Software :: Missing ISO 9660 Image Error Upgrading From USB
Jul 2, 2011
I have an Intel Core2 Duo system that is currently running the 32-bit version of Fedora 12. I want to upgrade the system to Fedora 14.I downloaded the DVD installation ISO for Fedora 14, and I used unetbootin on an 8 Gigabytes USB flash drive to created a bootable disk from the installation ISO.
When I boot off the USB drive, the installation process will run. I get to a screen concerning the boot loader. I use GRUB to dual boot the system between a Fedora and Windows 7.What is needed to resolve this issue so the installer can proceed properly and perform the upgrade?
View 2 Replies
ADVERTISEMENT
Jan 29, 2011
From last few days i stuck with error in installing CentOS 5.5 ISO using USB stick, I have customized ISO from cent os tree 5.5 and update.(customization with respect to the package removing like openoffice, X-window, Gnome ...)
Here are some details
anaconda : anaconda-11.1.2.209-1.el5.centos
kernel : kernel-2.6.18-194.26.1.el5
View 1 Replies
View Related
Sep 21, 2010
While I am installing Fedora-10 from my USB drive everything seems fine, except the bootloader. It's showing the message
"Missing ISO-9660 "
View 1 Replies
View Related
Nov 21, 2010
I tried compiling linux kernel 2.6.37-rc2 (mainline), Compilation and installation of kernel and modules went fine. After that while trying to make initrd image, I used the following command :-
mohitdhingras@mohitdhingras-laptop:~$ sudo mkinitramfs -o initrd.img-2.6.37-rc2 2.6.37-rc2
It is showing warnings like :-
W: Possible missing firmware /lib/firmware/2.6.37-rc2/radeon/RV610_me.bin for module radeon
W: Possible missing firmware /lib/firmware/2.6.37-rc2/radeon/RV610_pfp.bin for module radeon
W: Possible missing firmware /lib/firmware/2.6.37-rc2/radeon/R600_me.bin for module radeon
W: Possible missing firmware /lib/firmware/2.6.37-rc2/radeon/R600_pfp.bin for module radeon
Actually, "2.6.37-rc2" folder is missing in "firmware".
View 6 Replies
View Related
Jan 25, 2011
i have installed Ubuntu desktop 10.04.1 just few hours back, and now when i am updating my OS, i have notice that Ubuntu download linux-image-2.6.32-24-generic first (31.5MB) and then immediately after that it is downloading linux-image-2.6.32-27-generic (31.7MB). why it require two linux images? if linux 2.6.32-27 is latest one, then why linux 2.6.32-24 is downloaded, it could saved internet bandwidth and installation time.
View 1 Replies
View Related
May 1, 2010
How to edit a ISO 9660 file? I have one which I created using livecd-creator. Now I want to edit some of the files in it and save the changes. I have searched the guides and solutions for something and perhaps I overlooked it but I did not find anything.
View 5 Replies
View Related
May 1, 2011
I have lost the option to boot Microsoft vista after upgrading to ubuntu 10.04 and need help getting the vista boot option back so that I can use Vista once again. I'm not sure what version of ubuntu I was using previously, but I just followed a prompt in the previous version of ubuntu to update to 10.04. I can still access my documents in vista from ubuntu, which I assume means that I have not lost vista? After reading these forums I have done the following things: I have updated grub, but I don't think vista was detected. Results are pasted below:
[CODE]
ray@ray-laptop:~$ sudo update-grub
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
[code].....
View 4 Replies
View Related
Jun 22, 2011
I have a dvd that was made as a back up using ISO 9660 and windows reports that the disc isnt formatted and is empty but linux will report the it's an ISO and has 0mb free. access the files on this disc?
View 9 Replies
View Related
Apr 4, 2010
I installed 64-bit Fedora 12, and everything was working fine. I upgraded a bunch of packages (including, but not limited to, X and Gnome) via yum, and now I'm unable to access virtual consoles. X works fine, but Ctrl-Alt-F2, etc. leads me to a black screen.
How do I get my virtual consoles back?
View 13 Replies
View Related
Sep 3, 2010
Added the following line to sources.list:
deb [URL] squeeze main non-free
After that I did an update and upgrade.
