Sometimes when I should be doing school work and the work is too easy or I don't know how to do it I start to circle loading certain webpages to waste time. I have read XKCD comic and it seems like a good idea.I want to know how to implement 30 second delay before loading certain webpages preferably on OS level. Maybe delaying DNS queries.
View 11 RepliesI have Ubuntu 9.10 and I am trying to get my ALFA network adapter to work. It shows a few wireless locations including my brother who lives beside me. He is going to let me use his internet on my laptop. His connection is opened and I can connect to it fine... but no sites load... I've tried about 4 other open networks that I picked up and the same thing... it sometimes loads the first page but then thats it... This is suppose to be the best network adapter on the market for under $100. I have a 5dBi ant and a 2.4ghz 6dBi ant.
Oh yea, I've tired this on two other ubuntu 9.10 desktops and 1 laptop and get the same thing... I am however able to connect to my wireless router and browser the internet... but I will not have internet much longer
I am running CentOS 5.2 with php5.3 and Mysql. I am running a CRM program called Sugar on the server and I am having a problem where the webpages don't always load correctly. I am not sure if this is something on the program itself or if there is a problem some or other setting on the webserver. I am accessing the server over a local network so I don't think it is connection issues. The server has a static IP.
View 10 Replies View RelatedI am having a problem with internet browsing. Whenever I type the address of any webiste like Google
or URL...or any other, the firefox gives message at "Status Bar" that "Looking up google.com" or "Looking up yahoo.com" etc for every website for about 20-25 seconds and than launches the website successfully. Why this is happening and how can I correct it?I also tried this in Opera and Google Chrome and same problem occurs in them.Moreover, if I ping any domain inside terminal, it instantly starts pinging (with ttl 51) and recieving data from that domain resulting that the problem is with browsers.
I have a 5,2 macbook pro, and I use refit to boot my ubuntu partition. I do not have an OSX partition on the local drive at all. The only partitions that are on the drive are the EFI, ubuntu and swap. Refit lives on the EFI dos partition.I am experiencing a very long delay on power-on before the system will load refit (probably 20-30 seconds) Once it loads everything is normal.
View 1 Replies View RelatedI am brand new to Ubuntu and I am trying to find out if its possible. When the laptop starts it gives me 30secs to choose windows or ubuntu? Is there anyway to change the order or the timer?
View 3 Replies View RelatedAfter GRUB 2 comes up (I'm running Ubuntu 10.10) and I choose the OS to boot, there is about a 5 second delay where nothing appears to happen after I make the selection -- no disk activity. It happens consistently every time I boot. Again, this is after I choose the OS to boot, so it shouldn't have anything to do with the standard delay to allow me to choose the appropriate OS.Is there a good way to troubleshoot this and determine what is causing the delay?
View 4 Replies View Relatedwhat are the steps taken befor instaling ubundu in sata HDD
View 3 Replies View Relatedhow i know if installing ubuntu on my computer ok or not like win 7 microsoft made program to tell us if inhaling win7 ok on my computer or not make problem.do yo have program or way like this to know ubunto ok to my computer or no make problem.
View 8 Replies View RelatedI've a folder named "lynx" in my desktop . It contains ebooks - pdfs,chms etc . The problem is sometimes when i open the folder in nautilus , the folder keep loading forever and sometimes it shows two or three files and keep on loading . But at some other times , folder contents are displayed just as any other folder(i.e normal ).
View 5 Replies View RelatedI installed Drupal and there is only one site. It I access the website [url] where Drupal is installed I can easily see it functioning properly. But on internet it is not loading properly the colors etc are not visible properly.
Following changes were made to all the sites
Code:
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
I'm using a wired DSL broadband connection on ubuntu 10.04,the problem is i am unable to see certain web pages in my firefox and chrome as well... some web pages aren't loading at all.. but these webpages loads in windows. eg of pages not loading [URL]
View 9 Replies View RelatedI use Debian 6. I noticed that when ever I try to open certain websites, the pages doesn't load at all. This happens when I try to open [URL] and certain other web pages. Browsers like chrome, epiphany, iceweasel, opera all had the same issue. The download speed is pretty normal. note that disabling ipv6 inside the browser configuration didn't help fight this issue.
View 8 Replies View RelatedI have recently installed fedora 13 on my desktop, it is ibm hardware, an older 1 gig processor, it is a full install, it functions fine but with one problem. The ethernet card is functioning, however the only web pages I can get to come up is the fedora stuff I believe comes with it. I have looked at the forums and guide and they all say it should connect itself and be good to go, it has found the connection, but cant find anything on the internet. I have two computers connected to a router, when running windows both connect just fine. When I switch mine over to fedora it will not open any web pages, gives me a "cant find the server" message. I have tried several things including changing settings and manually setting IP addresses and mac addresses, nothing has worked.
View 2 Replies View RelatedThe wired internet connection for my notebook works fine after starting up Fedora. Webpages load quickly. But if I close the notebook for as little as 10 minutes, webpages won't load at all, even though NetworkManager still shows that there's an internet connection.
Disconnecting and reconnecting doesn't fix the problem, and neither does logging out and logging back in. Restarting the computer does fix the problem. This problem doesn't occur with Windows 7 on the same machine.
How to can I host my own domain by myself for free?I've installed phpmyAdmin, ehcp, filezilla, mySql, mySql query browser, proftpd, gforge, wordpress, activeperl.I'm not sure either how to make a domain name for my IP address and how to use dynamic DNS.
1) OK, I've got to admit that I'm a newbie in networking.
2) I'm lost with tons of different programs, I don't know where to start from now, there are many methods. I have made many user names and passwords...
3) What to do? I don't want a local web page, All I want is get my web page on Internet where anyone else can visit it.
