General :: Incorrect Time - Looks Like It's Exactly 4 Hours Behind ?
Jul 24, 2011
A few hours ago, I ran "pacman -Syu" to update, and soon after it was finished the power went out for a few seconds, turning off my computer without properly shutting down. When I started it, the time was wrong (or maybe the time zone, since the minute is correct). It looks like it's exactly 4 hours behind (right now it's 18:53 here, but the date command says 14:53). Also, I have ntpd running, in case that matters.
View 4 Replies
ADVERTISEMENT
Mar 6, 2010
I have a server running ArchLinux; I recently installed openntpd on it. Since I started paying closer attention to the clock, I started noticing other things; specifically when I run the "date" command, it's returned in PST when it should be "EST":
[spice@sandbox ~]$ date
Sat Mar 6 00:17:42 PST 2010
I have set the hwclock to localtime, configured "HARDWARECLOCK" to "localtime" in rc.conf, and chosen two different (but accurate) values for TIMEZONE in rc.conf:
[spice@sandbox ~]$ hwclock
Sat 06 Mar 2010 03:17:38 AM PST -0.922220 seconds
[spice@sandbox ~]$ cat /etc/rc.conf | grep TIMEZONE
TIMEZONE="US/Eastern"
[spice@sandbox ~]$ cat /etc/rc.conf | grep HARDWARE
HARDWARECLOCK="localtime"
However, as you can see, "hwclock" and "date" both say they're showing PST, although hwclock is showing the time in EST. I am not sure whether this was the case before installing openntpd. Is there another place where I should be setting the time zone?
View 2 Replies
View Related
Sep 18, 2010
I have an Asus laptop with both Win7 and Fedora. Whenever I change the time in Fedora to the correct time and reboot into W7 the W7 time is messed up - about 7 hours earlier. If I set W7's time to the correct time and then reboot to Fedora, Fedora's time is then 7 hours early. For some reason I can't get both OS's to agree it's the same time.
View 10 Replies
View Related
Apr 11, 2009
I have the bar at the top configured to display the time but it is displaying 12 hours out.For example, it's now 16:49 but the time is displaying as 06:49. If I click on Adjust Date & Time it has the correct time in there and it is configured to display 24-hour format and is in the correct time zone. If I switch to 12-hour format it displays 6:49 AM which is clearly incorrect.I can't fix it because it thinks the time is correct when I try to change it.
View 4 Replies
View Related
Jan 11, 2010
Does someone have an average time on how long it takes for a DVD to AVI session should take? I have been converting some DVD to AVI and on a mac it takes roughly 20 minutes to finish, on Debian it takes over 2 hours, same settings, same options bitrate resolution etc. I cant see how going from 18x to 16x increases the time 2+ hours. So there must be somethinbg I am missing.Or if there is a better DVD to AVI ripping software available please share it.
View 2 Replies
View Related
Jun 22, 2011
I have a switch tray on my computer and I installed opensuse in one of the hard drives that I have but as I switch between the windows hard drive and opensuse the time changes all the time. For example it's 10pm right now and if I switch the hard drive to opensuse the time automatically gets adjusted 4 hours back and then I fix it and when I switch back to my windows hard drive the time goes forward 4 hours. I check both region settings and they are both set to NY Eastern time. Why is it doing this?
View 2 Replies
View Related
Jan 20, 2011
My wife and I have:
iPhone 16GB 3GS on iOS 4.2.1 (not jailbroken)
iPhone 32GB 3GS on iOS 4.2.1 (not jailbroken)
We're running Ubuntu 10.10 and syncing our phones with Rhythmbox 0.13.1. It's painfully slow and skips songs sometimes. For 1500 songs, it's taking up to 5 hours. This is insane. I updated my apt sources and can mount our phones just fine. Syncing slowly is the only issue. I've read a ton of other reads about iPods having this issue as well, but not only were those issues never resolved by I haven't seen one with the actual iPhone.
View 6 Replies
View Related
Mar 16, 2010
Due to the recent earthquake, Daylight Savings Time was extended to April 3rd, but my Ubuntu machine set its clock back an hour last weekend, which was when DST was originally set to end. I manually reset the time, but when I resumed from hibernate the clock was wrong again. How do I turn off synchronization until April 3rd? More importantly, who needs to be notified of the change to get the problem fixed?
View 5 Replies
View Related
Apr 27, 2011
I just installed Ubuntu Server 10.4.2 LTS (32-bit) on Virtualbox 4.0.6 The install went great everything seemed to work. But after it rebooted for the first time when install completed, it is prompting me for a username and password. Note, the only username and password i was prompted to set up was for non-admin stuff. So i tried this username and password i created during install, but it keeps saying 'login incorrect'. I have looked at other threads, although they are mostly for older Ubuntu Server versions, but i couldnt really find anything.