The following packages were kept back : ffmpeg libavcodec52 libavdevice52 libavformat52 libcairo2 libpostproc51 libswscale0 mplayer ( libcairo2 is on hold ).
To overcome this I did: apt-get install mplayer
The following extra packages will be installed:
liba52-0.7.4 libartsc0 libbs2b0 libdirac-decoder0 libfaac0 libggi2 libggiwmh0 libgii1
libmp3lame0 libopencore-amrnb0 libopencore-amrwb0 libvdpau1 libx264-104 libxvidcore4
It ends like: Unpacking replacement mplayer ...
dpkg: error processing /var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb (--unpack):
trying to overwrite '/usr/share/pixmaps/mplayer.xpm', which is also in package mplayer-gui 2:1.0~rc3++final.dfsg1-1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Processing triggers for man-db ...
Processing triggers for menu ...
Errors were encountered while processing:
/var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Next thing I tried : apt-get dist-upgrade:
The following packages will be REMOVED:
libavfilter0
The following NEW packages will be installed:
libavcore0 libavfilter1 libavutil50 libva1
The following packages have been kept back:
libcairo2
The following packages will be upgraded:
ffmpeg libavcodec52 libavdevice52 libavformat52 libpostproc51 libswscale0 mplayer
Preparing to replace mplayer 2:1.0~rc3++final.dfsg1-1 (using .../mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb) ...
Unpacking replacement mplayer ...
dpkg: error processing /var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb (--unpack):
trying to overwrite '/usr/share/pixmaps/mplayer.xpm', which is also in package mplayer-gui 2:1.0~rc3++final.dfsg1-1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Processing triggers for menu ...
warning, in file '/var/lib/dpkg/updates/0006' near line 5 package 'libavcore0':
missing description
warning, in file '/var/lib/dpkg/updates/0006' near line 5 package 'libavcore0':
missing maintainer
warning, in file '/var/lib/dpkg/updates/0015' near line 5 package 'libavfilter1':
missing description
warning, in file '/var/lib/dpkg/updates/0015' near line 5 package 'libavfilter1':
missing maintainer
Errors were encountered while processing:
/var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 2 Replies
View Related
Jan 20, 2011
I've just finished an upgrade from debian lenny to squeeze.But when I tried to log into my Gnome session the menu and the taskbar was missing and when i click on change desktop preferences nothing happen and i m not able to run anny command as well (alt+f2). The upgrading process went good i think and i dont know what i did wrong
View 4 Replies
View Related
Oct 6, 2009
I just upgraded a F9 to F11 using the network install. After the successful install message, I rebooted to find the boot stuck on a grub prompt. After determining that somehow grub had not been installed properly, I used the rescue mode to re-install grub. When I then rebooted, I saw a blank (black) screen during the rhgb sequence, with just the multicolor progress bar moving from left to right. As the bar reached the right side, the standard F11 login screen appeared. The system is an old Omnibook 8000 laptop. Here is my grub.conf
Code:
# grub.conf generated by anaconda
Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00
# initrd /initrd-version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.30.8-64.fc11.i586)
root (hd0,0)
kernel /vmlinuz-2.6.30.8-64.fc11.i586 ro root=UUID=9b55f5fd-a5d3-4408-8db7-0c64b0f6a7fa rhgb quiet
initrd /initrd-2.6.30.8-64.fc11.i586.img
View 2 Replies
View Related
Sep 28, 2010
my hardware configure is 1gb ram,partition of hdd is c:25gb,d:80gb,e:80gb,windows xp 32 bit ,p4 2.70ghz processorI have download fedora 13 two times from the Internet. First ----Fedora-13-i686-live in winrar (675mb) when I extract winrar Fedora-13-i686-liveAfter Then in the new folder of Fedora-13-i686-live (675mb) some new file & folder are display.This file and folder are- (EFI , isolinux , liveos) Folder & files are GPL.Second --- using the bit torrent--- I have download Fedora-13-i386-DVD winrar (3.05GB) & a file Fedora-13-i386-DVD-CHECKSUM In the winrar to be extract there is a new Fedora-13-i386-DVD(3.07GB) folder is display. In this folder some file & folder are display.
