i'm using CentOS 5 (final), & i have a domain used to send commercial emails to a lot of emails in hotmail & other companies,,his daily messages about 200,000 message i told him to not sent above 500 hundred message each time, to not get junked or blocked from hotmail, as there policy doesnt allow more that 500 simultanous connections each time, & wait about 15 minutes between each time,, trying to not get junked ,,
but also the mail server IP get junked, so i changed the mail server IP my question now is there any guides or steps to follow when sending emails to hotmail ?? my customer is working in a commercial field, so this means that his job depends on sending emails ,,
I know there are Linux email clients but I like Hotmail. I upgraded to Karmic and I'm very happy with it. The only issue I have found is I can't get the unread email to have bold text. I've tried downloading a number of fonts but no deal. Anyone know the font package I need to make this work?
I'm running Evolution 2.30.3 on fc13.x64 and I've been getting a funny problem for a while, that now really annoys me:
even if the settings for my hotmail account are correct, Evolution will ask for the password every time I log in. Also, since I keep it open, after a while (~30 minutes) it "forgets" somehow the password and asks for the password again. This time, anyway, it won't work and I have to reset Evolution again.
Bonus question: even if hotmail is configured correctly for receiving and sending (smtp.live.com etc.), it won't send email, but will remain stuck on "sending".
First thing I will say is I am new this site and computers in general. I have pc and am running back track 4. Today the computer shut off, maybe an over heat. I restarted it and it turned off again even before the reboot finished. I put an additional cooling fan in front of the air intake and the computer is staying on but now will not open the emails in the my hot mail account. It seems to open the account, I can see what is in my in box just can not open them. Moving the curser over the unopened email usually made what is in task bar at the bottom of the page change. As of now it continues to say "Done" in stead of showing a task. Moving the curser over other things on the same page will make the task bar say "javascript" only.
i'm using fedora 12 and i wanna send mail using command $mail actually i tried to send mail to my gmail , yahoo ,and hotmail emails but i didn't receive the mail so i expect that i should have some configuration on my host before sending mai
i was asking how to build a CentOS Exim mail server, & gaurantee that all mail messages will be delivered to hotmail inbox ??hotmail said that it will only accept 500 simultanuos connections (=500 messages) to its mail servers from only one IP address, so is there an exim options that i can use to limit messages that sent through the mail server to hotmail to be sent as 500 messages then send another 500 & so on
If you leave your hotmail account signed in on a proxy server, can others access that account by just typing in [url] in their browsers? ie does the proxy server share all connections to the same site with logins?
How to configure my home linux server, as an email server, and be able to send email to hotmail, please?. I have done this before, but I never managed to do it so hotmail accept emails coming from my linux server.
Have anyone used an email client that stays in sync with a free Hotmail account? I have setup Claws Mail but when I delete an email within the client it remains on the server. I remember this being the same for other email clients. Is there any client that will stay in sync? If I delete an email from within the client it will also be deleted from Hotmail's web bases interface.
Could it be the IMAP file is corrupt?I have set up mail server on Centos to receive via dovecot.One of my user accounts (A single account out of a hundred)cannot receive their mails.
I am newbie to postfix. I added a new domain to my postfix server in the main.cf under mydestinations variable and the relay_domains file. Also, added this domain to my backend exchange server. When I send a test message from the new domain, my messages from that domain appear to be stuck in the "queue active". What does it mean when you are stuck in this queue? Does this mean that my backend email server (exchange 2003) isn't allowing messages from this new domain OR that the POSTFIX server still needs configuring.
I've a CentOS Box with no control panel.. I used to manage it via SSH. Any way, I've installed CSF/LFD on it.. and it seemed to be working just fine. The only problem I've encountered is that when I start and enable CSF, messages and emails keeps stocked in the mail queue.. I've double checked and made sure needed ports are opined.. But, I still have the problem.
I have Dovecot up and running however Thunderbird nor Evolution can see mail in the users inbox. Getting no errors from them either thunderbird nor Evolution.On the server (Cento 5.3) the email is in /var/spool/mail/ username. Sending a receiving email on the server itself whats fine using the mail commands. Is their a setting in Dovecot I'm over looking?
I'm having trouble using my hotmail account on Evolution. It used to work just fine but I when I opened Evolution today the following error ocurred: Could not login on server POP3 pop3.live.com. Error when sending username: -ERR command not expected now It then asks me to put my hotmail password... which I do and the same error appears again. Can someone tell me what's going on?
