I have the desktop packages installed as well but the system is configured to go to the console on boot.I would like to make it run a script once the user has logged in...
View 4 RepliesI have an Ubuntu 9.10 server and i need to use an ftp server. I installed vsftp but i can't make it to work. What doesn't work is that can't login to the ftp server with my user(s).I created a user ("AddressBookUser") that should access to some files located on "/var/www/fpt/rubriche/". I set this folder as his home.Here is the row for this user in /etc/passwd:
Quote:
AddressBookUser:x:1001:1002::/var/www/ftp/rubriche:/bin/false
This user is member of the group "rubriche_ro" (and no other groups).This is my /etc/vsftp.conf:
Quote:
listen=YES
#listen_ipv6=YES
#
anonymous_enable=YES
[code]...
vsftpd.chroot_list exists, but as you see above the chroot_list_file directive is disabled.When i try to connect to the FTP server the connections is established but after i insert "AddressBookUser" as user name and confirm i get a "530 permission denied" message. This occurs both from the network (LAN) computers and locally:
Quote:
webs@webs:/etc$ ftp localhost
Connected to localhost.
220 Welcome to WEBS FTP service!
[code]...
I can't figure out what is the problem but my thought was that it's a problem related to the user configuration rather than vsftp configuration, but it's only my supposition. If i try to login with the "main" user of my Ubuntu server, "webs" i can login correctly.
When I'm trying to login to the ftp server with appropriate username and password its taking almost 10-15 seconds to authenticate making the login process slow, even when I'm uploading files its again hanging for 10-15 seconds before completing the job successfully.
Its not like its happening every time, but 7 times out of 10.
Any idea how can make the authentication fast?
I`am just trying to connect Samba with ldap to make it simpler for the users to log in. We have already attached squid, so by that we thought it would be easy to do the same with samba. I think we did something wrong with the ldap config for the os with is btw:
Quote:
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1
We added
Quote:
ldap admin dn = cn=xxx,o=xxx
[Code]...
I like the server login information that gets displayed when you login to a 10.04 server. It lists disk usage, CPU usage, Temperature etc...
Unfortunately I had problems installing 10.04 from a USB. At the end of the process the master boot record was stored on the USB and not the hard disk.
But now when I login to my server I don't get the server information.
After restart I cannot login to gnome, when I press ALT + CTRL + F1 it switch to text mode and I'm able to login with the same username and password.
Although when I enter the password on the gnome login it come a black screen for preparation to login but it go back to main login info, Bye the way I saved the username and password to auto login and I surprised after restart didn't login automatically.
I already created a test account adduser test but still not able to login whith the new one and the old.
I am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.
View 4 Replies View RelatedI have a web server running Ubuntu Maverick Server Edition. I changed the /etc/motd file to something custom (some awesome ASCII art). This changes the login for every single user on the entire system. My question is this: Is there a way to change that login file and make it different for each user or is that the only file and it can only be done system-wide.
View 1 Replies View RelatedMy login screen currently mirrors the image across both of my monitors, which are different sizes, causing one of the two images to be ugly and stretched. After logging in the monitors are configured correctly. Is there a way to either 1) disable one of the monitors during login, or 2) use both monitors without mirroring the image?
View 1 Replies View RelatedRunning this software:
Linux 2.6 on a hacked LaCie NetworkSpace
installed SSHd 5.4
installed Samba 3.4
installed lighttpd 1.4
installed ProFTPD 1.3
I want:
Login with my account and same password on all of those. When i use passwd, the change should be reflected on all of them.
I have:
Samba uses encrypted passwords, and i must change passwords for samba with smbpasswd.
lighttpd uses separate password file, must change by hand.
ProFTPD and SSH use system login (/etc/shadow).
So far i found two possible solutions, but can't tell if i understood them right or how to achieve them: use LDAP as auth backend If i could make LDAP my auth backend, provided this is possible at all, lighttpd would use this directly, and PAM would use it for system login. Nevertheless, actually this can't work as Samba uses encrypted passwords. Correct? use Samba password backend, then make LDAP use that If passwd, login, etc would use Samba, i would work everywhere with MD4 hashed stuff. Lighttpd would send plain passwords (HTTP basic auth), and query LDAP, which in turn makes an MD4 hash, and tests for Sambas passwd. Will this work?
Is it possible to bring KDM up after startup instead of tty1? Is yes, how?
View 3 Replies View RelatedUbuntu, and I sure know a little about Shell language. But now I need make my ubuntu boot into text mode directly and login automatically, without entering username/password by manual? I had make ubuntu boot into text mgrub fileRUB_CMDLINE_LINUX_DEFAULT="quiet splash text" , but I don't kown how to make system auto login. I'd like ubuntu login with administrator privilege then run some application automatically.
View 5 Replies View RelatedI am using ubuntu 10.04.I have seen animated ubuntu login screens.How can i get that kind of login screen.
View 1 Replies View Relatedhow to make suse prompt for a login when I first boot up. It never asks for my password and boots directly into kde.
View 4 Replies View RelatedEverytime i login my screen resolution is 640x480_60 Then i in a terminal change resolution to 1680x1050
Code:
cvt 1680 1050
xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
xrandr --addmode VGA-0 "1680x1050_60.00"
xrandr -s "1680x1050_60.00"
How can i make these settings default everytime i login?
i'm beginner in linux and don't know how to resolve my problem in knoppix i have installed knoppix version 6.2.1 in my system recently and when i turn on my computer , knoppix runs as compize fusion and don't show username and password screen to me . i searched alot in interent and found that that screen called GDM or KDM and i have them and when i run GDM in command i see the login screen in my system . but i don't know how to make it my default window when i turn on my computer .
