Software :: Installing LILO On USB External Hdd
Jul 6, 2009
I have not seen a clear cut or concise way to do this. I have copied my Linux system (Debian Lenny) from my internal hdd(hda) to a 160 GB external hdd(sda) hooked up through USB. I want to be able to boot from this external hdd. The system BIOS will allow ... supposedly ... booting from a USB device. I am using LILO with the internal and would rather continue using it. I don't know if it is installed correctly on the external. I seem to doubt it.Can anybody tell me where to look for more info? Or perhaps enlighten me on how to install LILO into the MBR of an external USB hdd.
Any other tips would be great as to how to boot my Linux system off of the external
View 4 Replies
ADVERTISEMENT
Mar 10, 2011
Im planning on installing a beta of my favorite distro to /dev/hdb from a mounted iso on an /dev/hda partition.Im not exactly a newbie, but i cant say i have ever done this before. Anyone aware of any issues i might encounter? Is lilo ok booting from one drive to another? Is it ok to just install lilo on the mbr of /dev/hda to boot a distro on /dev/hdb?
View 4 Replies
View Related
Mar 9, 2011
Basic Problem: I have been trying to install 13.1 (64-bit) and have not been able to get lilo to install.
Procedure:
1) partitioned drive /dev/sdc 1GB (Linux RAID) and 499GB (Linux Raid)
2) copied partitioning scheme to /dev/sdd
3) set up RAID-1 arrays md0 (sdc1-sdd1) and md1 (sdc2-sdd2)
4) write random data to partitions
5) set up LUKS on md1 (swluks)
6) set up LVM on swluks (80GB /, 375GB /home, 20GB swap)
7) ran setup, chose partitions, installed software
8) setup lilo (mbr, selected /)
9) TRIED to install lilo
[Code]..
View 4 Replies
View Related
Oct 30, 2010
I have to computers: 'A' (linux) and 'B' (windos). On 'A' I have a linux system that i copy over to a movable disk on which i install the lilo bootloader. Now when I move the disk to 'B' I am able to boot into the new linux system, however I would like to have an item in the lilo boot menu from which I can boot the windows system on 'B' also. And now the tricky part: I would like to create this item when the disk is still on 'A' where windows is not present.
I have tried using "disk = /dev/hda1 inaccessible" without any luck.Is it possible to "cheat" lilo into adding an item pointing to a disk that is not present on your system ?
View 2 Replies
View Related
Apr 15, 2010
I have one machine with two disks that I'd like to install Slackware on. I'd like to have the root folder and installed folders on hdb, and just have have hda as a disk I can use for storage (without any home directories, etc.). My problem is, I don't know how to make this boot, as I think LILO is installed on the primary drive, but the boot folder is located on hdb. I tried doing this before and was having problems booting, so I was just going to go through the whole process again, but don't really know the correct procedures.
View 2 Replies
View Related
Jul 20, 2009
I'm receiving the following error message when running LILO under SystemRescueCD after installing Slackware 12.2 (the slackware setup hung when installing LILO so I am trying to install manually - I have re-run setup, including formatting all drives again):FATAL: Trying to map files from unnamed device 0x0010 (NFS/Raid mirror down?)Let me know if any more information is necessary and thank you in advance for any help you can provide.
View 7 Replies
View Related
Oct 14, 2010
I work at a local computer shop as a computer technician and we get many computer in daily that require external virus scans (having to take out the hard drives, sticking it in another machine) just to scan (if we're lucky we can sometimes just do it in safe mode).Now what I want to know is...
1. Is it possible to install Ubuntu to an external HDD and use it virtually anywhere I plug it in? Will it pick up the network card, graphics card, etc so I can just plug and go? (Of course there are drivers for some computers).
2. Is it possible to run a Windows oriented virus scanner on Ubuntu? I know I can use WINE to run Windows applications, but will it prove to be compliant with virus scanners as well?
3. The main reason why I want it to be able to pick up on hardware and just work is because I plan on using it for schooling / travelling as well, have all my documents etc saved on it for easy access.
I've used Ubuntu in the past on an old laptop that didn't have much memory, small HDD, and a crap processor but that was 5-6 years ago (I still have the disk they sent me for free ).
View 3 Replies
View Related
Jun 19, 2009
I've just installed the new Fedora 11 (just released) through a Live CD having 3 partitions created:
"/boot" - ext3,
"/" - lvm (part 1)
swap - lvm (part 2)
now, I want to add my new Fedora system entry to my "central" lilo.conf, resident on another linux distribution. So, i've done
[Code]...
my lilo fedora entry boots fine but... at the middle of "after boot" loading the system hangs and stops the usual driver detection, etc (normally, it hangs on the CDROM detection or USB 2.0 camera detection).
