\Actually i lost the login details of my server so im recovering it in rescue mode.what i want to ask here is if i restarted my server what i need to do in order to work as it was before.on my server samba and dhcp server is configured.will my client users can access there network if login page comes or i need to do something else such as restarting services or not.
View 1 RepliesI have read a lot of threads about this topic and tried everything as best of my knowledge but I still can not make it to work.Need specific directions on whats wrong, missing or how to debug the problem.Here is the DHCP error:
14:49:05 Unable to add forward map from service2.example.com. to 192.168.1.150: timed out
14:49:05 DHCPREQUEST for 192.168.1.150 from 00:04:75:d3:9f:27 (service2) via ETH02
14:49:05 DHCPACK on 192.168.1.150 to 00:04:75:d3:9f:27 (service2) via ETH02
[code]....
I'm trying to make a DHCP server work on my CentOS 5.4 box, but I have placed it on another subnet than the one that it is going to serve. I use a helper address on my router to make the the DHCP requests being routed to the DHCP server on the other subnet.
dhcpd.conf file:
ddns-update-style interim
ignore client-updates
ubnet 10.160.195.160 netmask 255.255.255.224
[code]...
i've installed bind and dhcp. I'd like to update dns automatically by dhcp. For the reverse-lookup-zone everything works fine. But for the forward-lookup-zone there is still the message denied. But i cannot see a mistake.
dhcp:
#
#
# DHCP Server Configuration file.
[Code]....
This dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies View RelatedI'm having mysterious wired network problem with my Karmic/9.10 machine. It hasn't been in network a while, but now I finally got the cabling done. I can't get the IP from dhcp server (TW-EA510), and static settings doesn't work either. Fresh cabling showed OK 1Gb connection on tester, and win7 laptop works fine. I even tried with long cable though the rooms, but it doesn't help, so it definately isn't the new cabling.
Log from the router after issuing #"dhclient":
Feb 16 23:01:43 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:43 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:01:49 DHCP SERVER: DHCP request from 00:1b:ea:c8:a0:ba
Feb 16 23:01:49 DHCP SERVER: DHCP ack to 00:1b:ea:c8:a0:ba
Feb 16 23:01:54 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:54 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:02:03 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
[Code]....
Motherboard is some old Lanparty with two ethernet ports, NVidia CK804 and Marvell 88E800 rev 13 Gigabit netwok adapters, neither of them works. At least another of them has been worked earlier when I last got it wired. It's been a while, so I'm not sure which one of them and with different router if that matters.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedI have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View RelatedI'm no expert on DHCP. My problem is that i have a CentOS 5.5 server on which i want to install a DHCP server. I have two NICs where eth0 has access to the internet and where eth1 should act as an DHCP server.
I have installed dhcpd and this is how my dhcpd.conf file looks like.
Code:
ifconfig looks like this
Code:
When i start dhcpd on eth1 i get no error messages but when i connect any devices to eth1 they don't get any IP. I cant find anything in any logs about devices trying to get an IP address. I dont have any firewall rules in iptables.
I'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf
#
# Configuration file for ISC dhcpd (see 'man dhcpd.conf')
[code]....
On a remote system, when all you have is the ssh CLI -
How do you find out the ip addresses for:the Gateway
the DHCP server
the DNS server
Don't need to make any changes.
Which commands will display this info?
I have come across this option given below in dhcpd.conf file for DHCP Server configuration. Can any body let me know what this option is all about.Code:option T150 code 150 = string;
View 2 Replies View RelatedI was trying to have access from a browser to the squirrelmail configtest page in my server, making some changes, I accidentaly remove the directory webmail. After I replace it with a backup apache2 can not start. This is what I have. Syntax error on line 281 of /etc/apache2/apache2.conf: Syntax error on line 1 of [URL].. closed. But I am sure there is a ?> at the end of this file.Base on what I read on [URL]...-with-the-tag/ I test without the ?> also, but I got the same error.
View 2 Replies View RelatedI wanted to setup my server as a router/gateway just for educational purposes and also when it succeeded i will keep the gateway and place it on the front line right after my modem.
My current setup as it is now :
The GATEWAY/ROUTER will be doing the main work to act as a dhcp server and firewall.
Now my setup as it is now :
So now what i ment to do was :
Let the clients connect to the gateway via ETH1 and all the stuff being router to ETH0 which is the NIC that is connected to the internet.
But now i have two huge problems :
1. The DHCP configuration seems to be fine the client machines get their ip adresses and /etc/resolve.conf looks fine to. But somehow the GATEWAY/ROUTER wont let me use the specified external DNs server so i cant do anything on these machines.
2. The firewall script [url] at line 27 should be DROP but if i use this line of code the GATEWAY/ROUTER cannot use his dns server settings so when i try to browse the internet or ping a machine outside my local network it would came up with nothing.
