I get a login screen, which is quite usual, but once I log in, the machine drops to terminal, instead of the usual GUI. I've tried running startx, but I get this error message. Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again.
View 1 Replies View RelatedI followed the instructions at [URL] but its a no go! My connection just hangs like it can't find the server. I can ssh into it using the username and password I setup, but can't ftp, what gives?
View 2 Replies View RelatedI recently setup a new server that serves files over samba and is a subversion repository for a number of projects. I did a simple apt-get update/upgrade for which the system requested a reboot. After I rebooted, I got to the login prompt, at which point I ran into a problem. After I enter my correct credentials, it spits out the following error:
sh: error while loading shared libraries libc.so.6: cannot open shared object file: Error 24
And returns me to the login prompt. Samba and Subversion are both still working, I simply can't login to the server either physically or via SSH. I have logged into recovery mode and tried reinstalling the package as well as doing a full system update which hasn't changed solved the issue.
I have the desktop packages installed as well but the system is configured to go to the console on boot.I would like to make it run a script once the user has logged in...
View 4 Replies View Relatedjust installed server edition... and is there a way to automate the server login?or through ssh because i want to get rid of the monitor i have plugged into it
View 1 Replies View RelatedI recently installed iFolder server on my 9.0.4 desktop computer.
I cannot login as a user using a web interface or client. Using the correct password, it takes a long time, then tells me that the login may be incorrect. With an incorrect password, it tells me this immediately.
I am able to login to the web admin interface, but the "System" tab will generate the following error after several minutes. code...
I'm getting some weird behavior when I log in via ssh to a ubuntu server. When I log in, there is only a $ at the command prompt, no user name. The arrows don't work, they just put the arrow characters in the prompt. Everything else seems to be ok. Also, when I say logged in as User, I meant a new user I just created.
View 2 Replies View RelatedI just installed 10.04 LTS and installed mysql-server 5.1. During install I had to enter a password and verify it. Standard procedure. But now I cannot login.
root@mycomputer:~#mysql -u root -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)
mysql is running and nothing in mysql-logs. I rebooted the machine and reinstalled mysql-server several times using the following commands: apt-get remove --purge mysql-server mysql-server-5.1 mysql-server-core-5.1 mysql-common and apt-get install mysql-server mysql-server-5.1 mysql-server-core-5.1 mysql-common
I tried a different password or an empty password on my reinstall-attempts, but nothing changed. I couldnt find a way to access mysql.
I've got a new installation of 11.04 server. Everything was apparently working just fine, and then the system hung. I rebooted, and everything looked good up to the login screen. After I typed my password, the screen started looking good, and then got all fuzzy and messed up (nothing was readable). The only way I could get anything back was to reboot. (I am able to work via ssh at the command line, though). As the graphics were fine before (using GDM), and since the GUI looks fine at the login screen, I know the system can do it.
I tried to find information on what might be going wrong, and haven't been able to find anything that fixes the issues. I thought there might besomething in my config, so I tried logging into another account on the system that doesn't have any user-level configuration, and got the same result (the machine's main purpose is to be a mail and file server). So it appears to me that something is happening to the graphics configuration after login when GDM loads. What I need to change?
I setup logging in through putty client with keys, and password disabled, could log in from all machines on my network (xp and 7) with putty.When I finished hut down the server.Today I turned on the server box and thought I'd try logging in through putty. It kept telling me the server was rejecting my key.I plugged in a monitor and keyboard into the server and logged in via password then had no problem logging in through putty client.Question is, every time I shut the server down do I have to plug in the monitor and keyboard, then login, to be able to login remotely?
View 8 Replies View RelatedI'm trying to set up NX to let me remotely access a Centos 5.4 machine, and I'm unable to log in.
I try to login using the official client on Windows XP, and the official server on the Centos machine (but I got the same errors with the freenx server in the repos). I input my normal username and password, that works locally and over ssh, but I get "Authentication failed for user username". The 'details' button is greyed out.
The client's ssh server listens on a high port, not port 22. (That port is forwarded by the router at the server's site.) Perhaps this is the source of my problems.
The user's ~/.ssh/authorized_keys2 looks a bit odd,
Code:
no-port-forwarding,no-agent-forwarding,command="/usr/NX/bin/nxnode" -----BEGIN DSA PRIVATE KEY-----
(Yes, that's it, it ends after begin dsa private key).
[Code].....
I have a Debian and a Ubuntu box. I installed a samba server on Debian box. I can log in the samba share folders from Windows boxes. Since the samba server has SHARE security mode, I need password only. But when I try to log in the samba share folders from Ubuntu box using nautilus, it asks username, domain and password. I cannot log in share folders on the Debian box. There is no message. Nautilus keep showing the password input box until i cancel it.So I use smbmount command. It works well. But that way is not comfortable at all. Anyone can help me logging in samba share in nautilus?
View 1 Replies View RelatedThis is a very trivial thing, but when I SSH into my newly updated 10.04 server, the stats of the server are displayed on the screen twice. How can i fix it to just display once? This is what it is doing.Quote:Linux xxxxx 2.6.32-21-generic-pae #32-Ubuntu SMP Fri Apr 16 09:39:35 UTC 2010 i686 GNU/LinuxUbuntu 10.04 LTS
Welcome to Ubuntu!
* Documentation: https://help.ubuntu.com/
System information as of Tue May 4 08:41:22 EDT 2010
[code]....
I am still having a problem with pulseaudio. When I login I have no sound. I have to click on the pulseaudio applet on the panel and select default server. I hear a sound and I am good to go. Any suggestions out there?I have a related thread, the link is below.HTML Code:[URL]
View 1 Replies View RelatedYears ago I was able to set this up, but my old method has become obsolete. How do you do it today with Ubuntu 10.10?I want:* A VNC server always running* The server should start at boot time* The user should come to the login screen of ubuntu and need to loginI have Googled, but there are so many versions of this and none of those I tried solve all of the above requirements.
View 4 Replies View Relatedi just installed ubuntu server edition 10.10, install said it was successful, but instead of loading a normal login screen it takes me to a screen that says exactly this: Quote: Ubuntu 10.10 computer name ttyl computer name login: Im wondering if this is normal or did the install go wrong somewhere, and not report it and if there is a way to fix it.
View 2 Replies View RelatedAfter updating my system to kernel 2.6.35-28 via the update manager my system now boots to a sever tty terminal and asks to log in. Once I log in and type start x at the prompt the system will load the sign in screen and all is well. I downloaded a boot info script from here
Code:
http://bootinfoscript.sourceforge.net/
This produces a results text on the desktop
[code]....
My mother runs Ubuntu 10.04 on her home computer, but on her workplace they use some version of Windows. Her IT-guy sent her a .rdp-file for logging in to her workplace server. This file doesn't work in Ubuntu, and the IT-department at her job can't solve the problem. Ergo; She's unable to log on to her workplace computer/server from home.
View 3 Replies View RelatedI just did "do-release-upgrade" from ubuntu 9.10 > 10.04 > 10.10 > 11.04 which successful but after a restart, no login console just a blinking underscore. However I still able to login to server using ssh. During the boot I saw this failure "Starting system V runlevel compatibility [fail]".
View 4 Replies View RelatedI installed dtc, dtc-postfix-courier and a few other depend software. When I re-started the server, I was unable to login with my usual login information. I am able to go to recovery mode to change the password but I am still unable to login to the system. Essentially, only root is able to access data on the server.
View 14 Replies View Related