View 10 Replies
View Related
Oct 16, 2010
I'm fairly new to linux, and a few days ago, as I was updating my system, I got the "EBDA is big ; kernel setup stack overlaps LILO second stage" error after reboot. I use a 3- boot, ( Win XP / Debian / Debian) and Windows XP works fine, but I can't launch any of the Debian. I googled the message, and I found this link :
[URL]
The only problem problem is that when I try to chroot, I got another message, "chroot: failed to run command `/bin/bash': No such file or directory" I googled this message too, but found no relevant answers. I am now using a knoppix usb drive to try to repair the lilo, but I ran out of ideas ...
View 4 Replies
View Related
Mar 2, 2010
After installing ubuntu 9.10 on external HDD I cannot boot vista if external usb is unplugged(where ubuntu is installed). it says grub loading and after that recover grub ( i think that is what is says ... not certain in this moment ) anyway hope you get my dilemma. If you need more information I'll be glad to provide it.
View 9 Replies
View Related
Aug 11, 2010
I have 4 servers with RedHat Enterprise server 32-bit installed. i'm trying to install 64-bit system instead but the hardware has only CD drive (not DVD). When i tried to use external DVD drive and connect it to the USB to install the 64-bit system, it starts ok but then it ask for the media and give me 4 options (Internal CDROM, Internal Harddrive, FTP, NFS). Now i'm stuck with the DVD that system can't read it and i don't have RedHat on CDs and i'm unable to install the 64-bit system.
View 6 Replies
View Related
Nov 3, 2010
anyone done an install of a 3 external USB modem? For a Dell pentium 4 laptop. Using Gnome.
View 3 Replies
View Related
Feb 13, 2011
I installed Ubuntu 10.10 to an external HDD. The install went off without any problems or errors and the external HDD boots no problem on many different computers. Ubuntu runs great except for one problem. After I put the computer into sleep/standby mode it doesn't come out of standby mode properly. On some machines I get a black screen and a cursor on others I get some error messages. I then have to force a shut down and reboot. There is no problem going into standby or doing a regular shut down.
View 4 Replies
View Related
Mar 8, 2011
Same as before except now not even the speaker control in the application barBackground:I have Ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination.Went to terminal and ran alsamixer which seems to recognize my sound card, though the driver is not listed in System > Administration > Hardware Drivers; the only driver listed is my graphics card.Setup: I have a Dell 8250. Speakers are plugged into the SB live card. Woofer and 2 speakers using transformer.
View 1 Replies
View Related
Feb 2, 2010
I just bought WD External Hard drive for my laptop and found out that there is no support for Linux. I am running Ubuntu 9.10 and need advice on installation.
View 9 Replies
View Related
Jun 8, 2010
I am trying to install 10.04 to an external HD (not flash). I ran the live CD, installed to it and all seemed to work fine, but I don't want to use GRUB. I ran 7 repair and did a bootrec /fixmbr and it's booting normal, but I can't boot to USB.I want it to boot normal, unless I hit F12 to boot to removable device. Not much of a Linux person, but I am trying to be.
View 7 Replies
View Related
Jul 13, 2010
I'm trying to install Ubuntu 10.04 PPC on to an Western Digital External USB 1TB drive to run on a:
eMac G4
1ghz
1GB RAM
I would like to only use like 40GB of the 1TB External. I get to the part where I can Manual edit partition tables and am lost on how to do this.
View 8 Replies
View Related
Apr 15, 2011
Is there a way to install 11.04 on a external USB drive. I tried the regular install but it will not let me pick the drive, it wants to install on my internal HD. I know I can use Startup disk Creator but It set it up like a install USB and it takes forever to boot up. Also if I use Unetbootin I won't be able to save files to the USB Drive.
View 1 Replies
View Related
Mar 5, 2011
I have issues in installing HP Ultrium 448 external tape drive on HP ML 370 G5 server running Red-Hat-Linx OS. It has a SCSI interface & I thought it was suppose to plug & play but not. I got an information that all i need to do is echo "engage scsi" > /proc/drivers/cciss/cciss1 but unfornately i do not know how to do this because i just began learning about LINUX,
View 1 Replies
View Related
Mar 4, 2010
I am trying to install an external serial modem on my Fedora 12 8it 64 bit system. The modem works ok on a windows machine using the standard drivers.
To attempt to install I selected;
System>Administration>network
Entered the administrator password
[code]....