the folder are (EFI,IMAGES,ISOLINUX,PACKAGES,REPODATA) & files are(.discinfo 1kb,.treeinfo 2kb,gpl 18kb,media.repo 1kb,RPM-GPG-KEY-fedora 0kb,RPM-GPG-KEY-fedora-13-primary 2kb,RPM-GPG-KEY-fedora-13-SPARC 4kb,RPM-GPG-KEY-fedora-i386 0kb,RPM-GPG-KEY-fedora-sparc 0kb,RPM-GPG-KEY-fedora-sparc64 0kb ,RPM-GPG-KEY-fedora-x86_64 0kb,TRANS.TBL 4kb)So my simple question is to you that where is the .exe of the fedora-13 or the fedora-i386-dvd.ISO image file in both the Internet download files
View 5 Replies
View Related
Dec 16, 2009
Sometimes my mouse image on the screen stops showing. The mouse itself does still work and I can highlight an icon and click it. Just the image is missing and it makes it difficult to know where you are.
View 1 Replies
View Related
Jan 19, 2010
I have two different ways to print to my HPOfficejet Pro 8500. They look like two different printers to the software.
When I attempt to print a PDF file one of these prints a mirror image; the other cuts approximately 1/2 inch from the top of the page.
OpenOffice.org files appear to print without problems.
I have openSUSE 11.2 and HPLIP 3.9.8
View 3 Replies
View Related
Dec 29, 2010
Okay, so bear with me for the lack of detail, its 3:46am and I'm really a beginner at this. So here is my issue: I decided I wanted to try Linux, so i got a Disc Image of Opensuse 11.3. while burning this disc image to a DVD-R I had no issues. But after the Validation was done an error appeared stating the disc Image was not burnt due to some error (apologies for not paying too close attention here) although the entire burn completed without issue. So I closed it and figured I would try again with another Disk when i get one.
Well as it turns out I did burn the Disc Image, and decided to try the Install. I have previously installed Ubuntu a few times and figured it was just as easy.. so I restarted my computer and booted from the CD. went through the Installation up to the Partition part.. This kind of confused me at first but I eventually got that it wanted to shrink my existing windows partition in order to make room. so i went along with it and began the install. well about halfway through the installation error messages kept showing telling me there were missing Packs. after about 10 messages I aborted the install for fear of what would happen now i have a shrunken partition and i dont know how to fix or what to do. I would still like to install opensuse but i dont have anymore DVD-R's and my Flash drive is too small. I will try to provide any info i can upon request. Oh, I forgot to mention im Running windows 7. if that helps at all which I doubt it does. I can safely access windows, nothing happened to the information on my drive. Im just missing 50GB of space now.
View 9 Replies
View Related
Nov 1, 2010
I have wordpress server running on my machine and I have SELinux enabled for enforcing/targeted. I am unable to insert images, music, etc from the add new post field on the wordpress dashboard. I receive the following error:
image.jpg has failed to upload due to an error The uploaded file could not be moved to /var/www/html/wordpress/wp-content/uploads/2010/10. When I disable SELinux completely, it works fine. Does anyone know what Boolean I need to check to resolve this issue?
View 4 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
May 7, 2010
I'm currently upgrading from ubuntu 9.10 to 10.04 (I installed my ubuntu using the windows ubuntu installer, wubi, a few months ago). I started the update manager to upgrade, and everything was going fine until it started installing the upgrades, more specifically when it got to "Preparing memtest86+", when it started continuously saying in the terminal "Found linux image: /boot/vmlinuz-2.6.32-22-generic". It's been stuck at "About 43 minutes remaining" for about half an hour. I've included a screenshot of my computer in the state it is in as I type this message.
