read about handbrake the other day and thought I'd give it a try, so downloaded the fedora 12 rpm from here [URL] and tried to install with package installer but get the warning message
Quote:
The name org.freedesktop.PackageKit was not provided by any .service files
If there's no fix can I just cp the two files (bin [executable] and share) to /usr ?
I was trying to install the HandBrake slackbuild. It gave me an error saying it needed webkit, so I check for it in slackbuilds.org, where I found it. Listing said it required two things: libsoup and icu4c. So I downloaded the slackbuilds for those two and they installed fine, then started the install for webkit.
It did its build thing for about ten minutes, then it errors out, but the error message is pretty convoluted so I'm not sure what its telling me. Here's the last few lines from the terminal:
[Code]...
Anyone know what went wrong, and what I need to do to fix this?
HandBrake is an audio/video transcoder (converter) for win, mac and Linux. Refer here for more info on HandBrake: [URL] Where you can find HandBrake with official GTK GUI, Here is where you can find itI for fedora 10:
x86 (32 Bit): [URL]
x86_64 (64Bit): [URL]
In case anyone is wondering how I found it, I was trying out mythdora 10.21.
I've been trying to install Handbrake (video converter) but its not in main repositories. So i went here and here to try and find a way to add the PPA. I got more or less the same error both times:
Code:
https://launchpad.net/api/1.0/~stebbins/+archive/handbrake-snapshots: <urlopen error [Errno 8] _ssl.c:499: EOF occurred in violation of protocol>
and this:
Code:
https://launchpad.net/api/1.0/~stebbins/+archive/handbrake-releases: <urlopen error [Errno 8] _ssl.c:499: EOF occurred in violation of protocol>
I need handbrake software so badly so I went to alien's slackbuild to download the handbrake.However,it ends with error after compiling-
Does it mean i miss something of gtk?
How do I go about ripping the whole DVD? All Handbrake does is rip the first episode? Google gives instructions for Apple and Windows and they don't cover doing it in Linux. They make it sound like it's automatic. I hasn't been for me so far. Well at least until this DVD issue that follows. Since installing Handbrake and routine openSUSE 11.3 64 updates my DVDs are not mounted and the notifier doesn't pop up. Navigating to /media shows no DVD mounted. I realize this could be a hardware failing issue but the DVD spins up and flashes like it's scanning the DVD. A reboot to reset everything didn't solve this issue. If I stick a USB thumb drive in it's mounted and the notifier pops up.
View 9 Replies View RelatedI have Handbrake on my computer and as I don't use it, I want to know how to uninstall it. GUI terms, that would be great, as I don't know how to use command line (I find it confusing and complicated).
View 2 Replies View RelatedI'm trying to convert some files but the start button is grayed out.
View 7 Replies View RelatedI have a few live concerts in AVI format I wanted to convert to mp4 since that is the only video format the Google CR-48 currently sort-of supports. I can successfully convert a series of AVI TV shows, including a Pink Floyd concert in AVI. But if I turn around and try to convert a Pearl Jam convert in AVI format, it instantly says RIP DONE! with a 1.5kb file from the convert in the destination folder.
View 5 Replies View RelatedI have tried to find at tutorial on how to install Handbrake on Unbutu 10.04 command lin server,but cant find one?I have found the documentation on how to use it using commandlind here: [URL] how to install it.
View 6 Replies View RelatedCurrent HandBrake is 0.9.5 but doesn't do XviD encoding, so I want to compile 0.9.3 for Debian Sid.
I've added the Debian Multimedia repos for Lenny, which has 0.9.3:
Code:
I've got the build dependencies:
Code:
But when I try to get and build the source it fails:
Code:
How to further troubleshoot this compile?
Has successfully compiled Handbrake from source and got it to run? I've been trying to get this working for a while now, and everything I find on the interwebs is for Debian 7.6, and it seems as though things have changed a bit and those suggestions don't work.
I get this error when I try to configure it
Code: Select all : ../libhb/common.c:16:18: fatal error: x264.h: No such file or directory
: compilation terminated.
: make: *** [libhb/common.o] Error 1
I'm using openSUSE 11.3 with Gnome.I have installed Handbrake 0.9.4-1 from packman. After I installed it, I can choose the source, but Start, Pause and Add to Queue button are all grayed out.
View 9 Replies View RelatedIt says that i can rip and encode encrypted DVDs in HandBrake but when i insert my DVDs it says that it doesn't support encrypted DVDs. Is there any kind of addon or plugin i need?
View 1 Replies View RelatedHandbrake simply will not encode. I've used it for a while now on 32 bit Ubuntu 9.10 and on 64 bit Windows 7 but since I've upgraded to 10.04 64 bit I can add a video as source and the encode button is grayed out. I cannot start encoding. The version of Handbrake I am using is 0.9.4.Does anyone have any idea how to remedy this issue? I am thinking of trying version 0.9.3 again.
View 7 Replies View RelatedSomehow I've messed up something in Handbrake that causes queued items to not run. I'd like to wipe out my settings and start over. What file/directory are these stored in?
View 2 Replies View RelatedI have been using handbrake for a long time to encode dvd's to mp4.The dvd's always resides on HDD in VIDEO_TS structure.Previously I always could select the folder as there was an option for that on the bottom left after you selected "source".Suddenly now that option to read the whole folder is gone. I can only select a single file. I didn't fiddle with it or anything. That option is just suddenly gone.
View 3 Replies View RelatedDoes someone have an average time on how long it takes for a DVD to AVI session should take? I have been converting some DVD to AVI and on a mac it takes roughly 20 minutes to finish, on Debian it takes over 2 hours, same settings, same options bitrate resolution etc. I cant see how going from 18x to 16x increases the time 2+ hours. So there must be somethinbg I am missing.Or if there is a better DVD to AVI ripping software available please share it.
View 2 Replies View RelatedI'm using Handbrake 0.9.5 for encoding and I'd like to add a "hard-subtitle" to a video : the subtitle has to be a part of the video. I've seen on makeuseof.com that we could hard-sub a video thanks to the "Forced only" option. On Ubuntu 10.04 amd64, I don't have any checkbox for this option while importing SRT file. I've got the checkbox for "subtitles" I add by clicking on the "+ Subtitle" button, but it seems to be useless (I had a video_name.srt next to my video_name.m4v video file to re-encode). Is Handbrake now supporting only soft subbing ?
View 14 Replies View RelatedI've compiled HandBrake 0.9.4 from source as well as installed it with success(--enable-Gtk). However, many buttons (among them the 'Start' and the 'Pause' ones) do not seem to work at all-they are colored grey and I cannot click on them.Probably,it's a gui malfunction.
View 8 Replies View RelatedI downloaded an HD video from ....., but my computer is not powerful enough to play it. Is it possible to convert it to standard quality in Handbrake? If not, what video converter would be best?
View 2 Replies View RelatedI've looked everywhere I could but I must be blind. I have Ubuntu 10.04 Server and I'm trying to batch convert .avi to .m4v in folders and subfolders. I can't seem to find a script to do that.
View 1 Replies View RelatedI'm currently using handbrake (with the gui) to convert some video files to mpg4. It takes about 2 hours to convert an average movie is there anything a little speedier? I'm running a core2duo processor.
file types:
.vob ----> .m4v
I have ripped quite a few movies onto my server and I play them on my PS3 with mediatomb. I haven't changed any of the settings in handbrake except I was playing around with the quality meter on the video tab. Some of my movies will play and others won't. The ones that do not play say something about an unsupported file type. They also will not play in Movie Player.
View 3 Replies View RelatedI'm trying to install HandBrake on my computer and it always comes back with the following: Error Package /home/Josh/Downloads/HandBrake-0.9.4-Fedora_GUI_x86_64.rpm could not be installed
Details:
Subprocess failed. Error: RPM failed: error: Failed dependencies:
libstdc++.so.6(GLIBCXX_3.4.111)(64-bit) is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
libwebkit-1.0.so.2()(64-bit) is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
rpmlib(FileDigests) <= 4.6.0-1 is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
rpmlib(PayloadlsXz) <= 5.2-1 is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
I'm using openSUSE 11.1 64-bit and as far as I can tell I've installed libstdc and libwebkit. I can't find (FileDigests) and (PayloadlsXz). I've searched around and couldn't find much on this.Don't the above errors mean that I do not have those packages installed, or am I just reading this wrong?
I'm trying to install Fedora 12 i386 using CD#1 for a minimal install. For that during installation I selected only Base. For some reason when I started installation it was trying to install 432 packages (Base has got about 80 or so packages). i can understand there might be some dependencies, but really that much? I kept going with the installation of 432 packages, but it finally failed on gtk2-immodule-xim-2.18.3-19.fc12.i686.rpm.I need just minimal install, so I can install LXDE later on by myself.
View 11 Replies View RelatedI have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.
I tried many parameters, including xdriver=vesa, and it cannot used graphical install.
So, I tried text install, which I have done many times in the past.
However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.
It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.
What is the point of this option?
Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.
What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?
I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
I am trying to install ndiswrapper in Fedora in order to install a Windows wireless driver.
Code:
su -c 'yum install kmod-ndiswrapper'
, I get this:
Code:
Loaded plugins: langpacks, presto, refresh-packagekit
[Code]...
Rhythmbox crashed and my radio stations disappeared. I'm not sure if this bears any relation.
I installed fedora 12 Constantine and the install gets to the point of rebooting once it's done with the reboot it goes right in to the login without creating a root account or a user account.How can I solve this issue, there has to be like 3 or 4 solutions to this problem I'm just new to linux.
View 3 Replies View Related