Ubuntu :: Grub2 External Hdd \ Stuck At Installing 10.10 Minimal Version?
Mar 31, 2011
I am having trouble with setting up the grub based system on my external hdd. I am trying to have one grub which is going to load operating systems, and livecd if any (usb install). I am stuck at installing Ubuntu 10.10 Minimal version (i don't need gui for linux).Here is what I have done so far:
1. Created 2 primary partitions - windows 7 recovery and data (ntfs)
2. Created an extended partition for linux stuff.
3. Create a logic partition (10MB) for grub (ext2)
[code]....
View 6 Replies
ADVERTISEMENT
Aug 11, 2010
I have 4 servers with RedHat Enterprise server 32-bit installed. i'm trying to install 64-bit system instead but the hardware has only CD drive (not DVD). When i tried to use external DVD drive and connect it to the USB to install the 64-bit system, it starts ok but then it ask for the media and give me 4 options (Internal CDROM, Internal Harddrive, FTP, NFS). Now i'm stuck with the DVD that system can't read it and i don't have RedHat on CDs and i'm unable to install the 64-bit system.
View 6 Replies
View Related
Aug 9, 2011
I tried doing a search and couldn't find anything relatively recent on the topic so here is my question.
I am fairly new to the linux world and am in the process of trying out a couple different distributions. I am doing this by installing them to an external hard drive. This allows me to test them out without affecting my main system in any way. I have already tried openSUSE and it installed with no problems. I am trying to install Ubuntu, however when the installation tries to install GRUB2 it fails asking me for a different location to install it to.
When installing I unhook all drives from the computer except for the dvd drive, usb drive I'm installing from, and the external hard drive I am trying to install Ubuntu to. I'm not sure what else may be of use.
View 9 Replies
View Related
Jan 8, 2010
After getting some updates like 3 days ago, I get this message: "minimal BASH-like editing is supported. For the first word TAB list possible command completions. Anywhere else TAB lists possible device/file completions. sh:grub>_
What do I do to boot my system? Previously I was able to select from the grub menu. But not in this case. Any suggestions. I have an XP system as well on the same hard drive. I used wubi to install Ubuntu 9.10.
View 6 Replies
View Related
Aug 11, 2010
I used unetbootin (on another machine) to put the ubuntu 10.04 minimal amd64 .iso onto a usb stick. I used it to install a minimal system on a new 64-bit laptop (dual booting with Windows 7). Now, when I turn on the machine I get my choice of OS. When I pick Ubuntu, I get a blinking cursor, the harddrive is accessed. Then the cursor disappears, the harddrive is quiet, and nothing else happens.
View 9 Replies
View Related
Nov 14, 2010
I'm running Ubuntu 10.04 64-bit and my Firefox is stuck at version 3.6.6. Mozilla shows the current version is 3.6.12. What's going on? 3.6.6 is over four months old and has had several security flaws fixed.
View 4 Replies
View Related
Oct 14, 2010
I work at a local computer shop as a computer technician and we get many computer in daily that require external virus scans (having to take out the hard drives, sticking it in another machine) just to scan (if we're lucky we can sometimes just do it in safe mode).Now what I want to know is...
1. Is it possible to install Ubuntu to an external HDD and use it virtually anywhere I plug it in? Will it pick up the network card, graphics card, etc so I can just plug and go? (Of course there are drivers for some computers).
2. Is it possible to run a Windows oriented virus scanner on Ubuntu? I know I can use WINE to run Windows applications, but will it prove to be compliant with virus scanners as well?
3. The main reason why I want it to be able to pick up on hardware and just work is because I plan on using it for schooling / travelling as well, have all my documents etc saved on it for easy access.
I've used Ubuntu in the past on an old laptop that didn't have much memory, small HDD, and a crap processor but that was 5-6 years ago (I still have the disk they sent me for free ).
View 3 Replies
View Related
Feb 17, 2010
After a long time I tried ubuntu(9.10) again on my fileserver, I have some remarks; why does a minimal server installation include X/openoffice? I don't need document conversion on a fileserver and I bet a lot of people don't. Wouldn't it be better to create a new server package and leave minimal minimal? low memory installs (64mb) don't work unless you configure swap by hand in between things, 64mb ram is a lot in my eyes. I mean, not to be rude but if I wanted all this I could've better installed Solaris.
That said it's stable and running fine. Since it's my home fileserver I tried to convert my previously created raid10 mirror on an adaptec 1200 card to a softraid 5 solution. This is wat I did:
[Code]...
View 6 Replies
View Related
Jan 27, 2016
I've just installed debian testing on my computer (netinst AKA basic shell version). Now, how do I do a minimal gnome install? Minimal means, I don't need libreoffice or any extra bloat. However, I do want nautilus, gnome-settings-daemon and networkmanager (and of course, firefox!).
Also, is audio included or not in gnome-shell?