View 2 Replies
View Related
May 2, 2010
I am trying to upgrade to 10.04 from 9.10 by mounting the ISO at /cdrom0 ,But I get this error during the "getting new packages" step
View 4 Replies
View Related
Aug 20, 2010
I want to upgrade my 32bit Fedora from 11 to 13 version. I tried both options: via preupgrade tool and via installation media (DVD). Both options failed with following Anaconda error at the beginning of installation process:
RpmUtilsError: RPM Error opening Package
In my case, the problem was in package:
/mnt/sysimage/var/cache/yum/anaconda-InstallationRepo-xxx.i386/packages/fontpackages-filesystem-1.44-1.fc13.noarch.rpm.
I switched to terminal, and discovered that size of this file is 0.
I downloaded installation DVD from official torrent, so checksum was autmatically checked. Verification test at the beginnig of installation was also successfully passed. So media is OK. Moreover, I also tried to upgrade via preupgrade tool with the same results.
I found similar bug with unclear status in Fedora Bug Tracking system for Anaconda in F12: [URL]
View 10 Replies
View Related
Apr 16, 2010
I need immediate assistance on the upgrade process off ubuntu server from version 9.04 to 9.10. Here is my output after running do-release-upgrade. I first ran the release upgrade from 8.10 to 9.04, which ran really smoothely without errors and at the end prompted a reboot. I have rebooted and decided to upgrade further - 9.04 to 9.10. And here is the result. I saw this long into the upgrade process, somewhere 1.5 hours into the upgrade: [URL]
View 1 Replies
View Related
Apr 29, 2011
Trying to upgrade a laptop from Ubuntu 10.10 to 11.04, and I get the following error...Note, that there are 3 "files" that come up with this message...
W: Failed to fetch [url] 404 Not Found
E: Some index files failed to download, they have been ignored, or old ones used instead.
And then drops out of the upgrade utility
View 2 Replies
View Related
Jan 1, 2010
Could someone look this over and give me the details on how i remove the package or program that did not recomplie correctly and doesnt behave right. Its called Novacom i was using it when testing some tethering with my palm pre, but as you can see in the terminal output below everytime i install a new package i get the same error about trying to recompile novacom. Im new to Linux but really liking not being on windows any more.
Unpacking kooldock (from .../kooldock_0.3-1ubuntu3_i386.deb) ...
Processing triggers for man-db ...
Setting up palm-novacom (0.3-svn177284-hud9) ...
stop: Unknown job: novacomd
[Code]...
View 4 Replies
View Related
May 3, 2010
Trying to load some apps like dosbox and virtualbox I get the following error:
Code:
View 3 Replies
View Related
May 18, 2010
after i've upgraded to 10.4 and after i've upgraded LTSP the system gives me the following error:
[code]....
Is there someone who knows what I should do?
View 2 Replies
View Related
Mar 3, 2011
I got an error Upgrades calculation is not possible An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
View 7 Replies
View Related
May 13, 2010
I issued "yum update" and the process ended with a transaction check error(see below).
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Check Error:
file /usr/share/backgrounds/images/default-5_4.jpg from install of oracle-logos-4.9.17-6.noarch conflicts with file from package desktop-backgrounds-basic-2.0-41.el5.centos.noarch
file /usr/share/backgrounds/images/default-dual-wide.jpg from install of oracle-logos-4.9.17-6.noarch conflicts with file from package desktop-backgrounds-basic-2.0-4
[code]...
I installed Oracle Database on this server few months ago. I see in /etc/yum.repos.d directory a public-yum-el5.repo file with entries pointing to Oracle which must have come from that installation. Now how do I proceed from here?
View 2 Replies
View Related
Dec 4, 2009
I'm currently running VB 3.0.10 on Fedora 12 64 bit.
When I attempt to upgrade my current install to 3.1 I get the following:
I am somewhat puzzled as this is a upgrade from a stable installed version. I have confirmed I have libcrypto.so.8 . . . from what I can tell its part of the openssl package but I've got the most current so I don't know how to obtain the libcrypto.so.10 file to correct this issue.
View 3 Replies
View Related
Jan 23, 2010
When upgrading from fedora 10 to fedora 12 (after reboot and during installation) I get the error message as - Error running transaction - you need more space on the following file systems : 23 M on /mnt/sysimage/boot
After this installation stops.
I checked /mnt , there is no folder as sysimage . Please suggest how to proceed further ?
View 2 Replies
View Related
