I have 4 servers with RedHat Enterprise server 32-bit installed. i'm trying to install 64-bit system instead but the hardware has only CD drive (not DVD). When i tried to use external DVD drive and connect it to the USB to install the 64-bit system, it starts ok but then it ask for the media and give me 4 options (Internal CDROM, Internal Harddrive, FTP, NFS). Now i'm stuck with the DVD that system can't read it and i don't have RedHat on CDs and i'm unable to install the 64-bit system.
I am having trouble with setting up the grub based system on my external hdd. I am trying to have one grub which is going to load operating systems, and livecd if any (usb install). I am stuck at installing Ubuntu 10.10 Minimal version (i don't need gui for linux).Here is what I have done so far:
1. Created 2 primary partitions - windows 7 recovery and data (ntfs) 2. Created an extended partition for linux stuff. 3. Create a logic partition (10MB) for grub (ext2)
I work at a local computer shop as a computer technician and we get many computer in daily that require external virus scans (having to take out the hard drives, sticking it in another machine) just to scan (if we're lucky we can sometimes just do it in safe mode).Now what I want to know is...
1. Is it possible to install Ubuntu to an external HDD and use it virtually anywhere I plug it in? Will it pick up the network card, graphics card, etc so I can just plug and go? (Of course there are drivers for some computers).
2. Is it possible to run a Windows oriented virus scanner on Ubuntu? I know I can use WINE to run Windows applications, but will it prove to be compliant with virus scanners as well?
3. The main reason why I want it to be able to pick up on hardware and just work is because I plan on using it for schooling / travelling as well, have all my documents etc saved on it for easy access.
I've used Ubuntu in the past on an old laptop that didn't have much memory, small HDD, and a crap processor but that was 5-6 years ago (I still have the disk they sent me for free ).
so here's my issue and what I think is causing it right now. I have a 1TB external usb hard drive that has worked perfectly, but recently I set it up a mount point for it in fstab so that I could create a SMB share on the drive so I could stream videos and pictures to my TV through my Wii using WiiMC. This now works perfectly, but now the hard drive has been set into read-only mode. When I use sudo to try to chmod the drive or the folders on it, it does nothing. When I right-click on the drive and check the permissions tab, it says the owner is root and all the options are greyed out.
I've read through several posts on similar topics to this, but none of them have been very helpful as they suggest using command line tools that I don't know how to use, so I'm hoping someone here can give me concise, step by step instructions of what to type in, or what settings to change in fstab to solve my little problem so I can start copying stuff back onto my drive. I'm running Ubuntu 10.10 and the filesystem on the external drive is FAT32. Here's some more info you might need:
I started installing fedora 15 from CD on a dell Vista Laptop (2hz 1g ram) but after the logo finished turning white it stays on the blue screen with the bird.I have been trying fedora 13 and xubuntu on this cheap old con of a laptop from pc world and things run smooth (E-system 1.7hz 512RAM vista
Im using Linux Mint Helena and just got myself a new HP Deskjet D1663 printer. However, I followed the instructions on [url] but am getting stuck at Step 5A.
When I put the command.
Quote:
make
It gives the error
Quote:
make: *** No targets specified and no makefile found. Stop.
I'm also surprised that the [url] website had no option for Linux Mint 8 (Helena) and thus i had to follow instructions and do installations as per Linux Mint 5 or 6. I hope the Step 2 (Install Dependency Packages) has not adversely affected my Linux 8.
After installing ubuntu 9.10 on external HDD I cannot boot vista if external usb is unplugged(where ubuntu is installed). it says grub loading and after that recover grub ( i think that is what is says ... not certain in this moment ) anyway hope you get my dilemma. If you need more information I'll be glad to provide it.
I'm trying to install Sid in Virtualbox using debian-testing-amd64-businesscard.iso : Expert install, Sid mirror, Standard system utilities....So far, so good. After that I want to install a minimum gnome, but this time ( I've done it before with success ) I got stuck :
I've tried to install opensuse in a dual boot with xp. I've got an extended partition with root home and swap and primary partitions for xp and boot. The installation freezes at 92% while installing the bootloader, I've tried installing from cd and from usb, with or without boot partition and nothing changed.
I am trying to install Ubuntu 10.04 from a USB drive but every time I reach the option for changing the keyboard layout and press forward, it seems to get stuck. That is, the mouse icon shows that it is loading but nothing ever happening. I even went for a shower, came back and nothing.
My smallest disc has the Vista loader and nothing else but I cannot select it for Dual Booting in the Ubuntu installation set up only for use as an entire disc which would delete the Vista Loader.
This is what I have:- 1st disc - no operating system much data 2nd Disc - empty except for Windows loader 3rd Disc - no operating system much stuff.
My original plan was to give Ubuntu all of the smaller second disc and I deleted everything ready to give it the entire hard disc. It was only when I went to install Ubuntu it I found the Vista loader lurking on disc 2 and the only option the install Ubuntu set up gave me for disc 2 was to use the entire disc (wiping out Vista loader) otherwise I could have installed Ubunbtu on another disc - which it reported as having no operating system.
