General :: Still No External Sound After Installing Ubuntu 10.04?
Mar 8, 2011
Same as before except now not even the speaker control in the application barBackground:I have Ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination.Went to terminal and ran alsamixer which seems to recognize my sound card, though the driver is not listed in System > Administration > Hardware Drivers; the only driver listed is my graphics card.Setup: I have a Dell 8250. Speakers are plugged into the SB live card. Woofer and 2 speakers using transformer.
View 1 Replies
ADVERTISEMENT
Oct 14, 2010
I work at a local computer shop as a computer technician and we get many computer in daily that require external virus scans (having to take out the hard drives, sticking it in another machine) just to scan (if we're lucky we can sometimes just do it in safe mode).Now what I want to know is...
1. Is it possible to install Ubuntu to an external HDD and use it virtually anywhere I plug it in? Will it pick up the network card, graphics card, etc so I can just plug and go? (Of course there are drivers for some computers).
2. Is it possible to run a Windows oriented virus scanner on Ubuntu? I know I can use WINE to run Windows applications, but will it prove to be compliant with virus scanners as well?
3. The main reason why I want it to be able to pick up on hardware and just work is because I plan on using it for schooling / travelling as well, have all my documents etc saved on it for easy access.
I've used Ubuntu in the past on an old laptop that didn't have much memory, small HDD, and a crap processor but that was 5-6 years ago (I still have the disk they sent me for free ).
View 3 Replies
View Related
Feb 13, 2011
I installed Ubuntu 10.10 to an external HDD. The install went off without any problems or errors and the external HDD boots no problem on many different computers. Ubuntu runs great except for one problem. After I put the computer into sleep/standby mode it doesn't come out of standby mode properly. On some machines I get a black screen and a cursor on others I get some error messages. I then have to force a shut down and reboot. There is no problem going into standby or doing a regular shut down.
View 4 Replies
View Related
Feb 3, 2011
I am keen to start using Ubuntu and have installed it on one of 4 partitions on my new 1 TB external HD. I got to the reboot stage where I was expecting a new boot screen where I could decide to use either XP or Ubuntu. But there is no mention of Ubuntu just XP and the volume I installed Ubuntu on has disappeared. I can find the other 3 volumes on My Computer.
View 3 Replies
View Related
Aug 9, 2010
I have a DWA-130C (external wireless) and am trying to install the drivers for us in Linux Mint, I'm assuming this is done with ndiswrapper, but I have no idea what I'm doing. I am a begginer to Linux though I know the basics of using the console, packages and such.
View 2 Replies
View Related
Apr 23, 2011
I've got Vista installed on my notebook and I've bought an external drive (1,5 TB, but its size shouldn't matter in this case) and after formatting it I left 10 gigs for future purpose. Now, I decided to install 64bit debian on the unallocated 10 gigs. And so I did. To be precise: I have SATA drive inside my lap and hard drive (it's also SATA inside the cover) connected to my lap through USB. Boot sequence was 1)CD/DVD 2)hard drive 3)removable drive. During the installation the installer detected my internal drive as /dev/sda and my external drive as /dev/sdb. I decided to install grub on /dev/sdb (it was logical to me, since I didn't want to mess up my regular drive's MBR). Installer created 5 partitions on my USB drive. After booting from my external drive (look below*) I've got a message saying
Code:
error: no such partition Entering rescue mode... and after that I was in grub rescue console. When I typed ls I've got an output
Code:
(hd0) (hd0,msdos1) (hd1) (hd1,msdos5) (hd1,msdos2) (hd1,msdos1)
When I tried to type
Code:
ls (hd0)/
I only got a message
Code:
error: unknown filesystem This occured for all the listed devices... On my internal drive there were (during the installation and running the live cd) 3 partitions detected (vista os, data, rescue disk) so I don't understand the output that ls in rescue console gave me. about booting from external drive: I did that after pressing ESC - I've got a prompt to choose which device I want to boot from - this wasn't working properly; after changing the boot sequence the grub started but with the abovementioned error message...
If there's any info about exact names/types/devices of my installed partitions needed I will run live CD and check it. If any other info is required I will provide it (I tried to describe the problem in the most precise way ) What I was thinking about: maybe there is a problem with ordering of the devices - when I boot from DVD my removable disk is treated as the "second one" and after booting from the removable disk it becames the "first one" or something like that? If any of you have any good info on how mapping of the device names works it would be appreciated, since I couldn't find anything useful or I just don't know what to ask google about.