When I went back a tried to install the model the following error message was shown.
component: system-config-network
Version: 1.5.99
Summary: TBf1b4415d NCPluginDevModem.py:37:getModemList:ImportError: No module named kudzu
[code]....
View 1 Replies
View Related
Feb 20, 2010
I looked around on these forums and google and came to no solution so, I decided to make this thread. I'm using Windows XP and after I downloaded and tested out Ubuntu 9.10, I decided I'd like it as a second OS, can I install Ubuntu on my external hard drive (1TB)? would installing on an external hard drive take away the risks of losing data etc? If I installed Ubuntu on my external hard drive would it delete any files already on my hard drive?
View 9 Replies
View Related
Apr 19, 2011
I tried to do this and something went wrong, and caused so much trouble that I decided I didn't want to do it at all. Then I changed my mind today, and decided I'll try again even after all that happened.
View 4 Replies
View Related
Jul 26, 2011
I have a iBook G3 that dosnt want to boot up at all. It makes the ding then a grey screen pops up. How do I install Ubuntu onto my iBook G3 with a external USB harddrive? is there a way?
View 4 Replies
View Related
Aug 9, 2010
I have a DWA-130C (external wireless) and am trying to install the drivers for us in Linux Mint, I'm assuming this is done with ndiswrapper, but I have no idea what I'm doing. I am a begginer to Linux though I know the basics of using the console, packages and such.
View 2 Replies
View Related
Apr 9, 2009
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
View 3 Replies
View Related
Mar 6, 2010
I'm trying to install an external graphics adapter for dual-monitor setup, and according to the installation instructions, the driver is libdlo, which requires libusb v0.13. When I follow the installation instructions, I got an error saying I don't have libusb on my OpenSUSE 11.2. The exact installation instructions is as follows:
Prerequisites:
* Install a compatible libusb version (0.13)
* on ubuntu - "sudo apt-get install libusb"
* Plug in a compatible DisplayLink USB device
To start the build process, open a shell prompt (as the user who's home directory the libdlo is installed into) and change to the libdlo directory to run
$ ./configure
$ sudo make install
$ make check
Make check will do some basic drawing on the DisplayLink device. The 'sudo make install' step will have installed libdlo.h, the main header, in your local include directory, and libdlo in your local library.(The error message comes out at $ sudo make install).
I noticed it mentioned Ubuntu, does this mean that it will only work in Ubuntu and wont work in OpenSUSE? I'm not familiar with those commands in the instructions above, I can only guess them but don't really know what each line of the instruction does exactly. If libusb also applies to OpenSUSE, how can I get it installed on my system?
View 2 Replies
View Related
Jul 15, 2010
The default (graphical) installer did not work on my PC (i7 quadcore 8 GB DDR3). I have installed Ubuntu using the alternative installer (Desktop, 64 bit) on my external USB drive. I installed grub on the MBR of the second drive (/dev/sdb) as I did not want to touch my (first) Windows disk. After reboot (chosing the USB drive as boot device, else Windows is booted) grub reports an error and enters the rescue mode. I tried all possible combinations of "root=(hdX,Y)" in grub.cfg to no avail.
I repeated the whole procedure but now disconnected the internal HD with Windows. Installation went smooth again (Windows disk was not seen this time), but after reboot (the internal drive connected or not) I again get (slightly different this time) grub error: can not find file.
View 9 Replies
View Related
Sep 19, 2010
I have a laptop with a busted screen and no way to boot directly to the external monitor with ubuntu installed and the thing is I want to install windows 7. Anybody know of anyway to do this without being able to see the screen before the os loads? So far I have messed around with installing windows 7 in vm box and trying to turn the vdi file into a valid partition and also tried installing it with wine but it couldn't find the temp folder to copy the install files.
View 5 Replies
View Related
Mar 31, 2011
I am having trouble with setting up the grub based system on my external hdd. I am trying to have one grub which is going to load operating systems, and livecd if any (usb install). I am stuck at installing Ubuntu 10.10 Minimal version (i don't need gui for linux).Here is what I have done so far:
1. Created 2 primary partitions - windows 7 recovery and data (ntfs)
2. Created an extended partition for linux stuff.
3. Create a logic partition (10MB) for grub (ext2)
[code]....
View 6 Replies
View Related
Jun 1, 2011
Instructional post - medium difficulty. Installing on an older notebook (or other system) with no external bootable device available:No CD/DVD drive
No floppy
No boot to USB capability
No (usable) OS on HD
Solution went like this:Remove target HD from notebook.*
Disconnect HD from a desktop.**
[Code]...
View 2 Replies
View Related