If I just install the gnome-shell package (with --no-install-recommends package), will it pull in gdm, Xorg, etc. or do I have to install them separately? Also, need to confirm whether my sources.list is properly set or not:
Code: Select alldeb http://ftp.security.debian.org/debian/ stretch main non-free contrib
deb http://security.debian.org/debian-security stretch/updates main
View 4 Replies
View Related
Jul 19, 2011
I am literally quite stuck with proftp the version being: ProFTPD Version 1.3.3e# I have the following config:
[Code]...
I mean would I need to logically seperate out a series of passive ports and then open them using my custom routers NAT, so each passive port goes to its own virtual host as such? Just a bit confused about what the next steps would entail I mean I don't have any firewall on my Linux box, don't see the point since I use pfSense and an IPS/IDS and it's never been hacked since!
View 2 Replies
View Related
Jan 22, 2011
so here's my issue and what I think is causing it right now. I have a 1TB external usb hard drive that has worked perfectly, but recently I set it up a mount point for it in fstab so that I could create a SMB share on the drive so I could stream videos and pictures to my TV through my Wii using WiiMC. This now works perfectly, but now the hard drive has been set into read-only mode. When I use sudo to try to chmod the drive or the folders on it, it does nothing. When I right-click on the drive and check the permissions tab, it says the owner is root and all the options are greyed out.
I've read through several posts on similar topics to this, but none of them have been very helpful as they suggest using command line tools that I don't know how to use, so I'm hoping someone here can give me concise, step by step instructions of what to type in, or what settings to change in fstab to solve my little problem so I can start copying stuff back onto my drive. I'm running Ubuntu 10.10 and the filesystem on the external drive is FAT32. Here's some more info you might need:
sudo fdisk -l:
Code:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]...
View 5 Replies
View Related
Jan 12, 2010
I was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
View 5 Replies
View Related
Jan 21, 2010
I was given an external USB drive which has Windows XP Pro on the first partition. I can mount and access the partition with no problem. When I run update-grub, it finds the XP partition and creates a menu entry for it. But when I select it from the Grub menu, I get an error that the device is not found.
Results of sudo fdisk -l
Code:
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00086c27
[Code]....
View 5 Replies
View Related
Jun 5, 2010
I did a fresh 64-bit install of 10.04 workstation a few weeks ago, and my grub seems to "double up" the listings of my kernel versions. I have removed the older versions hanging around on my system, but you can see in the list below, that I still get the listings more than once:
jim@jim-laptop:/etc/grub.d$ sudo update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.32-22-generic
Found initrd image: /boot/initrd.img-2.6.32-22-generic
Found linux image: /boot/vmlinuz-2.6.32-22-generic
[Code]....
View 9 Replies
View Related
Feb 8, 2010
I've tried to be clever but as usual I didn't think before acting and missed a small detail.
I have recently installed karmic (dual booting with Vista) on my dell xps laptop. The install went fine, I'm very happy with my new OS.
I bought a new Seagate 500GB portable external HDD. I got a bit over-excited and installed karmic on the external drive. This worked fine and I got a lovely (but slow to appear) Grub2 menu showing my vista and both ubuntu options.
My problem is that now, when I unplug the external drive, Grub fails and I get a grub rescue> prompt. So I need the external drive to be plugged in if I want to boot.
It seems I have done something to the grub configuration. I have read around the subject but I am not confident about how best to proceed.
I understand there is an 'advanced' option in the installer which will allow me to choose where to install grub. Presumably I want it on the internal drive so that I can boot without the external one plugged in.
Am I right in thinking I can just pop in my install disk and redo the installation?
If I indicate I want to install Grub on the internal drive, which partition should I aim for?
Will I get a grub option for booting to the external drive?
Will I be able to plug the external drive into a different machine and boot from it?
I haven't done anything with the fresh install on the external drive so I don't mind losing that.
View 9 Replies
View Related
Mar 2, 2010
After installing ubuntu 9.10 on external HDD I cannot boot vista if external usb is unplugged(where ubuntu is installed). it says grub loading and after that recover grub ( i think that is what is says ... not certain in this moment ) anyway hope you get my dilemma. If you need more information I'll be glad to provide it.
View 9 Replies
View Related
Aug 28, 2010
I am trying to install Ubuntu 10.04 from a USB drive but every time I reach the option for changing the keyboard layout and press forward, it seems to get stuck. That is, the mouse icon shows that it is loading but nothing ever happening. I even went for a shower, came back and nothing.
View 1 Replies
View Related
Jul 3, 2011
I started installing fedora 15 from CD on a dell Vista Laptop (2hz 1g ram) but after the logo finished turning white it stays on the blue screen with the bird.I have been trying fedora 13 and xubuntu on this cheap old con of a laptop from pc world and things run smooth (E-system 1.7hz 512RAM vista
View 1 Replies
View Related
Mar 14, 2010
I installed Ubuntu 9.10 & grub2 on a Toshiba sattellite laptop last night:
- Win XP shows up in the Grub2 menu.
- When I boot Win XP, it says autock program not found, skipping autocheck, then Win XP stops booting.