I tried to reinstall and go through the install slowly but still the same issue. i tried Ubuntu for username and no password, tried leaving username and password blank, tried root and the password i created... i tried everything I could think of...
View 3 Replies
View Related
Mar 9, 2010
Within a VMWare ESX virtual machine, I am running CentOS 5.2. (Actually, it is kind of a virtual appliance to run CollabNet's Teamforge - which I have installed for a trial). I've been dabling with Linux for a year or so, but I know I have much to learn.
I'm attempting to run a cron job that runs a backup script at 11pm. It works great, but unfortunately it runs at 11:30 am.
I created the cron job using 'crontab -e', while logged in as root. My cron job line is : 0 23 * * 1,2,3,4,5 /etc/tjt_backup/collabnet_backup.sh
If I type 'date', I get the correct date/time in my timezone: Tue Mar 9 16:27:12 CST 2010
If I type 'clock', I also get the correct date/time: Tue 09 Mar 2010 04:26:57 PM CST -0.463330 seconds
(Although, it appears there is a little drift)
View 10 Replies
View Related
Jul 27, 2011
I have a problem,I want to change the hour format from 24 hours to 12 hours, I cant find the way to do this,
View 14 Replies
View Related
Dec 13, 2010
Between the dates 21-June-2007 to 12-December-2010 there are 1270 days. If the total cumulative time a hard drive has been active is 344 days (found this via Disk Utility in Ubuntu 10.10) since it was bought 1270 days ago. What is the average usage hours per day?
View 2 Replies
View Related
Nov 2, 2010
I have been doing this for quite sometime now, yet lately I wonder if this is what everybody does...I have a task that will run for hours. In order to not to interrupt that task when I logoff for the day, I issued the command:
Code:
at now 'sh ~/a-long-task'
Is this what everybody else does?
View 2 Replies
View Related
Sep 8, 2009
on my site now I'm using cache and need me cron script that will delete files older than 1 hour I have feature in my kloxo control panel just need me the command .
View 2 Replies
View Related
Jul 12, 2010
I was installing "wine" last night and since I knew it was going to take a while I closed the lid of the laptop and turned it upside down on the floor. (I always turn the laptop upside down when not using it otherwise might overheat)When I woke up this morning roughly 8 hours after I went to sleep the machine was turned off.Using the "last -x | grep shutdown | head -1" it stated that it went down at roughly 6 hours from when I went to sleep.The program I was installing got finished installing but I never set up an auto-shutdown program or anything of the sort.If this isn't a problem with linux then its a problem with my bios. If its a problem with my bios I will just have to live with it because my bios is locked. /var/log/messages says this:
Code:
alexslaptop logger: ACPI event unhandled: battery BAT1 00000080 00000001
alexslaptop shutdown[14933]: shutting down for system halt
[code]...
View 5 Replies
View Related
Dec 30, 2010
I'm having a VPS using Ubuntu 10.4 and i would like a guide on how to restart apache2 process every few hours (a time determined by me).
View 11 Replies
View Related
Sep 28, 2010
This is Plesk linux server.I am using CentOS release 5.5 (Final) OS. Server seem to crash every couple of hours. Perhaps apache has memory leak?
Sep 28 07:06:29 wed kernel: Call Trace:
Sep 28 07:06:29 wed kernel: [] out_of_memory+0x8e/0x2f5
Sep 28 07:06:29 wed kernel: [] __alloc_pages+0x245/0x2ce
Sep 28 07:06:29 wed kernel: [] __do_page_cache_readahead+0x95/0x1d9
Sep 28 07:06:29 wed kernel: [] __wait_on_bit_lock+0x5b/0x66
[Code]....
View 4 Replies
View Related
May 4, 2011
I was observing the following behaviour:
py script:
os.mkdir(path) #all OK
operations_that_take_10hrs_to_complete()
os.mkdir(path) # permission denied
like I lost my sudo rights after some time ..
View 1 Replies
View Related
Feb 11, 2010
i have a problem. when i changed from xp to linux mint 8, my speakers seem to just give up on me after about 2 hours of use. the only way i can fix them is to restart the computer.
View 1 Replies
View Related
Apr 17, 2011
I am totally new to unbuntu, I am trying to download ubuntu desktop but the message from IE 9 returns that "download greater than 12 hours"and that is that! my dsl connection is 6Mb and I do not know what to do.
View 4 Replies
View Related
Jan 4, 2010
Joined the Linux community last week with a clean install of Ubuntu 9.10 and the Edubuntu overlay onto my wiped Dell Inspiron 8000 with 512MB RAM (max allowed) and nVidia GEForce2 GO video card. <<lspci: 00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801BAM ISA Bridge (LPC) (rev 02)
[code]....
View 3 Replies
View Related
Apr 7, 2011
I am trying to write a simple back up script in python where I try to list the files that are 24 hours old in specific directories that I would choose.I read the manual of find and used
find . -mtime 1 > log.dat
to get the list of files in the log.dat however I also get the path information in that list as such
./hpc06MatlabCodes/2011/Apr/3dBoxModel
./hpc06MatlabCodes/2011/Apr/3dBoxModel/vfluidIrca10.dat
./hpc06MatlabCodes/2011/Apr/3dBoxModel/vLRecoveredSystem.mat
is there a way to exclude the directories and only get the files list.
View 2 Replies
View Related
May 16, 2010
Grub loading wait error 21 - system this way for hours
View 4 Replies
View Related
Feb 21, 2010
I just shrink my /home (lvm2 / ext3) and next to a reboot df give me this ouput:
Quote:
Quote:
So for my debian 265 + 2.2 = 281 ? the home is suppose to be set to 285 Go and the lv for the home to 285.17 Go
How to fix that? Or if I missed something when I shrink my home.
View 1 Replies
View Related
Oct 14, 2010
I try to setup a small Debian system running on command line. Remote access shall be possible via ssh (for now also telnet) and a serial connected minicom via getty. I need the serial access as fallback in case the network is down.
As long as the package adduser is not installed, I can login as root via telnet and getty without problem. But from the moment "adduser" is installed with apt-get, the serial root login always fails after entering the right password with the message "Login incorrect". Even de-installing "adduser", or using a brand new "adduser test" user. When installing and using SSH it allows to login successfully, like telnet.
BTW: A dangerous behavior I observed with telnet: When I opening the connection via telnet, I'm immediately logged in as root - without asking for a password! I set a password with passwd which also is requested by SSH and getty (before the adduser installation) but not by telnet?!?!?
The /var/log/messages adds a line if login with su, but nothing when fails with getty
Here is my inittab:
Code:
# /etc/inittab: init(8) configuration.
# inittab,v 1.1 2006-07-27 08:58:03 lothar Exp
# The default runlevel.
id:2:initdefault:
[Code].....
View 3 Replies
View Related
Apr 19, 2010
I have set up a new account, with a user name of Benjamin.However, when running a sudo command, while logged in with the user name 'Benjamin', I receive an incorrect password error.Yes, I am entering the password for user name 'Benjamin' and not that of the root account.
View 9 Replies
View Related
Jun 21, 2011
I just got a new laptop for work that dual boots with Windows 7 and Ubuntu 10.10.Normally, I can use an sslvpn connection to log onto my office servers to transfer data back and forth through Windows. However, I do my actual work on Linux, which the computing services department at the university where I work has not set up a sslvpn connection method for.I got the JRE set up on Linux and loaded up the sslvpn connection when I was asked for my sudo password. After following some other instructions, I created a different password to act as root.I entered that password over and over again and now I'm not able to attempt to connect again by trying another password.
View 3 Replies
View Related
Mar 23, 2010
I've never observed this problem neither did any of my colleagues trying to SSH into the same system. If I try logging into my server using a wrong username and then press ^C to terminate or exhaust my password attempts, I am locked out for at least an hour. Is there something I can do on my end to fix this problem?
View 1 Replies
View Related
May 2, 2011
I have an issue where under certain circumstances images containing yellow or close hues appear bright pink instead.For this to happen ALL 3 of the following must be true:
1. The image must be a PNG with a yellow, orange or a colour close to that.
2. View the image using a gecko based program (Firefox, Thunderbird)
3. Connect the monitor (Samsung Syncmaster P2250) to the graphics card (GeForce 8400GS) using the DVI cable.
JPGs always display correctly, the VGA port on the same card is fine. I can even have Firefox and Epiphany side by side on the screen showing the same url and Epiphany is fine. I normally use Fedora, however with an Ubuntu live cd the images are still pink if all the three criteria are true.
I don't have any other monitors or graphics cards to try unfortunately. If it were hardware, then why is Epiphany ok, if it were software then why does changing the connection to VGA make a difference?
View 2 Replies
View Related
Feb 11, 2011
Sometimes when I try to display the mounted device in linux it displays devices which are not currently mounted. I want to correct this this using script.
View 1 Replies
View Related