Networking :: Long Delay In Website Loading
Apr 26, 2010
I am having a problem with internet browsing. Whenever I type the address of any webiste like Google
or URL...or any other, the firefox gives message at "Status Bar" that "Looking up google.com" or "Looking up yahoo.com" etc for every website for about 20-25 seconds and than launches the website successfully. Why this is happening and how can I correct it?I also tried this in Opera and Google Chrome and same problem occurs in them.Moreover, if I ping any domain inside terminal, it instantly starts pinging (with ttl 51) and recieving data from that domain resulting that the problem is with browsers.
View 1 Replies
ADVERTISEMENT
Apr 23, 2010
I have a 5,2 macbook pro, and I use refit to boot my ubuntu partition. I do not have an OSX partition on the local drive at all. The only partitions that are on the drive are the EFI, ubuntu and swap. Refit lives on the EFI dos partition.I am experiencing a very long delay on power-on before the system will load refit (probably 20-30 seconds) Once it loads everything is normal.
View 1 Replies
View Related
Aug 9, 2010
My problem is that every time I use the Ethernet connection (I don't have wireless card) there is a delay of around 30s, even though my download speed is not affected at all once the connection is "established" , no matter what application I use (Synaptic, ssh, firefox, google chrome,wget, update manager, etc.). A weird thing is that my ethernet connection always appears as active.
I'm sure I'm not the only one who has experienced this issue, since I've read the same problem on other forums, but no one has come up with a solution. I hope that there will be a solution at last by this time.
I've been around with this problem for about 1 month, I've tried all sorts of tweaks that involve disabling ipv6 and nothing happens. I don't really know what triggered off this issue because it all started all of a sudden and I don't remember having installed any important update by the time this happened (I did a clean installation of Ubuntu 10.04 32bits on the release date).
View 3 Replies
View Related
Aug 22, 2011
I just installed Fedora on my desktop (previously Ubuntu)
The root and boot partitions are on a OCZ RevoDrive, which is seen as 2 separate drives and used software raid0 for speed.
Here is a link to my bootchart, which shows a 17sec delay before anything starts.
[url]
md0 and md1 are on the RevoDrive, the boot is a raid1 partition (as i was unable to boot from a raid0 partition) and the root partition is a raid 0 partition
Code:
Any one know away to get rid of the delay at the start of the boot chart?
View 3 Replies
View Related
Jan 26, 2016
Im experiencing a long delay before the gdm login screen appears in debian jessie with kernel 4.4 and also with the distro kernel 3.16
there in the Xorg.log
Code: Select allX.Org X Server 1.16.4
Release Date: 2014-12-20
[ 22.516] X Protocol Version 11, Revision 0
[ 22.516] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[code]...
they claim to have fixed the issue after kernel 3.4 so i must have some missconfiguration causing this loop.
View 2 Replies
View Related
Feb 21, 2010
I'm trying to track down a longggg delay during OpenSUSE 11.2 boot. It's 1 to 2 minutes long.
1. I upgraded the kernel to "vmlinux-2.6.31.12-0.1-desktop.gz" a while back, and I'm "kind of" thinking this is when it began. It seems in previous versions (I came from 10.3) that the grub menu always contained the previous version. That doesn't seem to be true in 11.2. Is there any way to tell OpenSUSE YaST/zypper to keep the previous version and leave the entry in grub?
2. What does this message mean: "BIOS EDD facility v0.16 2004-Jun-25, 2 devices found"?
I haven't pinpointed the error, and there is nothing really obvious in /var/log/messages. The drives are there, and the network is up. I'm sort of leaning towards the new kernel. What processes wait 60 seconds? If I watch the console closely for the message before the delay, it can vary.
View 6 Replies
View Related
Jan 7, 2011
I'm running ubuntu on a macbook5,4, and I get a 30-second long pause during the boot sequence. (I have quiet turned off.) This shows up in dmesg as:
Code:
[ 1.847208] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.000059] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 2.239138] hub 4-1:1.0: USB hub found
[ 2.242107] hub 4-1:1.0: 3 ports detected
[ 2.590102] usb 3-5: new low speed USB device using ohci_hcd and address 2
[ 2.672282] scsi 6:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
[ 2.672863] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.674243] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.160035] usb 3-6: new full speed USB device using ohci_hcd and address 3
[ 3.492058] usb 4-1.1: new full speed USB device using ohci_hcd and address 3
[34.373586] udev[417]: starting version 163
[34.422599] lp: driver loaded but no devices found
[34.503755] lib80211: common routines for IEEE802.11 drivers
[34.503759] lib80211_crypt: registered algorithm 'NULL'
[34.508256] wl: module license 'MIXED/Proprietary' taints kernel.
[34.508260] Disabling lock debugging due to kernel taint
Details:
Linux jagadai 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux
Grub.
Dual boot with OS X 10.6.4 using rEFIt. It shouldn't be at all relevant, but I'm using E17 on top of kdm.
View 3 Replies
View Related
May 22, 2011
I'm running Natty with Unity 3D. I had a long black screen with no Plymouth Ubuntu logo boot. After the black screen, Natty loaded straight into desktop.