- I did a little digging on the net, & found I have to unhide the NTFS partition for Win XP (hd0,1)
- Grub2 doesn't have an unhide command.
- I tried to run parttool, & got the "command not found".
View 3 Replies
View Related
Jun 1, 2010
My smallest disc has the Vista loader and nothing else but I cannot select it for Dual Booting in the Ubuntu installation set up only for use as an entire disc which would delete the Vista Loader.
This is what I have:-
1st disc - no operating system much data
2nd Disc - empty except for Windows loader
3rd Disc - no operating system much stuff.
My original plan was to give Ubuntu all of the smaller second disc and I deleted everything ready to give it the entire hard disc. It was only when I went to install Ubuntu it I found the Vista loader lurking on disc 2 and the only option the install Ubuntu set up gave me for disc 2 was to use the entire disc (wiping out Vista loader) otherwise I could have installed Ubunbtu on another disc - which it reported as having no operating system.
If I put Ubuntu on disc 1 would I have a dual boot arrangement given that the installer saw no operating system on that disc ? Is there any (simple) way I can install Ubuntu on disc 2 and not loose the Vista loader? I am installing this version of Ubuntu as it was on the DVD that came with book "Beginning Ubntu Linux" It took me long time to Psych myself up to install it and when I did . . .
View 9 Replies
View Related
Feb 22, 2010
Im using Linux Mint Helena and just got myself a new HP Deskjet D1663 printer. However, I followed the instructions on [url] but am getting stuck at Step 5A.
When I put the command.
Quote:
make
It gives the error
Quote:
make: *** No targets specified and no makefile found. Stop.
I'm also surprised that the [url] website had no option for Linux Mint 8 (Helena) and thus i had to follow instructions and do installations as per Linux Mint 5 or 6. I hope the Step 2 (Install Dependency Packages) has not adversely affected my Linux 8.
View 3 Replies
View Related
Oct 22, 2010
For some time now I have kept 2 partitions for (K)ubuntu versions so go back if the new one is troublesome.So, I have a common /boot partition, 2 partitions for (K)ubuntu versions and a common data partition which both versions can access.After installing 10.10 I lost the grub connection to the earlier version. This did not happen in the past. So far I've failed to get it back by various attempts to do so.Did I make a mistake in allowing the /boot partition to be formatted during install of 10.10 (can't remember what I did before) or has the /etc/grub.d/os_prober in 10.10 failed in some way?
View 3 Replies
View Related
Jun 15, 2011
I downloaded ubuntu 11.04 and did the usual shizz and it was all going well. I went to get a drink and by the time i got back my computer had completely crashed. I cant move the mouse or anything and it is stuck on 'Installing System'.
Ive restarted my computer (unplug), i had to format the harddrive i was installing it on (luckily it was empty already).
View 4 Replies
View Related
Mar 22, 2011
I'm trying to install Sid in Virtualbox using debian-testing-amd64-businesscard.iso : Expert install, Sid mirror, Standard system utilities....So far, so good. After that I want to install a minimum gnome, but this time ( I've done it before with success ) I got stuck :
What is the best way to proceed ?
View 11 Replies
View Related
Nov 23, 2010
I've tried to install opensuse in a dual boot with xp. I've got an extended partition with root home and swap and primary partitions for xp and boot. The installation freezes at 92% while installing the bootloader, I've tried installing from cd and from usb, with or without boot partition and nothing changed.
View 3 Replies
View Related
May 16, 2010
my simpledrive external drive works fine on windows but i keep getting this error while mounting in ubuntu 10.04 with my account so i log in using the root account and this is what i get
[code]...
View 7 Replies
View Related
May 12, 2010
After >15-yrs using MSWindows, I'm getting a new PC with Ubuntu as my OS. This is for typical home use--net access, web browsing+email, office suite apps.
[code]....
I've read and bookmarked various info on configuring modem, including PPP and wvdial info. But one question: Is there a particular version # of Ubuntu best for external dial-up modem use? I have the CD for 9.10 Desktop edition. It seems that different Ubuntu versions include some things, others not. Another Q: Reading this page about wvdial, it refers only to serial modems. Does the info apply to USB modems, like the USRobotics 5637? [URL]
View 4 Replies
View Related
May 12, 2010
Can someone tell me how to do this? I just formatted a slaved drive for EXT4 and now I'd like to write grub over the MBR. Cannot really find much on Google. tried: grub-install /dev/sda1 and of course didn't work....
View 5 Replies
View Related
Aug 31, 2010
I've had nothing but trouble with GRUB2. Is it possible to use the original GRUB bootloader?
View 3 Replies
View Related
Oct 26, 2010
I'm trying to install GRUB2 on root partition under RAID 5. I tried using the alternate CD, but installation failed. Now I'm trying under the live CD and grub-install ... but I'm being told it can't find the device even though /dev/sda2 (root partition) and /dev/sda are mounted.I have 4 discs, each with a swap partition (/dev/sdX1) and a root partition (/dev/sdX2).
View 9 Replies
View Related