I recently installed Ubuntu 10.10 x64bit and am having a problem with Firefox. I'm currently dual booting windows 7 and Ubuntu. My net works perfectly on Windows 7 and even on Ubuntu I was able to download a NVIDIA driver and 193MB worth of updates for Ubuntu. I just can't seem to load any webpages on Firefox. I have DHCP enabled but I also tried a static IP address but still had no success. I also tried adjusting my proxy settings in Firefox cycling through no proxy, Auto-detect proxy settings etc. but i still could not load any pages.
The error message is always "The connection has timed out. The server at ubuntu.com is taking too long to respond." I've tried other websites and can't load them. As a point of interest I was able to access my routers web config page.
I've run into problems in some websites where Chrome, Chromium, Firefox and Konqueror will not render the pages correctly (yes, I've installed and tried them all). I've tried on three different computers with dual boot Windows and Ubuntu and get the same results...If I boot into windows, I can browse the pages with no problems, however, in Ubuntu these pages just hang at certain points...Is there some setting I can adjust to improve web performance?[URL]Orbrowse by location, a warning sign appears, click 'agree' and wait endlessly...Why would these pages work correctly on Windows, but not in Ubuntu?I HATE having to boot into Windows, so if I can avoid it I will!
View 9 Replies View RelatedI'm trying to create an archive of a websites images because it tends to go offline now and then. The problem is, when going to the image in full view, it opens it on a php webpage. I've tried using 'wget -m -A.jpg' but it only saves the thumbnails from the menu page instead of the actual images.
View 4 Replies View RelatedI had actually the same problem in 10.10, but I was patiently hoping that 11.04 will fix it for me. At the moment it's facebook(nothing will load) and lifehacker(mainpage will load,but further on no news will load) First of it loads facebook after fresh install, but when i closed firefox, and reopened it, it won't load. I pinged facebook.com and it's working:S Chrome for instance loaded facebook atm, but didnt load lifehacker news aswell. Altho Windows on same machine will do it perfectly. I would like to use 100% ubuntu, but its not possible if some essential webpages won't load
View 3 Replies View RelatedI just recently had to have Ubuntu installed on my computer, and of course, the Web Browser they put on here is Firefox, which I love, however...... Before I had Ubuntu, I had Windows, but due to a problem with a nasty virus, and then not having the original product code for Windows, I couldn't get Windows back on my computer so they put lovely Ubuntu on it. Now, I am a Manager at a hotel, and I have to be able to view my hotel security cameras from home when I am not at work. It is an IP web address and it is not compatible with Firefox. My question is this. Is there any plugin out there that would make webpages that are non compatible with Firefox able to be viewed?
View 9 Replies View RelatedFor some reason I can't load any webpages with FF. I get this error: Firefox can't establish a connection to the server at en-us.mozilla. I can ping everything and ssh and other protocols work just fine. Here is the output of my /etc/resolv.conf file (Comcast)
# Generated by NetworkManager
nameserver 68.87.71.230
nameserver 68.87.73.246
For a page I'm making, there'll be a "make a friend" link, upon clicking which, the user will be taken to a login page, so that they can authenticate themselves (i.e. WHO wants to make a friend). I want the link to be processed by a "makefriendlogin.php" script which will have "person" as an argument, ie. makefriendlogin.php?person=26 (the number comes from a database, don't worry about it). My question is, how do I write the makefriendlogin.php script, so that the "author" argument will be available to the "makefriend.php" script that'll actually do the authenticating for the user when they enter their name and password?
I thought of something like this:
makefriendlogin.php:
<form method="post" action="makefriend.php">
<input name="username" type="text">
<input name="password" type="password">
<?php
[Code].....
I am having problems while testing out squid proxy server. I just can't get it block anything. So, I'm running Debian lenny on my Virtualbox and Squid on it. I'm having windows 7 on virtualbox too and they can ping each other and the webserver on debian (apache2) is working fine. The problem is i can't get squid to block webpages. I have the correct settings on windows proxy settings, but i'm not so sure about squid. I want to block lets say www . xxx. com for example. So I add to the main configuration file:
[Code]...
I like to design my web pages in visual mode like Dream Weaver or M$ Frontpage. good and free software package to design some HTML web pages on Linux?
View 6 Replies View Relatednow when i key the server ip on my 2nd pc it brings up the It Works default page (Apache2), but when i visit a subfolder which has wordpress-mu installed in i get a 403 forbidden error... how to i enable myself to view this particular folder? here's the .htaccess file on the wordpress mu folder:
[Code]...
So I have a laptop that I installed 9.10 on recently and for a bit everything was going fine. I have done a few updates over the course of the past week and for a couple days now I have got a huge problem. I am unable to view web pages without having to refresh them over and over until it finally loads. I thought this issue was only with Firefox and I researched the issue and ended up disabling ipv6 in FF. To no avail.
Synaptic Package Manager also will not connect to the internet. It will receive the list of updates but as soon as I click install it sticks on Downloading File 1 of XX. Since it wasn't limited to Firefox and there is debate on whether ipv6 slows down connectivity, I have disabled it system wide. Also to no avail. I have confirmed this to be so with wired and wireless connections to my router.
I just installed Ubuntu, and the Wifi works just fine - E.g. downloading updates works like a charm But when I try to access a page in Firefox or Chrome they just keep loading the webpage, but never show me anything For the record, I'm using 10.04 32-bit. Don't know how must more information to give..But from this, does anyone have an idea, on how to fix it?
View 5 Replies View RelatedI am new to ubuntu netbook remix. I have recently installed it on my emachines em250 netbook and my wireless is connected to my router but when I go to view a web page it says it cannot be found. I am unable to view web pages unless I am connected to my router via ethernet cable.
View 2 Replies View Related