Then I installed this [url] Which now gives my Grub2, about 10 seconds of black screen, Plymouth Ubuntu Text boot and then desktop.
Any way to remove that long delay?
HP Pavilion dv7 Notebook PC
Ubuntu 11.04 amd64.
NVIDIA Driver Version: 270.41.06 (Recommended driver)
1440x900-24 Resolution
View 3 Replies
View Related
Mar 28, 2011
After I boot up into 11.4, the desktop/icons appear but then there is a delay of about 20 - 30 seconds before the bottom-right task bar items appear. During that time, I can't start any applications. This happens on both desktop PC's, very frustrating and not present with 11.3.
View 9 Replies
View Related
Dec 25, 2010
I'm having a problem where almost every audio player creates a 2-3 second delay after playing any audio.
I'm working on some text-to-speech using espeak and festival. Festival would provide much better speech quality, but it created a 2-3 second delay after any speech before the application exited, which prevents using it. When I started investigating the issue, it turned out that many other programs display the same behavior.
For example, if I play a 1-second WAV of silence using "play", it displays "Done" very soon and then waits for 2-3 seconds before exiting. mplayer does the same. mpg123 does the same. mpg321 does the same. ogg123 does the same.
When playing multiple files mpg123 and ogg123 do not generate the pause between the files, but mplayer does. I'm wondering can there be a bug that causes programs to hang when closing the audio device?
That's so many programs it must be some kind of problem in the system, not the individual programs. However not every program displays this behavior; espeak exits immediately after the speech has ended. (Might it for instance exit without closing the audio device properly?)
I haven't noticed anything similar before I upgraded to 10.10. I'm running XUbuntu on a Thinkpad T60. The laptop has an Intel HD Audio with AD1981HD codec [url].
View 3 Replies
View Related
Jan 27, 2016
When I boot up, or come out of standby, etc, it takes about a minute for my Windows shares on Win 7 to show up under Network. Is there anything I can try that will make this initial connection faster? Either on Debian or the Win7 machine? I have the latest Debian vanilla. This is over wifi. My other devices list the shares right away.
View 1 Replies
View Related
Feb 17, 2011
I've set up a cups printing server using ubuntu 10.04.1 LTS. The printer's a HP Laser Jet 1018 I can connect to it over vpn using openvpn from my netbook which is also running ubuntu 10.04.1. I can connect to the printer all right and test page prints without a problem. But if I try to print anything else, it take at least 5 minutes before the job is successfully send and printed out.
Also, on the client side, for example, the file size would like 500k, and when it finally prints out, the file size on the server side is less than 10k. The file is a black and white document, and from what I can tell, the printed page is not missing any information.
View 3 Replies
View Related
Jul 18, 2011
I have a Macbook 5,2, on which I'm triple booting OS X - Linux - Windows, using bootcamp and rEFIt.I had a variation of Ubuntu 10.04 called Uber Student as the linux installation.I installed Ubuntu 11.04 AMD64 instead, by choosing the EFI boot option.Now this gave me some problems. When I shot down, the Macbook gives me a troubling long beep sound.When I start up, I'm still able to boot up into rEFIt and Grub2, but there is a big delay with the screen being black for about 30 seconds and the little white light in the left corner of the Macbook is blinking feverishly. I read something about a guy which had a similar problem and the process seemed to mess up the firmware on his Macbook, so he had to have his MB changed.
What's up with the scary beep sound and the long boot up delay?Secondly, when I want to do an update of the Ubuntu system, the update manager asks me to do a partial upgrade, which includes removing the grub-EFI, resulting in a system that won't boot...
View 2 Replies
View Related
Mar 3, 2011
Sometimes when I should be doing school work and the work is too easy or I don't know how to do it I start to circle loading certain webpages to waste time. I have read XKCD comic and it seems like a good idea.I want to know how to implement 30 second delay before loading certain webpages preferably on OS level. Maybe delaying DNS queries.
View 11 Replies
View Related
May 27, 2010
I am using KVM and created four guest Operating systems on it.The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment.One of our website is running on CentOS VM.Right now there is no traffic on the website static HTML pages.I do not have any clue as why it was taking longer time to be accessed.
View 2 Replies
View Related
May 30, 2010
I am brand new to Ubuntu and I am trying to find out if its possible. When the laptop starts it gives me 30secs to choose windows or ubuntu? Is there anyway to change the order or the timer?
View 3 Replies
View Related
Aug 5, 2010
I'm running Ubuntu Lucid Lynx (kernel 2.6.31-24). After booting, when the "pink screen" comes up, the login dialog doesn't appear for about a minute, and the KB and mouse are frozen. It takes another 30 seconds before the KB and mouse unfreeze and I can type in my password.
View 3 Replies
View Related
May 27, 2010
I am using KVM and created four guest Operating systems on it. The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment. One of our website is running on CentOS VM. Right now there is no traffic on the website static HTML pages. I do not have any clue as why it was taking longer time to be accessed.