I use php to send newsletter via sendmail.outgoing emails work as needed.I defined a .forward file to get responses in my regular email account.If I use mailx to send emails from root account to my own account, it gets forwarded as needed.If I try to send from outside the box to news@domain.com the email is not received in the box and the sender does not receive an error message.
I am sure I missed something.How do I enable incoming emails?
I've a mailserver based on postfix. I'm queueing all the emails that have to be sent. After that I'm managing the queue with the output of mailq.
But in this way I'm just able to have this details of the queued mails: sender, receiver, size, time. There is a way to see also the subject of that emails?
I'm stuck with postfix. It cannot send emails and I cannot find out why! smtpPort 25/tcp is open. I can telnet localhost with 25, but not the localhosts IP(192.168.1.15). Sendmail is OFF. Here is the main.cf file!
# See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default
In linux is there a way to read a mail from particular mail id and the mail content should be written to text file.is it possible, if possible can any anyone share the idea behind that.
I am working for the first time on a dedicated server with CentOS. I have sendmail and postifx installed and I realized all the emails send by the server are redirected to my own private address.
For example if I want to send an email to "luc@test.com", I will receive it in my box (ex "paulin@gmail.com")... I also receive in my box the logwatch which should be send to root@serverblabla.live-servers.net
That is very strange and I really don't understand what does that.
I installed openSUSE on one of the spare computers in work to test it out before I install it on my own laptop. I tried connecting Kmail to MS exchange and did so successfully using POP 3 but never checked the box saying leave messages on the server and it removed the emails from the server. Now I have nothing in my Outlook Inbox on my XP machine. how I can restore the emails from Kmail to the server.
I have wordpress installed on my VPS, which is running 10.04.1 LTS. I appear to be having an issue whereby the server isn't sending out emails to new users, nor to myself when I get comments on the blog.I'm at a dead end for where to look next, because the settings are exactly the same as they were with my previous VPS (and they were always pretty generic), but yet it doesn't work.
I work for a university institute and administrate its servers "incidently". Currently I am putting some work into our mail server configuration (sendmail 8.13.1 with amavisd-new-2.6.4). Recently I got amavis to verify DKIM signed mails. Now my plan was to sign outgoing Emails ourselves. This is what I have done (I replaced some names for privacy reasons):
I created a private key:
Code: /usr/local/amavisd/amavisd genrsa /var/dkim/SEL1_DKIMkey.pem Changed permissions for the user running amavis: Code: chown -R vscan.vscan /var/dkim/ && chmod -R 700 /var/dkim Editet my /etc/amavisd.conf:
[Code]....
Send Testmails to sa-test@sendmail.net and check-auth@verifier.port25.com . They automatically create answer mails considering signature information.
Send emails to my external account at some other provider.
The problem is that amavis is not signing the mails. Both automatic test emails reported, that the mail had not been signed. The mail to my external account also did not contain any DKIM information.
"My" system:
Code: # uname -r & cat /etc/issue 2.6.9-89.0.11.ELsmp Red Hat Enterprise Linux AS release 4 (Nahant Update 8)
1. I have registered Domain name/website, suppose = test.com, hosted on another ISP.
2. I have another Static IP, suppose = 1.2.3.4
3. Now I want to setup/configure mail server to send and receive Emails for "test.com", say a user from anywhere can use mail server by using webaddress of "mail.test.com"
4. Mail server will be mange locally in my own setup, accessible from everywhere.
5. Please give some examples, howto use registered domain name (for example = test.com) with static public ip (suppose= 1.2.3.4), so user can use only mail.test.com, not static ip address.
I am doing this project for our school. Basically we want to pipe all incoming emails to a script which filters out certain messages (not only spam but duplicates, large messages, etc). If they fail certain criteria, the script simply does nothing.If they pass , then the script should pass the entire message (headers and body) back on to qmail to send. The piping part is not a problem, but I am stuck with the next part. Is there a way to pass the headers and body back to qmail for it to process and send, as if it received it the first time?Some details:A catchall email account is created via Plesk control panel on linux (centos).THe .qmail file in /var/qmail/mailnames/domain.com/catchall/ is edited to include the line:-|/path/to/pipe/handler.phpThe handler.php file simply reads the entire message (headers and body) and they are then parsed and analysed.
I have configured Postfix on a Ubuntu 8.04 box using this tutorial:I can send emails but I cannot receive any email because of a "bad recipient address syntax:"The log from /var/log/mail.info says this:
