I have Dovecot up and running however Thunderbird nor Evolution can see mail in the users inbox. Getting no errors from them either thunderbird nor Evolution.On the server (Cento 5.3) the email is in /var/spool/mail/ username. Sending a receiving email on the server itself whats fine using the mail commands. Is their a setting in Dovecot I'm over looking?
View 1 RepliesWe're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.
Quote:
Quote:
Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.
i was asking how to build a CentOS Exim mail server, & gaurantee that all mail messages will be delivered to hotmail inbox ??hotmail said that it will only accept 500 simultanuos connections (=500 messages) to its mail servers from only one IP address, so is there an exim options that i can use to limit messages that sent through the mail server to hotmail to be sent as 500 messages then send another 500 & so on
View 2 Replies View RelatedI installed sendmail in my fedora 7 system. i took the advice as provided in this url [url] I started with "Configuring s`endmail"
Then i went with installing MailScanner without going to clamav and spamassasin installation as i don need it.
I just configured my local domain and assigned a my own IP address. But there was nothing mentioned with configuring the port number. So i just went with "netstat -nl" command. And it showed that my IP is lisening on port 53.
I created 2 users for the domain and i sent mail via telnet. The mail entry got entered in maillog file. But i receive multiple unwanted entries that mail is sent from "root" to "root". But i didn't bother about that.
I proceeded with the next step of configuring the two users on thunderbird. I configured with pop3 on port 53 with the localdomain. Now i sent mail from one user to the other. The mail entry got stored in maillog but i couldn't retrieve the mail on my inbox.
But the mail gets stored in /var/mail/<user>
How to refresh and reload the list of email into MUTT ? Which key?
Additional: how to go to folder SENT of gmail ? and configureation eventually?
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies View RelatedCould it be the IMAP file is corrupt?I have set up mail server on Centos to receive via dovecot.One of my user accounts (A single account out of a hundred)cannot receive their mails.
View 3 Replies View RelatedI am newbie to postfix. I added a new domain to my postfix server in the main.cf under mydestinations variable and the relay_domains file. Also, added this domain to my backend exchange server. When I send a test message from the new domain, my messages from that domain appear to be stuck in the "queue active". What does it mean when you are stuck in this queue? Does this mean that my backend email server (exchange 2003) isn't allowing messages from this new domain OR that the POSTFIX server still needs configuring.
View 2 Replies View RelatedI have some problems with my email server. i'm using qmail and fedora 10: There're 100 email account on my email server , but there's only email account that is scd@scd.or.id which's slow to open when i click theinbox but other email account on my email server is normal when i click the inbox. ow Could it happen ? and How to fix it ??. Anyone know, how to resend a queue message in qmail ?. Eachtime I send a message from my email server to email account in yahoo is always delay or unreceived by yahoo meanwhile at the same time , i check my sent box is notified delivered to yahoo. How Could it happen ? and How to fix it ??
View 2 Replies View RelatedI've a CentOS Box with no control panel.. I used to manage it via SSH. Any way, I've installed CSF/LFD on it.. and it seemed to be working just fine. The only problem I've encountered is that when I start and enable CSF, messages and emails keeps stocked in the mail queue.. I've double checked and made sure needed ports are opined.. But, I still have the problem.
View 2 Replies View RelatedI use php to send newsletter via sendmail.outgoing emails work as needed.I defined a .forward file to get responses in my regular email account.If I use mailx to send emails from root account to my own account, it gets forwarded as needed.If I try to send from outside the box to news@domain.com the email is not received in the box and the sender does not receive an error message.
I am sure I missed something.How do I enable incoming emails?
I've a mailserver based on postfix. I'm queueing all the emails that have to be sent. After that I'm managing the queue with the output of mailq.
But in this way I'm just able to have this details of the queued mails: sender, receiver, size, time. There is a way to see also the subject of that emails?
I have lenny with postfix, countier-imap, squirrelmail installed i can send emails but i can not receive any emails.
View 6 Replies View RelatedI'm stuck with postfix. It cannot send emails and I cannot find out why! smtpPort 25/tcp is open. I can telnet localhost with 25, but not the localhosts IP(192.168.1.15). Sendmail is OFF. Here is the main.cf file!
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
[code]..
In linux is there a way to read a mail from particular mail id and the mail content should be written to text file.is it possible, if possible can any anyone share the idea behind that.
View 1 Replies View RelatedI am working for the first time on a dedicated server with CentOS. I have sendmail and postifx installed and I realized all the emails send by the server are redirected to my own private address.
For example if I want to send an email to "luc@test.com", I will receive it in my box (ex "paulin@gmail.com")... I also receive in my box the logwatch which should be send to root@serverblabla.live-servers.net
That is very strange and I really don't understand what does that.
I installed openSUSE on one of the spare computers in work to test it out before I install it on my own laptop. I tried connecting Kmail to MS exchange and did so successfully using POP 3 but never checked the box saying leave messages on the server and it removed the emails from the server. Now I have nothing in my Outlook Inbox on my XP machine. how I can restore the emails from Kmail to the server.
View 6 Replies View RelatedIs there a way to delete all the emails on the server so there are no emails in my inbox? I'd like to start fresh for the new year.
View 8 Replies View RelatedI have wordpress installed on my VPS, which is running 10.04.1 LTS. I appear to be having an issue whereby the server isn't sending out emails to new users, nor to myself when I get comments on the blog.I'm at a dead end for where to look next, because the settings are exactly the same as they were with my previous VPS (and they were always pretty generic), but yet it doesn't work.
View 5 Replies View RelatedI work for a university institute and administrate its servers "incidently". Currently I am putting some work into our mail server configuration (sendmail 8.13.1 with amavisd-new-2.6.4). Recently I got amavis to verify DKIM signed mails. Now my plan was to sign outgoing Emails ourselves. This is what I have done (I replaced some names for privacy reasons):
I created a private key:
Code:
/usr/local/amavisd/amavisd genrsa /var/dkim/SEL1_DKIMkey.pem
Changed permissions for the user running amavis:
Code:
chown -R vscan.vscan /var/dkim/ && chmod -R 700 /var/dkim
Editet my /etc/amavisd.conf:
[Code]....
Send Testmails to sa-test@sendmail.net and check-auth@verifier.port25.com . They automatically create answer mails considering signature information.
Send emails to my external account at some other provider.
The problem is that amavis is not signing the mails. Both automatic test emails reported, that the mail had not been signed. The mail to my external account also did not contain any DKIM information.
"My" system:
Code:
# uname -r & cat /etc/issue
2.6.9-89.0.11.ELsmp
Red Hat Enterprise Linux AS release 4 (Nahant Update 8)
1. I have registered Domain name/website, suppose = test.com, hosted on another ISP.
2. I have another Static IP, suppose = 1.2.3.4
3. Now I want to setup/configure mail server to send and receive Emails for "test.com", say a user from anywhere can use mail server by using webaddress of "mail.test.com"
4. Mail server will be mange locally in my own setup, accessible from everywhere.
5. Please give some examples, howto use registered domain name (for example = test.com) with static public ip (suppose= 1.2.3.4), so user can use only mail.test.com, not static ip address.
I am doing this project for our school. Basically we want to pipe all incoming emails to a script which filters out certain messages (not only spam but duplicates, large messages, etc). If they fail certain criteria, the script simply does nothing.If they pass , then the script should pass the entire message (headers and body) back on to qmail to send. The piping part is not a problem, but I am stuck with the next part. Is there a way to pass the headers and body back to qmail for it to process and send, as if it received it the first time?Some details:A catchall email account is created via Plesk control panel on linux (centos).THe .qmail file in /var/qmail/mailnames/domain.com/catchall/ is edited to include the line:-|/path/to/pipe/handler.phpThe handler.php file simply reads the entire message (headers and body) and they are then parsed and analysed.
View 2 Replies View RelatedI have configured Postfix on a Ubuntu 8.04 box using this tutorial:I can send emails but I cannot receive any email because of a "bad recipient address syntax:"The log from /var/log/mail.info says this:
Code:
Apr 25 14:46:06 360romania postfix/pickup[31716]: 74A682190661: uid=0 from=<root>
Apr 25 14:46:06 360romania postfix/cleanup[32402]: 74A682190661: message-
[code]...
is there any way to put Disclaimer words on every outgoing emails (both HTML and Plain text email)? ..
View 1 Replies View RelatedIs there any way can read content of email in queue? Or emails sent in few last seconds?
View 1 Replies View RelatedI am done with installing cron jobs for performing rebboting operations, now my requirement is sending the bootlogs to an email address.
View 1 Replies View RelatedI configured dk-milter on a server and created dns records for that, But I'm not getting sendmail to sign emails. dk-milter configuration is correct but the problem with sendmail.
[Code]...
i'm using CentOS 5 (final), & i have a domain used to send commercial emails to a lot of emails in hotmail & other companies,,his daily messages about 200,000 message i told him to not sent above 500 hundred message each time, to not get junked or blocked from hotmail, as there policy doesnt allow more that 500 simultanous connections each time, & wait about 15 minutes between each time,, trying to not get junked ,,
but also the mail server IP get junked, so i changed the mail server IP my question now is there any guides or steps to follow when sending emails to hotmail ?? my customer is working in a commercial field, so this means that his job depends on sending emails ,,
I'm wondering why we can't received email when our primary DNS went down. We have slave DNS but don't know why we can't receive emails. Internet is working properly. The mail file in /etc/configuration on slave dns are there & the zone file is added. I edited the mail zone file to see if it works & restarted the named service. But still we can't received emails using the slave DNS. Do I need to reboot the server?
View 12 Replies View RelatedI have just installed iRedMail-0.6.1 to my Ubuntu 10.04 powered server. I can receive emails from mail accounts on my server and I cal also send emails from those accounts to other servers like gmail.The problem is I cannot receive emails from gmail, hotmail or any other server.
View 2 Replies View Related