View 2 Replies View Relatedi have dual boot win + ubuntu 11.04 when i make install burg-manager to change grub themes i lose the login screen to restore the login screen
View 14 Replies View RelatedI have 2 servers each one with a RAID and I want them mirror they data so if one of them goes down the other one take the job with out disruption. I've heard of multipath by I want to know it in detail or learn of more options.
View 2 Replies View RelatedI am trying to make an application server that would contain simple ones like edit, openoffice, gimp, so on and so forth. I know how to access these using ssh but what I want is that the application runs on that server as it already does, but to open local files and save them locally.
View 7 Replies View RelatedI want to make a transparent squid proxy server in centos. The squid proxy version is 2.6 stable. I made a normal squid server but want to make it transparent so that users do not need to enter the proxy settings in web browser. Even i searched about this on google but not getting it properly.I have two lan cards on centos system. ETH1 used for LAN and ETH2 used for WAN. And in this squid.conf i written "http_port 172.16.31.1:3128 transparent" and i also added a rule in iptables which is "iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128" but still i have to enter proxy settings at client's web browser to use internet
View 4 Replies View Relatedi just one to emulate the windows 2003 - windows XP easy VPN deployment, with my ubuntu server.I got my server side (ubuntu) and client side ( openVPN gui) and everything looks okbut now, i cant make a //server/SHARED and get from my house to the office's docs, despite the conection its ok... whats wrong?
View 14 Replies View RelatedIs it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedI recently setup an email server on Fedora Core (14). Sendmail is running and I am trying to authenticate from a client pc using imaps. I installed Cyrus-imap and it is running and listening on 993. When I try to login, it doesn't accept authentication even though I verified the user's password is correct. (tested with ssh)Is there something I have to do with Cyrus or on the server to allow connections to email? I have not used Cyrus before. I am attempting to access my mail folders via Sendmail and did not make mailboxes in Cyrus. I did allow imaps through the firewall.
View 1 Replies View RelatedI wanted to know how can I cross compile SMS SERVER TOOL for an embedded computer and make just one binary file for it or how can I change all of its default files places like its demon and object file and gather all of them to one directory to execute and use and run.let me explain it better for you : I have an embedded computer with Linux OS that its file system is read only and I can not add any file to /usr /lib and ..... and I can just mount a SD memory card to it and copy all of my programs to it and run them from there as you understand I have two choices to choose, first make one big binary file for each program that I am doing it now and it is not a suitable solution and the second is finding the way to change default place of shared object file of my program.now you tell me what can I do to solving this problem.
View 1 Replies View RelatedI am facing login issues when i try to login as admin using phpldapadmin into ldap server. Installed phpldapadmin for administering ldap server from the repository:
1)[url]
2)yum install phpldapadmin
Able to see the default phpldapadmin login page.
ldapadmin throws the error as "Bad username/password.Please try again"
But when i login as anonymous i am able to login but the web page asks whether to create the root domain?
whether anything needs to be done for making it login as admin.
The details of my set up are as follows:
My slapd configuration:
ENV: openssh-server-5.4p1-1.fc13.i686 Problem: I am unable to ssh using Putty (when using ssh-auth/pki) to a fedora box . I get the message: Server refused our key. Here's what I tried so far:
- Tried generating rsa (as well as dsa) keys on the linux server and put the generated public key in the ~/.ssh/authorized_keys. Then I converted the private key using PuttyGen.
- Also, tried generating keys using PuttyGen and then converted the public key and placed it on the server
- Configured the sshd server (ssh_config) for using RSAAuthentication=yes. Tried all combinations and purmutations; however, I still get the "Server refused our key" error.
it is possible to make a connection to a server with FTP Server from my vserver? like the IP shown ond the FTP server is the ip from my vserver? Is this like a Socks5? is it possible? and if i download something from this FTP-Server to my home (the vserver is "between"), how big is the Traffic? is all the Traffic, wich i download, throught my v-server? (because i just have a few GB per month to download)
View 3 Replies View RelatedI've been tried to be system admin, programmer, network admin, or network engineer. So, I've been studying this and that... what so ever struggling to find my talent. Back in 2007-2008, I was MS server admin/comm tech. I saw a building running MS server for user computers and Red Hat 9 as a main system server. MS sever was a just one of the user accounts of Linux server. When I log in to Linux, I could see log menu to access MS server. How could somebody make this creative thing?I'm now a Network engineer because working with CISCO router and switch is easier than working as programmer or server admin. I've studied Oracle 10 and VMWARE also but there are ceasless stuffs that I need to study... For now, in regards of my limited brain power, network engineer is proper for me.
View 1 Replies View RelatedIn a newly installed Linux machine which is a client machine, is not listening to NIS domain server even after setting IP address ,default gateway,and subnet mask.What are all the changes to be done in configuration file.And how can be solved
View 2 Replies View RelatedI setting up a web server on my Linux (Centos) using "Apache" web server. And its working well, it will show my websites. But when i try to put my url in a internet browser (ie. only type "myweb.com" ) is only be [URL]. Usually as i know like the other websites (ie. google.com) it will go to auto replace the name be [URL]. But my url here it's not be replacing like that. How to do this configuration. I don't know where the services that i need to look. (ie; named (bind) or in Apache web server it self)?
View 2 Replies View Related