If I put Ubuntu on disc 1 would I have a dual boot arrangement given that the installer saw no operating system on that disc ? Is there any (simple) way I can install Ubuntu on disc 2 and not loose the Vista loader? I am installing this version of Ubuntu as it was on the DVD that came with book "Beginning Ubntu Linux" It took me long time to Psych myself up to install it and when I did . . .
I'm trying to install supercollider following this guide: [url]
And I'm completely stuck on installing Planet CCRMA at Home. The guide says update your computer with PackageKit, KPackageKit. I believe I have both installed but cannot see them in the applications menu. Where can check?
Next the guide says: Run the following command in a terminal window: su -c 'rpm -Uvh
I downloaded ubuntu 11.04 and did the usual shizz and it was all going well. I went to get a drink and by the time i got back my computer had completely crashed. I cant move the mouse or anything and it is stuck on 'Installing System'.
Ive restarted my computer (unplug), i had to format the harddrive i was installing it on (luckily it was empty already).
I just installed ubuntu on my m11x and am completely new to ubuntu. After installing the latest driver for the 335m I am stuck at checking battery state and there is no way I can get to the gui anymore. The only access I have to are the tty's and I don't know what to do. I have already tried finding a solution for a couple of hours, but cannot find any. Please help me solve this problem, I do not want to reinstall again.
After untarring the file and executing the binary for firefox, the following error is coming "brilliant:/firefox # ./firefox ./firefox-bin: error while loading shared libraries: libpangocairo-1.0.so.0: cannot open shared object file: No such file or directory". The libpangocairo-1.0.so.0 is there in /usr/lib.. I guess this is because the SuSE is 64 bit and the software Im trying to install is 32 bit.
I installed Ubuntu 10.10 to an external HDD. The install went off without any problems or errors and the external HDD boots no problem on many different computers. Ubuntu runs great except for one problem. After I put the computer into sleep/standby mode it doesn't come out of standby mode properly. On some machines I get a black screen and a cursor on others I get some error messages. I then have to force a shut down and reboot. There is no problem going into standby or doing a regular shut down.
I have not seen a clear cut or concise way to do this. I have copied my Linux system (Debian Lenny) from my internal hdd(hda) to a 160 GB external hdd(sda) hooked up through USB. I want to be able to boot from this external hdd. The system BIOS will allow ... supposedly ... booting from a USB device. I am using LILO with the internal and would rather continue using it. I don't know if it is installed correctly on the external. I seem to doubt it.Can anybody tell me where to look for more info? Or perhaps enlighten me on how to install LILO into the MBR of an external USB hdd.
Any other tips would be great as to how to boot my Linux system off of the external
I am trying to install ubuntu on my dekstop computer, i put in the cd it boots, i choose language, and when i get the menu where i can start ubuntu from cd, install it etc. Whatever option i press enter at, i am stuck at a black screen with a flashing white _ in left top corner.I am using an external usb dvd drive.i tried the same usb dvd drive at my laptop and the white _ was there for just some seconds and then ubuntu started doing what it should.
I am new to Linux and I am trying to install puppy on an old IBM thinkpad 600X (10gb hd, 196mb ram) When installing puppy from a cd, it loads up and does the kernel stuff before "Searching for Puppy files in computer disk drives" - this takes about 10 minutes before saying "pup_421.sfs not found. Dropping out to initial ramdisk console" then it goes to "/bin/sh can't access tty; jon control turned off". then it stays like that and doesn't continue.
Same as before except now not even the speaker control in the application barBackground:I have Ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination.Went to terminal and ran alsamixer which seems to recognize my sound card, though the driver is not listed in System > Administration > Hardware Drivers; the only driver listed is my graphics card.Setup: I have a Dell 8250. Speakers are plugged into the SB live card. Woofer and 2 speakers using transformer.
I just bought WD External Hard drive for my laptop and found out that there is no support for Linux. I am running Ubuntu 9.10 and need advice on installation.
I am trying to install 10.04 to an external HD (not flash). I ran the live CD, installed to it and all seemed to work fine, but I don't want to use GRUB. I ran 7 repair and did a bootrec /fixmbr and it's booting normal, but I can't boot to USB.I want it to boot normal, unless I hit F12 to boot to removable device. Not much of a Linux person, but I am trying to be.
Is there a way to install 11.04 on a external USB drive. I tried the regular install but it will not let me pick the drive, it wants to install on my internal HD. I know I can use Startup disk Creator but It set it up like a install USB and it takes forever to boot up. Also if I use Unetbootin I won't be able to save files to the USB Drive.
I have issues in installing HP Ultrium 448 external tape drive on HP ML 370 G5 server running Red-Hat-Linx OS. It has a SCSI interface & I thought it was suppose to plug & play but not. I got an information that all i need to do is echo "engage scsi" > /proc/drivers/cciss/cciss1 but unfornately i do not know how to do this because i just began learning about LINUX,
I looked around on these forums and google and came to no solution so, I decided to make this thread. I'm using Windows XP and after I downloaded and tested out Ubuntu 9.10, I decided I'd like it as a second OS, can I install Ubuntu on my external hard drive (1TB)? would installing on an external hard drive take away the risks of losing data etc? If I installed Ubuntu on my external hard drive would it delete any files already on my hard drive?
I tried to do this and something went wrong, and caused so much trouble that I decided I didn't want to do it at all. Then I changed my mind today, and decided I'll try again even after all that happened.
