Software :: Avg Time For Handbrake Completion Over 2 Hours?
Jan 11, 2010
Does someone have an average time on how long it takes for a DVD to AVI session should take? I have been converting some DVD to AVI and on a mac it takes roughly 20 minutes to finish, on Debian it takes over 2 hours, same settings, same options bitrate resolution etc. I cant see how going from 18x to 16x increases the time 2+ hours. So there must be somethinbg I am missing.Or if there is a better DVD to AVI ripping software available please share it.
View 2 Replies
ADVERTISEMENT
Jan 11, 2010
How do i log the start/completion (time&date) of my cron job script? i want to be able to see what time it started and what time it finished? and if there where any errors while running my script.
View 3 Replies
View Related
Sep 18, 2010
I have an Asus laptop with both Win7 and Fedora. Whenever I change the time in Fedora to the correct time and reboot into W7 the W7 time is messed up - about 7 hours earlier. If I set W7's time to the correct time and then reboot to Fedora, Fedora's time is then 7 hours early. For some reason I can't get both OS's to agree it's the same time.
View 10 Replies
View Related
Jul 24, 2011
A few hours ago, I ran "pacman -Syu" to update, and soon after it was finished the power went out for a few seconds, turning off my computer without properly shutting down. When I started it, the time was wrong (or maybe the time zone, since the minute is correct). It looks like it's exactly 4 hours behind (right now it's 18:53 here, but the date command says 14:53). Also, I have ntpd running, in case that matters.
View 4 Replies
View Related
Apr 11, 2009
I have the bar at the top configured to display the time but it is displaying 12 hours out.For example, it's now 16:49 but the time is displaying as 06:49. If I click on Adjust Date & Time it has the correct time in there and it is configured to display 24-hour format and is in the correct time zone. If I switch to 12-hour format it displays 6:49 AM which is clearly incorrect.I can't fix it because it thinks the time is correct when I try to change it.
View 4 Replies
View Related
Jun 2, 2010
I switched to zsh, but I dislike the completion. If I have 20 files, each with a shared prefix, on pressing tab, zsh will fully complete the first file, then continue going through the list with each press of tab. If I want one near the end, I would have to press tab many times.
In bash, this was simple - press tab and I would get the prefix. If I continued typing (and pressing tab), bash would complete as far as it could be certain of. I find this behavior to be much more intuitive but prefer the other features of zsh to bash.
Is there a way to get this style of completion? Google suggested setopt bash_autolist, but this had no effect for me (and no error message was printed upon starting my shell).
View 1 Replies
View Related
Jun 22, 2011
I have a switch tray on my computer and I installed opensuse in one of the hard drives that I have but as I switch between the windows hard drive and opensuse the time changes all the time. For example it's 10pm right now and if I switch the hard drive to opensuse the time automatically gets adjusted 4 hours back and then I fix it and when I switch back to my windows hard drive the time goes forward 4 hours. I check both region settings and they are both set to NY Eastern time. Why is it doing this?
View 2 Replies
View Related
Jan 20, 2011
My wife and I have:
iPhone 16GB 3GS on iOS 4.2.1 (not jailbroken)
iPhone 32GB 3GS on iOS 4.2.1 (not jailbroken)
We're running Ubuntu 10.10 and syncing our phones with Rhythmbox 0.13.1. It's painfully slow and skips songs sometimes. For 1500 songs, it's taking up to 5 hours. This is insane. I updated my apt sources and can mount our phones just fine. Syncing slowly is the only issue. I've read a ton of other reads about iPods having this issue as well, but not only were those issues never resolved by I haven't seen one with the actual iPhone.
View 6 Replies
View Related
Jun 14, 2011
I'm running Fedora 15 with current updates and kernel. I do not have anything special or non-standard about my configuration or setup. I use grsync to sync my home folder files to a remote rsync server on my network. I've checked my hard drives and my memory and everything else I can think. Here is the problem:
grsync will run for some time and once it nears completion it will crash. This, however, is no standard crash. It literally shuts my computer "OFF". I have shared the remote rsync folder through CIFS as well and I can copy those exact same files through nautilus with drag and drop without issue. I have had a few occasions where the rsync process will complete without issue, but this is a rare occasion. Since it powers my computer completely off I do not enjoy the luxury of having any log files or messages to attempt to diagnose from.
View 9 Replies
View Related
Jul 27, 2011
I have a problem,I want to change the hour format from 24 hours to 12 hours, I cant find the way to do this,
View 14 Replies
View Related
Mar 10, 2009
HandBrake is an audio/video transcoder (converter) for win, mac and Linux. Refer here for more info on HandBrake: [URL] Where you can find HandBrake with official GTK GUI, Here is where you can find itI for fedora 10:
x86 (32 Bit): [URL]
x86_64 (64Bit): [URL]
In case anyone is wondering how I found it, I was trying out mythdora 10.21.
View 9 Replies
View Related
Jun 20, 2010
read about handbrake the other day and thought I'd give it a try, so downloaded the fedora 12 rpm from here [URL] and tried to install with package installer but get the warning message
Quote:
The name org.freedesktop.PackageKit was not provided by any .service files
If there's no fix can I just cp the two files (bin [executable] and share) to /usr ?
View 4 Replies
View Related
Aug 8, 2011
How do I go about ripping the whole DVD? All Handbrake does is rip the first episode? Google gives instructions for Apple and Windows and they don't cover doing it in Linux. They make it sound like it's automatic. I hasn't been for me so far. Well at least until this DVD issue that follows. Since installing Handbrake and routine openSUSE 11.3 64 updates my DVDs are not mounted and the notifier doesn't pop up. Navigating to /media shows no DVD mounted. I realize this could be a hardware failing issue but the DVD spins up and flashes like it's scanning the DVD. A reboot to reset everything didn't solve this issue. If I stick a USB thumb drive in it's mounted and the notifier pops up.
View 9 Replies
View Related
Feb 7, 2010
I have Handbrake on my computer and as I don't use it, I want to know how to uninstall it. GUI terms, that would be great, as I don't know how to use command line (I find it confusing and complicated).
View 2 Replies
View Related
Apr 21, 2010
I'm trying to convert some files but the start button is grayed out.
View 7 Replies
View Related
Feb 26, 2011
I have a few live concerts in AVI format I wanted to convert to mp4 since that is the only video format the Google CR-48 currently sort-of supports. I can successfully convert a series of AVI TV shows, including a Pink Floyd concert in AVI. But if I turn around and try to convert a Pearl Jam convert in AVI format, it instantly says RIP DONE! with a 1.5kb file from the convert in the destination folder.
View 5 Replies
View Related
May 30, 2011
I have tried to find at tutorial on how to install Handbrake on Unbutu 10.04 command lin server,but cant find one?I have found the documentation on how to use it using commandlind here: [URL] how to install it.
View 6 Replies
View Related
Jan 11, 2011
Current HandBrake is 0.9.5 but doesn't do XviD encoding, so I want to compile 0.9.3 for Debian Sid.
I've added the Debian Multimedia repos for Lenny, which has 0.9.3:
Code:
I've got the build dependencies:
Code:
But when I try to get and build the source it fails:
Code:
How to further troubleshoot this compile?
View 3 Replies
View Related
Dec 23, 2010
I was trying to install the HandBrake slackbuild. It gave me an error saying it needed webkit, so I check for it in slackbuilds.org, where I found it. Listing said it required two things: libsoup and icu4c. So I downloaded the slackbuilds for those two and they installed fine, then started the install for webkit.
It did its build thing for about ten minutes, then it errors out, but the error message is pretty convoluted so I'm not sure what its telling me. Here's the last few lines from the terminal:
[Code]...
Anyone know what went wrong, and what I need to do to fix this?
View 2 Replies
View Related
Feb 27, 2015
Has successfully compiled Handbrake from source and got it to run? I've been trying to get this working for a while now, and everything I find on the interwebs is for Debian 7.6, and it seems as though things have changed a bit and those suggestions don't work.
I get this error when I try to configure it
Code: Select all : ../libhb/common.c:16:18: fatal error: x264.h: No such file or directory
: compilation terminated.
: make: *** [libhb/common.o] Error 1
View 1 Replies
View Related
Aug 2, 2010
I'm using openSUSE 11.3 with Gnome.I have installed Handbrake 0.9.4-1 from packman. After I installed it, I can choose the source, but Start, Pause and Add to Queue button are all grayed out.
View 9 Replies
View Related
Apr 13, 2010
It says that i can rip and encode encrypted DVDs in HandBrake but when i insert my DVDs it says that it doesn't support encrypted DVDs. Is there any kind of addon or plugin i need?
View 1 Replies
View Related
May 7, 2010
Handbrake simply will not encode. I've used it for a while now on 32 bit Ubuntu 9.10 and on 64 bit Windows 7 but since I've upgraded to 10.04 64 bit I can add a video as source and the encode button is grayed out. I cannot start encoding. The version of Handbrake I am using is 0.9.4.Does anyone have any idea how to remedy this issue? I am thinking of trying version 0.9.3 again.
View 7 Replies
View Related
Oct 25, 2010
Somehow I've messed up something in Handbrake that causes queued items to not run. I'd like to wipe out my settings and start over. What file/directory are these stored in?
View 2 Replies
View Related
Feb 18, 2011
I have been using handbrake for a long time to encode dvd's to mp4.The dvd's always resides on HDD in VIDEO_TS structure.Previously I always could select the folder as there was an option for that on the bottom left after you selected "source".Suddenly now that option to read the whole folder is gone. I can only select a single file. I didn't fiddle with it or anything. That option is just suddenly gone.
View 3 Replies
View Related
Jul 26, 2011
I'm using Handbrake 0.9.5 for encoding and I'd like to add a "hard-subtitle" to a video : the subtitle has to be a part of the video. I've seen on makeuseof.com that we could hard-sub a video thanks to the "Forced only" option. On Ubuntu 10.04 amd64, I don't have any checkbox for this option while importing SRT file. I've got the checkbox for "subtitles" I add by clicking on the "+ Subtitle" button, but it seems to be useless (I had a video_name.srt next to my video_name.m4v video file to re-encode). Is Handbrake now supporting only soft subbing ?
View 14 Replies
View Related
Oct 6, 2010
I've compiled HandBrake 0.9.4 from source as well as installed it with success(--enable-Gtk). However, many buttons (among them the 'Start' and the 'Pause' ones) do not seem to work at all-they are colored grey and I cannot click on them.Probably,it's a gui malfunction.
View 8 Replies
View Related
Jan 8, 2010
I downloaded an HD video from ....., but my computer is not powerful enough to play it. Is it possible to convert it to standard quality in Handbrake? If not, what video converter would be best?
View 2 Replies
View Related
Feb 21, 2011
I've looked everywhere I could but I must be blind. I have Ubuntu 10.04 Server and I'm trying to batch convert .avi to .m4v in folders and subfolders. I can't seem to find a script to do that.
View 1 Replies
View Related
Aug 13, 2011
I'm currently using handbrake (with the gui) to convert some video files to mpg4. It takes about 2 hours to convert an average movie is there anything a little speedier? I'm running a core2duo processor.
file types:
.vob ----> .m4v
View 3 Replies
View Related