1) How to install Debian on a removable disk (I had no problems with installing Linux on pendrive but I did that from VirtualBox and it was some time ago) OR how to install GRUB on a removable disk? (unfortunately, I cannot install 64bit system through VirtualBox)
2) What's the logic behind naming devices under /dev? How come the devices in grub have their names mapped as hdx etc and I've read that hdx are the names for IDE/ATA drives and sdx is the proper name for a SATA or USB device
View 3 Replies
View Related
May 10, 2011
I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
View 2 Replies
View Related
Aug 20, 2010
I am new to fedora 13. My problem is that I can not hear any sound from my laptop's internal speakers (that works f9 in windows--so no h/w probs!) but when I connect external headphones, everything is heard.I have tried several commands from various internet sources since past one week. I don't understand many of the commands that I have run, but that has somehow helped me to run media files and hear sound on HEADPHONES.
View 8 Replies
View Related
Mar 2, 2010
After installing ubuntu 9.10 on external HDD I cannot boot vista if external usb is unplugged(where ubuntu is installed). it says grub loading and after that recover grub ( i think that is what is says ... not certain in this moment ) anyway hope you get my dilemma. If you need more information I'll be glad to provide it.
View 9 Replies
View Related
Jul 25, 2010
My friend recently installed fedora 12 in his system. Intel core2 duo, 2 GB ram. It didnt play mp3 files, but the sound during login, logout etc were ok. I searched some sites and told him to do
Quote:
yum update @sound-and-video
(This worked for me)
but now in his system the player (amarok) shows the sound is playing but cant hear anything also the login and logout sounds also not playing.
View 6 Replies
View Related
Jan 17, 2011
i buy a laptop and install fedora 11 in it but no sound after installing fedora 11 in my laptop (hp dv3655).
View 5 Replies
View Related
Feb 6, 2011
I have installed vlc player on my system using wine. In the task bar, the volume control is working fine and songs also get played in the vlc player.But i am not getting any voice in my headphones.
Following i am giving the results of few commands, which can help you people in giving me the best decision
lspci
OUTPUT
lsmod | grep snd
output
View 1 Replies
View Related
Jan 4, 2010
Ubuntu 9.10 Karmic Koala kernel: 2.6.31-16-generic Toshiba A205-S5800 Background: With an earlier version of Ubuntu (think it was 7.04) I had the problem of no sound on the external speaker, only earphones. With a later update the external speakers worked but without much volume. With 9.10 everthing worked but the external volume was still low. About a week ago there was an update. After load the speakers were loud and clear and neither had a hiss or hickup. Then yet another update comes yesterday and I now have a severe HISSssss on my earphones and no external speakers again. After reading some blogs I checked the front setting and found [MM] there - was hopeful - but after hitting "M" and changing to "00" and adjusting the level still the same problem with or with out a reboot. I'm stumped. I don't know that to install or
[Code]...
View 1 Replies
View Related
Apr 24, 2011
I've got an old Philips 5.1 surround sound system and I'm just wondering how to set it up.Everything's hooked up properly (I think) but it's journeyed to no avail. I'm actually wondering if it's possible. I haven't got a surround sound card. I simply have a twin audio RCA to stereo cable plugged into the sound card.I've set the hardware in sound preferences to Analog 5.1 Surround. Here's the contents of my /pulse/daemon.config
Code:
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
[code].....
View 1 Replies
View Related
Aug 31, 2010
I don't have any sound in my external device (TV). I'm attempting to watch a movie on the VLC player but I can't seem to get the sound to work through my television speakers! They are coming out of my computer speakers just fine though.
View 5 Replies
View Related
Apr 17, 2010
I have an external USB Sound Card (Audiophile Fubar II DAC) that worked flawlessy up to one or two months ago when suddenly it stopped to make any sound. The card, speakers, etc. are working, I tried it from another OS running on the very same PC. The card is detected, but it's dumb
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
[code]....
The card appears under System->Preferences->Sound->Hardware but there are two unusual things (if I remember correctly). 1. The green sound card icon on the left is not shown, it's not gray, there is nothing (but the USB Headset, that works well, doesn't have the icon either so maybe it'ok).
2. From the Profiles dropdown I can only choose from four options (off, analog mono, analog stereo and digital duplex). Before there were more (digital output only, etc.).I checked the levels several times. Another external USB card (SB Xi-Fi 5.1) works well.
View 2 Replies
View Related
Feb 2, 2010
I just bought WD External Hard drive for my laptop and found out that there is no support for Linux. I am running Ubuntu 9.10 and need advice on installation.
View 9 Replies
View Related
Jun 8, 2010
I am trying to install 10.04 to an external HD (not flash). I ran the live CD, installed to it and all seemed to work fine, but I don't want to use GRUB. I ran 7 repair and did a bootrec /fixmbr and it's booting normal, but I can't boot to USB.I want it to boot normal, unless I hit F12 to boot to removable device. Not much of a Linux person, but I am trying to be.