View 17 Replies
View Related
Nov 20, 2010
The example can be viewed here:http://texasflyfishers.org/reports/i...ic,1461.0.htmlI am using this BBcode:
Code:
[img width=343 height=512]http://www.texasflyfishers.org/images/Emily.jpeg[/img]
HTML Code:
[code]....
View 1 Replies
View Related
May 5, 2010
My children use the Webkinz web site for fun and games. The site works with other LINUX OS (Ubuntu) , but I can not get it working with Fedora 12 or 13, 64 bit. I have installed flash from the [URL] Fedora wiki and flash works (I have tried both 32 and 64 bit versions). The webkinz site loads, but none of the buttons or games work (Try using the log in button, a new window should open asking for user name and password).
View 2 Replies
View Related
Oct 28, 2010
The basics: Ubuntu 10.04 Lucid x64 with Firefox 3.6.11 on a Thinkpad T61p 2gb ram/500gb HD. When I try to access my email via Squirrelmail, Firefox hangs on loading. If I stop the page from loading, wait a few minutes, then try again, I have a 50:50 chance of it loading this time.
I've run the update to make sure I have the most recent versions of software, but it still hangs. I've tried a few cursory searches, but find nothing referencing Lucid or that is otherwise current.
View 3 Replies
View Related
Mar 18, 2010
I'm Dual-booting XP with Ubuntu Karmic Koala, heres my other specs:
CPU: Intel Pentium D 3.0Ghz family(15) model(4) stepping(4)
GFX: Geforce 7800 GT (had problems with GFX when I first installed Ubuntu, I had to update my drivers)
2 GB RAM
This is a nearly fresh install of Karmic Koala, I've only installed whatever updates I needed, graphics card drivers, KPlayer, and Google Chrome. Because I prefer Chrome over Firefox I immediately went to download Chrome, and Firefox would get to the Chrome page and then crash. I then got the Chrome install file from another computer and installed it. Chrome will not even launch, so I go to search the problem in Firefox and it crashes on ANY link I click in Google Search. I also tried to directly type websites into the URL box: it loads the pages title (Ex. "Yahoo! Mail"), and crashes before displaying the page at all.
This is a very odd problem to me as I used the same disc to install dual-boot with Win7 and Ubuntu on my laptop which works perfectly, and now this happens to my desktop.
View 6 Replies
View Related
Oct 2, 2010
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
View 2 Replies
View Related
May 11, 2011
After GRUB 2 comes up (I'm running Ubuntu 10.10) and I choose the OS to boot, there is about a 5 second delay where nothing appears to happen after I make the selection -- no disk activity. It happens consistently every time I boot. Again, this is after I choose the OS to boot, so it shouldn't have anything to do with the standard delay to allow me to choose the appropriate OS.Is there a good way to troubleshoot this and determine what is causing the delay?
View 4 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Jan 9, 2010
just start Ubuntu 9.04 said: File system chek failed a long is beging saved /var/long/fsck/checkfs if that location is writable Please repair the file systmen manually A maintenance shell will now be started Ctr+ D terminate this shell and resume system boot. Give root password for maintenance or type Control +D to continue. I did Ctr+D , and after login said , that can not find /home. I starte with the live cd:
[Code]....
View 9 Replies
View Related
Apr 18, 2010
I open Firefox, Some Website Works, on some other Website Firefox Says "Connecting to...",but all the Sites I have Tested working on my Windows 7.
View 3 Replies
View Related
Mar 7, 2011
I am using squid 2.6 on my cent os 5.We r using 4 Mb/s link. I want to assign bandwidth allowcation to my boss like 512 Kb/s and 256 kb/s to its assistant.both are using class c IP address. How can I allocate bandwidth of their IP address.
View 1 Replies
View Related
Dec 7, 2010
I am trying to read the /proc/net/tcp6 file of a huge server (chat server) for monitoring the tcp6 connection states.
This tcp6 file has more than 26000 lines. For monitoring the server connections, my monitoring tool has to read the /proc/net/tcp6 file quickly in regular interval. Presently it takes minimum 6-7 seconds for reading the whole file.
My tool can able to read the normal file (26,000 lines) less than 1 second, but it is not possible to read the same size of proc file.
I have 2 questions:
1) Why proc file takes more read time than normal file?
2) Is there any way to read the /proc/net/tcp6 file more quickly?
View 1 Replies
View Related
Apr 2, 2011
I have install squid 2.6 in my cent os 5 system. The proxy server is working perfect using the following method.
Code:
[root@localhost squid-2.6.STATBLE22]# ./configure@--prefix=/usr/local/squid
I want to enable delay pools feature in it.For that purpose I do as following
Code:
[root@localhost squid-2.6.STATBLE22]# ./configure --enable-delay-pools && "configuration successful"
The question is should I configure it as I do it for squid
./configure --enable-delay-pools--prefix=/usr/local/squid
To enable delay pools may I need the correction in the steps which I have taken.
[root@localhost squid-2.6.STATBLE22]#make
[root@localhost squid-2.6.STATBLE22]# make install
In short to enable delay pools may I just use
# ./configure --enable-delay-pools
then
#make
#make install
View 3 Replies
View Related