I have a openSUSE10.2(X86-64) Linux DHCP Server in my environment. It has a lot of VM's and Desktop systems which get added continuously. Also, it has a lots of Static-IP entries.Part-IIssue:The DHCP Server stopped leasing the IP's somehow.Workaround:1. Stopped the dhcpd service. (service dhcpd stop)2. Navigated to /var/lib/dhcp/db folder.3. Deleted the "dhcpd.leases" and "dhcpd.leases~" files.4. Recreated the "dhcpd.leases" file. (touch dhcpd.leases)5. Started the dhcpd service. (service dhcpd stop)
View 2 Replies View RelatedMy mother runs Ubuntu 10.04 on her home computer, but on her workplace they use some version of Windows. Her IT-guy sent her a .rdp-file for logging in to her workplace server. This file doesn't work in Ubuntu, and the IT-department at her job can't solve the problem. Ergo; She's unable to log on to her workplace computer/server from home.
View 3 Replies View RelatedI like the server login information that gets displayed when you login to a 10.04 server. It lists disk usage, CPU usage, Temperature etc...
Unfortunately I had problems installing 10.04 from a USB. At the end of the process the master boot record was stored on the USB and not the hard disk.
But now when I login to my server I don't get the server information.
I've set up a very simple net with a dhcp + dns server using dnsmasq. It works but the server itself cant resolv clients names. Clients do resolv without any problem my /etc/dnsmasq.conf
[Code]...
I want to set up a dhcp server such that the clients get same ip every time. Giving fixed address to every client would be a long process.
"I don't want to assign a specific ip to the client but what i want is the server provides same ip every time"
Just looking for the best/most reliable setup. In a nutshell, I would love to have a Domain Controller no DHCP File server. I want to leave the DHCP to the router. I need virtual to run a software off from it. Samba server and that is basically it. My questions are:
1. Can I have a Domain Controller without DHCP server?
2. Should I run virtual server headless? so I dont install any gui?
3. This should have been my 1st question. I have two disks, is raid handled by the Bios or do I have to do something in linux(DMRAID)?
I have worked with many if not all the things I have mentioned here, however, I have never done it from scratch.
I'm moving an office intranet server to a new machine running CentOS 5 with apache 2.2.3. Everything worked fine on my old CentOS server and nothing new or fancy being tried on the new machine: default server, no name virtual hosts etc.. However, on the new server I can only see the index.html page when I browse to it. Index.html is a frameset which calls other pages to load from subfolders to /var/www/html. The frameset loads but in each frame I see "The requested URL /hot_stuf/data_colm.html (etc.) was not found on this server.".
View 3 Replies View RelatedHow to given a range of IPs (like 1 to 200) through DHCP server?
View 7 Replies View RelatedI have server which has "Xen/debian" installed. On this there is a virtual machine which has "Debian" installed. This virtual machine is used as a dhcp server for the network. Since yesterday, its not leasing any ip address! when i connect its ethernet cable to switch it says "eth0: received packet with its own address as IP address". the only thing that i remember (which might have caused the problem) is adding a mirror server(a different machine). The dhcp server gave it the address 192.168.1.1(the network is 192.168.1.0/24) and it was working fine. anyone knows how to solve the problem?
View 3 Replies View RelatedIs it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedI recently setup an email server on Fedora Core (14). Sendmail is running and I am trying to authenticate from a client pc using imaps. I installed Cyrus-imap and it is running and listening on 993. When I try to login, it doesn't accept authentication even though I verified the user's password is correct. (tested with ssh)Is there something I have to do with Cyrus or on the server to allow connections to email? I have not used Cyrus before. I am attempting to access my mail folders via Sendmail and did not make mailboxes in Cyrus. I did allow imaps through the firewall.
View 1 Replies View RelatedI am facing login issues when i try to login as admin using phpldapadmin into ldap server. Installed phpldapadmin for administering ldap server from the repository:
1)[url]
2)yum install phpldapadmin
Able to see the default phpldapadmin login page.
ldapadmin throws the error as "Bad username/password.Please try again"
But when i login as anonymous i am able to login but the web page asks whether to create the root domain?
whether anything needs to be done for making it login as admin.
The details of my set up are as follows:
My slapd configuration:
ENV: openssh-server-5.4p1-1.fc13.i686 Problem: I am unable to ssh using Putty (when using ssh-auth/pki) to a fedora box . I get the message: Server refused our key. Here's what I tried so far:
- Tried generating rsa (as well as dsa) keys on the linux server and put the generated public key in the ~/.ssh/authorized_keys. Then I converted the private key using PuttyGen.
- Also, tried generating keys using PuttyGen and then converted the public key and placed it on the server
- Configured the sshd server (ssh_config) for using RSAAuthentication=yes. Tried all combinations and purmutations; however, I still get the "Server refused our key" error.