View 7 Replies
View Related
Jul 13, 2010
I'm trying to install Ubuntu 10.04 PPC on to an Western Digital External USB 1TB drive to run on a:
eMac G4
1ghz
1GB RAM
I would like to only use like 40GB of the 1TB External. I get to the part where I can Manual edit partition tables and am lost on how to do this.
View 8 Replies
View Related
Apr 15, 2011
Is there a way to install 11.04 on a external USB drive. I tried the regular install but it will not let me pick the drive, it wants to install on my internal HD. I know I can use Startup disk Creator but It set it up like a install USB and it takes forever to boot up. Also if I use Unetbootin I won't be able to save files to the USB Drive.
View 1 Replies
View Related
Aug 11, 2010
I have 4 servers with RedHat Enterprise server 32-bit installed. i'm trying to install 64-bit system instead but the hardware has only CD drive (not DVD). When i tried to use external DVD drive and connect it to the USB to install the 64-bit system, it starts ok but then it ask for the media and give me 4 options (Internal CDROM, Internal Harddrive, FTP, NFS). Now i'm stuck with the DVD that system can't read it and i don't have RedHat on CDs and i'm unable to install the 64-bit system.
View 6 Replies
View Related
Jun 1, 2010
I looked around the settings on Ubuntu and I cannot prevent sound from being played on my laptop speakers when external (more powerful) speakers are plugged in. Windows automatically defers all sound output to the external ones as soon as it is plugged in.
View 6 Replies
View Related
Dec 16, 2010
I have an external sound blaster x-fi sound card for my laptop, however the software/drivers don't seem to be supported for Linux. Is there anything I can do to get this to work? I also have wireless speakers that connect to it so it would be a shame to not get them to work.
View 1 Replies
View Related
Feb 20, 2010
I looked around on these forums and google and came to no solution so, I decided to make this thread. I'm using Windows XP and after I downloaded and tested out Ubuntu 9.10, I decided I'd like it as a second OS, can I install Ubuntu on my external hard drive (1TB)? would installing on an external hard drive take away the risks of losing data etc? If I installed Ubuntu on my external hard drive would it delete any files already on my hard drive?
View 9 Replies
View Related
Apr 19, 2011
I tried to do this and something went wrong, and caused so much trouble that I decided I didn't want to do it at all. Then I changed my mind today, and decided I'll try again even after all that happened.
View 4 Replies
View Related
Jul 26, 2011
I have a iBook G3 that dosnt want to boot up at all. It makes the ding then a grey screen pops up. How do I install Ubuntu onto my iBook G3 with a external USB harddrive? is there a way?
View 4 Replies
View Related
Nov 3, 2010
anyone done an install of a 3 external USB modem? For a Dell pentium 4 laptop. Using Gnome.
View 3 Replies
View Related
Jul 6, 2009
I have not seen a clear cut or concise way to do this. I have copied my Linux system (Debian Lenny) from my internal hdd(hda) to a 160 GB external hdd(sda) hooked up through USB. I want to be able to boot from this external hdd. The system BIOS will allow ... supposedly ... booting from a USB device. I am using LILO with the internal and would rather continue using it. I don't know if it is installed correctly on the external. I seem to doubt it.Can anybody tell me where to look for more info? Or perhaps enlighten me on how to install LILO into the MBR of an external USB hdd.
Any other tips would be great as to how to boot my Linux system off of the external
View 4 Replies
View Related
Apr 11, 2011
I'm running Ubuntu 10.04.
Until yesterday, my Audiophile sound card was working beautifully. I ran the latest update, and now it doesn't show up under Sound Preferences. (When I plugged in a USB headset, that appeared under Sound Preferences and worked just fine.)
The sound card IS listed under aplay -l.
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: Audiophile192 [M Audio Audiophile192], device 0: ICE1724 [ICE1724]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]....
If I run Alsamixer from the terminal, the correct Audiophile sound card is the one shown.
View 1 Replies
View Related
Jul 15, 2010
The default (graphical) installer did not work on my PC (i7 quadcore 8 GB DDR3). I have installed Ubuntu using the alternative installer (Desktop, 64 bit) on my external USB drive. I installed grub on the MBR of the second drive (/dev/sdb) as I did not want to touch my (first) Windows disk. After reboot (chosing the USB drive as boot device, else Windows is booted) grub reports an error and enters the rescue mode. I tried all possible combinations of "root=(hdX,Y)" in grub.cfg to no avail.
I repeated the whole procedure but now disconnected the internal HD with Windows. Installation went smooth again (Windows disk was not seen this time), but after reboot (the internal drive connected or not) I again get (slightly different this time) grub error: can not find file.
View 9 Replies
View Related
